Am I the only one who watch this five time and yet couldn’t understand anything 😅
@johncoburn47844 жыл бұрын
Thanks for this. Simply put. Every other video just made things so much more confusing than it needed to be.
@Techgeniusideas3 жыл бұрын
john coburn basically find positive from the back of the radio and the ground. Connect them to the camera power. Connect the camera plugs and that is it
@Techgeniusideas3 жыл бұрын
john coburn How to install a Backup Camera Any Toyota Camry 2012-2013-2014 - Step by Step (Problems are Fixed)
@vhamjr81062 жыл бұрын
Straight to the point! Wish more videos on youtube were this simple. No silly music or "like, subscribe" bs. Thanks!
@huule86722 жыл бұрын
Great video and easy to understand. I like that you didn't un-twist all the wiring and intertwined while explaining it so it made it easy to follow.
@Kdubb2106 Жыл бұрын
FINALLY a clear explanation of where the wires connect to. Thank you!
@nutsackbear8053Ай бұрын
Not really! The red and black wires are for a continuous power supply incase your head unit allows you to view camera while not in reverse! If it doesn't, you don't even need to connect that pigtail! All you need is the video plug and to run that single wire to the reverse light posative!
@robsonmartins558724 күн бұрын
@@nutsackbear8053 If you use canbus decoder, no need to conect on the reverse light positive.
@prestoncoddington5219 ай бұрын
The red convience wire makes so much more sense now. Thank you so much
@bimron39103 жыл бұрын
Good video. Keep making straight to the point videos. 👍🏿
@stingray4mesidewinderbandga2 жыл бұрын
Got my backup camera working finally in my 2010 tacoma. the factory one didn't work with the pioneer nex 1400 stereo. I bought a $15 cam from walmart & it still didn't work. I bought another $15 cam today from walmart & this one worked !
@badboys500 Жыл бұрын
Thank you . Seriously.... I've watched multiple videos on install reversing cameras . They either started off saying one thing and changed half way through or the relative of the village idiot came on . Watched yours clear easy simple instructions. Had it installed within minutes
@gerardoarcegmailcom3 жыл бұрын
Thanks a lot for the clear and easily understood instructions!
@ricardosoto4824 ай бұрын
This is one of the nicest videos I've ever seen. Very clear that mine installed the same day. Thank you for the video
@jakewelsh10022 жыл бұрын
I’ve watched so many of these videos and out of all of them this is the one 🏆
@garydurandt42602 жыл бұрын
Good clear and understandable video, many thanks
@AngelHernandez-lv7xy4 ай бұрын
Thanks for making it clear and easy to understand I watched 4 different videos and didn’t understand a thing
@MikePaige2 жыл бұрын
Great video guide! Greatly appreciate this one! This install was killing me until I found this!
@fredthe52 Жыл бұрын
Very good and short explanation Thanks
@abdallahtamimi9650 Жыл бұрын
Even i didn't complete i .. I understood the concept very fast and apply it on my car and it work perfectly .. Thanks for the good brief ... Good video
@stevedimitrakopoulos89232 жыл бұрын
Thanks 👍 very straight forward.
@abdslil10542 жыл бұрын
very easy explain method. you fit to be teacher, thanks sir.
@brookcampbell68382 ай бұрын
Thank you mate, I have the exact camera and the instructions are shocking.. This explains perfectly.
@jeffstewart9503 Жыл бұрын
Very helpful and clear. Thank you!
@Maxwellp100 Жыл бұрын
Very straight fwd other videos u still scratch your grey hair on your head but this is on point .
@gowannlee Жыл бұрын
Thank you so much, I was just about to burn the whole lot😂
@Dabeast2004 Жыл бұрын
What if you are doing a front camera and don't need a reverse power wire?
@salamatpo7326 Жыл бұрын
Good video
@douglasgeorge53902 жыл бұрын
best video out there. So so simple.
@menoaz2 күн бұрын
What color is the single wire going to be at the radio side to connect the backup camera? The one that is attached to the RCA plug.
@codypatron596821 күн бұрын
Ok I have a Kenwood DDX model with the camera button so I need to run separate purple wire from the reverse trigger wire? And then the red wire from the camera connects to the red from wire harness? And of course need to tap into the ground wire.
@lamarcraven2314 Жыл бұрын
You made it look very easy sir. I appreciate it. Thank you very much. I’m gonna try it and if my car explodes, I’ll let you know. Lol 😂😅
@muradturanov50455 ай бұрын
Simple👍👍
@antfooo3 ай бұрын
Best explaination
@alonsoamezcua23863 жыл бұрын
Whata a good backup camera license plate style
@antlou1232 жыл бұрын
What if you just need to hook it up to the factory back up camera?
