🖨 How to Create and Print Larger Designs on a Sawgrass SG500

[@DesignBundles]

Watch Next 😎👇 🏁 How To Sublimate Graduation Garden Flags kzbin.info/www/bejne/fqCXqayviMxqZtk 🤩 How to Sublimate a Garden Flag kzbin.info/www/bejne/Y3-lZXahlraHias 🖐 5 Tips for Sawgrass Creative Studio kzbin.info/www/bejne/nKqQl4t-o8uYo7s

[@user-uc1dn5no4f]

Thank You!! I have been trying to figure this out for months!! You are a bad ass!

[@ljcl1859]

Thank you so much. I was starting to regret my purchase of the SG500. This makes me feel so much better. I wanted to press a pillow and I thought it would look so much better with the whole pillow covered by the design. Also, now I'm going to do garden flags, so yay!

[@chassitybucklew6010]

I was feeling the EXACT same way this is a great video thank you

[@DesignBundles]

You are welcome! - Brittany

[@kellyclinton6451]

Oh my goodness, you just saved my life! I have been trying to figure out how to do a 30 oz skinny straight Tumbler for a customer. I have made this so much harder in my hair than it really needed to be! Thank you so much for your easy explanations!!!

[@flavormaker]

You just gained a new subscriber! This is exactly what I needed to know! Your instructions are presented so clearly. Thanks for sharing your knowledge.

[@chassitybucklew6010]

Me too!!! Thank you so much 😁

[@BarbaraRogers65]

Thank you so much for helping me print a larger design, I was just making my Mom in Law a Garden Flag and I needed it larger. Your instructions are very clear and so very helpful.

[@michellestamps5295]

Thank you for this video. I really appreciate when you take the time to teach us different ways to use the software that comes with the sawgrass.

[@Wizardofodds221]

Thank you so much for this video. I have a doormat I need to sublimate and had no idea how to do it-now I do!

[@odettewatts2325]

Thank you so very much. Tried it and it worked. No more small designs for me.

[@DesignBundles]

That's great to hear Odette! 😊

[@Picklerhdhd]

You just changed my whole game! 🙌😍

[@DesignBundles]

Hey Chelsey! We're so glad you found us and we were able to help with your project. If you have any questions, just ask! We're here for you! - Dawn

[@susanna1207]

This is sooo great. Get my Sawgrass 500 tomorrow 🎉

[@calasiter]

This is the clearest explanation I've seen, but I did kind of lose you when you were doing the cutting. It seems sort of random where you made the cuts. However, my main question is since this is May 2024 - almost June 2024, does the new PrintMaster have the capability of doing the same thing that the old one did for making the individual prints? I also need 4 prints to make one big design for porch pillow covers. Thanks so much.

[@maddislemonadestand]

Thank you so much for this tutorial. You explained everything perfectly.

[@DesignBundles]

Hey Danielle, thank you for your kind words and THANK YOU for watching with us today! 😊 If you have any questions about using your Sawgrass, let us know!

[@parrot-imagellcadronecompa6148]

Awesome job! Just gain a new subscriber

[@vanessasummers8549]

Very nice

[@amandasullivan9140]

Hello, I keep having an issue with the png design, not being the same size as i saved it in illustrator. An example is, I created a phone stand sublimation design to be the exact same size as the phone stand. After i uploaded the design into creative studio, the size changed?

[@SonjaYeve]

I Love you! Thank you so much for this video!

[@jeankohtala666]

This is so great! Thanks for the tutorial. This opens up so many possibilities!

[@DesignBundles]

Glad it was helpful! 😊

[@DayDreamerDonna]

Just the video I was looking for, I only need a little join in my project and I couldn’t figure it out, I’ll try this tomorrow!

[@DesignBundles]

Amazing! Happy it was helpful!

[@kalliejoscottonpatch]

Thank you

[@cindyneal237]

Excellent tutorial! Just what I needed! Thank you so much!!!

