How to connect your Roland TR8-S to Ableton and Record!

[@iamciscoo]

Hi everyone, Hope you are all well, apologies for not being able to get back to everyone individually! however I have created a new video to help you! click on this link to view it kzbin.info/www/bejne/Y56aiaRqfbijf7M THANK YOU ALL! also if you wouldn't mind hitting that subscribe button. it would help me out a lot :)

[@cathoderaymission5545]

Just spent two hours trying to get the TR8s to pop up on the audio input device dropdown. Just realised I'd downloaded the TR8 driver, not the TR8s driver. Don't make the same mistake as me everybody. BTW this is a super helpful video, much thanks.

[@iamciscoo]

Thank you Cathode, I really appreciate your feedback 🤙🏽

[@tripdontsleep]

I have the same problem!! I can’t see the TR8s on the audio input device! Do I need to download a driver for the TR8s for that?

[@levinkoper9185]

Thank you man, i think i am to stupid to Download 😂😂

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@richardgossmann]

3 years later and still a super helpful video, thanks bruv

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@vickycognaux8836]

Hopefully there are people very generous like you who take time to explain things very clearly. Thanks for your very useful video !

[@iamciscoo]

Thank you I really appreciate the feedback

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@BloodCastleMusic]

What about when using the effects on the tr8s do those affects appear on the recording in ableton?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@iStoneHoldem]

Do I have to run the TR8-S as the soundcard? Can't seem to figure out how to run this setup on my Focusrite scarlet 2nd gen

[@DjLoK]

Yes I think you have to use it as the soundcard. I saw someone explaining this earlier in a comment on a different video. If you connect your MIX output 1/2 from the TRS into your Focusrite you will be able to hear everything coming out of your monitors

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@oliverwilton5389]

Can this be saved as a temple for next tim the TR8s is plugged in?

[@iamciscoo]

Yes definitely 👍🏼

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@sonnyhancock]

Good direct video. What's the midi sync set up?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@DjLoK]

Thanks for this. So you end up with two groups? Thats the only part im confused about. Any help appreciated, thanks

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@SebastianBrodtkorb]

Great video - thank you! But how do I get the FX on eac chanel and on the master to come through in Ableton?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@palantireye11]

Hey. With this setup you can't use any other audio interface simultaneously, right? What If I want to record another external instrument on the go? Thanks

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@diegoolea4332]

Hi Ciscoo, thanks for the video. is perfect. One question, why you don´t record directly why out duplicating the group ? Thanks

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@annunmusic]

Hello there, the way i have my preferences in ableton is I could only choose the drive, which would be ASIO in my case, and the audio device, not split in to input and output devices. So i can do all this routing but the audio device would be the TR8S in order for me to set the Ext In for each channel, were it's normally set to 'Focusrite USB AUDIO'm so at the end I cant hear any signal i only see it coming through in the channels.. Even if i have the usb audio set to INDiv in my TR8S.. I hope I explained this is in a clear way and any help would be much appreciated now, thanks :) *TR8S plugged in with USB cable to the PC, audio plugged into one of my soundcard's inputs running through the MIX OUT L/MONO on my TR8S

[@sigaahbeats5781]

i have the same problem on windows))

[@pauluap87]

i have same problem andd i think maybe it would be a problem with the interace. I have a Motu track 16 interface wich to me looks proesional and then this problem. I try like everything about, for more than a year now and still could listen live. I´m looking for an apollo twin now and maybe i finally resolve and discover what the hack happens. If not, maybe a Mac will be the solution

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@awakening.alchemy]

love this! thank you! finally after having the TR8s for 2 years im finally learning how to actually record on ableton with it. my question tho how can the volume be increased because the sound that comes out of it is sooooo quiet. plugins added on channels no doubt. do you have a record midi information video?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@FelixPatek]

thx mate. so u can u can use the tr8s with ableton and still use ure main soundcard in live to make music? back then with the tr8 it was not possible right?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@davidsebastian9760]

Can you record also the effects from the TR8S via USB ? or only the sequence ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@jonny1716]

Hey. Thanks for the great video. Really helpful! I've followed right to the last step but I can only get 1 track at a time to arm. Any ideas? When I arm the 1 below the las one un-arm itself.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@jorgevasconcelosmadetomove]

can the knobs and faders of the tr8s be mapped on ableton?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@andybtek8599]

Hi, I have the normal tr8 no s. and ableton live 12. Is it the same procedure or are there different settings? Thanks.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@juanpedroquintanarobles6703]

Super useful How can I do to put the master fx on? It only works when I jam without daw. Thanks

[@SebastianBrodtkorb]

I gort the same problem. I dont think thats possible

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Bouzouk44]

The only video that help me to do it right ! Thanks

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@charliethomas844]

Really frustrating for live jams not being able to then monitor in your other hardware, such as synths, when setting the audio driver to TR8s, is there a way around this?

