You're underrated man, truly. Thank you very much!
@LaserEverything Жыл бұрын
Thank you, and thanks for watching!
@chrisherringshaw35882 жыл бұрын
Really fantastic series, and stupid good timing - have a JPT on the way and just discovered Lightburn for Galvo's is about to release, and now this tutorial series. Amazing - great job, truly.
@LaserEverything2 жыл бұрын
Welcome aboard! Glad to hear it, and congrats on your new machine! Hope you'll join us in one of our communities too :) See ya soon!
@rickieboyd5769 Жыл бұрын
Couldn't have gotten this done without your videos!
@LaserEverything Жыл бұрын
Glad they helped!
@mowermicah78802 жыл бұрын
Fantastic tutorial! Thanks for taking the time and effort!
@LaserEverything2 жыл бұрын
Glad it was helpful!
@plankie19652 жыл бұрын
Thanks Alex. Really appreciate your work
@LaserEverything2 жыл бұрын
I appreciate that! Glad you're liking the series!
@SmithAerosports12 жыл бұрын
We are off to a great beginning 🤘🏼
@LaserEverything2 жыл бұрын
Glad you think so!
@shaunwallis15012 жыл бұрын
Again bloody good work. This going make things easy. Can't wait try fiber on lightburn . Use one programed for every thing
@LaserEverything2 жыл бұрын
Just a couple more days!
@bozasuarezjoyeros65792 жыл бұрын
Muchas gracias por tu tiempo, empiezo hoy con el curso rapido, espero poder subir rápido a la ola de lightburn
@LaserEverything2 жыл бұрын
Good luck, have fun!
@BigHWorks Жыл бұрын
Most excellent - thank you!
@LaserEverything Жыл бұрын
At your service Alan 😎
@RainSuursaar8 ай бұрын
Thank you. I have xtool laser and I have one question. Biggest headace question :) Workplace is approximately 400x400mm. If I need to engrave 30x50mm area. How can I do that? How can I set a specific starting point. I use lightburn.
@user-re7en6hv9u4 ай бұрын
Is it possible to set up the work area such that it's centered at 0,0 instead of having 0,0 in the lower left corner?
@Goneaway-4-gud10 ай бұрын
Whoa…. Heads spinning chasing your cursor on circles….A to B to C steady is less eye strain! Other than that…the vids are brilliant ;)
@user-xc5fz1ll4f2 жыл бұрын
thank Alex, I watched a video for you explaining how to attache parameter library to EZCAD, but it didn't work with me. Could you please help me out of that?
@LaserEverything2 жыл бұрын
Check out the Discord Server or Facebook Group for support, links in the description of the video.
@jaymalone5172 Жыл бұрын
I have a Thunder Laser Aurora coming. I am familiar with LightBurn, will I have to install EasyCad as well?
@JohnDoe-cm2ot Жыл бұрын
These videos are great! I do have an issue that isn't addressed here. My laser (ComMarker 50w with windows 10) sets the images as reversed and rotated clockwise 90 degrees. On my screen the image is correct. Does anyone know how I can fix this?
@AcryliWoodDesigns9 ай бұрын
Hi! How do I increase the size of my workspace? Thanks! Marie
@charlesrosenbloom4140 Жыл бұрын
why are work area larger than the lens size in your videos? like you had a 150mm lens and the work area was like 186mm
@LaserEverything Жыл бұрын
Corfile lens corrections overwrite the advertised lens size with the true lens size. You still only want to use up to the advertised workspace size marked on the lens but the advertised specs are approximate, not exact.
@rohanboyd4120 Жыл бұрын
Greetings. I am using the trial version of lightburn. The problem I'm having is when I type a text on the screen and preview it, it looks ok. On the material it's showing a different direction and if I move it to the left or right with the arrow keys it moves in a different direction. The text is horizontal and on the material it is showing vertical. Any suggestions will be appreciated.
@LaserEverything Жыл бұрын
Could be one of two things - your workspace is either rotated like you have your laser rotated to the side but youre looking at the software straight on in which case you'd set Angle under your device settings to 90 or 270 - OR - your galvo 1 = x or galvo 2 = x is set incorrectly, also in device settings. Try playing with those to see if you can get it right. A few episodes after this one we go into how to generate lens correction profiles which will fix this automatically for you.
@rohanboyd4120 Жыл бұрын
Thanks for the response. Will try that
@theboredone_alt2 жыл бұрын
How many laser machines can you control with one computer? one galvo and one co2? or you can control as many as you have? Please advice
@LaserEverything2 жыл бұрын
As many as you want. Episode on this very soon.
@foaadjarjura1983 Жыл бұрын
I downloaded the trial version and want to buy the key. But I have a problem when I use the LightBurn program, it stops with ezcad, why?
@LaserEverything Жыл бұрын
Ezcad and lightburn use different drivers so you can only use one at a time, we talk about it a little further into the crash course and teach you how to switch between the two quickly.
@foaadjarjura1983 Жыл бұрын
@@LaserEverything Thank you very much. But can you tell me how can I do that
@peterchan217 Жыл бұрын
Hi, can i adjust the home position (the coordinates the laser start firing) in Lightburn for my Galvo laser? i could do it easily in Ezcad in the Param button (offset X and offset Y) but i never found the same function in Lightburn. Would you have an idea about this? Many thanks.
@LaserEverything15 күн бұрын
Sorry for the delay, and absolutely if I'm understanding right. It's in the device settings of lightburn where you can offset field position. Hope that helps!
@polakis19752 жыл бұрын
Alex, lightburn galvo is different program and co2 gantry that i use is different also? I mean, can i use galvo and classic co2 gantry in one lightburn version combined?
@LaserEverything2 жыл бұрын
Lightburn is one program but you will require an additional license in order to unlock the galvo functionality in your copy of the software.
@polakis19752 жыл бұрын
@@LaserEverything yes, i know that. So when i purchase the second license for galvo, i will operate one single program (my existing one) for both, correct? If so, different lenses, same program also, or one copy for each lens as ezcad? Thanks!
@shark926512 жыл бұрын
@@polakis1975 You can run as many lasers as you want in a single install. In the device list you can right-click your laser to duplicate it and setup for a different lens size.
@polakis19752 жыл бұрын
@@shark92651 thanks for clarifying!
@paulriley59402 жыл бұрын
So i can import my corfile Ezcad into lightburn?
@LaserEverything2 жыл бұрын
Yep, we cover it a few episodes after this one.
@paulriley59402 жыл бұрын
@@LaserEverything I found the video a few down from this one thanks
@freshprintz33562 жыл бұрын
Hey, trying to join the facebook group. My requests keep getting canceled. Just found the group in search today. Now i cant see the group.
@LaserEverything2 жыл бұрын
Hi, try again and make sure you're answering all membership questions.