How to Clean an Intake Manifold Inside & Out (Remove Carbon Buildup)

[@EJBermudez]

Did this to my son's intake and it made a huge difference. I recommend this video to anyone pulling an intake to take the extra time to clean it out nicely.

[@martinbuilt]

I'm glad you liked it and found it most helpful. Thank you for watching and recommending this video.

[@Chayliss]

What about engine side????

[@gregkeller80]

That looks like the perfect brush to clean between the truck bed and cab! I’ve been looking for something like that for years lol. Thanks!!!!

[@BioExtract]

A simple, honest, demonstration of a process that works. Thank you sir, very useful information!

[@martinbuilt]

So nice of you, thank you. 😎

[@gordonclark7230]

Thanks

[@gregcorley4809]

This is is perfect! Recently picked one from salvage yard and needs to be cleaned. This couldn't have come at perfect time, Thank you Martin!

[@ravenn.francis7434]

Greg Corley same here got it today and this is helping greatly

[@donnarichardson2888]

Thank you so much Martin!! I cleaned mine on my 91 chrysler lebaron 3ltr v6 wit 87,000 original miles. It was full of carbon on upper and lower intake manifolds. I didn't use the purple power I used dollar generals LA's TOTALLY AWESOME degreaser and cleanser for about $1.50 half gallon took longer as I couldn't fine any of ur stuff. I also uses the long lint brush. Ur a life saver! Wish I could send u b4 and after pics, shining like a new dime! Have a Blessed day!!!❤

[@Anēudís7]

I'm going to do this I took my intake manifold out for this exact reason. Question where can I get a long brush.

[@torque258]

Another good video! Very handy. Are we just going to ignore the fact that he's a ghost? Love the entrance!

[@climbjt]

Took mine to a machine shop. For $40 they put it in a ultrasound tank. Even the brass nut-serts came out shiny

[@joesyoutubepage]

free

[@TranceFur]

No Joey, not free. $40 he said.

[@dhalsim-1]

$40

[@chrismason1167]

Lol

[@frozenking9394]

lol lov da knowledge bout to put all my old bolts back on lol for dat same shine

[@irvonovisuals]

Purple power is one of the best degreasers out there. Use it to clean my engine bay and does wonders.

[@nariwalsh]

Thank you so much for this! My car was so gummed up inside I wasn't sure what to do. This helps me out a lot!

[@martinbuilt]

Thank you for watching, I'm glad to hear you found this video help.

[@monkeyslap]

This should be retitled to "Giving Your Intake Manifold a Colonic"

[@graysonsamples8096]

Lmao

[@Ben-nx7yy]

😂

[@koolkeith7285]

Really great choice of music. Thank you for giving me more inspiration to turn my car into the badass it was once made to be

[@martinbuilt]

I'm glad you like it. Yes this intake has been one of my best improvements for the 4.7

[@351cleavland]

Thanks for the video. FYI-that Puprle Power is great stuff BUT be careful as it can disolve concrete. I spilled some in my garage floor a the spot started to become rubble.

[@martinbuilt]

Yes I've actually used it for a driveway cleaner before and it does work well but you gotta work fast because it can remove the finish. You need to rinse it thoroughly with water.

[@johnsauer8508]

Thank you for doing this video. It was spot on for what I was looking for. I got the lint brush, and of course the purple power and the results were just as you demonstrated. 2006 LS intake looks brand new.😊

[@Verdandi_P]

It's so cool how he has the ability to phase in and out of reality. Oh and yes thanks for the car help .

[@martinbuilt]

Glad you enjoy the disappearing act. 😉

[@animationcrate]

@@martinbuilt thanks man. My dad is really good at that, I've been waiting 22 years for him to come back

[@christopherdubay3148]

​@@animationcrateprob got lost getting that milk

[@delb6923]

Purple Power every drop is like Gold, good stuff!

[@martinbuilt]

Thank you for watching.

[@shawnderrick1952]

Another great and effective product for cleaning oily and carboned-up engine parts is professional HVAC outdoor coil cleaner.Some name brands are "Nu-Brite" and "Foam-N-Clean",with several store brand type knockoffs as well.These are concentrated alkaline products that react with the aluminum fins on the outdoor coils by foaming up and lifting off any dirt or corrosion,but they also work very well for soaking freshly disassembled nasty parts from a junk motor,for example,or any other metal part.I would not use it on that plastic intake,and it is very caustic and corrosive,so rubber gloves and caution are mandatory,as is heavy rinsing with the garden hose,but the stuff works great!Just FYI.Also, your vids were very informative during a recent rebuild of the 4.7 in my 2000 Grand Cherokee.Keep'em coming!