@unknogne Жыл бұрын
yu’re on the wrong video, says aftermarket, not factory
@SpecialAgentDepak Жыл бұрын
I’m pretty sure the C6 never had a backup camera across any spec for the generation, so it would be impossible to install a factory backup camera that never existed. And if you meant to factory radio it doesn’t got the input connections for it sense they never had a back up camera for the generation.
@adrianlunnon3514 Жыл бұрын
I’ve recently followed your video I have a canbus box on my caddy but camera wouldn’t trigger any ideas? Camera leds wouldn’t light up so I’m guessing no power but the reverse on the head unit was working fine just no signal to the camera
@przegaming28512 жыл бұрын
thanks for making this video so simple thats all i needed
@phoenixautomotive43362 жыл бұрын
Glad it helped!
@inlafreedomfighter Жыл бұрын
Great video. First that actually made sense
@nemanjabojic21782 жыл бұрын
great video thanks for the help
@dtrip384110 ай бұрын
Thank u simple n straight to the point
@ethanlittle776 Жыл бұрын
Reverse signal feed goes to pin 1 on iso plug. Had trouble finding that anywhere
@linnsoltwedel2 жыл бұрын
What if you have a camera already, can you not just switch out the camera it self? Or is their usually different connections?
@tizzywilson2 жыл бұрын
Hey bro, does this connect to any car camera or do you have to buy the camera separate?
@cahlitox Жыл бұрын
Thank you very much for your video. The manual of my camera doesn't even mention the red wire attached to the yellow male to male video cable.
@kevinryan11998 ай бұрын
I’ve wired like this but camera does not turn on and I have no video signal to the head unit. Is there a way to test the camera with a multi meter?
@anthonyscott51344 ай бұрын
Now for us complete novices who’ve never done something like this but want to, can you make another video actually going through each step? Also, walk through the connections for setting up the camera to be used as a front camera.
@macteesac Жыл бұрын
I have a stock toyota corolla touch screen deck. I dont have the yellow rca plug behind my deck to connect but i see other ppl able to install camera anyways. Is there some type of adpater for my stereo? Please lmk
@joyroc88510 ай бұрын
Does the single wire need to be 12v all the time or when in reverse only?
@tonycervantes48162 жыл бұрын
Great video bro.. buen video bro
@leasegrandcayman8747 Жыл бұрын
Could the "reverse" wire coming out of the stereo be shorted?
@platamon1 Жыл бұрын
Best Video Ever 👍👍 👍 thank you
@alexdmd2 жыл бұрын
Simple and understandable. Thanks!
@winkydinkandyou3 жыл бұрын
This is correct except were it plugs into the stereo. In back of the 13.3 androide it plugs into the ccd-2 and the trigger is on the same plug with the wifi cable.
@enelabek9273 жыл бұрын
Hello Can you advise if the black is always going to be ground and red power? i am trying to connect the camera to a kia forte 2015 brake light and there is a black red and green wire Thanks in advance
@user-fj6bx5bo7z4 ай бұрын
I bought the 07 to 14 Tahoe Phoenix automotive radio. The only wire that I can hook to is a blue wire for an amp and a brown wire for a break. Do I hook it to the brake wire
@user-fj6bx5bo7z4 ай бұрын
Plus didn’t know if there a setting to change
@Funktastico Жыл бұрын
The RCA female and red power female plug started off the same point , but the RCA red wire is much shorter than the power red-black wire , so how does the 3 touch together ? Extend the RCA red wire ? Or splice into the beginning of red-black power wire to connect the RCA red wire , then splice again at the end into the reverse light power.
@AcheDoss4 ай бұрын
The RED wire that is along with your yellow to your devise I split in the middle and from there I connected the other one kind of like a "T" if you understand I hope you do you'll get it
@laredoTC3 жыл бұрын
How can I make my oem camera 2015 Tahoe work no picture or harness to connect or did I miss something out Thanks
@olamideajayi46612 жыл бұрын
I messed up my alternator and battery trying to install and final got it right after watching this
@rgc_clips50283 жыл бұрын
I installed a side camera and enabled the settings to show when right turn signal is activated but it doesn’t work. Do I need to get the camera power from the turn signal? If so will the camera turn on and off with the fluctuating signal light?
@john-johnvanhamme3066 Жыл бұрын
Hello friend, thanks for the video. I only have one question please, where can I connect the ground black cable ? Thank you very much 😊
@patrolofficial15302 жыл бұрын
Very useful it helps me very well ,thanks u sir I just like an d subscribe to ur channel
@jeffbrownbbccarpetcare2 жыл бұрын
Great video! What if you want the camera to stay on while you drive , like a rearview mirror ?
