JustGame ....Understand that I'm 65 and still in an analog world. Fortran IV is the only computer language I ever "learned." I'm am ordering an Arduino training kit when I can afford it. Digital here I come!!!
@TobyCowles6 жыл бұрын
Bud Brady you will pick it up the more you watch, I know when I first started watching GS I was just getting into electronics and barely understand anything but just hearing the terms used and working on my own projects I have a much deeper understanding of these videos
@sensiblewheels6 жыл бұрын
Bud Brady That's great to know. May I ask where are you from?
@budbrady32896 жыл бұрын
Anirudh Appala northern Indiana USA
@sensiblewheels6 жыл бұрын
Bud Brady Okay. I'm from India. Not sure how the logistics is going to work but I'd love to sponsor a basic kit for you!
@zebsolaria47632 жыл бұрын
Sir - I rarely comment on videos - HOWEVER today I chose to make an exception. I have watched MOST of your videos, and they rank among the best most informative learning activities I think anyone interested in electronics can choose to spend their time doing. What great work! Thank YOU!!!
@philipatkinson15323 жыл бұрын
Thank you. I just bought one and was getting very frustrated with its partial function. Simple things such as knowing it’s supposed to be used in a vertical orientation make a big difference! I don’t expect to fully understand the complex theoretical bits, it’s not not my day job, impressed that you do though. More impressed by your consistent ability to explain the relevant bits of complexity in order to use the product, across all of your videos. Very useful and solidly reliable, a ‘go to’ site where you’ve published for anything I’ve bought. Phil
@unusualfabrication99376 жыл бұрын
usually I hate it when youtubers are sponsored, but when it's something that is related, like your electrical engineering and JLCPCB I find it very likable
@unusualfabrication99376 жыл бұрын
actually I hate sponserships from mobile games, website builders and audible fuck audible
@xero1106 жыл бұрын
Every time I see you writing, using highlighters, and rulers it reminds of school in Germany. I lived in Germany and attended school until the 5th grade. I really am amazed at how much better schools are in Germany. I was so far ahead when I started school in the US. Ahead in everything, but English that is. Anyways, sorry for the off-topic rant, keep up the great videos.
@zachburke89066 жыл бұрын
88HD even schools between states in the us vary massively. Moved a few times as a kid, pretty much did 4th grade twice.
@owendavidmalicsi59006 жыл бұрын
In the Philippines, they use different colored pens to highlight.Not barging...sorry
@sirsundays6 жыл бұрын
Irony: Most parents and kids think the school system and quality in germany is bad and needs to be renewed.
@llluuuyyyooo5 жыл бұрын
Brilliant
@Emet-wd5mz6 жыл бұрын
9:37 GreatScott - *all we had to do * My brain - *was follow the damn train cj*
@peterhimmelman92414 жыл бұрын
Huh?
@prathamkalgutkar75384 жыл бұрын
@@peterhimmelman9241 GTA San Andreas Reference
@jonahswain6 жыл бұрын
One thing to consider is that while the parallel interface requires fewer clock cycles to set the data it may actually take more clock cycles on the microcontroller because many microcontrollers offer hardware SPI, I2C, and UART modules which operate independently of the rest of the processor.
@mupschiplayz18026 жыл бұрын
Im still wondering how these people with 10 million subscribers like Unbox Therapy can get that popular with doing very simple videos (just unboxing things) and you, Scott, (only!) 800.000 Subscribers...
@orange_tweleve10 ай бұрын
Because those channels focus on mass audiences who just watches videos without any indepth knowledge on anything and at best case be aware of the specs list of whatever being advertised and say it back like a parrot. They are the type of people who will tell you the ram of a phone that's 8gb is the same as a pc 8 gb because they only know that aspect but rather not know anything about bus speed etc.
@lammatt4 ай бұрын
Because youtube is mostly background noise you play when you are at your computer
@Miracle-Pheonix6 жыл бұрын
Your 1 million subscribers coming soon
@greatscottlab6 жыл бұрын
Well, it will take some time. But we will get there.