[@RbNetEngr]

Nice job making this video and describing all the steps involved.

[@martinbuilt]

Thank you. I really appreciate that. I'm glad you liked it and found it helpful.

[@wellnessotr]

I’ve never cleaned my intake, but it definitely needs it! I’m cautious about what kind of chemicals to use on my plastic intake because I don’t want to have to buy a new one.

[@martinbuilt]

Those plastic intakes would probably stand up to most any chemical like the one I used or purple power, super clean, totally awesome.

[@fireyourrocketts]

Just realized need to clean the one in our 2004 Corolla that is being engine overhaul, ordered Simple Green HD Purple as it wins a review vs Purple Power as more biodegradable. Will do that as soon as it arrive. Thank you for the great video.

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful.

[@quarkymatter]

What about the part of the engine that the manifold attaches to? Most of my residue is in that part, but I dont want to spray any liquids in there. Is it safe to use air compressor?

[@yes.orjust-no]

Did you ever find the answer to this?

[@barrynzay]

Great video. I had the idea to use purple power on my upper intake too after needing to replace the bushings on the intake manifold runner control valve of an 02 mustang and wanted to find some videos of how other people cleaned theirs and this was very reassuring. I think I'd get along well with this guy if we ever had to work on a vehicle together.

[@gregj.gotham4402]

I like the links to items used during your videos. I purchased the brush from your link thank you. Your videos are the best giving all information as you do your work very good explanations.

[@martinbuilt]

Glad you enjoyed it and found it helpful, and thank you for purchasing through the links that helps out the channel.

[@ricer0cket25]

Super clean works really great too I like purple power also

[@rbsizzle]

I just sourced a liquid intercooler from a Ford Super Duty to use on my project (because I'm cheap and re-purpose parts from other cars). Anyways, I didn't know how I was going to clean all the carbon out the damn thing. Saw your video, went to Sam's and bought a knock off purple power, let the thing soak, and now its spotless. Thank you so much.

[@martinbuilt]

that's awesome, thanks for watching!

[@joelh3030]

My 1.8 corolla has oil dripping from the bottom on the manifold, I will be replacing my PCV valve and cleaning my manifold the same you just did. Thanks for the video!

[@martinbuilt]

I'm glad you liked it and found it helpful. thank you for watching.

[@moonrocktank7771]

If only this video had come out last week when I had my intake manifold out😢, Great video btw though👍

[@martinbuilt]

Thank you!

[@manufacturingdefect1287]

Haha take it out and clean it😉

[@moonrocktank7771]

manufacturing defect Cant😢, it dropped a valve about a month ago

[@manufacturingdefect1287]

@@moonrocktank7771 sorry about that

[@ascendantrobin3230]

Martin, your vids are always informative and inspiring! Congrats on your success thus far! God bless, and keep Jeepin’ 😎

[@GeloNegron]

Zep Purple!!! Works AMAZING and delete your PCV Valves Ladies and Gents! After that you can even go the extra mile and cut off your cctalytics, car will not smoke or make more emissions BECAUSE you eliminated the PCV system.

[@wtzszombiesprod.3666]

that's a whole lot dirtier than I expected. Lm7 5.3 got mine off, shes definitely getting the same treatment, nice video boss

[@martinbuilt]

Thank you, glad you liked it.

[@bobruediger7468]

Your videos are very educating and clearly shot. Keep the the good work

[@martinbuilt]

Thank you, Bob!

[@tedthornton7791]

How about the mating area on the actual engine? Got any videos on doing that? Great job

[@williams6550]

Purple Power is the best. Good tip about getting water from the bottom of the heater, by the way!

[@gordonclark7230]

😅 thank you so much how do you put EGR tubing back in the upper intake

[@jaredchance8903]

How much would a mechanic charge to clean the intakes???

[@donaldrippetoe5246]

I really appreciate your video! It really helped me quite a bit! Thank you for sharing!

[@martinbuilt]

You're very welcome I glad you liked it and found it helpful. Thank you for watching 😁

[@writtenpieceopaper1]

Thank you sir. Doing this on an 07 silverado. Getting that brush.

[@davecpgh]

One quick note: Purple Power is corrosive. (Labeled on the back of bottle) You need to take off anything metal on the manifold. Such as that 1 bolt still in there. Did this video a year ago, that bolt is most likely completely rusted now and the others look good as new.