[@DesignBundles]

Glad it was helpful!😊

[@julieanders763]

Wow awesome and very easy to follow. Had a prospect today ask me about 2 all over tshirts. Good to know. Thank you

[@DesignBundles]

Great to hear! We're always happy to help!

[@carpentersization]

Oh if u saw my note from yesterday thanks for doing this lol :) :)

[@pennyjanowski6308]

Thank you for your help

[@DesignBundles]

You're welcome! 😊

[@AllThingsShun]

This was very helpful, thank you!

[@DesignBundles]

Happy to help! 😊

[@Danny_Crispino]

Thank you. I was struggling on how to print my sublimation design for my 14 in wod round

[@DesignBundles]

Thank you! Glad it was helpful!

[@lindawillms5815]

I have trying to print a larger design on a photo plate.. I keep getting a line down the middle where I cut.. What am I doing wrong, I am not over lapping the paper?? Also been thinking about buying an Epson ET 15000, and putting in sublimation CosmoInk in it, to do the larger sizes.. Will it print the same quality as the Sawgrass?? What are your thoughts please..

[@ala4257]

You are awesome, thank you❤

[@judyblaise1639]

Great video. Thank you for doing this

[@smileyscreations5613]

Awesome work

[@DesignBundles]

Thank you for your kind words!

[@leighshell1784]

Great tutorial, girl!

[@user-dy9kx8my6r]

Hi there! This helped me so much, but I feel like I missed what you used the spray tacky stuff on?? And if use like regular scotch tape to hold design together on back would it hurt my design I’m pressing?

[@meghanfreeman5466]

Would love to know how you can do this for a round sign. 12”

[@dlee1018]

Great video!

[@francesdonohue3106]

I love the video. How and where did you use the krylon easy tack? On the flag, on the paper?

[@lindaseel9067]

GREAT VIDEO was wondering if you sprayed the easy tack to the flag or sublimation paper?

[@DesignBundles]

Hi Linda! Thank you so much! We didn't and sublimated right to the flag - Dawn

[@snoopyfanno1]

When I stick pieces together I get white patches where the heat tape goes

[@smileyscreations5613]

I love watching your videos what is the tacky spray for plz

[@DesignBundles]

Hi there! The spray can be found here: amzn.to/3xhSOU5

[@user-bh8ro6yf4p]

How can I print a 30oz image measuring 9.24 x 10 that is the exact tumbler size? Is there a way to show how to do a 30 oz tumbler? I would greatly appreciate it. I am new to sublimation and have a Sawgrass SG500.

[@Theresa914]

What a great tutorial, i can see where this would come in handy for lots of projects. Can it be done in silhouette studio?

[@heatherferguson6457]

How do you do this without getting the line from the overlapping

[@sheryl3462]

I have been trying g to make a garden flag using a smaller printer overlapping the design on 4 pages of 8.5x11. The colors come out great but I am getting lines showing the edge of the top pages. I am using a 15x15 heat press, I've tried light pressure and heavy pressure. I have even flipped the pages over once connected and carefully using a scrapper tool cut into the back like you do on a tumbler to help hide the seam. Nothing I working. Any suggestions?

[@georgia2015]

Awesome

[@wendywaterman1985]

I can’t seem to make anything using this software larger than that 8” square.

[@angelicapheng4911]

Can’t we tape it down more with more tape so it hold design together?

[@rushforhomes]

How can this be done thru design mate?

[@nancygerbasio1166]

Have you tried sublimating on any glass products yet?

[@olivia8979]

It isn't that I have no interest in sublimation ... but wow. I went back and looked at around the last 30 videos on this channel and all but three were about sublimation.

[@carpentersization]

Funny I asked this question on another video yesterday….how do this on epson and different software like the silhouette. Can u?

[@t.c6698]

So I have and pay for cricut design studio. do you recommend paying for the premium version of sawgrass or would you say that you could get away with uploading on the free portion of the sawgrass software?

[@darleneroach2848]

Hi Becky how long do the inks last for this printer and how does the print quality compare to the Epson et 1500?