@Miracle-Pheonix6 жыл бұрын
Ok
@Miracle-Pheonix6 жыл бұрын
I'm your Big Fan
@deveshtomar51026 жыл бұрын
Clasher King Ayan very soon
@deveshtomar51026 жыл бұрын
GreatScott! Yes
@WhitEagle7 Жыл бұрын
bro, I feel like every project I start working on, you already have a video about it! Amazign!
@vedant33216 жыл бұрын
Highlighter used upto it's maximum capacity 😉
@MarionMakarewicz6 жыл бұрын
the money shot: "How the hell can we provide a total of 1040 control lines for the Arduino?" I just love your videos. Thanks so much for enlightening me.
@dzorzstops51366 жыл бұрын
Perfect video. I love your videos. Just keep like this. The world needs people like you.
@greatscottlab6 жыл бұрын
Thank you very much :-)
@MehmetSutas6 жыл бұрын
Although those screens are listed as 5V tolerant, they work with 3.3volts. You need to use a level converter such as BSS138 mosfet in order to use SPI interface.
@ams00636 жыл бұрын
You literally read my mind. A few days back I was also thinking about a touch screen display for my arduinos and now you made a video about them. Wow amazing you are awesome.
@promisenwaobilor956 жыл бұрын
Am always looking forward to your videos. they're all GREAT
@fentzke6 жыл бұрын
Like Frosted Flakes! kzbin.info/www/bejne/hWeolICJjLejo9U
@alankhaev84676 жыл бұрын
I can't wait until you get 1 million subscribers. I've been watching your videos for 2.5 years now!
@fazlanahmed56576 жыл бұрын
No words. Really found a better person. Well done ...
@Kamaropoulos5 жыл бұрын
"But we live in 2018" Jokes on you, greetings from 2020!
@technoboi15014 жыл бұрын
lol
@MrKmail4 жыл бұрын
Joke's on you. Greetings from 2025.
@bsm2k1834 жыл бұрын
Jokes on u greeting from being locked in the fucken house
@screwoff87604 жыл бұрын
Jokes on you, greetings from hell
@EthannCraftt4 жыл бұрын
Considering how 2020 is going I think the jokes on you.
@RegsterU6 жыл бұрын
*Try Nextion Displays, they are more expensive but they allow for more complex GUIs since they run the GUI on their own and can communiceate with microcontrollers.*
@RegsterU6 жыл бұрын
It also only takes up two pins on your arduino, and there is a software to visually edit your GUI
@kruxx6666 жыл бұрын
Nextion are the best displays for arduino. You can use them also with ESP chips.
@sgt.frosties94986 жыл бұрын
I had no idea those exist, I am already looking into it now and it looks promising for my room (door lock/tempreture/curtain) project, instead of manually coding my display i could use this and half my workload. Thanks :)
@ArduinoBasicsBlogspot6 жыл бұрын
I agree - Nextion displays are better than these. And also more expensive. The price for these are good though. I guess it depends on your project and your budget.
@mac_uk54646 жыл бұрын
Nextion are better, but cost more. Maybe in the future, MCUfriends will develope an editor like Nextion, & bobs your uncle, they will be the favourites.
@baseandtrance11106 жыл бұрын
This is just much more than great Mr Great Scott I needed such a video since so long cause I love to make everything from scratch even an LCD or anything Thank you so much for this
@greatscottlab6 жыл бұрын
You're welcome :-)
@simangundeep87705 жыл бұрын
What I like from each of your video is how you end up your video 👍, "stay creative" that's so GREAT
@dileanperdomo38215 жыл бұрын
Well deserved million subscribers, btw
@KrisKasprzak5 жыл бұрын
I have been able to use Arduino Uno's and Nanos with those types of screens but you have to use series resistors with all pins connected to the display simply because those displays are native 3.3 volt and don't like the 5-volt signals
@NilsBelde6 жыл бұрын
Very nice. Like always. I like your videos. Just a small correction: it should be 0-239 and 0-319 at 7:39.
