Certified armorer, NRA Distinguished Police Expert, and veteran instructor for over 40 years, teaches the proper way to clean a handgun, without gimmicks, expensive cleaners and lubricants, or fads.
Пікірлер: 595
@Mike-ji8ez7 жыл бұрын
This gentleman is not only very smart, but such a classy person as well. America needs more men like GunBlue490.
@jjiacobucci4 жыл бұрын
So true. He is a gem !
@BamaChad-W4CHD3 жыл бұрын
I concur! Listen to the man that has been doing it longer than most youtubers have been alive.
@rifleshooterchannel2082 жыл бұрын
NRA Fudds like him are the reason we get gun bans enacted.
@deepb2492 жыл бұрын
With long long long videos that make you asleep
@nallie10 Жыл бұрын
I operated my 1911's under the premise, the more oil, the better!! At the end of shooting sessions my guns were a muddy mess. Then I started watching your channel. After cleaning, I only applied a light coat of LSA to critical areas and wiped it off. Now at the end of a day of shooting, my guns look like they were just cleaned! Thank you sir for that important lesson.
@josefredshirt23897 жыл бұрын
Military police , Civilian police, Police sniper, professional armorer...I would hazard to guess that mr. blue knows what he is talking about. If one wishes to disagree with him, go ahead , I don't think he is particularly interested! I just found this channel and it is the sanest firearms channel on KZbin. Thank you very much for helping me, and I am sure many many other people, by sharing your knowledge for free. That's a very nice thing to do and a very fine gift for me.
@douglaspollard45854 жыл бұрын
Sir please tell us what you think about the practice of moly( molybdenum) coatings on bullets
@aainspection8 жыл бұрын
"[These guns] are not made of cupcakes." Classic line. Seriously helpful and informative videos. Thank You.
@chaimafaghet7343 Жыл бұрын
If they're not made of cupcakes there must be some other thing compelling me to put one in my mouth.
@JxCxReichard9 ай бұрын
@@chaimafaghet7343You ok, man?
@brentvinson91987 жыл бұрын
The voice of experience. Listen to him.
@mnrodriguez2 ай бұрын
Ok! But properly lubricate your guns.
@petermanetta29209 жыл бұрын
We need folks with the experience to back up their advice like you to continue setting the record straight when it comes to firearm maintenance. Other than Hicock 45, you are the only one advising against oiling a handgun. I believe you guys are correct and have followed this very important advice. Thank you and keep making these very important and informative videos.
@gunsguitarsandgambling36147 жыл бұрын
I love the old school American guys...little or no profanity.
@BamaChad-W4CHD3 жыл бұрын
You can hear him cuss just a little in a couple of videos but it's classy and making a major point.
@Colt-ii4qn3 жыл бұрын
Guys got class 👍👍👍
@blogobre9 жыл бұрын
Thanks, as a new gun user, your years of wisdom are already serving both a better understanding of firearms and better care.
@luispadua84919 жыл бұрын
GunBlue490 I would like to thank you for this video. It is very informative, I used to use oil and grease in my guns, and would malfunction at lest every one hundred rounds. Now all I do is clean the parts, dry them and put one drop of oil on the whole gun, and then dry it, The guns work flawlessly now, and require almost no cleaning after shooting. Most of the fouling is in the barrel and that is it. No more discoloration on my revolver, no more malfunctions. I used to slather my guns and oil and would find rust popping up here and there, and would think " Needs more oil", well sense I have been using only a drop of oil, no rust or patina, or discoloration on my guns. Thank you, you have done quite a service by posting this.
@ctxflyer9 жыл бұрын
This man has forgotten more than the so called experts! SUPERB !!!
@FROGDADDY797 жыл бұрын
Thank you for investing your time and knowledge in proper cleaning of weapons, you helped me understand WHY I do not need to oil my guns. I was that 2 drop guy but not anymore after listening to you explain the reasons for not oiling. I actually laughed when you said "some of you look for places to put a drop of oil and that will gum up your gun." God bless you!
@charleswebb57976 жыл бұрын
Great information - very revealing insight. I have for 58 years cleaned my firearms without using any oil. Always use Hoppe's products. Have never had a single problem.
