How To Convert Car Alternator To Brushless Motor / No ECS With Mosfet Driver

How To Convert Car Alternator To Brushless Motor / No ECS With Mosfet Driver
👉PCB Drawing Program
Get a free trial of Altium Designer :
👉www.altium.com/yt/ZAFERYILDIZ
👉Subscribe to JLCPCB with the link below and get your discount discounts
👉jlcpcb.com/DTT
Click to subscribe 👉 bit.ly/3A75DDi 👈
Circuit Diagram ______:
drive.google.com/file/d/1XJRi...
A list of materials______:
3X IRF3205 bit.ly/3uTSBs1
6X 1N4007 bit.ly/3gMVjHG
3X 10K bit.ly/3Br7Yd1
1X 4,7 K bit.ly/3JwMn5D
1X 100K Pot bit.ly/3Jw6yke
----------------------------------------------------------------------------------------------------------------------------------
The soldering station I use
👉 bit.ly/3hjI5BY
👉 Coupon: BGfcd779
-----------------------------------------------------------------------------------------------------------------------------------------------
Some products you may like
xiaomi smartwatch: bit.ly/3EZlCEo
xiaomi mi box s: bit.ly/3EU3RpU
blitzwolf earbuds:bit.ly/3qPmkPp
xiaomi robot vacuum:bit.ly/3qJew1G
blitzWolf bw-wa4 wireless speaker:bit.ly/331XNhB
blitzHome smart air purifier:bit.ly/3zo0bvc
creality 3d:bit.ly/3sTpO5U
frsky transmitter: bit.ly/34aaGa0
frsky radio:bit.ly/3mUhi34
eachine drone:bit.ly/3EU6Bnc
eachine ev800d:bit.ly/3HOOOjh
yeelight: bit.ly/3zkZX8k
iflight:bit.ly/3zm29w8
chuwi:bit.ly/3mUkHP0
emax tinyhawk:bit.ly/3pRtHGP
dji fpv combo:bit.ly/331Oyyc
skyzone:bit.ly/3zBLuFj
bakeey: bit.ly/3EUHm45
ANBERNIC RG552: bit.ly/3HORSMj
New Lenovo QT81: bit.ly/3mTdvCS
-----------------------------------------------------------------------------------------------------------------------------------------------
You can get the product here.
👉bit.ly/3xWh4N3
👉Discount Coupon: ZY10
Manufacturer Company Website ( Kaiweets )
👉bit.ly/3GcG4Co
Thank you Altium Designer for sponsoring our video.
#Altium

[@eleuteriopinedoacosta3983]

Excelente zafra yildiz desde Colombia congratilaciones por tus aportes a estos circuitos prácticos y sencillos

[@marcbaflast7271]

C'est extraordinaire ce qu'on peut faire avec tous ces éléments qui sont d'une richesse inestimable. Ce n'est vraiment pas un secret. C'est que de plus en plus les gens vont s'intéresser à ça par la force des choses. Surtout pour ceux qui ont déjà une bonne base dans l'électronique ou l'électricité soit automobile ou industriel etc...il faut aimer vraiment ça et être derrière le plus souvent possible. Se documenter surtout. Se faire aider pa ceux qui ont une plus grande connaissance sur la question. Ce qui fait qu'on rentre de plus en plus dans un monde de l'intelligence artificiel si j'ose dire au présent et surtout pour le futur.

[@MrProvocer]

Awesome project , as many others. A but of an explanation of what each of the elements does would be very useful for beginners. Also, what’s your soldering iron model? It’s awesome!!! I wanna buy it!

[@donalipatechnology]

Gracias @ZAFER YILDIZ por compartir tus conocimientos ¿alguien sabe como se llama el circuito, documentacion o informacion de su funcionamiento? me gustaria estudiarlo mas a fondo, gracias

[@raydreamer7566]

I really like what you have done and how you teach how to do the conversion. Can you show how to do the same conversion with a much large alternator for a small motorcycle install ? I have seen very large alternators of big trucks and even 36 volt from forklift trucks...

[@vancehines562]

Excellent circuit! Suitable for many applications. + wire is connected to center of star or y . He is using N channel Mosfets as low side switches, making it unipolar. It would seem diodes /resistors are directing back emf from adjacent phase for gate drive.

