How To Choose and Install LED Retrofit Lights for Home | Recessed LED Can Light Installation

I will show you how to choose and install LED retrofit lights for your home. Recessed LED can lights are the most popular lighting option there is but there are so many questions about what are lumens, kelvin, and what should go in each room. I go over all of this so that you can make the right choice for your lighting needs.
Items used in the video:
4 Pack Commercial Electric LED Retrofit Lights: amzn.to/3qimEVN
Tools that every DIY'er can use:
Klein Tools Multimeter: amzn.to/3qfj6Ul
Budget Friendly Cordless Drill: amzn.to/2KNYbXZ
Screwdriver Set: amzn.to/2KZYmQb
Driver Set: amzn.to/3qnfwaO
Level: amzn.to/2JEMaDB
Angle Grinder: amzn.to/3qgsRBw
Circular Saw: amzn.to/3qhcQex
Thank you for watching and for subscribing. You can support the channel at no cost to you by using one of the above affiliate links. This helps support the channel for new content!
Blessings,
Adam
#ledlight #ledcanlight #ledretrofitlights

[@spitfyre1551]

Just did this and only thing I wish my kit had was a foam gasket just to help better air seal.

[@degen_dad7682]

Love how far you have come

[@danbennett8026]

Thinking bout doing mine soon. Thanks for the vid. Very helpful

[@HowToHomeDIY]

Glad it was helpful! They are really nice to have!

[@kingtutt61]

Great video! Not too long….and to the point, information. Thanks

[@StefanieTrimble]

So helpful thank you for sharing and breaking it down to simple steps!

[@HowToHomeDIY]

You are very welcome! I am glad to hear it was helpful. Thank you very much for the feedback Stefanie!

[@Fmgcoyote_223]

Wow! Great video man!!

[@pdogakron1623]

I just bought a zillion or so 2700k lights for my basement, but have 5000k (switchable) LED wafer lights in my kitchen and dining room. I have a dimmer on there for softer light, but we like the daylight for the kitchen.

[@HowToHomeDIY]

Yeah the higher kelvin level is definitely ideal in the kitchen, helps to see better what you are doing and keep things clean! Glad to hear you found the combination of lighting that you like and works for you! Thanks for the feedback!

[@elijonam1]

could you please make a video on installing the downlights when you don't have access to the above.

[@aemsiw3798]

What do you do if the area where the original fixture was has wires instead of the part where you can screw in the the led recessed light?

[@dlebman]

Is there a video on replacing 4 pin florescent with these bypassing the ballasts?

[@Doober5020]

I bought those exact same light , except the old ones are the 2 pin fluorescent bulbs . What do I need to do to make the new ones work ? Re wire ? Thanks

[@stephenhoward5241]

Great job

[@Jeff1960G]

Hello, thank you for the video! After installing these LED lights, I have a "humming" noise when i turn them on to full power. I have 3 cans on 1 dimmer; and when that dimmer it low, no noise, but when full power, humming. I did not have that problem with my 60 watt canned bulbs. Any idea?

[@HowToHomeDIY]

Hey you’re welcome! First thing I would check is your dimmer switch. It may not be compatible with dimmable LED lights.

[@danchelu8904]

I have 4 recess led lights and hear a buzz when they are on. I tried changing the switch but with no result as buzz is still there. What advice can you give me? Thank you

[@MrJaccdem]

What happens if i have no hooks in the Can ? Can’t get light to stay in

[@andrews7993]

I have the same exact issue. No hooks in can

[@jaykuptake]

What brands do you recommend?

[@bubcasto]

When the light goes out, how do you change it?

[@HowToHomeDIY]

You would just remove the whole light housing and install a new one. The bulbs inside aren’t made to be replaced like you would a regular light bulb. Hope this helps!

[@bubcasto]

@@HowToHomeDIY thanks!

[@HowToHomeDIY]

You’re welcome!

[@judmcfeters9054]

@@HowToHomeDIY and this is why I think this is not that great of a solution.

[@HowToHomeDIY]

I mean, haven’t had one go out yet and I have a ton of them.

[@leungfy1]

I have lytecaster 1176 cans, which don't hold clips. Can I remove the cans and the bulb socket from the cans and use the kind of retrofit lights with tabs (to grab the edge of the holes in the ceiling drywall) and connect the pigtail to the socket? Is it safe to install the light without using any can at all? Does the socket/pigtail gets hot once connected and powered?

[@HowToHomeDIY]

Yes you could do that and that is actually a really popular option. I recently installed them in a office and they worked great! I would say the socket gets pretty warm but I would not say hot. All relative to who you ask I suppose. Hope this helps!

[@leungfy1]

@@HowToHomeDIY Some advice that electrical connections must be enclosed by a junction box to protect it from fire. In this case, the connection is made by screwing the pig tail into the light bulb socket. I am just not sure how safe this is

[@HowToHomeDIY]

You’re going to have to check with your local code and make that call for yourself. Most of the clip in leds that I have seen come with a junction box that gets wired into directly. A junction box will more than likely be required. I wish I could help you decide but I am not an electrician and this video and channel are for entertainment purposes only.

[@ajingram2113]

Thsnkyou

[@HowToHomeDIY]

You are very welcome!

[@ajingram2113]

@@HowToHomeDIY you helped me out a lot, thanks

[@paulb8188]

Why didn't you mention the model # of the lights that you are using?

[@HowToHomeDIY]

I think I put a link to them in the description.