@jeanducheamps76977 жыл бұрын
Now this is what I have been looking for! Clear and simple instructions from an expert. I'm a fan for life. Thanks for the great vid!
@klkakj446 жыл бұрын
I have NEVER seen a more useful instructional video than this one. So much I DIDN'T know. Thank you so much!
@My-You-TubeAAA5 жыл бұрын
Sir, I must say you really made me rethink a lot of stuff that I've learned. It's an honour listening to your videos. You really simplify things. Thanks a lot.
@richardsimons40596 жыл бұрын
This why I like watching KZbin when someone with tons of experience is willing to share their expertise to me that had no idea how to clean a gun and was doing it wrong. Thank you sir. Much appreciated. Now I am going to clean all the oil from my guns.
@atomicdog717 жыл бұрын
This has completely changed my routine for cleaning my firearms. Excellent instructions.
@Colt-ii4qn6 жыл бұрын
Knowledgeable man sharing his many years of experience, much respect to you Sir 👌
@mclifford66557 жыл бұрын
Great videos. I have been shooting for years and wish that I had this knowledge back when. Mr. Richards really knows what he is talking about.
@johndoe52293 жыл бұрын
50 years from a certified armorer point of view, yes please, no tactical nonsense, yes please, a cartridge is to a gun like flour is to bread! this man is a genuine genius, plus he has an American behavior that is raw nowadays!❤️🤘
@tmgforsakenx57728 жыл бұрын
thank you for taking time to share your knowledge and experience with us. I really enjoy your videos it reminds me of the time I use to spend with my late grandfather.
@SuperSportsman019 жыл бұрын
Another great instructional video. Much of what we see out there about how to clean is based on particular products, and really comes down to selling a product. Tried and true methods that stand the test of time is where it's at. Thanks for the work you are doing.
@thefarmfaa9 жыл бұрын
Very nice! Straightforward and effective. No need to chase the latest 'thing'. Thank you
@buddymorrissey8 жыл бұрын
Sir, finding your channel was a Godsend. I've seen so many videos and blogs promoting this potion or that technique, it was mind-boggling. Experience and superior knowledge like yours will always cut through the B.S. When I heard your advice on minimal lube, I knew you were the real deal. My father in law has repaired mechanical watches as a hobby for many years, and the most important rule he taught me is clean components and just enough watch oil to wet the end of a hair. He has the same little bottle of oil he bought many years ago. Also, anybody that's ever worked their car knows that oil and grease slopped all around make for a dirty grimy mess. I'd guess a lot of gun owners are like 16 year old boys with their first car- they might have a vague idea of how it all works, and because they dearly love that car, they're hoping that the magic potion in the brightly colored bottle with the great ads and the testimonials from "everybody" will really make their car faster. They want to do SOMETHING, so they put on those stickers, the colored spark plug wires. That 16 year old boy grows up, but he still wants to do magic to his "toy." Regarding the solvent in the clear squeeze bottle- I'm sorry but I'm not clear- is that Hoppe's solvent? Hearing you talk about a no-oil philosophy for shooting in cold climates, I thought you might get a kick out of the video with the Beretta 92 lubed with Italian Gun Grease, ziplock bagged and frozen in a block of ice. kzbin.info/www/bejne/Z6SZdKlpfq5-mLs. They make amazing claims, but I wouldn't think a water based product would be the ideal protectant for metal...
@majorpayne52898 жыл бұрын
I absolutely love what this fine gentleman is saying! Awesome instruction!
@GunBlue4908 жыл бұрын
+Major Payne Thank you for your kind words. May God bless you.
@garys55406 жыл бұрын
Yea!! He politely makes you feel stupid!! LOL
@BamaChad-W4CHD3 жыл бұрын
You never disappoint! You are the voice of experience and common sense this platform needs more of. Hoppes is a fine product. Very well priced. They have been in business for many, many decades for a reason. They make good products at good prices. Also you can get a pack of three brushes from dollar tree. A dollar for one steel brush, one copper brush and one nylon brush. Great deal for extra brushes to throw in your bag or truck. Great video as always. As I said. You sir, never disappoint. The only thing I do really differently is, I keep an oil soaked rag around and I wipe my guns down frequently. It just gets rid of my grubby greasy fingerprints.
