How to clean the RIA Rock Island Armory Premium M1911 A2 TAC Ultra FS HC 22TCM

Let's see how to clean this 22TCM 1911 from Rock Island Armory!
Email me: [e-mail]
Follow me at...
Guntube.org: travisp11
Gunstreamer: travisp11
UGEtube: travisp11
Facebook: travisp11
Twitter: @travisp11onyt
Instagram: travisp11onyt
Travisp11 gear: shop.spreadshirt.com/travisp11
Support me on Patreon...www.patreon.com/travisp11
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZbin) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZbin) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Don’t forget to leave Facebook and come to MeWe! (They won't deny you your 2A rights!)
mewe.com
Category
Education
License
Standard KZbin License
Category
People & Blogs
Category
Entertainment

[@BAdventures]

Cleaning and inspecting the internals is a safety standard. And helps you get better with that model each time. 22TCM is a bottleneck case, basically 223 short. Need to keep the chamber clean and lubed. Also run the internals wet with oil. Good demo and tutorial 👍

[@travisp11]

Thanks for watching!

[@lthomas4697]

Before I reassemble the guide rod plug I put the safety in the on-safe position to hold the slide and frame in the correct position. I learned that 56 years ago in AI training. Nice little helpful hint. Greetings from Hastings, NE.

[@travisp11]

L Thomas Thank you for the heads up and Go Big Red!!

[@lthomas4697]

@@travisp11 Yes, GBR!

[@KinkySphincter]

You literally saved a life with this video, Nightstryke’s life

[@travisp11]

Kinky Sphincter Well, it’s a shame he couldn’t have watched this first...or my SR1911 video!

[@islandprepperone]

Thank you for this video. Just brought my first RIA 1911 A2.

[@travisp11]

Very cool!

[@mgabriel2636]

Ooooh! is that doublestack?

[@travisp11]

M Gabriel Yup. 17+1

[@iLLBiLLsRoastBeats]

I have the 10mm model with a full length guide rod and can’t break it down to save my life

[@twistofcain_666]

Yeah, that 22lb or 24lb spring takes a ton of hand strength to depress and hold long enough to get the paper clip in. It's definitely doable though. Use a table to press down against for help.

[@rileykoupas46]

Just what I was looking for.

[@travisp11]

Right on!

[@jamesdelong6401]

Good morning and afternoon, Travis. Thank you for this video. I'm actually looking into purchasing this model 1911. Been looking for a 1911 and I know 💯 I'd be buying one from rock island company. Once I saw this dubble stack .45 acp. I was. HOOKED! looking for to getting one. This video will help out. Big time! Thank you once again for your in death video breakdowns. REALLY GOOD! Happy mothers day to your wife and your mom. 😎🤘🍻❤

[@travisp11]

Thank you for the kind words and I’m glad to help! Yes, we had a great Mother’s Day today!

[@jamesdelong6401]

@@travisp11 your welcome. I think I'm going to pull the trigger on purchasing this .45 acp rock island once I get my SRM ARMS 1216 shotgun of budsgunshop layaway. I've been wanting a rock island. 45 acp. for home defense and as a back for when I'm in the woods. Revolver be BEST. But with this rock island being a dubble stack. 45 and 14+1. 15 rounds of ether Buffalo Bore or dubble tap ammo. 👌. I'll be good to go when out in the woods

[@jamesdelong6401]

@@travisp11 what's a GOOD strong side holster for that BIG BOY?

[@travisp11]

@@jamesdelong6401 I have purchased Kydex holsters from many companies. Stick with one that will stand behind your holster if it has any issues. You may have some limitations on what is available for that particular pistol. Try We The People holsters or Alien Gear.

[@jamesdelong6401]

@@travisp11 ok. I'll take a look

[@filemongalvan3328]

Very helpful, thanks a lot man 🤝

[@travisp11]

Thanks for watching!

[@Teamaan]

Just what I needed! Thank you!

[@travisp11]

You're so welcome!

[@Teamaan]

First 1911 terrors ... your video was perfect tempo and not rushed while not being toooo long.

[@chrismcdaniel7901]

thank you for the video!!

[@travisp11]

Thanks for watching!

[@alvaroanchondo9191]

I'm trying to change the sights to my Rock island FS 9 mm pwhat side should I hit the sites from to take the stock sites with the new replacements I'm having trouble putting those on the one that came with the gun are very hard to come off I don't know if I'm hitting it the right place

[@travisp11]

alvaro anchondo I only have my sights replaced by a gunsmith unless the sights are the type that screw in. You may need to use a brass punch and hammer in order to get them off. Is there also a screw that needs to come out?