[@charliesimpleton7157]

True !!! This video will be very useful in pumping water using only DC current which is way cheaper than being connected to the grid. I can only imagine its extensive applications.

[@ArshaansEdits]

Can this work in a Delta configuration?

[@imnotbeluga007]

@@ArshaansEdits Nope, four wire Y (Wye) connection only with a common connection as well.

[@jeremyatutube]

do you know of a circuit that does work on delta? cheers@@imnotbeluga007

[@user-dq8fj3cp2e]

I'm looking for literature on under standing electrical components an electrical diagrams do you have any suggestions

[@jaybalgobind123]

To Mr . Zafer Yildiz , thank you in advance for a helpful reply. I am sure many others would be happy to get your reply. For me, it would be a Tution in alternators as well.

[@fabiandebasto9839]

Muy buen video!!, te faltó ver el torque que tiene. Saludos 🖖

[@abdulkadiraytac1189]

Kral doktürmüşsün yine emeğine sağlık 💯💯💯

[@enverdemirtas8441]

Tebrikler hocam çok verimli bir çalışma olmuş

[@electronicshelpcare]

Wow you are great 😌

[@gaspartqueiroz]

Thanks Zafer for the excellent posting! 👌 Could you next time highlight the circuit sketch as you solder on? It makes it easier to follow!

[@paveltroller2289]

A very nice circuit! But look at the power consumption! It takes up to 200W without supplying any mechanical output energy out! So, where is those 200W going ? I believe that keeping it on the speed takes about 50W max, it rotates freely. So, the rest converts to heat. I don't know, what's heating, whether it's the switching circuit or the alternator itself, probably both, but I believe that running it on such power for longer time will make it to blow. It's possible that the alternator has enough air cooling so it will survive it, but definitely, the efficacy of this construction doesn't look too much ecological. It would be also interesting to measure the mechanical output power it's capable to supply and the consumption it takes during it, it's possible that the efficacy will improve under load.

[@assassinlexx1993]

With such small wires. I can't imagine a very high output. Torque = boom

[@hermanwijaya194]

@@assassinlexx1993 gf FC cpyyuui ia

[@gamingnijer5368]

Is there a way we can get the battery to charge from the same alternator

[@ravanabrahmarakshas4263]

@@gamingnijer5368 nope. that thing is working as generator or motor.... if you turn it it is generator... if you give it power, it turns and it is motor. it cannot be boh at the same time..... but you can have two of them, one as motor one as generator and KILL the second law of hermodynamics, (that is fake), and generate a permanent motor generator that generates electeicity... there are lots of them on youtube. how many are fake? how many are real? second law is fake or real? you need to test to see the answers.

[@nimalkarunathilaka1538]

No

[@danielmatthews8475]

First of all, Kudos for a very clever and simple circuit. But I think a little explanation of how it works would probably clear up some confusion, and probably disappoint those who are ready to try and put this on their DIY e-bikes. The trick with any 3 phase motor is how to commute the current to the different windings in the proper phase to make it turn. This simple circuit relies on the fact that the power supply he used is in constant current mode. (note the red LED on the power supply labeled CC) When the current in the active winding reaches the 10Amps current setting of the power supply the output voltage drops and this causes the circuit to switch (or commute) to the next winding. This means that the output voltage of the power supply has a very large voltage swing on it. It would be interesting to see the output voltage of the power supply on an oscilloscope as the potentiometer is adjusted. This is how he can get it to work without an ECS. The main function an ECS is to manage the winding commutation. Instead this circuit accomplishes the commutation by combining the saturation effects of the motor windings with the current source capability of the power supply and some simple diodes and resistors which combine to make a 3 phase oscillator. Because the power supply output voltage has a very large AC component to it, and the field winding of the rotor is attached directly to that node on the alternator, the battery is a clever way to excite the field winding. Trying to design a circuit to control the field winding from the same supply would probably be a bit more complicated. In a car alternator (as opposed to a generator) the output voltage is controlled by varying strength of the rotor magnetic field (current in the field winding) since the speed at which it is rotating depends on how fast you want the car to go. On the other hand, The output voltage on a generator is proportional to the speed at which it is rotating. So basically, you can't run this circuit off of a voltage source, like a battery, it needs a relatively constant current source.