@johndoesson4 жыл бұрын
A programmer once said "We are celebrating our 0th year wedding anniversary"
@brycef.58126 жыл бұрын
Keep up the awesome vids. Highest quality go-to channel for any electronics project
@greatscottlab6 жыл бұрын
Glad you like them :-)
@jtnoble32118 күн бұрын
5:50 6 years later, here I am with the SAME issue. Turned out I couldn't use the Adafruit library everyone else uses, had to use LCDWIKI to get it to work. Now I gotta figure out if it's a slow arduino I'm using, or if the library is poorly optimized, cause clearing the screen takes like 10 seconds!
@UpcycleElectronics6 жыл бұрын
Lol. *Look up the MCUfriend library for that shield based display* ...you know...the one mentioned on the silkscreen of the breakout board... That is one of the best display libraries written for Arduino and TFT displays. That library can even auto detect the hardware of the display because the MCUfriend library also specifies the shield pinout. The hardware is probed and supported using conditional if statements in the code so it can support a range of different hardware. It's an incredible example to check out. One thing I'm curious about are the memory IC's associated with a lot of these displays. Often they are unpopulated footprints on the breakout boards. I'm curious what they can be used for. Can these store backgrounds/images to lessen the load on the uC, or speed up the display in some other way? Do we need to program the memory externally or in circuit? Has anyone found a better deal on an ili9341 display than $4.23 shipped (AliEx/what I paid 10/2017[the listing has changed since]) ?
@GRBtutorials6 жыл бұрын
$4.23 is expensive? That's about the price of an Arduino clone!
@UpcycleElectronics6 жыл бұрын
@@GRBtutorials That's about the price of 3 arduino clones if your willing to buy the all too common versions that use a ceramic resonator for the 328 like the official design specs. I have found the micro and mini clones with crystals instead of ceramic resonators for ~$2. It doesn't really matter though bc Ardy1 is all about the libraries not the hardware. If the hardware really mattered we should have been using the ATmega1284 ages ago, as it has the most features of any ATmega uC that comes in a 40 pin replaceable dip package. There is an ArdyIDE compatible version called the "Sleeping Beauty" project, but I haven't tried it myself yet. I will soon though bc I found an AliEx seller that posted ATmega644's at $0.90 each. I ordered a half dozen, and he's disabled the listing as "unavailable" ever since. Arrow also has the dip 40 version of the 644 for around $5 and with their free shipping deal, they have the best price I have found on those. I'm primarily interested in building a home etched version of the open source AVR transistor tester project version 2 from the official documentation using the 644, but I want to try the sleeping beauty hardware eventually too. That project is easy to find via google and the official page links to gerbers posted publicly on Osh Park. They can be downloaded and etched or they also work on the PCBway or JLCpcb site. I have no affiliation with either. However if anyone is interested in projects like this, I know JLCpcb hasn't stopped people from doing panelized designs. PCBway says they will not do panelized designs without a surcharge. I built a cart of items on JLCpcb awhile back. You can modify the 10 quantity for $2 first order thing to order a quality of 5, if you order multiple items. Each quantity of 5 was $2 as it showed in my cart and I took it all the way to the "input your credit card" screen. I didn't purchase it though as I was just exploring the option at the time. That said, if I understand all of these unspoken options on their site I can panelize two or more designs with multiple projects fit into multiple 100mm × 100mm double sided design/gerbers, then they are $2 each with free shipping. ...Sorry ....tangent...All that said at $4.23 for a single LCD... Even if I etch a design myself, I have already learned the hard way, never buy 1 of anything. There is no replacement for the ability to swap 2 items to determine if one is faulty. I've spent many hours trying to solve single product faults because I was dumb and ordering one of whatever thing. So at a minimum I'm looking at $8 for this LCD. If I'm going to order 5 or 10 of a PCB I need to order 6 or 11 LCD's. So that's going to be around $21 to $46 just for the LCD. However, building all of them, keeping one or two, and listing the rest on eBay should cover most of the project's costs. That's how I view these kinds of purchases. I break everything down to what the single quantity price is, but I'm usually looking for the best deal on multi-quantity listings or price breaks ;) Sorry if writing details offends anyone. I'm just sharing and like when others do the same. -Jake