@caligaming93862 жыл бұрын
You have to connect the power source to somewhere other than the rear brake light.
@Chon-c Жыл бұрын
@@caligaming9386 That’s if you want the LED’s on the camera to burn ALL OF THE TIME. The red plug at the camera is only to power the LED’s. The camera itself gets power from the yellow plug at the radio. This is why the “convenience wire” was added later. So you could view the camera (if radio has the option inside of it ) without the LED’s burning all of the time . When you tie in the “convenience wire at the tail light “? That just signals the radio to show the view without hitting the button in the radio . And turns it on when hitting reverse. This is NEVER explained in videos. The RED AND BLACK ON THE PLUG AT THE TAILLIGHT “? It’s only powering the LED’s in the camera. The camera gets power (because it also has a positive & negative ran inside of a single plug ) from the yellow plug at the radio/head piece. Explaining this would take all of the complexity out of it.
@Techgeniusideas3 жыл бұрын
This is an awesome demonstration
@phoenixautomotive43363 жыл бұрын
Thanks.
@jarredelliott9033 Жыл бұрын
Does this work with an rcd 330 and if I need other connections or anything can you please assist 🙏
@ZakuZak3 жыл бұрын
Thx you for help
@JoseHernandez-fm4yj3 ай бұрын
I added a secondary camera, a front camera but the image is inverted. I know I can flip the backup camera but can I flip the front camera?
@robertfomitescu13212 жыл бұрын
if you habe can bus , do you need the red cable to the unit? and how you cand find if you have can bus?
@mohamedyoosufbyroos65873 жыл бұрын
Hi Thanks for your videos, very helpful. I bought this item and I fixed it. When I switch the reverse gear everything works fine but when I switch on (start engine) it shows two displays in the monitor, I mean two pictures running at same time in one monitor. Can you show a diagram how to fix this item please? Thanks. This is the item I am talking about: 360 Degree Bird View System 5" Monitor Auto Car Recording 4 Camera Panoramic | eBay
@Kylebechtold3 жыл бұрын
Can you advise what the reverse trigger wire is? My unit doesn't bring up my camera. Truck wasn't factory wired for one so no stock reverse wire. I have my reverse positive wire tapped just need to know what to tap on the headunit. 13.6 px6 tundra 2010
@phoenixautomotive43363 жыл бұрын
The wires are labled.
@Techgeniusideas3 жыл бұрын
Kyle Bechtold I talked about this. How to install a Backup Camera Any Toyota Camry 2012-2013-2014 - Step by Step (Problems are Fixed) You don’t need trigger from rear light
@smitty84033 жыл бұрын
I know your post is about 5 months old, however, when hooking up this camera, the Reverse Trigger wire is the power wire running to you reverse light in your tail lights. This is the white reverse lights not the red break lights or the yellow turn signals.. So when you put your car in reverse, the white lights shine so you can see when backing up. You will need to tap into the wire that runs to that bulb For most of my cars it is a green power wire and a black ground wire. That will send a signal to your camera when you put it in reverse.
@kunalpaonikar1132 жыл бұрын
While we cut reverse light wire to connect camara red wire. Does warranty voids?
@koksalan752 жыл бұрын
Hello. I have installed this xamera on my car and it worked fine for some time but now it is operating very slowly, basically lagging be it in selecting the menu options or the camera it self. Any idea why this could happen and how to fix it?
@tvsf9 ай бұрын
when i hook up to tesla style for 2009 lexus rx350 i get black and white and like 6 split screen on monitor ? can you please help?
@mixme8655 Жыл бұрын
Thanks sir
@leasegrandcayman8747 Жыл бұрын
I connected everything as per the video as I connected the red "power" wire to the "back up" lights. I did that, because the "back up" lights only get power when the car is put into "reverse." Since I only want my rear view camera to work when my car is in "reverse," I thought that this is the logical way to do it. Well, I am getting a "No Video Signal" message on a black screen! Any advice?
@hanhan7471 Жыл бұрын
You said the black wire connects to the reverse back light?
@frankdolores619911 ай бұрын
HELP! how to connect the 3 cables? to the back of the headunit, since the red cable of the 2 rca males doesnt reach the back of headunit?