[@elniko4852]

Как хорошо что так много людей которые вообще не понимают электронику судя по коментариям.нам хоть работа есть

[@alexlo7708]

You mean they can put some switching transistor with a large inductor as a current buffer. And control circuit to keep voltage in 12V level. All this as pre circuit before driving this DIY. Thats right?

[@comancheflight698]

Add 12 alternating polarity permanent neodymium magnets onto the rotor and you remove the need for the battery.

[@Ozzy3333333]

I am afraid your wrong, I run this type of controller in CV mode for 3 decades. The reason its in CC mode is do to the low impedance windings on this generator, its low so when its generating 30~40A it gets less hot, if you want to run this size motor off say CV of 12v, you need three $1 100W power resistors from alixepress, this will limit its output power.

[@myronhelton4441]

They lie, it aint no brushless motor.

[@tiaocardoso9657]

Parabéns sou seu seguidor de tempos Parabéns novamente por simplificar outra vez coisas boas pra todos nós conheço alternador com essa explicação vai facilitar a minha pesquisa sobre o assunto importante prá nós que gostamos do assunto valeu

[@edilsonbarros8420]

Montei esse circuito e não funcionou , caso vc tenha montado e tenha funcionado pode me dá uma ideia ?

[@jproma25]

kzbin.info/www/bejne/o4a4kJ5nnLJqopY

[@piezaspararobotica]

Excelente , estoy maravillado , que con tan pocos componentes se logre , estos resultados, felicitaciones, ..

[@javiercuromendoza3598]

solo es prototipo

[@toohsynsyyn3572]

You are unique idea man sir very very good in all of your project and you teach us every day so we pray to God a special knowledge for you thank you sir very much.

[@riyadh.n1306]

Wow spectacular.good job brother..!

[@noteimportanada100]

hola se puede llegar a rpm cero o es complejo realizar un controlador de velocidad para estos motores y dar aplicaciones en pequeños modos de transporte como bicicletas ? saludos muy bueno tu canal

[@douglasalonso2440]

No da bien los datos Ni pone diagramas

[@moniaamic-uw5hi]

Fajny temat latwy do zamontowania jako silniczek do roweru z odp sterownikiem i bateriami 😊

[@rodrigoaguiar7058]

Era o conhecimento que eu mais precisava.Obrigado.

[@andinoag]

Vou tentar também 👍🏻

[@boavistamodelismo]

Oi Rodrigo, eu moro em Recife e gosto muito de eletronica. Esse turco é demais nos projetos. Vou tentar fazer um circuito desse aqui. Já montei um com ESC e tem pouca estabilidade, não dá pra tocar uma máquina. Vou testar esse amanhã

[@alceugaspar3388]

Quem montou um me fala se funcionou

[@sandrolaerciopiltz8240]

@@alceugaspar3388 Com bateria de carro normal não funciona, só com fonte de alimentação semelhante ao mostrado no video. Para fazer o chaveamento dos mosfets e girar normalmente o eixo do rotor, é necessário uma sequência correta programada, como por exemplo atraves de um micro controlador, que ligado à drivers, dispara os mosfets na sequência correta.

[@charliesimpleton7157]

Thanks for all your very useful projects. Your channel is one of the best that I have ever encountered. One thing I like is, you make me think and not only watch. More power to your channel 💪💪👍👍👍👍 Looking forward to all your new uploads.

[@marius.mihai71]

Nice job! Novice question: if the alternator is used in this setup, can it be used the other way around, to convert mechanical energy into electrical energy from a brushless motor?

[@nimalsandunsiri4024]

Very simple. thank you

[@mr.viktor742]

Очень хорошо автор показал всю суть. Спасибо за видео.👍👍👍🛠️🛠️🛠️🌟

[@randyserano7490]

So the alternator is in star connection, am I right? My question is.. How many watts is the maximum can handle the controller or the mosfets? Can I input a 48 Volts 1000 watts?

Elinize emeğinize sağlık. Güzel bir paylaşım olmuş. 👍

[@stephenboyd6378]

Zafer impressive! I have seen an alternator turned into a couple of different things in many different ways but until now never a motor. everything you did makes sense just never thought of it. Pretty Cool!!

