How to Clean up the Rim of Your Epoxy Tumbler DIY Tutorial

Thank you for watching my tutorial on how to clean up the rim of your epoxy tumblers using acetone! Tumblers are super easy to make and they are all so incredibly unique because no two are ever the exact same. My DIY tutorial videos are designed to explain just how simple it can be to woodgrain and/or decorate stainless steel tumblers.
We have officially launched our KCC Glitter website, check it out here! kccglitter.com/
Please join my Facebook community! / epoxytumblersandpens
About me: I have been making epoxy tumblers for approximately five years and have decided to share my methods with aspiring cup makers. Everyone's methods are different and I just want to share what I have found to work best for me!
Buy me a Coffee 💕 No pressure at all but if you would like to help support the channel and the tutorials I create, you can use this link to leave a tip. 💕 www.buymeacoffee.com/KCCyoutube
Please feel free to comment if you have any questions at all! Below is a list of links to some of my favorite products that I use the most to make my tumblers.
If you enjoyed my video, please give it a thumbs up and hit the subscribe button to see more videos like it!
Recommended Glitter:
KCC Glitter: kccglitter.com/
Tumbler Supplier:
MakerFlo - bit.ly/3RQMflM
Products I use frequently and highly recommended:
Faux Rizzle Epoxy - amzn.to/2IT02dI
Counter Culture Epoxy - amzn.to/3pRzFW6
Chip Paint Brushes - amzn.to/373Z4V7
Alcohol Ink - amzn.to/3oH4paG
Rust-Oleum Flat White Spray Paint - amzn.to/3nILLz1
Cup Turner - amzn.to/3l1xBaw
Blinggasm Waterslide Paper - amzn.to/3fcRiL8
Butane Torch - amzn.to/3pM06wr
Rust-Oleum Gloss Clear Spray Paint - amzn.to/2HfFKKm
Gloves - amzn.to/36QSrUP
Silicone Mats - amzn.to/32YW5Lf
Cup turner motors - amzn.to/2IWXBGI
Plastic mixing cups with measurements - amzn.to/3lLARrG
Medicine cups - amzn.to/3kQFQWC
Zippo Butane Fuel - amzn.to/3lT39Ra
Cup Turner Foam Inserts - amzn.to/2UKBQfE
Painters Tape - amzn.to/3lRGuVa
Popsicle Sticks - amzn.to/3nG33fU
Connect with me on Social Media!
kristicustomcreations
kristicustomcreations
Video music from Epidemic Sound, you can try a free 30 day trial by using my link! www.epidemicsound.com/referra...
*Disclosure: I only recommend products I would use myself and all opinions expressed here are my own. This description box may contain discount codes and affiliate links that at no additional cost to you, I may earn a small financial benefit. As an Amazon Associate I earn from qualifying purchases. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.

[@pinkchick2343]

Thank you!!

[@KristisCustomCreations]

You're very welcome!

[@marissawilson6892]

I’m new to epoxy and found this video very helpful. Thank you! :)

[@KristisCustomCreations]

You're very welcome! I'm so glad you found it helpful! 🥰

[@shellychoinski2542]

How long should I wait to wash tumbler after last coat of epoxy? Thankyou btw

[@KristisCustomCreations]

Until it is completely dry to the touch. If you handle it too soon, you will leave fingerprints in it and possibly mess up your final coat. .

[@pamkyllo51]

Where did you find that sandpaper that is sticky on one side?

[@KristisCustomCreations]

I buy it on Amazon... Here's the link to it 🥰 amzn.to/3nYqOCL

[@sonyajuarez8976]

I did this to a tumbler I did and I guess I broke the seal and water got in between. Is there a way to clean it up without breaking the seal?

[@MileyonDisney]

Is there a liner that goes inside the tumbler for keeping the drink cold or hot, or is it just a single layer of stainless steel?

[@KristisCustomCreations]

They are all double wall stainless steel tumblers that I use... Like a Yeti or RTIC cup.

[@jeepj27]

Hi Kristi! Thank you for this video!! I am beginning with Tumbling... when I try to clean the inside, I find there is often epoxy in there... Alot of people say to use Xacto knife to remov it, but I am finding I am scratching the insides of the cups and they are quickly becoming display cups! :) :).... Can you give me some advice on how to deal with this?? :) :

[@KristisCustomCreations]

Hey there! I use a knife to pop off any epoxy that gets inside my cup and don't usually have any issues with scratching. The biggest thing is to be very careful when applying the epoxy and don't ever pull epoxy into the inside of your cup. I always start at the bottom of the cup when I'm smoothing out the epoxy and push up from there... that keeps epoxy from getting inside. I hope that helps! I'm sorry for the slow response... I needed to take a break from KZbin for a bit.

[@Shadingoftheheart]

Great tips! Where did you get your flat razor? Thanks!! 💜💜💜

[@KristisCustomCreations]

I have literally had that flat razor forever... I think I might have bought it at Walmart but I'm sure you can find one on Amazon.

[@alyssabiviano2436]

How do you fix the top edge on the cup that was maybe rubbed from the actual spinner? I have one cup that no matter how many coats of glitter and or epoxy I use, it turns black at the rim. Please help.

[@melindawood4858]

Where did you get that acetone bottle please? How convenient!

[@KristisCustomCreations]

Just bought it at the Dollar General in the nail section... It's seriously so convenient!

[@JENNOLDHAM10]

I have driplets all around my tumbler how can I get them off with a sandpaper.

[@KristisCustomCreations]

Are they around the inside rim of your tumbler?

[@normaulisanayelig5628]

I should’ve seen your video first before doing anything else cause I did not do any of those steps. I went straight cutting the edge with a blade and I cut too much on side that the you can feel the fabric. What do I do? Help please

[@normaulisanayelig5628]

@K M thank you so much I will do that. 😉

[@KristisCustomCreations]

I'm so sorry that I'm just now responding. I'm sure you've probably already taken km's advice, but I would suggest the same thing. Put another coat of epoxy on it. 😊