@MrFuzzy19536 жыл бұрын
Very well presented and invaluable information for a first time 9 mm handgun owner like myself... Simple breakdown like you're showing, is easy enough, but I'll definitely go to the gunsmith for any really detailed breakdown for cleaning.
@willyb9339 жыл бұрын
Your expertise is much appreciated. It just makes total sense not to oil up a surface that is going to be subjected to the carbon and grime etc.of a firearm and create an abrasive 'sludge' that will counteract all you are trying to accomplish! As you stated these hardened steels will outlast generations of use ….if just kept clean and dry. Refreshing and sage advice from a professional! Thank you for your time and efforts.
@nickydumas94555 жыл бұрын
America has good men like our dear Gunblue, they are out there now opening their shops, day in day out. Reliable, forthright, accountable and willing to share/teach all they’ve learned from a lifetime of experience. Or simply for hire at a fair honest rate. God bless them “Not made from cupcakes” choked my coffee thru my nose! Thought i was gonna die. Ha! Love this guy
@phil4986 Жыл бұрын
Thank you for this video. I was one of those oil drenching fools but no more. I did exactly what you said not to do about all the seams near the trigger and hammer so I have to clean all that oil out and not add anymore to it. The tip on the oily mag lips I had never heard about and may explain a few guns I messed up over the years. Dammit, to myself. Clean it well with Hoppes #9.... wipe it lightly with a silicone rag or mineral oil on a rag. No oil on or near any wood. Practically no oil. I am actually changing the springs on a new Ruger Wrangler 22 single action so your spring tip helped too. Thanks again. 7 years later , this man and his video are still helping people. Pretty awesome. Stop slopping oil everywhere, it attracts grit ....makes perfect sense.
@frankz49007 жыл бұрын
You're the best sir. Pleasure to watch your videos
@tennisguyky7 жыл бұрын
Tip my hat to you sir! Teaching me so much and keeping it simple, much respect!
@eduardorgm73498 жыл бұрын
I am impressed, I was fully mistaken then... I really appreciate your teaching and your time
@markmorrison47308 жыл бұрын
God bless you sir! Great information and great to pass on to my kids as they learn about taking care of firearms.
@RobWhittlestone9 жыл бұрын
Hey GunBlue490, nice to see you're back - and with a major leap in video quality! Congratulations! It's looking good! I really like your "no BS" approach, your encyclopaedic knowledge and knowledge of accurate shooting. Keep 'em comingf! All the best, Rob
@nathanlambshead47784 жыл бұрын
Wish I had met you 40 years ago. Now I think I have to take all of my magazines apart and make sure they are not oiled up, although I have not experienced issues. I do not shoot very much anymore but I do want them all in good working order . I just bought a used 10/22 that I took apart and cleaned using your video. Thank you.
@HypocriticYT5 жыл бұрын
don't want any oil in magazines, if the oil gets into the primers they can misfire.
@jimo6802 жыл бұрын
Great vid and presentation. I only recently got back into shooting pistols, and was surprised by the lubrication fads that seem prevalent. Thanks for doing this...very helpful. I have already passed this on to my niece and nephew. God Bless!
@Res47229 жыл бұрын
Answered many of my questions and concerns about what I have been experiencing on my weapons. I'm not a young man but I have just recently had time to get out all the weapons I have collected over fifty or more years, many were still dirty. No excuses, just lack of knowledge and time. Have recently started collecting hand guns and was needing guidance in taking care of them. The 22s are so dirty after firing and with oil like the owners manual suggested it is a gummy mess. Thank you RS
@anthonyshoto17249 жыл бұрын
Very impressive explanation ~ in fact, your series of uploads are first class. Thank you. From London, England.
@GunBlue4909 жыл бұрын
Anthony Shoto1 I'm very pleased by your comments. Not everyone agrees with you. Thank you, Anthony.
@edgybob14 жыл бұрын
Thanks for all the years of experience information you are sharing with us. I try and share it with the gun forum I frequent.