@GRBtutorials6 жыл бұрын
Sure, I was just doing a rough estimate with "the same price". The clones I buy cost 3 € minimum. Does Arrow really have free shipping no matter the price of your order? Digi-Key and Mouser both have a 50 €/$ minimum order price for free shipping. Do they ship free to Spain as well? For prototyping and one-off projects, etching your own PCBs is the best method. It's the fastest one (you can make a PCB in 20-30 minutes at most and I don't know of any carrier shipping that fast) and most likely the cheapest one as well since you only need one. And what if you make a fatal, unfixable mistake? (like Jeremy, aka GreatScott! made in one episode of DIY or Buy that made him go for Buy. Seriously? You give up already?) Then you have 10 boards that are junk. But if you etch them, you only have one broken PCB. I agree with you on buying more than one of anything (though I sometimes break that rule if it's too expensive), but it's not that expensive unless there are really that many faulty components. Then you should buy from another source as that one is unreliable. But if all of the ones you buy work, then don't worry, you'll find some way of using them all! And making various boards and selling them sounds like a good idea, especially considering you can sell them for more than the components cost you!
@UpcycleElectronics6 жыл бұрын
@@GRBtutorials Agreed. My biggest issue so far with etching is just getting my trace resolution low enough. I can do a perfect double sided etch with dry film at a trace resolution of 0.6mm to 0.75mm using the super cheap Chinese film and cheap copper clad. I try to keep my traces around 1mm and larger as much as possible right now. I've gone all the way down to 0.4mm using toner transfer but the traces are getting sketchy at that kind of resolution with the cheap setup I'm using. I'm collecting the stuff needed to upscale my etching setup now. I think I'll be able to improve my resolution if I stop trying to squeeze my designs onto 10cm × 15cm copper clad with ~1cm margins. I just ordered some 8in × 12in (~20cm × ~30cm) from ABCfab on eBay last night. That should maximize my potential design area close to the size of an A4 transparency. I'm going to try to panelize a few projects and make an attempt at a 10×10 LQFP-64 at 0.5mm pitch in the next few days. I also hope I can replicate my toner transfer TSSOP 0.65mm pitch/0.4mm resolution using dry film too. I've heard that I need to pick up some Dupont Resiston film to get better results but I still need to order it. I guess I need some better enchant though bc my last project iteration took 45 min etching and you just claimed you could do 2 total iterations in that timespan. It takes me about 3 days to do each revision of a design, but I'm a partially disabled gimp and very slow. Maybe when I get my setup dialed in I'll be a bit faster. I know I'd speed things up if I figured out how to add the teardrop trace plugin to KiCAD. I currently design in KiCAD then export an SVG image to GIMP. Then I finalize my design in GIMP by removing every sharp edge and angle. I've only done around a dozen etches using dry film so far, so I'm still dialing it in. In my opinion Jeremy is mostly interested in monetizing this whole YT affair. Almost everything he does is focused on advertisers and referral kickbacks. I don't hold that against him or anything. However, his best uploads IMO are the ones where he's building or doing some project he actually wants to work on like his bike project, solar roof, or RGB light-wall-thing from way back. I don't think he's got a very technical background beyond the electronics stuff. Most of the YT community