[@santazonta1]

Elinize sağlık üstat düşük devirlerde tork üretebiliyor mu acaba

[@RarinbowHeart]

Brushless DC motor is actually a synchronous motor. Thus, the angular position of the magnetic field of the permanent magnet with respect to the magnetic field that rotates with the excitation frequency which is the oscillating frequency of used three phase Royer oscillator, must be fixed at a certain value in order to produce useful torque and to maintain the rpm. If you notice, at some powering up instances, motor shaft does not turn at first, shakes a bit, and after giving some initial rotation, fields are synchronized and the motor accelerates. In classic drive schemes, Hall effect sensors give the ticks to be synchronized or ESC handles synchronization tracing back emf voltages on three phase windings. Moreover, supply voltage can not be reduced below a certain threshold voltage that is the threshold of the Mos transistor, and therefore circuit actually can not handle low rpm/high torque drive. To sum up, driver circuit is simple and effective at high rpm/low torque applications with some initial triggering at start up. It should be improved to cover mentioned problems to drive at low rpm.

[@muchirigachirigachiri3839]

Well put

[@atwalcheapenergy3918]

Thanks sir ur this video solve my big problem now I can complete my project thanks again

[@kaplanbilisimatolyesi]

Hayretle izliyorum videolarını abi. Gerçekten çok başarılı. Helal olsun sana.

[@boavistamodelismo]

Olá ZAFER da Turquia, Excelente circuito muito simples, é o que eu queria, 3 Mosfet IRF3205 com alternador de carro. Vou tentar fazer aqui no Brasil. Congratulações e muitas felicidades pra voce aí na Turquia.

[@meliponariomeldocerrado]

Sera que funciona mesmo

[@lucasteixeira5947]

@@meliponariomeldocerrado Acabei de fazer o circuito, segui exatamente o vídeo só no lugar dos Mosfets IRF3205 usei os IRFP 250N que havia removido de uma placa de um inversor , funciona bem ruim na partida aquece os mosfets mas funciona com bom torque depois que arranca!!

[@lucasteixeira5947]

A titulo de experiência é bem interessante mas acho que no uso não vai suportar por muito tempo!!

[@meliponariomeldocerrado]

@Lucas Teixeira da pra por mais mosfets em paralelo vai suportar mais corrente na partida

[@kintushaami4404]

It doesn't work I tried it already

[@francoisguyot9770]

Beautiful. I like it. The alternator is a cheap way to get a powerful 3 phase motor, and your circuit is simple, cheap and easy to understand and build, so it's definetely worth trying. I previously used an Ebike ECS because it was also quite cheap and offered many other options. It worked like a charm, but the documentation for the wiring were very sparse. I like yours because I can modify it as I please.

[@danyalahmad2097]

give it a try and let me know if it work for electric bike

[@jasonmorgan661]

Just use more batteries to power the alternator exciter coil lol...

[@sergiubadaluta797]

Good job, thanks for video!

[@Bianchi77]

Nice info, thanks for sharing :)

[@Shinaiza100]

This is an excellent contraption Zafer. Congratulations. How's can I regulate the current supply to correspond to the voltage I require? For example, 19V is what my laptop needs, but I noted that your gadget produces 10A at this rotation level while my laptop requires 3.4A. And may enquire the use of the AA battery? Is it for exciting the alternator field? How long would this battery last before needing replacement? Is it not possible for you to setup a self-excitation circuit so as to eliminate the need for this battery? Thanks for the knowledge.

[@anlaz1]

При чем тут твой ноутбук😂😂😂 этн работает электродвигатель, который был генератором🤣🤣🤣

[@ayedurand]

Yeah, I couldn't see how the circuit would trigger the MOSFETs unless there was some funky zener like threshold but the diodes specified don't have that feature. Also, note that he never shows startup behavior.

[@felixyasnopolski8571]

This is just a driver for a motor. This circuit REQUIRES an power supply.

[@smferreiro2610]

This WAS an alternator in a car. Now it is used as a motor. Ir produces NO electricity, consumes it.

[@smferreiro2610]

@@ayedurand This whole circuit seems a little bit shady, to say the least. If it is "brushless", why does it need to "power the rotor"? How does that power get to the rotor?