@martinbullla7654 Жыл бұрын
See that's what I thought I've hooked up back up cameras plenty of times before I got the RCA running with the red wire in it for the trigger and then I got the camera running off the other reverse light so I'm not drawing too much off the one cuz off the one it didn't want to work so I did it off the other one and just with the ground wire hooked up and the power wire unhooked just for the camera it was still trigger the radio to pop up the screen for the backup camera but if I hook up the ground for the camera it puts my amp into protect and it takes away the backup screen and then dims my backup lights how is that possible with just the ground wire hooked up for the camera and only the trigger wire hooked up for the radio soon as I plug that RCA in to the camera it does what it does and puts my amp into protect dims my lights and kicks the radio out of reverse
@rafiulkabir2 жыл бұрын
Hey can you please explain camera wiring for front camera. Thanks
@alkurdy92 жыл бұрын
What is the red wire connected to?
@ricric-po4pq Жыл бұрын
how do you override if want the rear camera to come on while driving forward ???/
@smalliebigs67842 жыл бұрын
Will wiring it this way allow my camera to turn on when in reverse and when I’m driving and select the reverse camera option on my double din?
@alyanabeltejar45382 жыл бұрын
Did u figure it out
@smalliebigs67842 жыл бұрын
Alyana Beltejar yeah i just got done with the install a couple days ago following this vid, only thing is the Line out put converter he linked different than one in the vid so I ended up using the PAC LP5-4
@mohamadesmk7 ай бұрын
1:37 “black wire goes to ground” What Ground? More specification please
@adrianwt38482 жыл бұрын
Thanks mate. Now I know why it doesn't work
@erickeeley76885 ай бұрын
my unit doesnt mention anything reverse related, and only loose wires are brake and amp control
@jordanm25067 ай бұрын
So no need to tap in to the reverse tail light?
@GrizzleGear3 жыл бұрын
I used this exact configuration in my 2016 Nissan leaf. I am using a pioneer DMH-220EX. When I put the car in reverse, or go to the camera view on the head unit, it just says caution the video may appear reversed But there is no video. I'm stuck.
@kengardner50972 жыл бұрын
If you use the reverse power you dont need a trigger at the head unit.
@AcheDoss4 ай бұрын
How many blown stereos caus it's about to add 1 more
@user-qv5cy9pm4b2 ай бұрын
I feel the same way.
@marchiegalorio5751Күн бұрын
What about the ground wire where i can connect?
@vernonmartin43273 жыл бұрын
How & what is hooked up to mona ter ?
@anytimefitnesslithia87793 жыл бұрын
See all sorts of videos for backup camera install. Trying to add a front camera to PXS6 unit on a 2018 Nissan Titan. Please can someone tell me how to connect a FRONT camera to the unit.
@ssgsilver62434 жыл бұрын
Can you do a video on adding a front camera?
@phoenixautomotive43364 жыл бұрын
Johnpatrick Murphy just connect to front cam rca port. Others are same
@luispimentel54292 жыл бұрын
How can I get my front camera working ? I got the reverse cam working but can’t figure out how to get the front cam working . Not sure where to connect the red wire behind the head unit . I connect it with the reverse one , it turned on but I cannot view (and it has its own rca front cam)
@chrisyo22 Жыл бұрын
Why is the red wire coming off that yellow RCA so short on the back end if it needs to go all the way to the reverse light? The power wire that's ajoined to the ground wire is nice and long, why is the other one not? They could have give us at least one meter...
@bsmart2293 жыл бұрын
Thanks
@vehicledigital Жыл бұрын
Thank you for you perfect video ! Hope to cooperate with you soon !
@frankierwhereyouralwaysast9032 жыл бұрын
My back up sensors don't work when in reverse on this radio. WHEN I use my factory radio it does work. Any help on this would be greatly appreciated, do you know how to make the sensor part of the back up camera (car image with sensor feature) to work ?
@robsonmartins558724 күн бұрын
i have a ford focus mk 2.5 with the androind unit. The solution is putting a canbus decoder and you will be able to switch on the sensors.
@FootballIconic365 Жыл бұрын
Me after watching this video: thank you, a front camera will be enough for me
@meckelkuin3 жыл бұрын
I bought a px6 for my 2006 lexus is 250 I has the navigation system and back up camera so I want to keep my OEM back up camera can you tell me how can I do that
@phoenixautomotive43363 жыл бұрын
You need to do some wire cutting and splicing.
@pod00043 жыл бұрын
@@phoenixautomotive4336 can a Phoenix person come did the wiring and cutting?
@phoenixautomotive43363 жыл бұрын
@@pod0004 You can come to our location.
@pod00043 жыл бұрын
@@phoenixautomotive4336 in California? I'm in Texas.
@phoenixautomotive43363 жыл бұрын
@@pod0004 Yes, we are located in LA.
@MrFruityDJ Жыл бұрын
Hi I do not have video input cable in my navigation, what to do ?
@airbornej27078 ай бұрын
And mine never came with a manual.i have the green and black box you have to the right in the beginning of the video