is in the same situation though. We can't all be Big Clive or AKA Kasyan. I think it would prove challenging for Jeremy to develop a solid prototyping system and keep his weekly upload schedule. Plus the largest audience here on YT are the absolute beginners not the intermediate or advanced enthusiasts. Financially, he's probably right where he needs to be with content. As far as Arrow and the free shipping deal, I'm not sure about how their international business works. The deal I see is for free overnight FedEx shipping with no minimum order. I've done a few $20-$40 orders so far and it's pretty awesome. I've almost ordered from digikey a few times in the past when they were the only one that stocked a part or two, but I have always found alternatives and equivalents. Supposedly, there is a way to get free shipping (plus cost of a postage stamp) from Digikey if you send a BOM on some kind of ancient mail order form and include a check for the correct total. There's an old post on the eevblog forum that details this, and has the pdf form IIRC. That's too much hassle for me, plus Digikey already has the highest prices on every bom I've compared against mouser. I've ordered from mouser a few times but they cost me ~$4 shipping. I'm in the greater Los Angeles California area so they all have business operations in the state which means I have to pay ~10% extra in state sales tax too. Free shipping places Arrow on even footing with AliEx sellers on a lot of things especially more modern microcontrollers. The next day delivery means they are by-far the most convenient option I have available. Their website is really bad though, and the mobile version is practically useless. I think they have international operations and their FedEx deal could be int, but I don't know. Most of their shipments come to me from out of state so it's not a local kind of thing. -Jake
@mannhansen93375 жыл бұрын
@@UpcycleElectronics Totally agree. On Ebay always buy at least 2 of each. Mcufriend library by David Prentice helped me getting those Mcufriend tft modules come alive. They are produced with different control chips and with no documentation or marking and they can be hard to identify. Check also this site: www.tindie.com/stores/MCUdude/. This board supports all the 40 pins ATmega's. Up to 1284. A little expensive,but good quality.
@Tubaii256 жыл бұрын
Try a nextion display... Its just an lcd display, but with its own microcontroller that loads the UI from built in SD card adapter..
@Tom-hg9lw6 жыл бұрын
And you only need 4 Pins (Rx, Tx, GRD, Vin) But be careful when buying, if on the back "TJC" is written, it is the Chinese version and it would NOT be running with the Nextion Editor.
@Tubaii256 жыл бұрын
@@Tom-hg9lw Hmm, I didn't know that. Thanks for the info! Having just 4 pins(effectively 2) is also a pin saver!
@Tom-hg9lw6 жыл бұрын
I made this mistake because the article was cheaper and in ebay the title was " Nextion 3,2" ". And now I must have the chinese editor running and paralel the nextion editor so I can see which buttons are to press. very annoying :-(
@edism6 жыл бұрын
lol sorry I had to laugh @Tom, thanks for sharing though. I'll keep that in mind since I was interested in purchasing one.
@HarryBrentonMusic6 жыл бұрын
Great! Now time to apply this to my Raspberry Pi Rover so I can access controls on competition day!
@Raghib6 жыл бұрын
*Warning* Alot Of Highlighters Were Abused In The Video
@ArrtusMusic6 жыл бұрын
Hey, Scott! Do you think you can make your own Smart Glass? Like the dimmable transparent glass. Would love to see a video on it!
@victorchorques48936 жыл бұрын
Great video again! Is always welcome to have in-depth explanation of technologirs used.
@SharkyMoto6 жыл бұрын
das hat halt immer zwei seiten, ein touchscreen lcd is natürlich super schick und für sagen wir einen 3d drucker bestimmt auch einigermaßen praktisch. aber die meisten sachen die man mit einem arduino macht sind doch eher simpel, man braucht da keine großartige GUI oder einen touchscreen. sagen wir mal, ich bau mir ein punktschweißgerät, da ist die warscheinlichkeit sehr hoch, dass ich handschuhe trage, da is ein dreh poti mit taster um einiges angenehmer zu bedienen als ein touchscreen.
@mihai._.despinoiu6 жыл бұрын
Excuse me?