[@walkstar4624]

Obrigado amigo ......estou estudando sobre o alternado para tranrforma-lo em motor brusheles para bike eletrica ....faça mais vídeos a respeito ....lógico que vc mesmo montou o circuito para girar .....o bom é com uma controladora de 1500 watts daí terá potência de verdade .

[@paulinho]

olá amigo, vc acha que seria possível dois alternadores adaptados como motores moverem uma moto? Gostaria de adaptar. Gostaria de saber, além de duas placas controladoras de 1500w, o que deveria comprtar para ter confiabilidade?

[@carlitomadrona6211]

Nice work, I just wonder how it performs under load and may be higher voltage.

[@martinmantelli1663]

para un alternador de 14v 90a hay que hacerle alguna modificacion o con este controlador funciona?

[@MutluAtessacan]

Selam Zafer bey ( ESC ) bağlantıları benzemiyor. Sadece ( ESC olarak bağlantıları 5v servo test, amper güçleri, pil bağlantı ve çıkış 3 faz ) Alternatör direk 3 fazı bağlamak elektrik olmayacak manyeti pil hariç... Başarabilirsen milyon değil MİLYAR kişi izleme rekoru çıkarır ve Kosgeb Ar-Ge size çağırabilir ve ödülü alabilirsin. Çin den şipariş durdurur. Tabiki burda Pilsan ve fırçasız motoru açıldı. Sen ESC için Togg fabrika gibi devlet sizede açabilir. Haydi bitir şunu ÇİN i

[@mutlusanoha]

Mutlubey Devlet bunu bekliyor zaten avrupalılar 2025 de uçan taksi arabalar çıkacağı söylüyorlar ve bundan önce TÜRKİYE başlamalıdır. Bir tek ESC kaldı.

[@jacielrj]

Nice! Muito bom mesmo. Só uma pergunta, nessa configuração o motor fica com quantos HPs em média?

[@VladThanatos]

Sim, vai esperando ele te responder em português...

[@e21performance22]

Hello, can I use this same irf bridge technique to control the three-phase motor of an electric scooter?

[@alexon2010]

Very cool, I'm a complete beginner in electronics, would you have a step by step on how to do this! About this piece that is used to increase or decrease the speed, would it have some way of being automatic, via radio frequency, wireless, bluetooth, in some way that I can change the speed at a distance that is short or even via arduino, because of the battery? Since you are testing with a bench source

[@jonnypeterson1904]

Я так и не увидел, когда из генератора достали щетки, чтобы он стал безщеточным

[@raifart125]

я думал обмотку якоря замкнули, но нет, интересно будет работать если коротнуть, этакий асинхронник или синхронник)))

[@user-mg7lu7dj3o]

Последовательно с обмоткой подмагничивания проще включить лампу накаливания от авто 10-20 ватт в зависимости от мощности "мотора". Тогда не нужен литиевый акку и 2 питания.

[@user-tl6fb6qi3j]

сколько часов он отработает

[@crenimrt268]

Видел не мало роликов по єтой теме, но сдесь я не понял....всегда распутывают концы фаз, ищут начала и концы обмоток, а тут он оставил фазы как есть, да ещё и впаял дополнительный провод, и что за место в которое он впаял? и такой вариант имеет место быть или те "класические" варианты всё же лутше?

[@Wick51]

@@crenimrt268 Четвертый провод, это средняя точка трех обмоток. Вместо лития на подмагничивание, я ставил две батарейки типа АА. В зависимости от напряжения, у меня менялся силовой момент. Хотя лучше всего два провода на щетки подключать к общему питанию через лампочку на 10 ватт 12 вольт. Генератор брал от Волги, у которого на валу только щетки, то есть с внешней таблетки, а не встроенный. Точно так же работает и генератор от 412 Москвича.

[@josepozzi2995]

Muy bueno , para un alternador con conexión triangulo del estator como tendría q ser el conexionado

[@jazuzzen5453]

Can you design so we can use it for mid electric motor for the “engine” and the “charger” or “brake system for bicycle ?

