How to connect the mitsubishi Electric MAC-567IF-E or MAC-587IF-E in less then 10 minutes

[@pse2428]

Very good : precise, concise, efficient We wish all the tutorials on yutube were this good!,

[@todayhvac]

Thank you very much

[@Jedrek.W]

Thank you very much for sharing your expertise in such clear and easy way! You helped me a lot.

[@todayhvac]

Glad it was helpful!

[@laurentr6197]

Thank you so much for your guide : clear and effective ! The only issue : email adresse doesn't work. Need to connect with wps on your wifi router.

[@todayhvac]

Hi, Sorry for my misunderstanding of your question. what do you mean "email adresse doesn't work"? do you mean that you can't connect to the wireless configuration screen by type 192.168.11.1(min 2:59)? or something else

[@todayhvac]

by type 192.168.11.1 ?

[@superquax1]

very cool, thank you very much and cheers from Germany :-)

[@sampaakki]

What an excellent guide. Well done!😃

[@itayran981]

Thank you very much for the response, I really appreciate it

[@andrewferguson3264]

Good guide, very helpful. Thanks.

[@ivodinisferreira4239]

Great video I have a EHSC-VM2D. Where is CN105 located?

[@todayhvac]

the CN105 connector(Red color) located On the right side in the middle of the height of the P.c. Board. see the attached picture drive.google.com/file/d/1XIdzOT_G4T7urQlVLfJ7RniK6yrpshTq/view?usp=sharing

[@marijnvangerven9233]

I have a MSZ-HR71VF unit. Were can i connect? Thank you!

[@todayhvac]

hi, the CN105 connector is located on the CONTROL P.C. BOARD. please see the attached file drive.google.com/file/d/1DtKCzpkYw13b0G9JwZpwG5zB7fnVkB25/view?usp=sharing

[@itayran981]

the replay below is for a question from: James Crowe HI, thank you for this! We have the PLA-SM.EA indoor unit and the MAC-567IF-E WiFi module. Unfortunately I don't see a CN105. We do have a CN41 connector that would physically fit and is labelled 'HA TERMINAL-A'. Might this be compatible? Thanks!

[@attilap9469]

Hi! I have a MSZ-SF50VE2. Can you tell me which wireless adapters are compatible as I received a MAC-577IF2-E and it has a smaller cn105 connection cable end. Thanks for you answer in advance!

[@todayhvac]

Hi, can you please send we the picture of the connector to my email: [e-mail]

[@todayhvac]

Dear Attila Thank you very much for the cooperation. I hope I understood you correctly: the official Mitsubishi Electric Wi-Fi Interface that can connect to your MSZ-SF50VE2 are: MAC-557IF-E (As of 2014) MAC-567IF-E (As of 2017) MAC-587IF-E (As of 2021) Best regards Itay

[@attilap9469]

@@todayhvac Thanks for your reply! Helped me a lot! Greetings from Hungary! ;-)

[@miquelalegret9247]

Hello, thank you for this video. My machine does not have the CN105 port. I have a FDURA501 as indoor machine and don’t see this port… can you please help me?

[@itayran981]

hi, the CN105 connector is at Mitsubishi Electric indoor unit. your model is Mitsubishi heavy indoor unit(It's a different company with different air conditioners)

[@iansalgado8710]

is there a module to allow you to connect the aircond unit to internet by ethernet cable ? (not wireless but wired)

[@itayran981]

System controller AE-200 has ethernet connection

[@todayhvac]

Announcement 17/04 : drive.google.com/file/d/1XSiHeP3wfpBQgyHzS01UwiQYECIicfBA/view?usp=sharing

[@francescopastone9449]

Any chance to connect one of these wi-fi module to MSZ-CGE25VA unit? thanks

[@todayhvac]

In my opinion it can be connected. Although I didn't find the MSZ-CGE SERVICE MANUAL it can be connect for the following reasoons: 1. the MAC-587 is offial suitable with the MSZ-GE series, i looked at the parts list and it is looks similar to the GE seires. 2. it is exists at the Compatibility List of KNX. in order to reach the CN105 of the GE25-50(And I suppose also of the CGE) The front panel needs to be removed, open the cover of the Indoor electronic control P.C. board and you will see the CN105 red connector in front of you.

[@francescopastone9449]

@@todayhvac thanks for your kind&fast reply. I've already opened the CGE chassis and found the CN105 red connector (5 pins). And that's a good new. I'm just concerned about the right model, the actual MAC-587IF-E or maybe the previous MAC-567IF-E? I've found a compatiblity list with CGE and MAC-567. I hope even MAC-587 will do the job. Tomorrow I will testing a brand new MAC-587. In case of fail I will change my mind, return back the 587 and pick up the old 567.

[@todayhvac]

I was happy to help, the difference between the 567 and 587 is minor (visibility and country of manufacture). All indoor units that work with the 567 should also work with the 587 in my opinion, good luck to you

[@francescopastone9449]

@@todayhvac I just want you to know I checked the model 587 and I confirm, it is perfectly and nicely working on MelCloud app. Thanks again man, see ya

[@stanislavnaydenov9244]

Great info. I am searching for the CN105 on my SEZ-KD50VAQ, but I am not able to find it in the manuals (probably because it is an older model). After connecting the wireless interface, the wired controller (PAR-21MAA) will also be active - did I get it right?