@GUNSHIPFLEX7 жыл бұрын
Love your videos. You and Hickok are the best on KZbin. Two different types of videos but both very informative..
@fightjustice56024 жыл бұрын
It’s a pleasure listening to you sir. I find myself relaxing as though someone is telling me a pleasant story!
@shebear47153 жыл бұрын
Fight Justice so true. He is a calming influence, especially today.
@patrickstortz39498 жыл бұрын
Best gun cleaning video I have watched, Thank you Sir!!
@GunBlue4908 жыл бұрын
Thank you.
@peterpherfinion66719 жыл бұрын
Outstanding video and solid information. Thank you for your service Sir.
@gogomas8 жыл бұрын
I absolutely agree. No magic or mystery involved in cleaning. I remember from my army days, no need to use any expensive stuff. We always used to clean the mags too as a matter of fact.
@teefrankenstein43406 жыл бұрын
Thank you for your videos, very informative and helpful.
@garyK.45ACP Жыл бұрын
Great video. 👍 I'm -old- experienced like you. I use about exactly the same tools and solvents. I agree with using cleaning jags over loop tips for bore or chamber cleaning. No need to drag a dirty patch BACK through the bore. Push it out and let it fall off. Loop tips are good for cleaning things like magazines. I usually just remove the wood grips and set them aside during cleaning (for guns with wood grips) Too much oil on anything is just a dirt/grit/sand magnet. Brushes...bronze brushes absolutely! Make sure they have a BRASS core (not steel) and a looped tip, NOT a cut tip. They will cost a few cents more. They are worth it. Don't use rifle brushes to clean revolvers. They can be too long to completely enter the cylinder "window" and you won't be able to reverse them and pull them back out! Use a shorter "pistol" brush. I've also been using silicone wiping clothes for decades! They work great!
@boblack65576 жыл бұрын
Just discovered your videos. Thanks for the time you put in to making these .I have learned so much
@GunBlue4906 жыл бұрын
Bo Black Thanks, and don't forget to subscribe! I'll have more coming soon.
@paulmicrons84168 жыл бұрын
I'm one more person who needs to thank you. I was never taught or shown how to clean a firearm . I could guess but never sure , so Thank you for passing you're knowledge .
@GunBlue4908 жыл бұрын
+Paul Microns Glad to be of assistance!
@TheGoodLife629 жыл бұрын
Thanks GB. I just found your channel and have been enjoying your videos. Thanks for taking the time to share a lifetime of valuable experience with others, I've always been overly concerned that I might not be oiling my guns properly, especially some of my older surplus rifles that I'd like to pass down to my son. Your videos have helped me to relax a bit. Thanks again!
@CharlieGoy4 жыл бұрын
I've been struggling lately with the question of oiling my guns. What type? How often? How much? And everybody has something different to say. Once I heard this rationale for no oil being necessary, it all made sense. What a relief! Thank you very kindly.
@romodig8 жыл бұрын
Excellent tutorial! Thanks much!
@smilingbiter8 жыл бұрын
I just bought a Ruger SR .45 1911 like yours. I took it out and shot it as soon as I could right out of the box. I felt guilty because I didn't take it apart and make sure it was oiled. After listening to you, I'm going to follow your advice. By the way, before I bought my Rug was considering a Tauris loaded stainless and they had a video showing how to clean it. They didn't use any oil, just cleaned it and put it back together. I didn't buy a Tauris because I prefer a series 70. Your presentations are excellent, thank you.
@russelder97438 жыл бұрын
I picked up a Ruger SR1911-----------so far I really like it. I m watching your videos on cleaning it as the last time I cleaned a 1911 was Navy boot camp in 1975. Thanks for the time and effort you put in
@GunBlue4908 жыл бұрын
It is a very good gun, which I believe has a number of notable advantages over the US model 1911 we carried back then. It features stainless, has an integral safety/slide stop spring tube, features a beveled magazine well, extended anti-bite grip safety spur, fabulous front and rear combat sights, close fitted barrel bushing, and more modern, tougher steel. With run of the mill loads, mine groups into the black with all shots on a 25 yard NRA slow fire target. With my own +P service load, using premium 230 grain jacketed bullets, it groups all shots into the X-ring of that target. I've never fired a 45 with greater accuracy, at any price. The slide has great "slide wiggle" which assures that it will never seize, as often occurs with tight fitting slides. JMB purposely designed that slide wiggle into his design, which has nothing to do with accuracy, but everything to do with dependability. As long as the barrel is fitted snugly within the slide, and the sights are solidly attached, it makes no difference if the slide is loose on the grip, as it always repositions itself exactly the same from shot to shot anyway. All that for a bargain price over other 1911s. Good luck with it!