@MrJason0056 жыл бұрын
greatscott is german
@TB-jl9fr5 жыл бұрын
Klar, jede Technologie hat ein für sich perfektes Einsatzgebiet.
@RolfResler5 жыл бұрын
FYI: The Display you tied on @5:42 is 3.3V only. Although it claims to be 5V tolerant, it is NOT. Mine was not working as well, so I used a Level-Converter and... "voila", it works perfectly. (You can also use a couple of resistors, but that turned out to be not reliable at all) You can use 3.3V Arduino boards. I use a Bluepill STM32 board now with the ADAFRUIT_GFX_AS and Adafruit_ILI9341_STM libraries and this is fast as lightning. But thanks for the great video!!!
@MrPenguin0986 жыл бұрын
I say wow Great Scott! As a newbie in electronics I'm learning a lot watching your videos. I've started from your into to electronics. Thanks.
@rondlh206 жыл бұрын
7:38 Interesting, a 241 x 321 pixel display, are you sure?
@fisherdigital6 жыл бұрын
Thank you for all the work you put into your videos. I learn very easily from your teaching technique. Thank you.
@GonzoRibeiro6 жыл бұрын
As always...liked your video, detailed explanation, links to material and the last but not the least...learnt something!
@VarunSingla5 жыл бұрын
The video is very very good. I watched other videos also. Your video gives information of about 100 videos in one.
@saurabhshekharorpe83946 жыл бұрын
Which pen you use...please tell me...i wannna buy
@noahrodeghiero96406 жыл бұрын
He is using a torx screw driver in this vid. These displays dont really need a pen to use but i recomend, to just a normal pen.
@saurabhshekharorpe83946 жыл бұрын
Noah Rodeghiero ...noooooo....the pen by which he is writing on paper....i find it cool...so i wanna buy
@josech57436 жыл бұрын
Stabilo
@saurabhshekharorpe83946 жыл бұрын
Xilog tysm
@dumitruene4026 жыл бұрын
Hahahha nice one
@JoeyAbsi6 жыл бұрын
Can you please do a camera stabilizer with an arduino. Thanks!
@greatscottlab6 жыл бұрын
I put it on my to do list
@JoeyAbsi6 жыл бұрын
GreatScott! Thanks man!
@isoProxanol6 жыл бұрын
Joey Absi well you have to consider that his to do list may be a _little bit_ long... xD
@1996BRECHT6 жыл бұрын
I really like those zoomed in views of the LCD, could watch that all day :O
@snouthusky35545 жыл бұрын
Unless mentioned before, cheapo screens like the SainSmart are likely to lose touch functionality after a year or so unless you add a protective shield (like a phone display cover) and protect the flat-cable by putting something hard on top of it, or repeated use/clicks will lead to intermittent failure due to material stress. They're cheap and good for experimenting with, but go with a tougher-quality display if it's meant to be used over a long period of time, or in rough environments such as being carried around in a pocket.
@jinn36906 жыл бұрын
The great tutorial video that I haven't watch before. That was so explicit. Good job man
@669fusion6 жыл бұрын
definitely was searching for such vid!!! thanks a lot scott!!!!!
@greatscottlab6 жыл бұрын
You're welcome :-)
@markmark29616 жыл бұрын
I really love how you always make projects about things what I am fancying to try :D Love you man (nohomo), keep up the good work!
@shraiwi6 жыл бұрын
I have learned pretty much everything I know about electronics from you... Thank you so much!
@greatscottlab6 жыл бұрын
Glad you enjoy the videos and learn something new. Thanks for watching :-)
@techjeff62276 жыл бұрын
Thank you! I've been passively brainstorming how I'm going to implement my touchscreen UI for one of my projects.
@reedsabc6 жыл бұрын
I had the same issues with 4 wire SPI version, switch to libraries, you can use all Adafruit commands with little or no changes to sketch.
@mutaroex6 жыл бұрын
I will never miss your show is the best thing to me 👍 👍 👍 👍.
