How to Configure the Motor For The FT Tenet // BUILD

[@sebastianmuzeja6516]

For those who were also confused - in the pusher (trainer) configuration the motor will spin clockwise and the numbers on the prop always face the direction of motion! Just make sure the spinner is tight :)

[@BillKisel]

That motor mount is a pretty cool design. Now get to work on one where you can set two thrust angles. 😊

[@lienmeat]

What are the official ones printed with? I've had bad luck with PETG. Long version: I made something similar, but the screws got so hot with the FT PP A radial motor that it melted the PETG I printed them with and the motor became VERY loose and the screws probably would have come out if I had flown too much longer. I tried using thread locker but it didn't stop the motor loosening up due to a bit of melting.

[@edsondamasceno6151]

Muito bom este tipo de montante, pois assim fica muito mais fácil para montar.

[@jwc4520]

Interesting motor mount shall have to print one ...

[@minezyo7335]

Someone PLEASE answer.. What direction should the motor angle be oriented on tbe tractor configuration?? Up, or right? The pusher is angled up as per Joshs video instruction however they make no mention on the angle of the tractor style motor.. Please help as there's nothing on ftca either...

[@kf4293]

Down and right, as seen from INSIDE the aircraft. P-factor wants to pull you up and left. This assumes a "standard" counter-clockwise rotating prop, as seen from outside and in the front of the aircraft.

[@johnboleyjr.1698]

FT Tenet Gull Wings? Please.

[@nikhilneumann5411]

Hi

[@JollyPirateAhoy]

Ahoy