[@DonVatcher]

Create an Aggregate Device in Audio MIDI Setup (Mac) that combines your interface and the TR8S. Then all of the tracks become available.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Petey_Petey]

Will it output midi notes to a daw though? not just the audio files?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@R1PPA-C]

​@@iamciscooappreciated!

[@scurturobert9306]

bro. i can t fin a way to have more inputs and outputs like you. can someone explain me how i can add more for each track ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@amalgamation4195]

when I plug in my tr8s into my computer via usb it shows up in apple settings but I can't select it as an input in abelton, does anyone know how to fix this?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@slickmick4494]

will this work with the mc707 as well as just got mine today

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@damelos4039]

Well done. I needed this for my TR8-S purchase. I needed to know I could get this as audio into Ableton.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@chrischervin9329]

Thanks! When you do this technique do you get just the dry signal from each drum track? Do you also get their tune, decay, and CTRL changes? And what about the Reverb, Delay, and Master FX: will those only come through the Master channel?

[@iamciscoo]

Hi Chris, yes you should you :)

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@JKSONmusic]

Thanks Cisco, i wondering if you can do that also without using the tr8s as an interface or is the only way? couse in the studio i have an interface and i have all the gear conected to a mixer and the mixer to the interface. looking foward to read you, thanks!

[@iamciscoo]

I am not sure I understand what you mean, but I am more than happy to try help you. Drop me a message on instagram on i_am_cisco and We can connect on there and we can do a video call and I will do my best to help you?

[@txgxlx8712]

hi both, I _think_ I have the same question! I'd like to try out connecting the TR8S to my Focusrite, then from my Focusrite to my laptop (instead of directly from the TR8S to my laptop). Was wondering if there was any quick/easy way to do this + if you had any developments?

[@iamciscoo]

@@txgxlx8712 on your TR8s you will have a mix out (mono) you can use a TRS cable from that into your Focusrite input

[@unlockingthemasculine]

I’m having the same issue very confusing

[@DonVatcher]

I created an Aggregate Device in Audio MIDI setup that combines my Focusrite and the TR8S. Now all the drum tracks and synths can be recorded together.

[@lukasmol1978]

Hello My man, thanks for the vid! But I'm running into a problem over here, the audio of my TR8 is peaking at -14, at most channels. I followed all your steps, my DAW is Ableton and I got everything up to date!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@ecilo307]

Hello I got trouble, my tr8s doesnt show up on preference ? do you know whats going on? all plug pretty well

[@DjLoK]

Make sure you have installed the driver on your computer

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@MrFlipca]

If you do it tht way you won't have the effects (reverb and delay) on the individual tracks. How do you solve this problem?

[@fredrikbtt3430]

i have the same problem

[@danceablesolutions]

Only way is by recording the master out and muting every channel other than the ne you want. eg, I record all the channels individually but if i want a delay or reverb on the snare I then record the master mix with all the channels but the snare turned down. Pain in the arse. I loathe my TR-8s, never buying Roland again

[@deyanfont]

Forget it, there’s better fx plugins out there than the Roland ones on unit IMO

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@mrbass093]

Good video! But I have one question… how could fix latency?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@frank_mm]

Just one question, the overall mix of all tracks, sounds in mono. Quite different as if you record the stereo out from TR8S

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@markszili2577]

I just bought one of these on the weekend and the issue I've found with brining in each instrument is that each one is only mono, where as the MIX out will honour Pans and reverbs of each instrument in stereo, this is a massive over sight on Rolands behalf. If anyone knows of a workaround please reply.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@alexp7076]

hey, its not showing tr8s in preferences, instead it says IN1-2, all the way to 11. i've downloaded the driver as well, and i've selected individual in the tr8s under utility. any thoughts?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@SmokysRides]

This only seems to work if the TR8S is the only thing you have connected to your computer, since you select the TR8S as your main audio device in Ableton preferences. Is it possible to accomplish this setup if the TR8S is connected to a USB device like the Traktor A10, along with other devices?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@luigiv7383]

thank you for your tutorial, it works for me but there is a problem when I press the instpad of the tr-8s while being in ableton the sound of the insturments is doubled !! you do not have the solution of this problem ????