@greatscottlab6 жыл бұрын
Thank you :-)
@mutaroex6 жыл бұрын
K Bro no need to thank you help me to go for electronic in Nigeria 🇳🇬 that a lot keep up 👆 Bro.
@ArN56 жыл бұрын
Awesome videos man so glad you are still making more!
@bertoid6 жыл бұрын
I would like to have seen you try the serial interface module as well. To see if it's just too slow, or fast enough at least for limited applications.
@PierAisa6 жыл бұрын
Did you discover what was the problem with the first serial interface LCD display ?
@PrinceCharles236 жыл бұрын
I also ordered 2 of those 8 bit displays and could not get it running for the life of me. Just by accident I tried the other one and it worked immediately. So it is quite possible that your serial display is broken. I completely agree with your statement about pin usage. On a nano you have 1 or 2 pins left. One other thing: better to draw complex UI on the computer and show the image on the display. This way you "only" have to implement the click map.
@lahirupamodya61886 жыл бұрын
it is such a coincidence that I ordered my first a TFT colour LCD display on AliExpress on today morning : )
@alexwoolum6 жыл бұрын
The issue you had with the first screen was logic level voltage. Try putting a 10k resistor on all the data lines and it will work.
@Greg749484 жыл бұрын
Thank you, GreatScott for this very informative and helpful video! It will definitely help me with using my LCD touch screen shields, which I bought just a few days ago. :)
@crxxpslvyr78876 жыл бұрын
yeah brand new video!!!!
@HighMojo2 жыл бұрын
Thanks!
@greatscottlab2 жыл бұрын
Thanks for the support :-)
@alyology06 жыл бұрын
i used to watch jefree star youtube vids and now im watching scott's! and i luv itttt
@hermannpaschulke15836 жыл бұрын
The serial one works great with the Raspberry pi, because the kernel has the needed FBTFT driver built in. There is a driver for the touch panel, too so you can use it to run the normal Xorg gui on it.
@DaDavid156 жыл бұрын
Really enjoyed your tft lcd theory breakdown
@JokingChickenn6 жыл бұрын
This... is... exactly what i needed!! Thx for the video!!
@doosrah80295 жыл бұрын
What equipment and knowledge will I need to become a pro at designing display panels?
@gursharanmarwaha33766 жыл бұрын
A great creative video as always! 👌👌
@noahrodeghiero96406 жыл бұрын
I have always wanted to put one of these on my rc car but i didnt know how to implament it, Great vid scott!
@jasonwalker46103 жыл бұрын
Hi Scott. I am sure you figured the SPI version out by now and my not even read this message but, the Arduino uses 5v IO ports and the TFT SPI uses 3.3v signals. You have to create a voltage divider for the SPI data connections. Also add the RST Pin #define if using the adafruit library.
@mrbdrm26 жыл бұрын
You actually bringing really important and usable information to us. Thank you very much
@ninadtaralekar6 жыл бұрын
Hello Scott.. thanks for the video... You have taken exact examples with the gist of the codding and basic working.. thanks a lot for presenting variety of projects..
@88673486 жыл бұрын
Love your videos. However, i don't understand most of them. I find it amazing how you use all those formulas to figure out everything.
@topten70645 жыл бұрын
You are great teacher and good voice, thank you very much
@xH3X3Nx4 жыл бұрын
Very well detailed and instructive!!! The layout of the information and presentation are prefect. Much thanks and keep it coming.
@Babby60106 жыл бұрын
First we had KipKay Now we have Scott Way better than a dad to teach me thing😂
@DimiEG6 жыл бұрын
Your tutorials is always interesting and useful. Thanks.
@intelinside55746 жыл бұрын
Not gonna lie just came for the intro... Haven't heard it in ages. Awesome video to though. 🙂
@ninaddeshmukh26216 жыл бұрын
Your videos are always cool we always learn something new fro. ur videos keep uploading
@annatownsend18694 жыл бұрын
Video: How to make a touchscreen. Emmet Brown: Great Scott! Marty McFly: I know. It's heavy.