[@todayhvac]

please see the attached picture with the SEZ-KD50VAQ CN105 red connector. the PAR-21MAA will be active also drive.google.com/file/d/1C_B670NYw3m2oWXtwglhlmAzyB-V4-9T/view?usp=sharing

[@stanislavnaydenov9244]

@@todayhvac I have managed to order the interface and even to connect it to the system - it works without any issues! The number of the connector (cn105) was written on the plate as well. Thank you for your assistance!!

[@itayran981]

I'm glad you made it, have a good day

[@mtnezsotodosos]

Hi, I have a pead-sm71ja2 interior unit. Looking to the unit instructions, it says to connect remote Wi-Fi controller to a connector CN90, with 9 pins.. I understand then the controller MAC-5871IF is not compatible right? Any possible connection? Or What is the compatible wifi controller I should buy? Thanks

[@todayhvac]

Hi, the PEAD-SM71JA2 has a CN105 connector(red). as far as i know-the MAC-587IF-E is compatible with this indoor unit(i.e. please see the attached wiring diagram and the Indoor controller board). the CN90 is for Signal Receiving Unit PAR-SA9CA-E. drive.google.com/file/d/1cC5-ZE27RiZQpb6_nEBIzCu-4UNRKaVZ/view?usp=sharing

[@PetrovNicolae]

Hi, what is main difference between MAC-567IF-E or MAC-587IF-E, and wich of them can I buy for my Mitsubishi MLZ-KP35vf

[@todayhvac]

The differences between them are minor. The MAC-587IF-E is a newer model But their function is the same. The height and width of the 587 are smaller by a few millimeters, their visibility is a little different And their country of manufacture is different . both of them will fit to the MLZ-KP35VF, The 567 may no longer be available because its production may have been discontinued

[@brunopatricio2967]

Hi, great video! I have several MSZ-SF42VE2 units that i need to integrate via cloud. I've opened one, but can't find the CN105. Is there any? Thanks!

[@todayhvac]

hi, basically all the MSZ series has a CN105 connector. please send me an email to [e-mail] and i will do my best to send you a picture of the location

[@rke159]

Is there a difference between the mac-587if and mac-587if-e? I see both names online but am unsure if it are 2 different models and if so which one is the newest/better one? I have a erst30d-vm2ed. Thank you!

[@todayhvac]

hi, the correct name of the Wi-Fi INTERFACE is mac-587if-e And I don't know about the other model(the suffix "e" means: For europe). i.e. It could be that the person who wrote mac-587if forgot to write the letter "e" at the end. Could you please share with us the link you saw on the internet?

[@AndreyAvdeev_hypnosis]

Good video. But I have difficulties with connection. I think that module don't want to connect to my router

[@itayran981]

1. do you know the name of your indoor unit? 2. what is the name of the wi-fi interface?

[@AndreyAvdeev_hypnosis]

@@itayran981 indoor unit is Lossnay. Wifi is 587. Someone said that i need to update firmware of ERV

[@todayhvac]

hi Andrey. you can send me an email with the picture of your Lossnay model and i will ask the manufacturer if it can be connected via the MAC-587IF-E. i.e. it can take few days to reacive an answer form them.

[@AndreyAvdeev_hypnosis]

@@todayhvac ok. I'll make photos tomorrow

[@AndreyAvdeev_hypnosis]

@@todayhvac it will be great, because our local Ukrainian suppliers of ME don't have answers)))

[@tedlabete73]

Hello I have MITSUBISHI ELECTRIC MAC-567IF-E Wi-Fi Card with a connector with only 4 wire and need to connect it on a 5 wire cnn I would need MITSUBISHI ELECTRIC MAC-587IF-E Wi-Fi but some people told me we can only buy the small red stuff connector with 5 wire and only put 4 wire in it but I do not know where to buy it and what is exactly the reference or name of this stuff. Any idea please?

[@itayran981]

hi, i am encountering this 4 wire issue for the first time from you question. can you please: A. send we a picture of your 4 wire mac-567if-e (as meny pictures as you can)? Did it come like this in the original box? B. tell me what is exactly the model name of the indoor unit(that you want to connect it to the MAC-567if-E). C.Your country of origin. D. the MAC-567 and 587 are almost identical(they have minor dimensions changs and a different country of manufacture, however their functionality are the same)

[@MegaShortcuts]

My wifi unit suddenly lost connection yesterday after trouble free operation for over 2 years. No matter how many methods I try it just will not reconnect to my wifi. Is it possible for it to simply break and require replacement?

[@todayhvac]

can you see what are the LEDs pattern? page 7 at the attached link drive.google.com/file/d/1l4vYDzHRTr-jXocEs4Oih4Iym6ASvGAZ/view?usp=sharing

[@MegaShortcuts]

@@todayhvac I can't remember now. So many different patterns but always involving the Orange (ERR) LED. Been trying all day and frankly so tired and frustrated now that I've given up.