[@iamciscoo]

Hey, double check your monitor channel. Make sure you have one that is coming in and the other one is on automatic

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@knowingwhatthebuttondoes3432]

I've followed these steps exactly but I'm getting terrible latency where the video seems to have none at all. Can anyone suggest what settings I have to change? I think it's something to do with monitoring, but everything I play around with stops the audio coming through my effects/to the master.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@MrPhillee1982]

Why do you duplicate the the TR8S groups at the end?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@simonpulga4933]

you can use the tr 8 s by means of usb but does not need an audio interface ????

[@kalibhakta]

Correct. The Tr-8S itself is a class compliant audio interface. You can plug it right in and control MIDI or record audio as you wish.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@sydfalls8083]

Hi, i'm having a problem pressing the red icon for multiple audio tracks. Do you / anyone know how to fix that? thanks for this vid btw its been the most helpful.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@808threadripper6]

Hey 👋love the video but a little confused, so you have to duplicate the tracks in order to get sounds ?

[@iamciscoo]

you don't have too, however it makes it easier to see it (I found it easier)

[@808threadripper6]

@@iamciscoo I am trying to follow along so on the left side of the screen I should have 2 tr8s groups ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@july-music]

Cela fonctionne aussi avec Roland TR-6S? Merci super vidéo ;)

[@Digital_K]

Je me pose la même question ;)

[@FreddyVortex]

Sans probleme, juste config la TR6s Utility, USB > individuel

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@kaiserwaldon]

This was ace thanks mate!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@rodrigoFabréGutierrez]

Muchísimas gracias !! que viva la música y la tr8s! saludos y abrazos desde Chile

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@alanra9531]

when i record with the roland tr8s im only getting a dry signal no reverb or delay or master fx in my channels.. how can i fix this? thanks

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Flashback_Jack]

What's the purpose of duplicating the TR8-S setup and setting all their channels to "auto"?

[@rik-keymusic160]

Yes, i have the same question 😅…

[@juanizquierdo3706]

I'm not sure, but if there's any kind of delay, you might use the "auto track" to record and the "in track" just for monitoring. just guessing haha

[@zaygraymusic]

Need this answer

[@whurdoondees]

One is for receiving midi from the TR8-S and the other is for receiving audio from the TR8-S

[@350zgr33n]

Auto only has a signal when the track is armed where as input allows continuous signal input

[@louisdamzo3453]

Hi, thanks for the video but how do you get rid of the huge latency?

[@iamciscoo]

Try recording on off and use auto for listening 😊

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@fredrikbtt3430]

Nice vid man. But i have an issue, i cant get any effects like delays, reverbs and some others.. I can hear them but when recording all the sounds go raw. Do you know why this happens?

[@iamciscoo]

Hi Fredrik, I will have a look into it and let you know

[@danceablesolutions]

Only master out on TR has FX, individual channels don't, I despise the bloody thing. Never got it syncing with Ableton so going to CEX with the fucker now

[@fredrikbtt3430]

@@iamciscoo Thanks man but no problem, i discovered the issue. I dont use an interface, only a USB cable so i cant record any effects. Only the tune, decay and a lil more. With an interface i can record everything, i tested it out

[@iamciscoo]

@@fredrikbtt3430 I have also got an interface as well, mine works

[@irieearnest9138]

@@iamciscoo What type of interface do you use?

[@mauriciothomsen4297]

Thanks a million for this video. That's exactly what I needed.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Mister.Cricket]

Hey, man, thanks a lot for the video; was very helpful. I got Ableton to record all TR-8S instruments separately. However, when I play back what I've recorded the volume is much lower than what I initially hear when I'm recording. The wave forms that I see are also much less defined than yours are. Is there a way to fix this? I feel I may just be overlooking something.

[@WVandellHarris]

Starting from your interface, trouble shoot from there. Check the volume on your interface.