[@evacisneros614]

Great video , I’ve had the sawgrass for a while, I’m curious to know if any recommendations if I’m doing something wrong when I press design on polyester shirt the black is opaque not vibrant black I’m using A sub paper. Any advice ?

[@elizabeththomas9723]

Can you do this same thing to print on 12 inch metal circle. I make wreaths and dont want to keep buying metal signs. I want to create my own

[@DesignBundles]

Hi Elizabeth! Are you looking to sublimate on the metal circle? If you can, please send more information to [e-mail] and we can better assist! - Dawn

[@kensmother1652]

Do you use a special ink for this project when you print on your Epson?

[@forestpkguy]

what's the back look like with bleed threw ????

[@moniquestrahan2477]

Hello Jennifer, thanks so much for this video. How do you slice images on a sawgrass 1000? For large images ?

[@DesignBundles]

Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to [e-mail] or join us in a live chat so we can help with your next project! - Brittany

[@theleros3069]

Hi,i just wanna ask, i tried to trace a bench but, the traces only traceable the in between the wood,which is the part supposedly to cut out,but the trace kept that part and trace the whole bench to cut out,which the part i wanted to stay...can you help me😭

[@kelleylarkin2174]

Help! I keep getting lines of the overlap paper in my designs while doing this method onto Easysubli. I have been using medium pressure as per the directions of Easysubli, and I wonder if this is the problem.Any suggestions?

[@DesignBundles]

HI Kelley! You may want to have the design cut exactly without any overlap! - Dawn

[@evierose10ny]

I was wondering would this be same method if I wanted to create an all over shirt design to press?

[@DesignBundles]

Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to [e-mail] or join us in a live chat so we can help with your next project! - Brittany

[@laurasandy4479]

I like that there is a workaround, but is there a way to do it without using so much expensive ink?

[@DesignBundles]

Hey Laura! I think that depends on the size of the design you are using!

[@sworley1956]

@@DesignBundles buy the larger tray

[@rebeccamcallister8038]

Thanks…I was think there should be a way to enlarge with my Sawgrass 500. Now I don’t have to burn the brain cells to figure out!

[@DesignBundles]

Happy to help! 😊

[@nellyberrios1306]

Can I use offset with the Sawgrass 500?

[@DesignBundles]

Hi there! Yes, you can! It's under Appearance and then Stroke! The video for that can be found here: kzbin.info/www/bejne/nKqQl4t-o8uYo7s - Dawn

[@nancygerbasio1166]

Can you print 11 x 17 on Sawgrass 500 printer?

[@DesignBundles]

You cannot, the widest it can print is 8.5"

[@estelagamboa4591]

Can this method be used when making a shirt?

[@DesignBundles]

Yes, absolutely!

[@estelagamboa4591]

@@DesignBundles thank you

[@TinamareeJ]

Hi will this work on a sawgrass sg400 printer

[@DesignBundles]

Yes, it is the same concept. - Brittany

[@wendywaterman1985]

It won’t even let me change mine to 8.5x11. I can’t hit create. What am I doing wrong?

[@DesignBundles]

Hi Wendy! I saw your other posts and I'm glad it worked out! - Dawn

[@linneirinnilsensolheim604]

I have a sawgrass sg500, it hasnt been used for almost a year, what sholuld I do noe that I want to start using it?

[@DesignBundles]

Has it been plugged in and on? If so, not to worry it's been doing it's own little maintenance process the whole time! If it hasn't I would recommend doing a print head cleaning.

[@linneirinnilsensolheim604]

@@DesignBundles it hasnt been on and off, then I Will try cleaning and sees what happens :)

[@sworley1956]

I rather purchase the 13x19 paper tray

[@DesignBundles]

Hey Sharon! What has been your experience with the larger tray? We would love to hear your feedback.

[@sworley1956]

@@DesignBundles Wouldn't trade it for the world it's very easy to use no slicing involved

[@wendywaterman1985]

Omg nvm lol I wasn’t changing it to inches. 🤣🤦🏼‍♀️

[@Just-a-girl]

Not sure where you went but miss your face😢

[@carpentersization]

Sorry newbie