GreAt help. I did it with 115mm grinder and cross hatched. This allowed the hammer to just pop off each ‘block’.
@MattHutton4 жыл бұрын
Awesome!
@DerekTJ3 жыл бұрын
Even better. I've awful 1949 loopy stipple render to remove and this sounds good.
@bigbigsky8878 Жыл бұрын
Looks like a good technique to get the worst of it off, what did you do to get that remainder off? Same tools and technique?
@darrengreen22654 жыл бұрын
It's a 9" angle grinder with a diamond tip blade👍
@tumbleweed7260 Жыл бұрын
Haha i was saying it for him as well, camera nerves make ur brain go dead
@cocospops93514 жыл бұрын
Great tip m8. I have a lovely stone house that some bastard put pebble dash all over and I want it all gone. Also have block extension with pebble dash, can I just render over that do you know?
@cocospops93514 жыл бұрын
@Brit Mk 2 No I want to know if I can render over the pebble dash, as in not remove it at all and render on to it.
@cocospops93514 жыл бұрын
@Brit Mk 2 Thanks mate. Already stripped sand cement plaster from the interior walls and repointed all the stone work with lime 👌 Going for a full and authentic restoration.
@joejoejoejoejoejoej Жыл бұрын
Great idea I thought the same process ….. One suggestion …… would an SDS comb blade be better than a plain blade ?
@NoizPuhr4 жыл бұрын
The pebble dash I'm trying to remove is a bastard to get off
@MattHutton4 жыл бұрын
You might be able to render over it.
@NoizPuhr4 жыл бұрын
The thing is though I'm trying reveal bricks underneath it because I think the pebble dash looks shit
@MattHutton4 жыл бұрын
arthur callahan managed to reveal any cleanly so far?
@NoizPuhr4 жыл бұрын
Some but the bottom is getting thinner and the jack hammer is just skimming the rest of it
@MattHutton4 жыл бұрын
arthur callahan I would have thought it would be very difficult to get a clean exposed brick finish after render has been on top. But good luck. Let me know how it goes :)
@a1p2b322 жыл бұрын
wall chaser would have been better for scoring because you can set the depth
@NANDOFFDataRecovery Жыл бұрын
Thanks buddy the theory makes sense, think you might have saved me some stress.
@jonathanmcrae37284 жыл бұрын
Would u recommend using same method on pebble dash. Mine seems thicker though.
@MattHutton4 жыл бұрын
Worth a go. If the pebble dash isn’t painted you may be able to render straight over the top. I’d ask a renderer if pebble dash provitamins sufficient key.
@plummetplum3 жыл бұрын
Good tip.
@MattHutton3 жыл бұрын
Glad you liked it
@conscientiousobjector95552 жыл бұрын
Wow! Great job.
@lariyo91223 жыл бұрын
Any issues with doing this on a wet day? Been doing on my day off and the rain won't stop
@MattHutton3 жыл бұрын
Water will absorb into the brick but shouldn’t be an issue if it’s not exposed for too long.
@tomtresco2952 Жыл бұрын
Oh yeah that looks well easy
@squidlings5 жыл бұрын
Haha, i get the technique but you made it look harder with "fault lines" gonna go try this now. Got a nightmare job on my house. One i wish i didnt start now i know how tough it is. 😶
@MattHutton5 жыл бұрын
It is a pain in the arse
@squidlings5 жыл бұрын
@@MattHutton your trick worked really well...but once i got a good chunk off...everything just started to fall easily. 💪🏻
@MattHutton5 жыл бұрын
Squidlings good stuff :)
@crocusinmaymay28354 жыл бұрын
@@MattHutton What do you do to repair the damaged / scarred bricks ?
@MattHutton4 жыл бұрын
crocusinmay may render over the top with fresh render
@JustinGreenwoodDelgado5 жыл бұрын
I like your vids and advice but please get a cheap tripod
@scotturley40035 жыл бұрын
Wow, that job sucks anyway you have it
@BigCheese854 жыл бұрын
Are those tampons in your ears??
@MattHutton4 жыл бұрын
Yes
@ljd85204 жыл бұрын
Why were you removing the render? So that the wall can be re rendered?
@MattHutton4 жыл бұрын
Yes, because additional brick work was added and I didn’t like the look of the old render
@ljd85204 жыл бұрын
@@MattHutton were the bricks laid on a new footing or off a steel angle bolted to the wall ?
@mrboyban2 жыл бұрын
Still a pretty hard job mate
@Southpoint20194 жыл бұрын
Don’t worry Matt these ignorant comments are from people who prob work in Tesco and get about 300 a week whilst you get to pick your jobs and customers all year and get about 800 per week minimum.
@xxadamd84xx643 жыл бұрын
Your comment shows you're more ignorant than the people you are bitching about. Smh
@Southpoint20193 жыл бұрын
@@xxadamd84xx64 ignorant but still true
@TimboTbagz2 жыл бұрын
I swear all tradies like to think they're raking it in lol
@Southpoint20192 жыл бұрын
@@TimboTbagz well here is some honesty By tomorrow I would have done 3.5 days this week and after tax I’ll take home £982 without a labourer with me. Now if it was 5 full days do the math
@TimboTbagz2 жыл бұрын
@@Southpoint2019 You're very likely not earning 60k+ on the tools mate. No offence but I've heard it all day for years and it's rarely true. Same guys who say this have finance cars usually lol.
@Ineedahandle752 жыл бұрын
Hmm.
@sherwin19884 жыл бұрын
Forget this mate just render over it! 😂 also the wall would have already been reasonable flush 👍
@plummetplum3 жыл бұрын
Rendering over paint needs proper prep, What's your recommendation?
@sherwin19883 жыл бұрын
Pva the fuck out of it and move house within 24 months of the job 😂😂
@jostantonstanton60064 жыл бұрын
Nice try no diff
@Ineedahandle752 жыл бұрын
🤣🤣👍
@amybrown74536 жыл бұрын
I was scared that you were going to hurt yourself on accidentally