[@ManooTk]

you may have been recording with the monitoring option turned on causing a double signal. I do my clips in only 1 channel and 1 cut turning on every single master volume knob of each sample individualy with a 4 step kick pattern at the begin and the end so i can corrige the lattency using the warping function and then copy-paste for the arrangement

[@Mister.Cricket]

@@ManooTk Thanks!!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@frankzbruckmann5019]

i can do it without audio interface only tr8s and computer?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Berus7777]

I have this working, thanks to this great video, but I have a (newbie) question: What is the purpose of duplicating the group? I know this is probably obvious, but... as I said, newbie here. Thanks again!

[@holteenderrob]

yeah I'd like to know this too

[@iamciscoo]

When you duplicate it and record you won’t get lag or delay, it will be quantised on the grid and it will also not give you feedback

[@calesfer]

Hi! @@iamciscoo Sorry to be noob, but I didn't understand your explanation :/ Why would you get lag or loose quantification if you didn't duplicate? And what do you mean by feedback?

[@PabloRodriguezwhyCharlieWhy]

@@iamciscoo I set p exactly as you explain, everything is on sync etc, but why when I record the sound look record are not that loud?

[@iamciscoo]

@@PabloRodriguezwhyCharlieWhy stick a compressor on it and adjust to preference

[@albertcalalay9222]

Are you getting any latency when you record when you set it up this way? Saw another video where someone advises to have the monitor set to off to get less latency, one group on auto and the other on off?!

[@albertcalalay9222]

Great video by the way quick and easy!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@JL-dk8se]

i get no sound? the meters are going on ableton channels but no sound coming through on my headphones?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@fantomfeelings702]

does this apply to the tr8 as well?

[@iamciscoo]

It should be pretty much the same thing yes

[@fantomfeelings702]

@@iamciscoo Thanks alot man

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@liebe3019]

Tried this without an interface but no sound comes out.. any leads?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@888roscoe]

Thank you so much, best video on utube on the subject. THANKS

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@goncaloteixeira7885]

My Ableton don't recognise my tr-8 . I connected thru USB but still finding problems to connect . what should ido ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@armandogamborino-mt9qr]

What if in the input channels just shows 1/2 pls help me i can’t fix it

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

Hi Thank you for your video , i understand you opened 8 different audio channel for each elements of the tr8s. So what about the midi? I want to see the midi notes of each element, is it possible? When we connect to tr8s to ableton with usb , how it is possible to record rhytm both midi notes & audio?? Thanks

[@Djmarcuslott]

Maybe open a separate midi channel. Receive midi from TR8S...

[@DJeMo]

That what I thought he was doing when he duplicated them, eg one for audio feed and a group for midi, still wondering why he duplicated them, wouldn't that be 2 sources of audio from both groups, making it louder in general?

[@TimGregory]

@@DJeMo duplicated so that the second set can record without monitoring turned on. This means the recording is bang on with no latency

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Digital_K]

Thx for that ;) Is this work the same way with the TR-6S ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Digital_K]

@@iamciscoo Thx a lot !!!!!!!!!!!

[@cesarq6011]

Thanks for the vid man! Worked like a charm! My interface is an apollo twinx & i'm trying to record my moog in the project you showed me. On Ableton, when i switch the Audio Input Device from "Tr-8s" to "ApolloTwin" to record the Moog, it emits a high screeching sound even if my nothing is plugged in. Does something have to be done before i switch it the Audio Input Device?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@danceablesolutions]

So many people have asked why you duplicated the groups. I too would love to know why. Any chance of answering us?

[@iamciscoo]

Sorry I hadn’t been on KZbin for a while, the reason I duplicate them is because I have found that there is less lag when recording which means the recording is more synced / on tempo

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@elenimariamoon9004]

So clear! Keep on with the nice work! Thank you!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@neveoney7865]

Hi can i ask you here about timing TR8S and Ableton?

[@iamciscoo]

Hey Neveo, I have noticed that when you clip audio off the audio timing is better

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@comedemahieu1517]

While recording your sounds from the tr8s, are you using your tr9s as an interface or do you use a different audio interface`, I struggle to assign the tr8 to an audio input while the audio output is my soundcard (audio interface) any tip for this?

