How to Convert 13A To 15A Socket & Plug | Replace UK 3 Pin 13 Amp to 15 Amp Socket Plug

[@mikethompson7296]

The cable in the patress box looks like 1mm or 1.5mm flex which is absolutely not enough for a 15a circuit.

[@TonaziTube]

It was 14 Gauge size

[@madamhousewife4713]

Hi, mine iron steam press using 15A plug top. Can I replace 13A wall socket to 15A directly? Can existing cable hold the load?

[@TonaziTube]

You need to check wire pin gauge first.If gauge over 14 size,there should not be a problem to change to 15A.

[@reen964]

Hi there … Thank you for the tutorial! Clear step by step. Question : If I change from 13AMP to 15AMP, will it not overload the fuse box ? Just 1 socket/plug to change for oven use

[@TonaziTube]

Hi friend!Thank for watching.If your main fuse box use over 15Amp,it should be not a problem to change.

[@reen964]

@@TonaziTube How do I check the max load of my fuse box ? Is it stated anywhere on the box ?

[@TonaziTube]

You need to check the MCB specification in the box.Believe have a few pieces in the fuse box.Need to find which MCB connect to the socket supply place(for oven use). MCB Current and Curve Rating: , Example if mentioned C20 . The numeral part indicates rating of MCB in Ampere. In the given example it is 20A. MCB rating is very important and be very precise about it.

[@reen964]

@@TonaziTube thank you so so much for your replies. Appreciate your help 💜

[@TonaziTube]

Welcome 🤗! Thanks for watching and pls support by subscribing this channel

[@toqq3395]

Hi, if my current wall socket is a round 3 pin 15A. Will it be okay if I change the socket to rectangle 3 pin 13A to match my fridge?

[@TonaziTube]

No problem if use 13A from 15A designated.

[@Rivenworld]

You need to make sure the cable rating is right before putting a 15amp socket in place of a 13 amp one.

[@TonaziTube]

14 AWG copper wire is the most common choice for a 15-Amp circuit. 14 AWG copper wire is ranked 20 Amps at 75°C. If you choose to use aluminum wire, the correct size for a 15 Amp breaker is 12 AWG. However, copper cables are a better choice for 15 Amp breakers due to safety and efficiency concerns

[@nhstudio508]

Thanks for the guidance

[@TonaziTube]

Welcome

[@TheDingfish]

Hi, thanks for tutorial. How about if my wall outlet is already 15amp 3 round pin, I need to use power tools with 13amp plug, I don't want to change the plug head to 15amp. Can I just use an adapter to plug in my 13amp items? They are around 1200-1500watt and will only use one at a time. Is it safe? The amperage use of the tool is lower than wall outlet should be ok right?

[@TonaziTube]

You’re most welcome and thanks for watching.For your cases,it should be no problem if using adapter for 13 Amp and only use one at a time.

[@TheDingfish]

@@TonaziTube thanks! If I want to test the power on the 15amp wall outlet can I also just use the test pen(same type as your video) in the live (bottom right)?

[@TonaziTube]

It was my pleasure! Pls be careful when handling with the electricity ⚡️.Beside test pen ,you may also measure the output voltage from wall outlet by using multimeter.

[@HM13.]

Can i use a Chinese brand10A water dispenser, change it to a UK plug 13A fused socket?

[@TonaziTube]

By assuming that the 13A plug you’re referring to is British, I’m guessing that the 10A connector is using 240V. In that case, yes, you could technically change the plug without any problems - just put a 10A fuse in the plug to be safe. A UK outlet was historically protected by a 13A fuse, which is why it is necessary to protect your appliance with the correct type of fuse at the plug. Of course, using electrical appliances in countries they’re not approved or certified in is another kettle of fish....

[@ezy2cook]

Thanks for the tutorial

[@TonaziTube]

Welcome Sir

[@jiaqinglim5084]

If I change to a 15A and socket plug, do I need to change the thickness of my extension wire to thicker wire??

[@TonaziTube]

You may check the wire thickness.If 2.5mm ,it can support until 22A.

[@one688easy]

@@TonaziTube may i how do know 2.5mm support till 22A ?

[@TonaziTube]

A 2.5mm cable is capable of supplying around 23-25 amps depending on the method of installation, so is fine, safe and compliant on a 20amp circuit breaker.

[@prithal.1068]

Hi , how can i change a 220v 10A china made oven plug to malaysia 250V 13A? Just change can ?

[@TonaziTube]

Hi! You can change it.Just replace the plug.

[@prithal.1068]

@@TonaziTube thanks for your reply but the difference in 10A and 13A Fuse doesn't matter ?

[@prithal.1068]

@@TonaziTube need to change the fuse?

[@one688easy]

my exisitng wiring on aircon is 15A type and using 15A socket n plug , but for some reason, can i change JUST the plug and socket to 13A type?

[@TonaziTube]

Need to check current (Ampere) requirement on your Aircond usage.If use more than 13Amp,not recommended to change.

[@dannydao1660]

Dude, have you insured sufficient fire insurance before you made such alteration?

[@TonaziTube]

Done

[@sadhanandss]

hey buddy where can i buy that 15amp UK wall socket

[@TonaziTube]

I'm buying at electrical supply shop.You may search Electrical or Hardware shop nearby at your country.

[@TonaziTube]

You may buy at online shop also. shp.ee/mxdddt6

[@sadhanandss]

Thanks buddy

[@TonaziTube]

Welcome Friend!

[@one688easy]

AIRCON must use 15A socket right?

[@TonaziTube]

Yes ! Recommend for 15A

[@celehsaf3619]

Can you replace a 13 A to 20 A in a plug?

[@TonaziTube]

Need to check wire or cable use type?Support to 20A or not.

[@celehsaf3619]

@@TonaziTube how can we chat one one one? I have so many questions

[@TonaziTube]

We can chat here,no problem

[@celehsaf3619]

My circuit breaker/ industrial socket is rated 32 A 220 volts. Can it power a 13 A 220 volts appliance or it it can burn?

[@TonaziTube]

The number “32” means that the Circuit breaker will handle up to 32 amps before tripping. The curve determines how long the circuit breaker will hold before tripping at various over-current levels. If using 13A 220V,it should be no problem.

[@user-bm5hf1ph4n]

this is terrifying

[@TonaziTube]

Sorry for an issue

[@user-bm5hf1ph4n]

@@TonaziTube you screwed down onto your cables insulation which is a main cause for fires at sockets you should remove some insulation and twist the wire until it will not twist anymore then tighten onto that exposed cable and you will have a safe socket though the other end of that wire may also need to be reinstalled

[@TonaziTube]

@user-bm5hf1ph4n Thanks for advise