How To Clean 3D Resin Prints Without A Wash & Cure Station

How To Clean 3D Resin Prints Without A Wash & Cure Station - Triple Dunk IPA Technique

Рет қаралды 47,768

Күн бұрын

Пікірлер

@absolutelyfookinnobody2843 8 ай бұрын

Yes, I agree about the respirator. BUT there are different respirator for different things. Make sure you know what to get. Is resin fumes considered vapor? If so, then you want a respirator for vapors

@g.o.a.t9804 10 ай бұрын

QUESTION: Do you mix water with the IPA in those 3 containers?? Or their all 100% IPA?? Thanks

@GreySectoid 8 ай бұрын

Very good information, much better than the other channels, thanks.

@David-ey9jg Жыл бұрын

Why not use the one basket and move it to each tub?

@LanceJoshlin 10 ай бұрын

You’d probably risk dragging trash resin over with it. Also I’d imagine those jars came with the baskets so why not use them, transferring the prints between baskets allows for a little more cleaning during the transfer process.

@imsteampowered 8 ай бұрын

Thank you for sharing this fantastic video! I own an Anycubic Photon M3 Max, and I've been experiencing some difficulties when printing a bottle cap. I recently acquired the Wash and Cure Max, and I must say, your approach yields much better results! However, I'm struggling with resin layer separation despite printing at a thickness of 0.05 as per the ABS-Like Resin Pro manufacturer's recommendations. Any advice you could offer would be greatly appreciated. Awesome video!

@CarlyGaudreault 10 ай бұрын

This felt like one of those "perfect" videos, where start to finish, you're professional, informative and offered the links that will help us out a ton!! Thank you for this :) (I've got all the Amazon links open in new tabs!)

@UZRome Ай бұрын

Post print do you need to pour the left over resin liquid back into the bottle or the can you leave the resin in the bed?

@Slurgical_3D_Terrain_Channel 10 ай бұрын

Thanks, I surely be going to watch the rest of your video and channel. I haven’t made the leap yet to resin, but this will certainly prepare me.

@craigv367godsman4 6 ай бұрын

Great video and very informative. Thank you for sharing the links to all the supplies. Can you tell me what size the tray is and where you got it, the one you use to scrap the parts off the build plate into.

@AbdulAziz-cj4hg Жыл бұрын

I live in tropical country, would you recommend to use sunlight to cure? And why do i need to dry it overnight, what big differences it would make?

@Silver803 Жыл бұрын

You can use sunlight, it just takes longer. instead of a few minutes itll be several hours

@valentinfigueroa5663 Жыл бұрын

you'd want to make sure prints are dried completely or risk the chance that they'd leave a chalky white residue when they cure. Drying it overnight is extensive but long as they look dry enough, you should be good

@darkangel8989 Жыл бұрын

How long does it take your flashlight to cure trace / very small amounts of resin when cleaning up as you described to make it safe?

@3DPrintingMinis Жыл бұрын

Resin is toxic so I'm not sure it's every actually 100%. You'll need to contact your resin's manufacturer for an answer to this question.

@rexmagi4606 5 ай бұрын

Concerning the "drying over night", I dont think they are drying from the IPA, they're just chilling. 99% IPA dries in like a minute or two if its just a small coating and does not leave residue. Just pointing that out.

@oecw124 16 күн бұрын

By the time I remove supports from multiple minis they are dry, using 91% ipa

@jaimemagana4868 Ай бұрын

Hi! I´m new to this. I tend to make a mess of my working area when removing and cleaning the prints. Are those silicone mats easy to clean? How do you dspose of supports and papers? Cure it and to the trash? And how do you clean the utensils? (Spatula, funnel....) Could yo make a simple video on that? sometimes the easiest things tend not to be explained in detail.

@charlesroth6581 4 ай бұрын

Nice surf boards dude 🎉I surf myself working on my first mini print from elegoo mars 3 thanks for the helpful tip

@marcocerda3777 6 ай бұрын

Just out of curiosity not sure if you said it in the video briefly and I missed it but how often do we change the alcohol from the containers?

@JohnSmith-rt5yq Жыл бұрын

What is that blue.... Towel? In the box. Is it disposable? Im using a tupperware but no towel and its messy... If i know what that is, i may pock up some of that blue towel.