[@gillesd855]

if you're a mac user you can go to audio/midi config & group your interface together with the tr8s as 1 audio interface

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@alexander1974blatt]

thank you so much i have not yet a id how it all workd but i made the connection and made it record so thanks..

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@riccello]

I own a TR-8S and I also use Ableton. TR-8S is a nice machine, but its awkward to use. Its sound library is a bit dated, and it has limited capabilities compared to Ableton. My question is, why would you want to record anything from TR-8S? I use it as a MIDI controller for launching clips and controlling effects, which it is great for since you get up to 11 channels with dedicated controls.

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@De_Bars_Gullible_Travels]

Superb video… So simple and EVEN I could follow(I’m a newbie!!) I’ve another favour/question to ask if you…. I have a td3 and td3 mo that I run into the Ext. In and they are now 2 mono channels… I use the tr8s as the audio interface,BUT I can’t get the 2 td3’s separated into 2 separate channels to record them separately…any ideas?? I’m probably not making much sense am I?? 😆😆😆

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@jimbeasley33]

I can't get more than one instrument to arm for recording at once. What did I do wrong? Really good video btw. Was very helpful.

[@jimbeasley33]

Not sure what happened but when I looked up at ableton, after leaving my initial comment...found all the instruments armed on both groups. Should both groups be armed for recording or just one of them?

[@micklabree635]

@@jimbeasley33 i had the same problem, i found the solution, just hold command or ctrl and click all off them :)

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@raquellashanti5074]

You’re amazing thank you

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@tokydac]

i follow these steps and the sound isn’t coming through into ableton. any help

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@vinims5]

Thanks for the video mate

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@brothersofsisters9274]

Helped a lot, Thanks!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@slimyzombie]

Thanks so much bro! Bout to hook this up :)

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@goztbreaka6506]

How can I connect to acid pro ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@rik-keymusic160]

In wondering why you duplicate the group?🤔

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@beijobae]

what's the purpose of duplicate?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@ChefZoneAU]

Cheers mate great tutorial for us newbies 5*****

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@LuciousWeatherby]

Very simple thank you

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@Lizardforce]

Perfect thanks bro ❤

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@3ric908]

Damn I do exactly the same than you with my TR6S and nothing ; amazing it's so complicated to install (hope my tr6s can also have multi-channel, i not I re-sell it immediatly). Btw thank you very much for doing this (Roland uncapable to make a basic video to for setting up..),

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@richardjames111]

I've 2 questions... What is the reason behind duplicating the group?? Do you know what settings I need to have to be able to use my Push 2 to play/sequence the Tr8s? Thanks

[@iamciscoo]

Hey ric, I was struggling with the same problem check this video out kzbin.info/www/bejne/jWjRaJhmaqumhZY it really helped me!

[@neveoney7865]

Hi thanks great video! How do you record the drums? Per audio via mix pot or usb midi - per usb midi everything is a bit quiet? Tell me about timing - do you have to use usb midi and sync or just enter the same bpm in Ableton and TR8S ?

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

this works only if you have no others synths

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@MutateRecords]

Doesnt seem to record fx /reverb shuffles etc

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@TECHNOBKT]

Top. Thanks 👍🍀👌

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@ghislainexatap1154]

Thk so much ❤

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@petercarter1107]

Top video!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@djmonski843]

thanks mate

[@wolfganglahmann1933]

Thanks a lot!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@inmovement.97]

I did everything just like you did, and I have sound... But when i pass the sound trough Ableton it changed the sound.. it's like I have two basses with 10ms of difference or some kinda of delay.. I don't know.. And this happens to all Audio tracks.. (Solved, the problem was the Buffer size) I will leave the comment just in case someone has the same problem

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@aquiyahorameditacion]

excelente !!!!!!!!!!!!!!!!!!!!

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@rln7385]

Record a video like this for Logic Pro

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@TheBenpg]

WHY CANT I LISTEN TO MY RECORDINGS?

[@jaredbyrd1973]

Turn back to auto instead of in when you have ur recording

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@gillesd855]

maybe it''s better to record on off.. & use in or auto for listening

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@bandtruemine]

Cheers~~

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@BleibRealBro]

bist n guter

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video

[@pinkblauMusic]

danke =)

[@iamciscoo]

kzbin.info/www/bejne/Y56aiaRqfbijf7M Updated video