[@martinbuilt]

I've been using purple power for 15 years to clean engine parts as long as you don't let it soak In purple power for an extended period of time especially with aluminum it's perfectly safe I've never had any parts rust due to purple power. And as explained in the video to thoroughly rinse the product after cleaning it with purple power. Otherwise you will end up with a chalky residue especially on aluminum parts..

[@robkcra]

I know that this manifold was obtained separately from any vehicle currently in your garage, but I have to wonder what the head would be like on the vehicle from which this manifold was taken? Specifically, if the head was in the same dirty condition as the manifold......how would you deal with it? Thank you.

[@brendenbynum6810]

Glad i watched this😂 i was going to use my intake off of my blowed up engine and well there was remains of a piston and rings in there small enough to definitly ruin the other engine

[@martinbuilt]

Yeah you gotta be real careful with used intake manifold especially if they came off of engines that blew up because it will literally suck stuff from one intake runner to another.

[@ninjagodzilla6402]

Just changed the knock sencors on my 4.8 vortec engine.when i pulled that intake manifold off ive never seen so much carbon buildup in a engine like that.i have 421,000 miles on it & it shows it.im defintly about to purple power that rascall.thanks.

[@martinbuilt]

After cleaning it up with purple power you may consider installing a oil catch that will keep that intake manifold clean.

[@yes.orjust-no]

@@martinbuilt do you have a video of an oil catch installation? Next video?

[@sugrue8526]

Yup PCV valves are goof idea. Don’t want harmful vapors in the atmosphere. But if you want get a car to run well, hose it all out all over the ground. Need PCV, just don’t need to run it into intake

[@yermiyahbenisrael7182]

Thanks for the video. This was real helpful

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful.

[@Arrambide02]

My intake on my Chrysler has a runner that opens the flaps to allow air to come in manifold. If After I clean out all the carbon if I spray some WD-40 on the runner that controls that flapper would that cause issues? The friction of the runner due to the carbon buildup is causing my car to code.

[@matthewbim10]

New viewer here, thank you for your view on this procedure.

[@martinbuilt]

Glad you liked it, 😊

[@greghubert4968]

Another project on my list to do, Thank you Martin

[@martinbuilt]

Have fun!

[@jamesdewer]

I recently upgraded with a new engine for my 4.7. I went with a 2008 intake manifold. Let me just say after you go to the larger intake you can definitely want to go with mid-grade gasoline. So that didn't take manifold a different throttle body 70 mm and different intake injectors I went with four port and removing the torque management was easily a 35 horsepower increase.

[@martinbuilt]

I'm glad to hear it all worked out as I would expect. Yeah I would say I gained probably the same horsepower that you're claiming, it sure felt like it anyway.

[@jamesdewer]

@@martinbuilt oh yes the jump to mid-grade 08 intake injectors, new motor 😎, torque management delete. Big games in horsepower it runs like a proper V8

[@jamesdewer]

I also did a full suspension rebuild. My frame straightened. Could I send you pix?

[@jamesdewer]

Hey Martin, So after I got the new engine. It smoked a bit for about the first 200 miles then settled in nicely. Around 1500 mi I had to bring it into the shop. It's in the shop now actually. It was smoking bad It was letting out a cloud of white smoke I'm not sure if it's water getting in the cylinders or what? Compression felt good though just the smoke man, was eating oil. It's also detonating a little so I'm thinking non- Mopar cheap ass hydraulic lash adjusters went flat.

[@cullenkline6893]

Any recommendations to dry the manifold quickly?

[@martinbuilt]

Perhaps take your Shop-Vac place it into the throttle body end of the intake and the air drawing through the intake manifold will help dry it out.

[@T3CN01]

Dude love the music a true car guy channel thanks for the great 👍 content

[@martinbuilt]

Glad you enjoy it!

[@bobwa399]

We dont have any particular cleaner...can I use Petrol , kerosene or Isopropyl Alcohol. We do have carborator cleaner in cans can that be used too?

[@Bangincheeks369]

Wow this is a great idea! I’m gonna do this. Thanks for the video!!

[@martinbuilt]

I'm glad you liked it and found it helpful thank you for watching.

[@1badcj8]

Freakin' Awesome! Thanks Martin.

[@LZDEN]

good work Martin...cleaned up very nicely.

