How to clean and oil K&N motorcycle air cleaners, as well as Arlen Ness or Screaming Eagle filters!

I show you how to service your Harley Davidson air cleaner properly! You don't have to use the whole recharge kit! Don't forget to like, subscribe, and comment below! Thanks for watching and stay safe on the road!
#motorcycle #harleydavidson #bike

[@DanHeidecker]

Great video. Helpful and straight forward.

[@WrenchesCorner]

Glad it was useful! Thanks for the support!

[@blazzesome4269]

Just took my Lowrider S to get the 5000 mile service ‘bike came back with the oil filter looking the same so I’m here thanks for the upload.

[@WrenchesCorner]

Glad it helped! Thanks for watching!

[@jiminthelakeify]

That was great! Thank you for posting!

[@WrenchesCorner]

You're welcome! Thank you for watching!

[@jacobbryant9257]

Awesome thanks for the help man

[@WrenchesCorner]

No problem! Thanks for watching!

[@SavageAlaskan1]

Great video thank you

[@WrenchesCorner]

Glad it was helpful! Thanks for watching!

[@snowlothar45]

3:19 My Harley Screamin Eagle is defiantly oiled.

[@WrenchesCorner]

Right, I should have said the stock Harley air filter doesn't get oiled. Thanks for watching!

[@yihan206]

I have a question for you, I have a M8 2017 and they run not as lean as a twin cam. There is about a 10% leeway on the M8. My question is if I put slip-ons with a high flow Air filter do I really need a tune? Remember I'm still using my M8 cover so the air flow would be a little less then say an full open Air filter. Thank you and nice videos

[@WrenchesCorner]

I have installed pipes and air filters on m8 before and sometimes the bike handles it just fine. You can install them and see. A good test would be to take it on a test ride and listen for deceleration backfires. roll off the throttle and don't pull the clutch in. As the engine is winding down it shouldn't backfire. The more it backfires on decel, the leaner it is. A couple little quiet pops is ok, but backfiring is not good and you will need to tune it until the backfire goes away. Good luck with your project!

[@user-oq2xs8tv7x]

❤❤❤❤❤❤❤

[@WrenchesCorner]

Thanks for watching!

[@Scooter3194]

Sweet thank you I ordered a used one on eBay it’s pretty dirty

[@WrenchesCorner]

Glad I could help! Thanks for watching!

[@MrWhitelightning73]

How about a leaf blower for quick drying

[@WrenchesCorner]

You should let it air dry. You can blow fiberglass out of it. Just plan on doing it when you can allow it to dry naturally. Thanks for watching!

[@ajflores84]

For the stainless steel version, is it safe to use the k&n filter oil in red?

[@WrenchesCorner]

That's not a problem. Thanks for watching!

[@Stevers01]

Should it be oiled if its a Vance and Hines filter?

[@WrenchesCorner]

Yes, they need to be oiled after cleaning and drying out. Thanks for watching!

[@christopher2399]

I believe Harley screaming eagle air filters ARE made my K&N... And ARE Supposed to be oiled.

[@WrenchesCorner]

Right, Only the air filters that look like cotton shouldn't be oiled. Thanks for watching!

[@curtbradley549]

Are ?? the grey arlen ness suppose to be oiled ????

[@WrenchesCorner]

The Arlen ness filters are supposed to be oiled as well. Thanks for watching!

[@steverick3060]

Not synthetic air filter no oiling

[@user-od7zz5uu3d]

I should've watched the video first...I accidentally saturated mine...🤦‍♂️

[@WrenchesCorner]

I hope you found it helpful and thanks for watching!

[@booxilla.1968]

So did I. Now I feel the need to reclean it. So much oil wasted.....😫