[@umutmuhammedturk9788]

Güzel çalışma olmuş ellerinize sağlık. Bu sistemi birde normal rc lerde kullanılan fırçasızlara deneseniz muhteşem olurdu ama gerçekten emeğinize sağlık olsun

[@ZAFERYILDIZ52]

👉❤ bu olabilir ve teşekkürler

[@nik685]

К ЭТОЙ БАЙДЕ НАДО ЕЩЕ, ПУСКО-ЗАРЯДНОЕ НА 20А ПОДКЛЮЧАТЬ - ГЕМОРРОЙ, ЛУЧШЕ ДВИГАТЕЛЬ б/у на 220в переобрести !

[@videomentaryproductionschannel]

Could you use this idea to make an electic bike, using the gears of the bike and this motor system 😀?

[@joesilva1330]

How many amps can this mosfet speed control give the brushless motor/ alternator

[@luistolini6593]

Sabe me informar , qual é a potência em HP que vc tirou da saida do eixo ??

[@elniko4852]

Zero

[@cleberwp]

Acho que só sae RPM alto mesmo hp eu acho ele não pode medir.

[@mahmud1196]

Bunu alatetörün diyot tablası nı iptal etmeden çalıştırırsanız 12v bir Akü hem altetnatörü Çalıştırıp hemde aküyü besleyebilir ve elektrikli bir bisiklet yapılabilir bence.

[@canarabaci194]

olmaz kardeşim. Burada fazla detaya girmeden şöyle söyleyim; adam bunu sabit voltajla yapıyor. Senin diyelim ki 16.8 lion pilin var ve 13 e düştü bu pildeki azalma dengeyi bozar. sürekli sabit bir kaynakla. yaparsan olabilir. Mesela çıkışa bir step up koyup çıkışı garantilersen olabiliir.

[@oscarvalenzuela262]

Good project!!!what is a battery use for?, it is needed in circuit? thanks..

[@murraysheerin6949]

Will it self start ? It looks like you give it a little spin by hand first before you oush the power supply button on.

[@nixo0077]

Hello Zafer, your project is interesting. The rotor rotates smooth, even in low speed in 2000rpm. In your one comment below I read that you not recommend it for an electric bicycle becouse the its efficency is low (Shrikant Bhai Bhosale). What can I do to improve the efficency?? If it needs more volatge it is possible to use batteries for 24-36 volts??

[@greggorrell]

You use a different motor.. it is not suitable for powering a bicycle.

[@nixo0077]

@@greggorrell Hello Gregory, I do not use any motor, you mind that the motor is too big ???

[@abuxxx3607]

Too many KZbinrs used modified car alternator in their go kart and ebike

[@nixo0077]

@@abuxxx3607 What do you mean "Too many KZbinrs used car alternator.." Perhaps, you have your own experiances, plesae share with YT. From my old cars I have 3 free alternators. I can reuse them or throw away

[@abuxxx3607]

@@nixo0077 kzbin.info/www/bejne/f3zUqmaoh7x9h6c

[@iuriibaranov3091]

Мастер навесного монтажа

[@recepseray1982]

Teşekkürler meslektaşım. Eline ve gönlüne sağlık.

[@fabianopereiradasilva9330]

Seria possível comprar esse circuito já pronto? E onde compro essa placa dissiadora, alguém sabe?

[@shrikantbhaibhosale]

can this will be used for making electric bicycle

[@ZAFERYILDIZ52]

In fact, I do not recommend it, the efficiency is low, but if you can afford it, of course it will work.

[@randyserano7490]

Yes you can. This is the alternative of ESC.

[@victoryfirst2878]

How efficient is this type of conversion ??? How powerful is an average alternator 120 amps compared to a electric motor Sir ??? Thanks

[@victoryfirst2878]

@Клим Ворошилов How do you translate the message ???

[@jarrahoyen148]

@@victoryfirst2878 he said unprofitable battery consumption is high. But i guess that depends on what you want.

[@hotratz69]

What would be the max. continuous current rating for this circuit?

[@trikthop]

Mantap luar biasah

[@freeenergy8273]

Привет! Зачем 3,7V АКБ? Можно подключить к тому же питанию 12V через мощный резистор или лампочку! 😊

[@wendellhammond7853]

It a scam

[@krtek2O2]

in this connection, the battery will be very happy when the alternating current induced from the stator starts to flow into it, but perhaps it will not explode, because it will soon stop exciting the rotor winding.