[@donnyrwooten]

Hey Martin I don't know if you can get back with me or not but I got a question after you took the manifold off the car Underneath It On The Block I got a bunch of oil and water can it be cleaned out and read and fix

[@martinbuilt]

Yeah definitely clean all that up underneath the intake manifold area of the engine block. You need to determine Is where that oil and water is coming from.

[@donnyrwooten]

@@martinbuilt thank you my friend

[@superior3384]

Show us how you installed a water hose to your water heater. I can't find a KZbin video on that

[@Mopar_Sevastian]

Good video very transparent on the cleaning procedure

[@martinbuilt]

I'm glad you liked it and found it helpful. Thank you for watching.

[@jorgenegron5169]

My 2013 f150 v6 3.7 has a weird noise when I put on reverse and drive on neutral and parking no and thr mechanic noticed the noise came from the intake what to do? Thanks

[@WendysAnime]

Where did you get the filter on your crank case vent at 11:08 ?

[@martinbuilt]

amzn.to/3UcELNP

[@petersmith7140]

Is putting this carbon & purple power down the storm drain a good idea, the storm water just goes into ponds and is not treated

[@martinbuilt]

Purple power is biodegradable and I know for a fact that all the water that goes down our storm drains is treated.

[@petersmith7140]

@@martinbuilt wow great. our storm water is not treated.

[@PhantomMiles]

hey man. you should try with ultrasonic cleaner. in this case need the bigger one to fit entire thing. and some engine degreasser. the bad thing. can be expensive

[@martinbuilt]

I'll have to look into it an ultrasonic cleaner that large would probably be quite expensive. Perhaps I could even build one. Thank you for watching.

[@klowisrt]

Hey Martin, I also have some Power Purple. It is a good product. However, the instructions specifically say NOT TO USE ON ALUMINUM. Maybe the manifold you are cleaning in the video is not aluminum, but I did hear you mention that if you were to use Purple Power on an aluminum intake to be sure to rinse well to prevent the white stuff that builds up.

[@MartinJones1]

Wish I read your comment first :(

[@kevincraven2581]

ruined my fuel rail and oxidized the whole manifold

[@constructiontech1970]

Martin I started using Purple Power last year and it is a fantastic product!

[@jc8liter2388]

Good video, man! What did you use to shine up the plastic on the outside? My LS intake manifold is looking beat. Thank you.

[@martinbuilt]

Thank you, I used MEGUIAR'S Ultimate Black Plastic Restorer amzn.to/31hMFsD

[@Kolonol1]

I notice on your cutaway motor there you have what looks like Spectre filters over the crankcase breathers...is it possible to do that and just remove all of that plumbing in the back of the motor? Anytime I can remove annoying stuff like that plastic tubing, I do!!!!

[@martinbuilt]

you can on that on that side of the engine but you need to flow what I have done in this video kzbin.info/www/bejne/pZ7VYZ-cip1_fMU

[@r.blanco7520]

Nice video Martin. I have been thinking on doing this for a while. Have you run the manifold after the cleaning? Any issues if you have. Thanks.

[@martinbuilt]

This manifold will be going on the HO engine that I'm rebuilding. I have used this same method to clean the intake that I'm currently running on my 04 Jeep Grand Cherokee.

[@user-nf3ys9vg3k]

Hey @Martinbuilt thanks for this cool video. Sorry been busy so here in few days I’ll try to catch up on vids. I was wondering, my intake is OEM, however after tracing heads I notice that there is a very small overlap. What is your thoughts on “porting” the intake to match? Is this unheard of?

[@martinbuilt]

Port matching, I have done this before on the 4.0 Jeep engines.

[@user-nf3ys9vg3k]

@@martinbuilt thx Martin

[@DL101ca]

The smoother the transition, the better it is for flow, so more air will enter the engine giving more power.

[@isaalb33]

You think a catch can can help to avoid that carbon building? I don't let me if that is a good improvement.

[@martinbuilt]

Yes a catch can would greatly reduce the carbon buildup within the intake manifold and the intake runners of the cylinder heads. It is one of the mods I will be adding to the engine.

[@isaalb33]

@@martinbuilt I'll try it in my jeep liberty but its many types of catch can. I would like to install the right one that don't reduce at all the air going tru the valve cover I don't think is right either.

[@martinbuilt]

@@isaalb33 oil catch cans should not reduce the amount of air that pass through the engine. Here is the one I like and will be installing in my 04 JGC. www.radiumauto.com/Universal-Competition-Catch-Can-P289.aspx

[@mainsfortes5778]

Did you use the degreaser full strenght?