@russelder97438 жыл бұрын
+GunBlue490 Thanks a lot for all your info----you have a great deal of know how and are an excellent teacher. Im going to go over your videos a few times as every time I watch I learn a little more. Wish I could sit down and talk and pick your brain on things thanks much and thanks for your service
@dominicpetruzzelli31346 жыл бұрын
There is no substitute for experience.....a lesson well learned from this guy
@zackeaton9871 Жыл бұрын
Insightful and educating, thank you sir. Hope you make many more.
@Tinstar27 жыл бұрын
Thank you for your service.
@PlatypusAurelius4 жыл бұрын
"There's no need to oil the spring. The spring is going to spring itself, regardless." LOL. I love this guy. Excellent advice.
@josemonte4955 жыл бұрын
Great instruction and informative. Thanks
@MPGunther16 жыл бұрын
Thank you, Priceless information
@padraic45946 жыл бұрын
Fort Polk Bravo Infantry AIT. Another excellent video. You are so right. I learned the har
@christophergrogan46443 жыл бұрын
Well after the the social media purge I been binge watching these video at work. I wish I could of found more of these videos years ago
@JamesJamersonIsAGod3 жыл бұрын
Same! I really have no idea how this man has never come up in my feed before, but better late then never I guess.
@pjb94253 жыл бұрын
Good thing I stumbled upon this video, thank you for posting it.
@operator10186 жыл бұрын
I asked my prior question to soon. You’ve answered it. Again, thank you.
@THATMOFODIRT6 жыл бұрын
Outstanding video. Going to try the no oil method on my 1911.
@uralbob16 жыл бұрын
Love your videos, Gunblue490! Been cleaning and lubing all my guns since 1966 with no drama! Love the smell of Hoppes though! The smell reminds me of my childhood in the early 60's when I would clean and lube my single shot H&R .22 and my Stevens break open 20 ga. shotgun! I agree with your opinion on cleaning vs. lubing. You do one or the other, not both at the same time with the same product. Solvent is solvent. Lubricant is lubricant. Use some LSA if you want to lube your guns. I have some old LSA, but mostly, I just use regular mineral oil from a bottle that I bought back about 2005.
@011001010111001001114 жыл бұрын
Thank you for that short segment on magazine disassembly. I had a magazine that was gumming up and wasn't delivering the final round. I didn't know how to disassemble it, so I was just holding the follower down with a screwdriver and using a Q-tip with Hoppe's to clean around inside, hoping it would also clean the follower. Actual disassembly should be much easier and more effective.
@legato47668 жыл бұрын
"Guns don't have to feel slick, they only have to fire." You are the first and only person I've heard say this, and it makes a lot of sense. I am a new proud owner of a beretta, and I found this video to be very helpful. Thank you!
@tonyt.15963 жыл бұрын
Always great advice. Wish I had found your sight before I bought my guns.
@ypres19179 жыл бұрын
Thanks for a great video. Finally someone talking sense about the lubrication of handguns. I see videos out there for the Sig 226 and those guys are literally slathering the rails with grease - it's squeezing out all over the place when they rack the slide. I see guys at my club with heavily oiled guns - you can't touch them without getting oil all over your hands. I confess I do run a patch lightly coated with Breakfree CLP over the barrel and over the rails of my pistols, but it's just a very light film that is left.
@GunBlue4909 жыл бұрын
Ross Henderson Your lubrication method is 100% perfect and requires no confession.