[@ZAFERYILDIZ52]

чтобы ротор оставался стабильным во время изменения мощности, потому что он потребляет 10 ампер и полностью использует источник питания

[@freeenergy8273]

@@ZAFERYILDIZ52 Какой там ток у ротора при 3,7V? Тогда можно поставить стабилизатор от 12 на 5V!

[@stevegartx]

You didn't take out the brushes. so its not brushless

[@zaminmutallibov]

Çok güzel abi.çok iyi bir faydali video.

[@alisharifian535]

I think this configuration will work on any three phase AC motor, provided that you supply it with a decent amount of current., because car alternator is simply a 3 phase AC generator.

[@nikolay5328]

не бесщеточный а щеточный так как ты щетки подключил, без щеток он бесполезен если только магниты поставить

[@killerpigszombi3382]

Что то я так и не понял, что заставляет транзисторы поочередно открываться?

[@cos_f]

сила мысли автора

[@killerpigszombi3382]

@@cos_f Возможно и так

[@RarinbowHeart]

Elinize sağlık. Güzel çalışma. Buradaki sürücü aslında Royer osilatörünün 3 faza çıkarılmış bir versiyonu. Trimpot ile mosfet Vgs gerilimi ayarlanarak aslında mosfetlerin Rds dirençleri ayarlanmış oluyor. Burada dikkat edilmesi gereken nokta, düşük Vgs geriliminde yani yüksek Rds direncinde mosfetlerde yüksek Rds*Ids^2 kaybı olacaktır. Bu da düşük devirlerde yüksek ısıl kayıp anlamına geliyor. Soğutucu yeterli olmazsa yüksek çalışma zamanında mosfetler yanabilir. Yüksek devirde sınırlı hız aralığında çalışma koşulu için basit ama etkili bir sürücü.

[@arlexarredondo9444]

Saludos, otra pregunta cuánta carga puede soportar con alimentación de 12 vol

[@user-bk1ft2be9u]

Судя по видео у него одна из проблем, ограничивающая применение, он сам не стартует, его надо принудительно крутануть в ручную.

[@Vitaly1962]

Без датчика Холла никак.

[@user-yy7ju3cp5r]

Но и драйвер на коленке собран, за 100 рублей.

[@SAEED_.1]

عاشت الأيادي عمل راقي جدا جدا

[@ZAFERYILDIZ52]

شكرا

[@abhisurwase2875]

Sir you are very clever in electronics.salut sir.i like it.india.

[@marciliolopesnegreiros6354]

Os melhores videos sao os dele 👋👋👋👋👋

[@user-mv6il2uh1u]

👍👍👍

[@ZAFERYILDIZ52]

Thank you my friend

[@kaskanbilgin]

Ellerinden sağlıklı helal olsun teşekkür ederim

[@mehmettezgan2424]

çok iyi olmuş elinize sağlık :)

[@gonzalodavidgara5110]

Cuantos vol y cuantos amp soporta este circuito?

[@sanjayshinde9786]

Very very useful thanks brother! Plz give no. Of MOSFET &circuit diagram!

[@akinnon2000]

wow very nice thanks. So THIS is how yuou build a simpler controller ? I love it.

[@maroncampanholi6552]

Amigo..esse fio q vc ligou no positivo e qual? Não consigo ligar o posito no controlador?

[@johndeeregatorleforum625]

Sous les IRF, il serait préférable de mettre de la pâte thermique avant de les serrer sur le dissipateur. Sinon tuto clair et net. 👍

[@user-yr9qr6nd3g]

I enjoyed your video and the circuit. This was for a 120 W application. I am interested in higher power usage like 4.5 KW, 12V at 375 A. What components in the circuit change? Also, as other comments point out, the alternator is a brushed one. What is different for a true Brushless alternator? Will the alternator start on its own? What is required for a bi-directional rotation application?