[@rogerhufano7194]

Sir do you have a user manual for rock island 1911 A1/a2 pistol sir

[@travisp11]

I don’t but you should be able to download it from the Rock Island Armory website

[@neildeleon14]

thanks

[@travisp11]

You are welcome!

[@charito_ur]

where did u get that model?? hard to find that one. wow

[@travisp11]

The owner of the pistol found it going through Davidsons Gun Genie search but back when I made this video you could buy this particular model through many gun stores. Not so much today.

[@Jklp000]

I have this exact same pistol! Beautiful to say the least. Does anybody know how I can take the grips off though? I’ve searched for it but it seems that every other 1911 has a different type of screws. I’ve looked in my tool box and couldn’t find anything to take them screws off. Thank you for anybody with an answer!

[@travisp11]

I wish I had an answer. I will give the owner if this pistol a call and see if I cant find out.

[@23JAY3L23]

Is this version both 9mm and 22tcm

[@mtusarmy1]

Nice

[@travisp11]

Thanks for watching!

[@ReddKumaJaxon]

💯💯💯🤙🏿🤙🏿🤙🏿

[@DasSnakeBoy]

Is the lower one piece or two?

[@travisp11]

Good question. I believe it was just a single piece frame

[@jamesdelong6401]

What happened to your buddies over at SS Pawn? I see that they are closed down.

[@travisp11]

Stan the owner retired. It was run by just Stan and his wife.

[@jamesdelong6401]

@travisp11 Good evening, Travis. Well, good for them. Tell them both that I said. Happy retirement, and enjoy it. O! Do you have a video of a full teardown of the M&P 2.0 slide?

[@khadijahdavis1572]

Great video brother i just bought this gun

[@travisp11]

Thanks for watching and enjoy!

[@keven1101]

Magazine suggestions? And base pad?

[@travisp11]

You can buy them online from many retailers.

[@keven1101]

@@travisp11 I'm assuming that any p18 magazine will work right?. Idk any other brands that make them

[@travisp11]

@@keven1101 I honestly don't know. Id only stick with the RIA mags.

[@BAdventures]

This double stack RIA model uses MecGar P18 9mm / 38 super mags. The extended magwell requires extended base pads. If you can't find the factory ones there's: Ronin's Grips, RIA/Act-Mag plastic base plate; and Dawson Precision Baseplates, for Para HiCap, aluminum metal.

[@user-ku4ki7nc7q]

That gun should have had a 9mm barrel and spring , mine did

[@luisechevarria6930]

It's a 45 acp .....this 1911 is palmetto armory

[@fuzzynutz069]

Does not apply to the 10mm.

[@iLLBiLLsRoastBeats]

Why not?

[@fuzzynutz069]

​@@iLLBiLLsRoastBeats 10mm has a solid 2 piece guide rod and no barrel bushing.

[@iLLBiLLsRoastBeats]

@@fuzzynutz069 does the slide still have to be on the frame to release the spring for the guide rod? The 10mm ultra fs hc is my first 1911 and I’m having a really hard time breaking it down 😐

[@twistofcain_666]

​@@iLLBiLLsRoastBeatsno.

[@9unslin9er]

I came because I thought the barrel bushing removal was different because of the "bull barrel" on the .22TCM. But seriously my man, you are way too chatty. This video did not need to be 16min long. Dissassembly: 1) Depress recoil spring plug 2) Rotate barrel bushing clockwise to 7:30 3) Remove spring plug. Avoid becoming blind 4) Move slide rearwards/align takedown notch with slide stop 5) Remove slide stop 6) Remove recoil spring 7) Remove guide rod towards breech 8) Rotate barrel bushing counter clockwise to 4:30, and remove 9) Remove barrel towards muzzle 10) Put frame on safe. Clean. Reassemble in reverse order.

[@travisp11]

It’s a problem that I have but I also try to answer a lot of the questions noobs have after they watch a video. I guess I prefer the Bob Ross approach to taking you on a cleaning journey.

[@9unslin9er]

@@travisp11 No worries. your heart's in the right place. I would like to know how to take the base pads off the magazines for service. Looks a bit trickier than a button through hole like other similar mags. Also. tip for this type of recoil spring plug: Use a wooden dowel, or a Bic Lighter to press it down. Saves the thumb. 👍

[@travist3379]

This could be fun lol

[@travisp11]

Can’t wait to take it out!