[@itayran981]

if the NET the UNIT and the ERR are blinking mean that: Connection to MELCloud failed, and Connection to indoor unit established. Since you tell me you've tried everything and nothing works-Try talking to your installer who will contact the company

[@itayran981]

You did everything right, it's not a problem for you, there is probably a problem with Melcloud's servers

[@MegaShortcuts]

@@itayran981 thank you. All fixed now.👍

[@АлексейВладимиров-в8ш]

Thnx!

[@jeanfrancoisfourquet8461]

great video

[@s3rgiosan]

I have two questions and would greatly appreciate it if someone could answer them: 1) I have two MFZ-KT35VE AC units. Is this module compatible with them? 2) With this module, can I control my AC units through the Smart Life app? Thanks

[@todayhvac]

1: you can connect the MAC-587IF-E to MFZ-KT35VG (i.e. i didn't find the exact model that you have mensioned will the suffix VE) 2: i will check

[@s3rgiosan]

@@todayhvac thank you very much

[@I_am_Matei]

Hello . Please some help. I conect the phone to the mitsubishi wifi, after that i canot conect to the 198.11... because i dont have net, the phone is on mitsubishi wifi. Should i disconect the mitsubishi wifi and then conect to 198.11...?

[@todayhvac]

Hi, i hope i understand you correctly-please try to type 192.168.11.1/network. (today you can't get access to the wi-fi configuration screen if you type 198.11....., please open the movie Description )

[@toomuchinfo-uz9ic]

great, thanks. Everything took me 1hr without reading any instructions, I used this and the other video on how to open and find the connector (kzbin.info/www/bejne/qJ68aqN7rrZlb7Msi=omzFI0fggA3fzRrd) - msz-ap type

[@todayhvac]

I'm glad to hear that the video helped you. I wish you a day full of interesting installations 👍.

[@lisbonrentals7361]

amazing video. I did encounter an issue. i have over 40 interfaces mac-567. now ive installed a new machine with the 587 and these cant connec to the melcloud server. its strange that its only the 587 and 577. did anyone had this issue as well? Kind Regards

[@todayhvac]

if you can't get to the "wireless configuration screen" -> In my opinion, the software may have been updated or upgraded over the network , so it is necessary to type in the browser 192.168.11.1/network If you have seen another phenomenon, feel free to share it and we will try to help

[@todayhvac]

192.168.11.1/network

[@lisbonrentals7361]

@@todayhvac Thank you for the reply. It connects to my wifi and its respoding. The error states that it cant connec to the melcloud Server. Its strange because its only these MAC models that does this .

[@itayran981]

Honestly, we haven't heard about it recently. We sometimes encounter a software update after installation (we once encountered that the error light flashed and it was resolved after a few days)

[@itayran981]

There might be something with the servers, try contacting the distributor.

[@חגיתרן]

Great and helpfull information!

[@todayhvac]

great

[@massimobandinelli]

Hi, I have a mfz-kt35vg. I can only find the cn104 connector, but I don't see the cn105. Can you help me?

[@todayhvac]

hi, the CN105 connector is very close to the CN104. i think that it is in RED. you can use glasses becuse the writing is very small, please see the attached file drive.google.com/file/d/1QhgNtgK5NY2c6YXFzWgTQfF2G7R2lCFL/view?usp=share_link

[@tsvend9725]

Hello Im am able to Connect to the a/c-wifinetwork But i can not continue to the “wireless configuration screen” Why..? Im am using a iphone 😊 I hope you can help👍 /T

[@todayhvac]

Dear t svent Sorry for the late response. I understand your situation, really. Unfortunately, I don't have a good answer to give you except that: 1. The action you performed is correct, you did nothing wrong. I don't know what caused this problem 3. Please contact your supplier, he should give you answers and a solution 4. If I know of a solution, I will update you By the way if I may ask, what is your country of origin?

[@todayhvac]

in order to see the "wireless configuration screen" please type in your browzer: " 192.168.11.1/network" (i.e. with an emphasis on network")

[@todayhvac]

Write in the browser "192.168.11.1/network"

[@todayhvac]

192.168.11.1/network

[@tsvend9725]

Thanks 👍☺️ But I do not get the “wireless configuration screen”😢 I am from Scandinavia👍

[@hansdegeytere]

The connectors on the 567 and 587 units are different I think : the 567 has a bigger connector, while the 587 has a smaller one. My CN105 port is quite large (about 1 cm long), so I don;t think the small 587 unit will plug in there ?

[@todayhvac]

The connector that connecet to the CN105 is exactly the same for both MAC-567 a MAC-587

[@hansdegeytere]

@@todayhvac I doubt that : on the 577 the connector is much smaller than on the 567. I have 2 units : one has a 567, other has 577. The devices look the same, but connectors are different.

[@todayhvac]

the connectors of the 567 & 587 are exactly the same. unfortunatly i don't know the 577, however-if it is connect to the CN105 then it must feet. you can send me the pictures to [e-mail] if you want me to look at it.