[@user-lj7xy8uc2z]

Привет, надеюсь что ты сможешь перевести на свой язык...просто не очень хорошо говорю на английском 😅😅😅😅...поищи как устроен и как работает генератор и тебе станет ясно примерно что тут делают....я ищу что-то что сможет работать на 1,5 KW как минимум и всегда у меня один вопрос: а резисторы в данной схеме выдержат столько мощности??? Просто транзисторы я знаю какие взять чтобы работали на 300+ ампер(их используют в самодельных вейпах большой мощности) и по вольтам они подходят, а вот на счёт резисторов у меня всегда огромный вопрос.... поэтому сейчас я решил что буду делать всю систему с ограничением тока на управление двигателя (тоесть с аккумулятора напряжение регулируется для регулировки скорости, потом регулировка для самодельного драйвера и сам драйвер хотяб на 20 ампер, в конце двигатель) но моя идея если работает не только "на бумаге" то только для электровелосипедов с двигателем не более чем примерно 500 W. Не знаю была ли эта информация полезна вам в вашей ситуации, но я старался помочь по мере моих знаний на данный момент. Удачи вам и надеюсь что у вас получится найти и сделать такой контроллер!

[@dakyszammis3714]

cara ta pra existir uma inteligencia igual a tua vou ate a suecia pra falar pros caras la de dar o premio NOBEL,,parabens,, outra coisa voce tem pra vender estas baterias azul ,,,acho que umas 4 dessas da pra abastecer minha casa de energia o mes todo,,,agradeço a ideia inovadora , o mundo nao vai mais ter falta de energia eletrica

[@francisguchie1973]

I see this is a Y configured alternator. Do you have an application for a delta wired alternator?

[@sl4ck2]

Very nice! 2 questions please: why not use power supply too for rotor power instead li-ion cell what is orange wire common wich is not used by regular brushless controllers?

[@imnotbeluga007]

Current limitation.. if that coil has a resistance of 4Ω, it will draw 3A from 12V - 36W, which is not always required. So, using a 3.7V Li-Ion cell, the power draw decreases to just 0.925A - around 3-4W of power. This circuit uses only 3 MOSFETs to switch the current in the coils. Regular ESCs have 6 MOSFETs, so the current can flow from one coil to another. Here, all current flows through just one coil and to the common point, that closes the circuit to the power supply.

[@Z-Ack]

So are all the 3 phases on that alternator referenced to groubd? And is why you only have 4 wires coming off of it? Cuz most have 3 separate windings isolated from eachother..

[@alkanbostanci]

Elinize sağlık hocam irfz44n kullansak bir fark olur mu çalışır mı?

[@pafunleal3849]

Very nice project, congratulations I have built the very same circuit to run a HDD step motor and it does the jobs, however, it does not self start...one have to start it by hand. I have noticed that at 6:30min, when you turn on ther power supply, the video is interrupted and when it continues the alternator shaft is already spinning... Can you explain the reason for this? Does it also require some help to start spinning? Thanks for your attention and eventual reply and again, congrats for the job well done Best regards Salustiano, Rio de Janeiro, Brazil

[@imnotbeluga007]

Most likely. This thing is too simple to start on its own. If field coil power is applied after the MOSFETs get power, the rotor's magnetic field may induce enough voltage in the coils to get it going on its own.

[@mmichniel12]

spoko, ale jaką moc można uzyskać?? I wydaje mi sie ze 140-200W na biegu jałowym to docyć sporo. Czy się myle?

[@rw4pjqradiomaster529]

Благодарю за схему.Повторить попробую.Интересная штука.

[@mucitusta37topcu4]

Zafercim rotor sargıya 3,7 DC volt yerine 12 volt DC vermeyi denedinmi? Ayrıca devri voltajı azaltıp çoğaltarakmı yoksa frekansı ayarlaması yaparakmı belirliyırsun. Ayrıca bg olarak kaç beygir güç alınabilir? Test ettinizmi?

[@sabrilatip7487]

Thank God ,youre genius, and hope to see more of your ideas,thanks

[@ZAFERYILDIZ52]

Gracias por el apoyo y los comentarios.

[@nimalsandunsiri4024]

I made this circuit and it works well thank you

[@user-mb5gs7no6n]

Отправ фота как вы его зделали

[@joaopetrusdesouza5707]

Very good. Congratulations.

[@celsocarvalho9703]

PARABÉNS belo trabalho

[@electproject]

superb idea for youtubers

[@chien0995]

it work for me! thank you!