Upgrade Your Harley Air Cleaner for less than $100!

[@CAGraphics576]

I got this for my 21 Road Glide Special. I'm very happy with it. The Arlen Ness has many more pleats, more air cleaner material. Not only is it 20% taller, but I believe the cloth media makes it easier for fresh air to enter. The engine will breathe better and looks very nice.

[@JOSHUARICCELLI]

do you have to get it re tuned or can you just run this

[@CAGraphics576]

No, not necessary. From what I have read the onboard computer can handle up to a 10% change. I didn't notice any change, nor did I expect to notice any additional power. But, if you change your slip-on mufflers, you may need to remap to maximize the change. I added the air cleaner mainly for looks.

[@robertmoore1393]

​@@CAGraphics576ii

[@bobswanson3546]

I have one of these on a sport glide, works pretty good just installed a fuel Moto BMF on my street Bob

[@DirtyCityMick]

Does this filter need to be oiled?

[@alanwagers7073]

I would like to thank you for your hard research and opinion on things. I'm a newbie Harley owner of a 2016 freewheeler w/6000 miles , will this fit the trike?

[@tomellis7949]

The oval air cleaner that comes on 21 and newer RG and SG Specials is the Ventilator Air Cleaner that has a washable with soap and water filter element. Do not oil this. The SE Ventilator comes with a K&N filter.

[@tf2529]

Thanks for the info

[@kennethcalimpong7919]

Hi Iron Anchor Cycles, liked & subscribed, great option, look forward to more of your content. When time permits could you tell me if I would need to get a tune after installing this Arlen Ness ? Thank you & take care, Kenneth

[@MrCRM2011]

Appreciate the information 🎉I just order the air filter for my ‘21 RGS. Thanks guys

[@transporter1387]

Thicker filter, do you need longer bolts to mount it? Are they supplied? Thanks. Edit just read the description and it comes with spacers 🙂

[@toolmaker5150]

The spacers are plastic 😮 Since the bolts are captured by a cover on the air cleaner, I would prefer aluminum spacers. Thoughts?

[@jimbo4260]

​@@toolmaker5150I agree.....

[@RanGer-498]

Reminds me of the old Blitz import car air cleaner.

[@keablerman]

Read that the stock rain sock will not fit with this install, true? If so, where might one get the correct size rain sock?

[@irishdixie77]

Buy some panty hose

[@thristann]

my friend, does this air filter element perfectly replace the original or does it need adaptation? Is it washable?

[@okcrlrdho6397]

Just found you guys ordered marker turn signal so cool!

[@Kingdlack]

Great informational video💯

[@Americanland]

If you just put a big sucker air filter on do you need to put a tuner on if everything else is stock?

[@denalidriven1574]

Ordered!!!!!!!

[@tf2529]

With a 2021 HD Street Glide Special, is it already basically a “stage 1” air intake? Just replace the filter eith a better one?

[@stompdancer62]

Yep

[@wb4514]

I have a 2017 HD Freewheeler with the M8/107. My Ness Big Sucker kit says to unplug and tie off the electrical connector at the base of the throttle body. Is this critical for my install ? I can't even see how it disconnects !

[@markgarcia8552]

Do you have to tune the bike when putting on that air filter?

[@FriedPi-mc5yt]

Not always if your bike is fuel injected. The computer has some variability to tune the bike for a Stage 1 upgrade. If you do more than just adding slip on mufflers and a better intake. Then you’ll will need to get it tuned. I’m running a stock Road King but I went ahead and bought a V&H FP3 to go on it. It was about $400 but it’s a nice upgrade even for stock bikes. Mostly because with every upgrade, you can flash a map to the ECM with no visit to a bike shop. I flashed a V&H map for a stock 2018 Road King and it really pepped the bike up. I turned off the 109 mph speed limiter Harley restricts the bike to and turned up the sensitivity on my throttle response. I’m getting ready to put pipes and an intake on the bike. So the tuner will be there to tune up the bike when those are done. The good thing is that V&H are constantly updating the maps for the tuner. The best part is that connects by Bluetooth to my phone. I just turn the bike on, go to my V&H app on my phone and tune the bike. It’s actually pretty great. V&H even have maps for common cams. You just input all the info for your bike and flash the ECM with the new map. It even has a learning feature that will learn the best tuning for the bike and make adjustments as you ride it. I’m not a being paid by V&H for this endorsement.😂 Just look into the Vance and Hines Fuelpak 3 and see what it can do.

[@teacherofmany10]

Does it need a tune after install?

[@M_J_Glide_22]

Can this be used in a high flow capacity with a stage 2 cam kit

[@BillTheHarleyGuy]

i have a 1988 sportster with a factory air breather and i ride in rain all the time,would that filter fit in the original air breather?great video 👍

[@joeltrace1362]

No, this would be for 18+ M8 motors.

[@BillTheHarleyGuy]

@@joeltrace1362 thanks just wanted o make sure

[@jimbo4260]

The diameter of the throttle body is a fixed size. And it sucks a ton of air but it too is limited because of its size. What's the dyno spec of a bike with a stock filter and this filter? Sounds like a lot of lip service with no proof of any true benefit.

[@GregKessey]

7:57 min for a 1 minute video.

[@IronAnchorCycles]

Gotcha.

[@jbicknell1000]

Need a tune after installing this filter?

[@CAGraphics576]

No, you shouldn't. Not unless you swap out the slip-on exhaust. The onboard computer and sensors will handle the little bit of increased air flow this filter provides.

[@markmcintosh7095]

My dealer said with pipes and air filter yes.

[@branded72.]

you wouldn't need a tune then either @@CAGraphics576

[@jmaxx73]

If you don't like the black top lip on the front cover, you can take it off and flip it upside down. Cleaner look.

[@andrewmccullen4429]

How would you compare this to a k&n?

[@CAGraphics576]

I would say its a K&N knockoff, though a very good one.