@thormusique8 жыл бұрын
Thanks so much for demystifying this whole topic! We've all heard so many (often conflicting) cockamamie theories about lubing guns. It's wonderful to have someone with your experience and knowledge put this issue to rest once and for all! Now, I assume this same common-sense approach would apply to long guns as well, right? Thanks again!
@padriac45289 жыл бұрын
Thank you GunBlue490 for taking the time to create this (and your other excellent videos) to share you knowledge of firearms with others. Very good tips on how to maintain your firearms. Also liked your video on How to Oil and Lubricate Your Gun (and how NOT to). God Bless!!
@yankmania8 жыл бұрын
Top man. Thanks for the information.
@mosesbrowning80559 жыл бұрын
i usually take a q-tip and drop oil on the tip and use that to oil everything, like a mini silicone cloth. i am with you i love using silicone cloths, i dont use them for my stainless guns but use them for all my blued guns and rifles to protect them especially where the barrel is in contact with the wood stock. definitely like your video and you look like a Ruger man like me, i carried my sr1911 for 2 years until i got my sr9 last week, much lighter lol
@frankangelico84646 жыл бұрын
Thank you for your high quality videos and sharing your knowledge. You are a patriot. Do you plan on making any videos on misfires & how to avoid them - especially the very dangerous squib load ?
@knifenut67726 жыл бұрын
"Not made of cupcakes". I love it. Great video. Thank you for your service sir.
@DocRock833 жыл бұрын
No disrespect intended but guns need a light coat of oil on areas of friction. It’s as simple as this: I recently took a glock to range and after about 50rds of so it jammed. I took it apart and applied a light coat of oil put it back together and fired 100 Rd’s or so without jamming. The whole reason I “carry” a gun is to defend mine and my family’s life. I need to be sure my gun will function correctly when I need to use it. If you don’t think your gun needs lubrications fine but my guns needs lubrication to assure smooth action, prevent rust and protect it while extending gun life by preventing wear which I feel lubrication does. Hell, I guess my car motor doesn’t need any lubrication because those metal on metal parts are just “marrying”. No, your gun doesn’t need to be wet with oil but they need a very light coating of lubricant.
@mnrodriguez2 жыл бұрын
Agree 100%!
@truthteller670111 ай бұрын
Sorry very poor analogy. Auto parts are not made from hardened gun metal.
@dancruze12 күн бұрын
@docrock83 I agree.
@dancruze12 күн бұрын
@@truthteller6701what would be a better example? Imo.. The only reason to not lightly oil would be if the carbon or debris is collecting on the oil causing more wear and friction, etc..
@lkrueger94947 жыл бұрын
GunBlue - Thanks for this common man language concerning cleaning. Very simple. :-)
@henrymeguess55795 жыл бұрын
Last time I wrote was about scopes because with age I needed one for my Henry 22 later I bought my 1st semi auto pisol the Remington R1 .45. I love the weapon. It just feels solid. So tonight I started looking for proper cleaning. I have cleaned it once for practice purposes but Havn"t got to shoot it much so all that cleaning isn"t necessary bu I liked what you said about the oils and wiping down the weapon. Good video
@geico1975 Жыл бұрын
Always learning as much as I can and following every suggestion, treat my EDC (Sig p365X) the way recommended here have never oiled it except the wipe down at the end with a flannel/cotton cloth I keep in a zip lock baggie, lightly soaked with basic mineral oil. Clean it with Hoppe's No. 9 and wipe dry. That pistol has run flawless and looks brand new after nearly two-years.
@lesrinehartlr7 жыл бұрын
Smartest man on any firearm video truthfully
@Mr1gun8 жыл бұрын
My name is Joe and I'm a over oiler..LOL I never cleaned my .22's, because as a kid I was told .22lr never need cleaning due to the bullet lube used. I did and still do clean all my other calibers meticulously. I started cleaning my .22's a few years ago and recently been using less lubricant on my firearms.
@johnmpifer8 жыл бұрын
+Joe Simeone - I bet you're tempted to use 20W-50 in your car, too! LOL
@Mr1gun8 жыл бұрын
Actually I do use 20-50 in my work van or straight 30 weight in summer. I guess I'm easy to read.. lol
@royskaggs57509 жыл бұрын
Nice job. Thank you. I like the idea of no oil.
