You need a video showing how you made that “air blower”. Nice work.
@RMarinka4 жыл бұрын
There is a video now kzbin.info/www/bejne/nmKymXVod6iMftE
@lessmigrantsmorewalls8392 Жыл бұрын
2:30 you are genius sir
@paryjameel8682 жыл бұрын
Your videos are so helpful thank you from heart
@EliasDaoud4 жыл бұрын
cotton Q-Tip leave lot of small particles of cottons. I tried it before, many times. Where I can find the Ether ? Pharmacy
@Mr.wither_storm4 ай бұрын
Yes! They look almost like flattened little worms. Use the blower after cleaning. Don’t re use the q tip. I wipe then turn it to the other side for the next wipe or if you’re using the tip, throw out after one wipe.
@nachiket30sep4 жыл бұрын
Thanks for the very informative video. Could you give some advice for cleaning polarization filter and the analyzer?
@Mr.wither_storm4 ай бұрын
Someone spilled a bunch of spice somehow on top of my microscope. It got inside the middle where the eye pieces look in. What a mess. Smh I came to see how to remove the round screw pieces that hold in the glass pieces from the optics. There’s two indented marks so I’m guessing there’s an actual tool for these?
@johnsonjohnson29794 жыл бұрын
In the USA, at least in California, we can not buy ethanol over the counter except as vodka (40%etoh). So our rubbing alcohol is not ethanol with dye added in the US. What we have access to is isopropyl alcohol sold in various dilutions (diluted in dH2O). Iso alc comes in 50%, 70%, and 91% dilutions. Sometimes it contains a dye, but very rarely. Isopropyl alcohol at any dilution is known as rubbing alcohol (in the US) wether it contains dye or not. Is isopropyl at any of those dilutions, but with out dye okay to use in place of ethanol?
@PredatorGaming-20074 жыл бұрын
Please make a video about cleaning 100x after using oil immersion
@tomstur1199 ай бұрын
I want that pump air blower! can't seem to find this on Amazon
@handle8handle2handle22 жыл бұрын
im having problems with my 40x objective, because im finding that i have to move it really close to the actuall slide and cover slip with the sample, it has lots of dirt, potential scratches and recently gott water in it because the cover slip broke from the objective being so close, is there any way to get detailed focus on a 40x objective without going to close to the slide or cover slip?
@sanskritiscreations9373 Жыл бұрын
Ideally you should focus the slide FIRST at 10x and then just move ONLY the objective to 40x or higher (whichever you need) without changing the plane of focus. That's coz the objective lenses are aligned in a way that focus plane for all remains the same so the user has to only focus at one and it will remain focused on all objectives. But if you find that after focusing at 10x and shifting it to 40x, the focusing changes, and you have to use the adjustment knobs to refocus at 40x, then it is possible that you may need to get your stage/lenses realigned (ask the company for service/repair, they'll know). One must never attempt to focus at 40x or 100x objectives coz the distance between the slide and the lens is so small that we run the risk of touching the lens to the slide and the lens can get scratched and you may also end up with a broken slide and cover slip. Hope this helps!
@whiteac3174Ай бұрын
@@sanskritiscreations9373Thank you!
@dumitruvalentincrihan25278 ай бұрын
Hi, Isopropil alcohol is safe to use?
@Remascard5 жыл бұрын
Can you do a video on applying oil on top of a brightfield condenser so you have total oil immersion? (Condenser - oil - slide - oil - objective) Thanks.
@faustsmith2 жыл бұрын
Could you post a video cleaning flux fumes off both zoom objectives of the szm series of microscopes used in the electronics repair industry please?
@PlayJewel4 жыл бұрын
How did u made that amazing air blower?
@MicrobehunterMicroscopy4 жыл бұрын
Here are two videos where I show you how to make it: kzbin.info/www/bejne/nmKymXVod6iMftE kzbin.info/www/bejne/h3-2koGveq2Wqbs
@worldofmicroscopy68964 жыл бұрын
I like your videos. ✌👍
@usernamemykel3 жыл бұрын
Others say not to use cotton sabs, but to use only polyester swabs - your thoughts?
@gettingpast43913 жыл бұрын
nice work
@notatrampolineАй бұрын
How the hell do i clean the whole eyepiece its so covered in dust my digital eyepiece lens is too. Just all of it the whole thing
@kjellgolsen85214 жыл бұрын
You mention 70% etanol and 30 % of ? (Ither?) can you spell it for me and do you have the chemical formular ?
@neilbarroga11283 жыл бұрын
Ether
@heisenberg69219 ай бұрын
I will say the "danger" of using this or that solvent dependes on the brand of your microscope, Olympus, Leica or Zeiss, for example do not use the same "glue" to fix lens on their objectives
@biggibbs46782 жыл бұрын
When you finish you can drink the ether as a celebration
@woodyboot9355 Жыл бұрын
everclear?
@neilbarroga11283 жыл бұрын
It is possible tonuse xylene to clean the objectives of microscope.
@MicrobehunterMicroscopy3 жыл бұрын
Be careful with solvents like these. xylene might be able to dissolve the lens glue that is/was sometimes used to hold the lenses in place. Generally alcohol is recommended. Xylene is also not healthy to be inhaled, so I would use alcohol (consult the manual, if it mentions this)
@razterizer11 ай бұрын
It sounds like he said "micro-punting". :)
@miguelelento56375 жыл бұрын
what is ether?
@MicrobehunterMicroscopy5 жыл бұрын
It is diethyl ether, an organic solvent: en.wikipedia.org/wiki/Diethyl_ether
@PPMOCRG3 жыл бұрын
Ether is extremely flammable, so be very careful.
@donna51082 жыл бұрын
ay sos ah puro daldal
@leoponce82ponce5 жыл бұрын
First comment!
@leoponce82ponce5 жыл бұрын
Love your videos btw. Keep posting please.
@MicrobehunterMicroscopy5 жыл бұрын
Thank you. Please also have a look at my other microscopy channel, if you have not already: kzbin.info