@tharinduuld6 жыл бұрын
Very useful video....... GreatScott! .. Keep continuing .....
@hamzahteknik20183 жыл бұрын
GreatScott is a Great Channel..... so amazing,,so smart,, wonderfull,,
@vrajesh29726 жыл бұрын
Really GREAT SCOTT Is it possible to use the mobile or tablet as an oscilloscope using it's audio jack and giving pulse threw Arduino. Try to make a video in DIY or BUY section.
@waynehawkins6547 ай бұрын
Just found your channel. Right at the start of this video you show a click rotate switch to select on a screen. What video do you have showing the build. It's what I'm after for a project
@wggaminigunatunga8014 жыл бұрын
You are great. I don't have words to express my gratitude. In my mother tongue " ඔයාට බොහෝමත්ම ස්තූතියි".
@sivaranjans24526 жыл бұрын
If we are counting the array from 0, shouldn't the end values be 239 and 319 for x and y respectively @7:40 ??
@freeelectron82616 жыл бұрын
Good tut on colour touch screens for Arduino projects - thanks! Nice handwriting btw.
@Kostanj426 жыл бұрын
that looks so cool! gotta try it! btw roard to 1 million!
@CT-qx8nl5 жыл бұрын
There's smart, and then there is this fella.
@ahmadbanshee97145 жыл бұрын
Thank you . It was complete as well as not long however I notice that you put your finger in a not exact location of the buttons which means touch screen may not work exactly. Maybe you should create a video about calibrating touch screens.
@electroboy74226 жыл бұрын
a lot work there, big bravo to you 💪💪💪💪👍👍👍👍👍
@BuildItnow6 жыл бұрын
Really interesting video. Looking forward to 1 million video special!
@jaivikdhebar3 ай бұрын
Amazing explanation as always ❤
@Darieee6 жыл бұрын
I don't know ... I still would go for some sexy rotary encoders over a chinsy resistive touch screen Those LCDs are very cool though ... am seriously considering moving to those (so far I've used those relatively tiny OLED screens ... aaand ... meh ... the SSD1306 ones are fine, but they do suffer quite a lot of burn-in, especially since most of them are blue, which apparently is the color that dies the quickest)
@RikyLoGo996 жыл бұрын
I would like if you make microcontrollers tutorials. Please consider that :c I love how you explain things.❤️
@rodgerhanson3 жыл бұрын
Hello there, thank you for the video and examples. One thing I don't understand is, when I put you codes on the uno, the text is a mirror image, not the right way round. Can you advise. I presume it might be something with the screen??
@AntenainaLand6 жыл бұрын
Sssssssssstay creative and I will see you next time! great video as always!
@lucamoscardini81065 жыл бұрын
I also had some problems with SPI display till I realised that it has 5Vcc power supply, 5Vcc with a 10 Ohm resistor to LED but 3.3 Vcc logic. Now it is working fine but I am looking for info on how to manage touch signals (that also must be 3v3).
@ADILKHAN-er9tp6 жыл бұрын
Very nice video. NASA level research...
@YFTOUCH Жыл бұрын
Very professional!wonderful! Thanks for your sharing!
@divismorefilms6 жыл бұрын
Check that your SIGNAL lines are at 3 volt at time 5:52 , if not you will get white screen. Been there done that. You will need a voltage converter. Just subscribed :)
@meanxmeanx17636 жыл бұрын
The first one did not work maybe because you used 5v IOs. You *NEED* to use 3.3v I/o, powering at 5v is fine though.. The Arduino is not powerful enough / not enough ram for those screens. Much better to use a STM32-duino. Additionnaly, in my experience if you use the same SPI but for both LCD and touchscreen , you may need to be careful about speed. The touchscreen chip is much slower than the LCD chip.