@nightworkstuido4249 11 ай бұрын

It’s just a normal work shop paper towel

@Avymit25 Жыл бұрын

How long do you put the prints under a UV light after washing?

@3DPrintingMinis Жыл бұрын

It depends on your resin brand and curing station. With my setup I cure my miniature prints for 3 mins.

@kalzyoung 4 ай бұрын

How can I stop the resin from running? Sometimes it keeps running after I paint them. Please tell me what I’m doing wrong

@PokeMonster_Pulls_Minis Жыл бұрын

Just curious why did you go from Mean Green to IPA? Trying to maybe go with less of an aggressive chemical smell and was thinking towards the mean green. Thanks.

@3DPrintingMinis Жыл бұрын

I figured out a way to clean my prints without needing the ultra sonic cleaner. Plus, when the ipa gets dirty I can transfer the good top part to another container and then cure and evaporate off the unsalvageable remaining ipa. Using the Simple Green made too many containers of murky waste liquid that I needed to take to the special waste dump. And ipa has come down in price considerably since the height of the pandemic, so it’s easier and more affordable to get.

@glennedward2201 Жыл бұрын

@@3DPrintingMinisYou’re using the Ultrasonic incorrectly. Please don’t put any chemicals in your ultrasonic besides distilled water. My ultrasonic has a basket in it because parts should never touch the bottom. Use a smaller Tupperware container and lid with IPA and set it in the basket of the ultra sonic being sure that its submerged. If needed you can hot glue some weight on the bottom so that it wont float. Leave it in there 3-5 minutes and let it clean your parts. This is much better than a shake, or stir. That is it, nothing else and and guess what? Now you can use your ultrasonic for any type of cleaning and by always using the proper cleaner per item and never contaminating the ultrasonic machine it saves time, materials, IPA, etc, and most of all it saves your equipment. Give it a try.

@Ывэоэх Жыл бұрын

@@glennedward2201именно! Вы говорите о том, чтобы погрузить контейнер в объём воды, при этом не касаясь дна. Блестяще!

@lisapupillo1724 3 ай бұрын

You don't have to put them under a UV light after washing them?

@Starburst7641 3 ай бұрын

He mentions he is using a UV flashlight for this purpose

@jonathanoverlin795 4 ай бұрын

does the IPA eat the basket?

@ZygiArtStudio 11 ай бұрын

Did the draying models are still toxic after wash?

@zaxn.6221 2 ай бұрын

how are these buckets called I can't find them online

@ottostillen 2 ай бұрын

Pickle Jar 24oz 2Pack Pickle container with strainer Pickle Holder Keeper Lifter, pickle storage container pickle strainer,Flip Jar with Leak Proof and Lock It Lid.

@Zombie51324 Жыл бұрын

We’re is the link to the respirator and the flashlight

@3DPrintingMinis Жыл бұрын

Respirator mask with Filters Set - Reusable Half Facepiece Cover with 4pcs: amzn.to/444TP1U Whaply Black Light UV Flashlight, 51 LED Blacklight Flashlights: amzn.to/3NiWeQa

@jamesdenny4734 11 ай бұрын

Didn't you just wash n later cured these items at a makeshift station?

@Emtbtoday Жыл бұрын

The cleanest dirtiest IPA kve seen yet haha

@3DPrintingMinis Жыл бұрын

I try to take care of my stuff. It gives better prints. -)

@InitiallyJB Жыл бұрын

I like your set up but why no glycerin.

@3DPrintingMinis Жыл бұрын

Because that’s not what I’m using in this video.🤷‍♂️

@Sin_Alder Жыл бұрын

Honestly, I'm kind of shocked that you talk (and now that I think about it, a lot of people the resin print) about the IPA burning your nose, but not seeming bothered about taking the prints out of your printer. Personally, while I wouldn't call the smell of IPA pleasant, resin stinks to high heaven for me, even through a mask, and IPA doesn't really burn my nose either. If just dealing with IPA was the only thing I had to worry about with resin printing, mine wouldn't be collecting dust in the attic until I decide to take another crack at it.

@IIIReptarIII-TCPH Жыл бұрын

If you can smell the resin through the mask, you have a poor seal / bad respirator. A N95 isn't going to help, you need a full on respirator mask. I suggest the PD-101 full face, and remember the cartridges only last about 3 hours before you need to change them. Hope this helps.