How to Create a New Multi-board Project in Altium Designer

========================================================================
dtxvn.com/
========================================================================
Nhiều sản phẩm bao gồm nhiều bảng mạch in được kết nối với nhau. Kết nối các mạch này lại với nhau bên trong vỏ hộp và đảm bảo chúng kết nối chính xác với nhau là một giai đoạn đầy thách thức của quá trình phát triển sản phẩm.
Video bên hướng dẫn quản lý nhiêu PCB trong một dự án phát triển nhằm để hạn chế sai sót, tiết kiệm thời gian và chi phí trong quá trình phát triển sản phẩm
========================================================================
Many products include multiple, interconnected printed circuit boards. Bringing these boards together inside the enclosure and ensuring they correctly connect to each other is a challenging phase of the product development process. Have the nets been assigned correctly on each connector? Are the connectors oriented correctly? Do the plug-in boards fit together? And do all of the connected boards fit into the enclosure? A mistake at this late stage of the product development cycle is costly, both for the cost of redesign and the delay to market.
Managing this requires a design environment that supports system-level design. Ideally this will be a design space where you can define both the functional, or logical system, as well as a space where you can plug together the various boards and verify that they connect correctly, both logically and physically.
========================================================================
GIẢI PHÁP IOT - THIẾT KẾ BOARD - LINH KIỆN
🐥Tư vấn giải pháp điều khiển - Giám sát trong công nghiệp qua GSM, 4G...
🐥Thiết kế sản phẩm - Chuyển giao công nghệ.
🐥Cung cấp linh kiện theo yêu cầu: LCD HMI, RF, GSM, GPS, LTE, 5G
🐥Thực hiện các dự quy mô lớn và các dự án vừa và nhỏ.
THÔNG TIN LIÊN HỆ:
🐥GREEN ELECTRONICS TECHNOLOGY AND EQUIPMENT COMPANY LIMITED
🐥Address: 5th Floor, Songdo Building, 62A Pham Ngoc Thach, Vo Thi Sau Ward, District 3, Ho Chi Minh City, Vietnam
🐥Website: dtxvn.com/
🐥Zalo & Phone: [phone]
========================================================================

[@tienTran-ud5rk]

Video này rất hữa ích ! làm thêm nhiều Video nữa nhé

[@DevisPhuong]

Good job, Hope to bring more value to the community!

[@JuanZMax]

thanks, very useful. nice music

[@imignap]

I was about to ridicule this whole process with the time aligning it. Then I finally started to see the benefit on my board, the visual rendering here is far superior than exporting board to step losing all the pads, soldermask, vias, etc. and then assembling it in AutoCad/Autodesk. Now if only i can figure out how to create one multi board panel output. I'd be very happy.

[@laurjoost9317]

Good content, but: 1. Use better colors for text. Bright green on white is nigh invisible. 2. Get on with it. I just scrolled through 10 minutes of you spinning boards around in 3D. Yes, Altium has 3D, big whoop, it's not what anyone searching for "Multiboard Project" here for. This is 7 minutes of content drawn out to 32 minutes.

[@orbita1]

free content not always the best, but it is free, and it answered my questions.

[@dtxvn]

Hi @ll! Nếu các bạn cần hướng dẫn thêm hoặc chổ nào chưa rỏ có thể comment trên này nha!. Rất vui hỗ trợ các bạn

[@tranxuandinh7152]

Thank you so much,

[@dtxvn]

Hi @ll! If you need further instructions or if there is anything unclear, please comment here! It's a pleasure to help you

[@Rekudom]

This takes too long on Dilly Dally-ing. Also, think of contrast when using a neon green font against a light background

[@ahbushnell1]

Voice is possible now.

[@prashkd7684]

I like how you structure your project. Do you have a Blank project template that you can share?

[@dtxvn]

This is a commercialized project, so please understand

[@RonaldArthur]

Can you please help me with the 3D model for the base ANSI C136.41

[@dtxvn]

Yes! I can send you this model via your email.

[@RonaldArthur]

@@dtxvn [e-mail] Thank you so much.

[@dtxvn]

@@RonaldArthur Do you want to get Altium footprint for this part?

[@fpgaguy]

no no no no music. Just talk

[@ADavis-l5s]

Good job, Hope to bring more value to the community!

[@dtxvn]

Thanks!

[@ADavis-l5s]

Good job, Hope to bring more value to the community!

[@dtxvn]

Thanks!

[@NguyenNgocOanhDanh]

Good job, Hope to bring more value to the community!

[@dtxvn]

Thanks!

[@dtxvn]

Good job! Hope to bring more value to the community