@34dawgsgo7 жыл бұрын
If the Ruger SR1911 is good enough for you, it will be fantastic for me being my 1st and only 1911. Thanks for your informative review sir.
@wrightconnection17317 жыл бұрын
That's what I was thinking too!
@THATMOFODIRT6 жыл бұрын
Same here. Needed a 1911 and decided to go with a used SR1911 45. The deal was too good to pass up. Ran 300rds of various 230gr FMJ and HSTs. Not a single problem. Hear great things about Ruger’s customer service regarding any issues.
@TheZotman5 Жыл бұрын
"You just clean the thing, and that's it." Fantastic quote.
@williamholcomb59793 жыл бұрын
Thank you all of your videos are very complete and informative. I have used wd40, also dry- labs in .22 magazine's. Everything you have taught is very vuble. You know we where issued heavy white oil/grease in militarily for M-16s and M-60 but m60s are in different categories I would say. You know well sometimes barrles would drop or bend down after a big long figh fight. Oh I am drifting off in to s whole other discussion. This is I know on hunting rifles and home owned fire arms. I don't realy remember that much about 50 cars and 30 cars. But I see everything you have said is right. I have been wrong in all my thoughts and ways of cleaning mostly oiling.. thank you for your highly-qualified knowledge of firearm care. You are very r y right...
@beanalog82024 жыл бұрын
Great video! Thank you sir!
@Andy-im3kj8 жыл бұрын
I have newly subscribed to your channel, you are a wealth of knowledge for me!
@flamesna49387 жыл бұрын
thank you so much for the information
@vikingtraveler26557 жыл бұрын
I really enjoy watching your videos and you always put things into prospective. I just purchased a 9 mm CZ 75 SP-01. Do you have any videos on the CZ? Thank you sir.
@bungalobill79417 жыл бұрын
Now that is some no BS common sense cleaning advise and instruction. Very excellent. I also have a 1911 that I have never oiled , and it has never failed to run. If someone has one that is failing to run, it is not because of a lack of oil.
@shebear47153 жыл бұрын
@GunBlue490 Many thanks for all of your informative videos! I watched as you brushed your revolver barrel from the muzzle toward the cylinder, and am thinking that must be how to clean the barrel of both my revolver and my 10/22. Being new to shooting, and VERY new to semi-autos, I thought working that direction was a big no-no, but they must need it. Will look at your comments on bore snakes, which I have been using in place of rods on these guns.
@JohnDoe-vq8bg6 жыл бұрын
Mineral spirits for carbon, brass bore brush, nilon tooth brush, cut up old t shirt patches, a jag, silicone rag and 3 minutes. Not a religion! Thanks for sharing!
@josephcarr27424 жыл бұрын
The jag follows the rifling turns as you push it through the bore, their all I use
@josephcarr27424 жыл бұрын
@Palm Coast Adventures you actually can but I don't you have to be careful of the muzzle of you pull it back I push through then remove it and go again, little more work but worth it.
@pugilist1028 жыл бұрын
I just got done removing most of the oil and grease from my guns, including my AR. Thank you.
@mnrodriguez5 жыл бұрын
Be careful!
@franny52953 жыл бұрын
@@mnrodriguez Why? I'm inclined to listen to people that have been there and done that but my manufacturers instructions expressly said there are six tiny places that need to be oiled lightly.
@dancruze12 күн бұрын
@@franny5295I'll go with what the manufacturer says and oil. But yes, too much oil can pickup debris. So use the correct amount imo.
@DS-gd1xw5 жыл бұрын
Good credientals being a certified armoror for Ruger, S&W. & Remington
@anthonyrusso91735 жыл бұрын
Gunblue: Again appreciate your expertise. I do go back to your KZbin channel a lot. I appriciate learning from you
@greglinsmythe33753 жыл бұрын
Love this guy’s shirts
@TheReloaderDude8 жыл бұрын
Had to sub because of the humor. Oil collects dirt.
@bengerman97363 жыл бұрын
You da man, you forgot more about guns than most people will ever know....keep up the good info and see you on the next one.