[@martinbuilt]

yes full strength.

[@elysianfields6350]

Oil catch can minimizes blow by. Next step is an equivalent for the egr contamination.

[@martinbuilt]

For sure, I also purchased one I have yet to install it. I got mine from Radium; their products look like a work of art and cost like it to.

[@elysianfields6350]

@@martinbuilt I put a stainless steel scrub pad inside to increase the precipitant surface.

[@sapphirespica1152]

I have code p2006 one of them stuck open will this clear the code? Engine light on need smog! :(

[@Fooney1]

Purple power is great for caked on geese too I have seen it used in restaurants.

[@martinbuilt]

yeah, this stuff works great. Also, try Totally Awesome, it is a little milder cleaner and is safe on aluminum.

[@Fooney1]

@@martinbuilt Yes also can confirm Totally Awesome lives up to its name. Guess if you can clean a geese trap you already know how to clean an engine haha.

[@kyore789]

Big thanks I figured I could hose it down but had to make sure

[@martinbuilt]

I'm glad you found it helpful. Thank you for watching.

[@calorcito4209]

Nice video! I need to clean an intake since it has metals from a valve!

[@martinbuilt]

Thank you, you may need to replace the intake, after cleaning it I would use a inspection scope to make sure you got all the metal removed.

[@adrianramos8291]

Could carbon build up cause electrical issues? Looking through my throttle body I definitely see build up could this be the reason my battery light comes on when I press the accelerator? Or even a power surge

[@martinbuilt]

No that wouldn't be the cause I would have your alternator and battery checked out really sounds like the alternator.

[@HeyUncleA]

Can we clean the intake without dumping all the stuff in the river?

[@martinbuilt]

Purple Power is Powerful cleaner & degreaser, Non-Abrasive, Biodegradable & Phosphate free. One of its uses is a driveway cleaner, they wouldn't least as one of its uses if it wasn't safe.

[@robbieheath5894]

Ok what were you cleaning out of the intake? Carbon and oil. Stop being a hack. The Epa would destroy a business if they saw them doing that.

[@cjgenxfitness7334]

My mechanic said I need to replace the plenum gasket on my 04 dodge dakota 3.7 yet I can find NO plenum gasket anywhere. note: to my understanding the plenum gasket should be rectangular can you give some advisement on this.

[@martinbuilt]

this is what he means amzn.to/33pxWxn

[@cjgenxfitness7334]

Copy that

[@s.b5412]

Thanks Martin learning from you a lot...

[@emiliomauleon3846]

Is that safe to enter the storm drain when you are housing it off ?

[@JB-zn1kx]

Dilution is the solution to pollution

[@87tunj]

I love it. Washes it all down the storm water..

[@donaldsilversmith248]

Thank's Martin iam going too do mine too an crank case breather system probably be the best time to thank's

[@martinbuilt]

Glad you found it helpful.

[@joshuajuarez4754]

thanks for the info I'm 13 but I still wanted to learn about this

[@martinbuilt]

Thanks for watching Joshua.

[@petermitchum9826]

Martin can you please tell me where you purchased your tube brush?

[@martinbuilt]

27-Inch Flexible Dryer Lint Brush amzn.to/31Hq74F

[@F.c1]

Does cleaning it actually make the engine run better?

[@martinbuilt]

If the buildup is very heavy yes you would notice a difference.

[@Ty-tie_FTW]

Didn't want to try the blow torch and compressed air method on that plastic manifold?

[@martinbuilt]

I think I'll stick with the Purple Power/brush method...lol

[@raygonsales1680]

Marvelous Martin! Awesome 💪💪👍👍

[@martinbuilt]

Thank you Ray I appreciate that I'm glad you liked it and found it helpful.😎👍

[@nickfatsis9607]

What about doing the same job on an aluminium inlet manifold? use the same product?

[@martinbuilt]

yes you can, just don't leave the intake soaking in the purple power over night and properly rinse the intake wit water. Another good and aluminum safe product is Totally Awesome.

[@nickfatsis9607]

@@martinbuilt thanks mate!

[@marionmccloud79]

If you don't have hot water available, will cool water harm the process or the intake manifold?

[@martinbuilt]

no, hot water just does a better job of cleaning

[@klowisrt]

Hey Martin, My apologies, I miss read the instructions, it says to test an out of sight area...especially aluminum. My bad, it looks as though it has been used on aluminum but to use it with caution and to test an out of sight area first. My apologies.

[@martinbuilt]

No problem, yeah it definitely will mess up aluminium especially if you good soak it for any period of time. It works great on these plastic intake manifold like I used in the video. Another great alternative is Totally Awesome that works well with aluminium.

[@newhorizons4253]

Can someone tell me please how to remove the oil pan on this engine? Near the front of tranny.. I need to replace bearings on 3.7... but have no equipment to raise engine.. so is it nessesary to move tranny? Or a way around it hopefully? 08 Durango

[@martinbuilt]

If you're planning on replacing the main bearings you're gonna need to pull the engine. The bed plate needs to be removed to change out the main bearings and this can only be done or would the best be done with the engine removed and understand.

[@newhorizons4253]

@@martinbuilt so I would not be able to complete the main bearing replacement just by pulling the transmission? I would have to entirely remove the engine and unmount the engine from the transmission and take the whole engine out?

[@newhorizons4253]

@@martinbuilt by the way thank you for all of your videos there most definitely excellent and I cannot see another way in which you could do your videos more properly and helpfully. By the way your videos help me to successfully complete the 3.7 timing system replacement. Already did my lifters and rocker arms and the timing system and now I'm wanting to shoot for the main bearings and that's about all I can think that I want to do to it for it to be reliable. I do not have the proper equipment to remove an engine but however I'm thinking about just buying an engine with a lot lower miles and completely rebuilding it and then paying probably about a grand to have it installed. But I know whose videos I'll be going to during the rebuilding process if you do not have a video on rebuilding this which I'm sure you do I will be looking back on your videos.

[@jagboy69]

Chooched that intake pretty good!

[@EuGostoVer]

@2:05 How the heck do leaves get past the air filter?!

[@martinbuilt]

This engine had been setting outside partially disassembled at the time that I purchased it.

[@jeffklonowski6816]

Rebuilding my 99 350. Lots of cleanup required

[@calebstewart9693]

Will cleaning improve power?

[@martinbuilt]

Yeah, anytime you can bring the runner diameter back to the original diameter and smooth out the intake runners, you gain power. Thank you for watching.

[@autotech265]

Hmm very similar to cleaning a dirty bong. A Helpful tip: Use salt or a light abrasive to help scrape off resin/carbon .

[@martinbuilt]

Thanks for sharing...Lol

[@MartinJones1]

Well hopefully others will read my comment first before making the same mistakes as me: 1. Do follow safety instructions. Purple Power will tear up your hands. 2. Do not soak parts long term in the stuff. I figured if it soaked white stuff would not appear. It will actually form under the surface of purple power. 3. Yea, don't use on aluminum. 4. Even after soaking it, I still have deposits inside my intake plenum.

[@yes.orjust-no]

What do you consider long term? What is your suggested soak time? 1-3 hrs or less?

[@MartinJones1]

@@yes.orjust-no I think I left it for a day or so (probably longer). I finally built my own parts washer and washed the deposits along with other crap using diesel fuel. (maybe not the best choice, but it was available). And when I put the pickup back together, praise God, it ran, and ran well. Now I need to do something about the leaky transmission and rotten cab ;)

[@sixnine79]

so my runners are stuck open giving me a code p1007. after cleaning it like this do you think the code will engine light will go off. the upper manifold is almost 900 dollars

[@martinbuilt]

Yeah I would think it would after you clear the code unless there is something mechanically wrong.

[@sixnine79]

@@martinbuilt ok thanks I've been having this problem with a dodge magnum. this will be my last try to get the code off and if not imma fold this car up and put it in the trash can.. thanks a bunch

[@N8DOGG520]

@@sixnine79 Did leaning it fix your problem? I have an 07 Magnum with P0660.

[@ashleyhernandez1420]

Where can I find this brush, to clean it ?

[@martinbuilt]

amzn.to/3Jq8GuI

[@JasonWalls-l1p]

What is the sensor on the front of the intake called

[@martinbuilt]

That is the map sensor.

[@JasonWalls-l1p]

@@martinbuilt thank you

[@kaiokenx1005]

Awesome thank you sir. Alot of help

[@RS-qp4bp]

I've used purple power for 10 years here and there mostly on my driveway. When I saw you using it with bare hands I cringed because that stuff will melt your skin. You normally dilute the PP with hot water to "activate" it. I'm no tree hugger but I would have contained two gallons of contaminated Purple power and disposed of it properly. Other than that, good video.

[@NDLAP66]

Purple Power! I use that on everything