How to create macOS Bootable usb drive on Windows 2024 | Make Mac OS X bootable USB on Windows 11

[@MzLearning]

🔥🔥👉 Important Note 🔥🔥👈 Please Watch this New and improved Method for creating full offline macOS bootable usb drive on windows 🔥🔥👉 kzbin.info/www/bejne/nXTJqZSjpJKjq6c 🔥🔥👈 This method works on all Mac Operating Systems from Mac OS X Lion to macOS Sonoma All Error fix like Low disk Space error act act Best of luck and please subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@mgidla]

I am quiet happy and defenately assisted by your video, I cancelled my Apple Appointment in Eastgate, Gauteng, South Africa after watching and following your video

[@alvarochauque9744]

Hi @MZLearning I'm getting error 403 forbidden when I try to install El Captain after logging in to my iCloud

[@svengroen7166]

Thanks, bro! This video tutorial works, but the problem where I was stuck for a couple of hours was the storage problem (even after resizing the partition). The fix: Restart the computer and remove the USB. When the computer turns back on, plug the USB back in and go to the partition resize program. Now the USB is in 2 partitions again (even if you changed it to one before the restart). Drag the left partition over the full capacity of the USB and run the program. Now the USB is back in one partition! Now you can go to the Transmac program and place the package folder in the installation folder. I hope this will work for some of you too :).

[@Lifestyleonproject]

Thanks a million for posting this!!! Had the same problem and could not figure it out, now it works. Thanks Bro!

[@hareitarcilla6161]

thank you very much bro! It works :D

[@jaskulskimedia2056]

thx

[@ElanoDallmeyer]

If you're getting the Size error, Start from the beginning of TransMac / USB setup and immediately after restoring from the OS file, run the partition manager program then continue as intended. Worked for me.

[@madrakionman]

Thanks, Bro. Save my life.

[@AbdelrahmanEhab-j6i]

Thanks Man ❤🎉

[@rezkifabilla-lw2dr]

where can i run the partition manager program?

[@gsquirrel1101]

yep, after diskpart done open TransMac, format flash for Mac, then recover BaseSystem.dmg and right after that run partition manager. Tested, that working fine and no more size error.

[@singsilva6126]

You are god👌

[@suryapratapchauhan4354]

If there issue in copying files just try it. In transmac - format disk for mac- -Restore basesystem.dmg in to disk. -Then increase the partition size using paragon Hard disc manager. - copy these three files and package files which shown in video. If error occurred in copying files then just leave the transmac and -go to this pc -- usb flash drive (making for bootable) -- copy and paste same files on same destination as shown in video and rename the icon file there -- then go to refresh drive list by right clicking on left side in transmac There you will see all files. And done..

[@pengidev4553]

Thank you!!! This worked for my issue!

[@iqbalkhan2813]

thank youuu! it's solved my problem!!

[@PouriaHasanpour]

Thanksss❤❤❤❤

[@dmitriiovsiannikov9605]

thank you! It halps me too

[@The.Prof1]

How to do that while the USB is already not read normally and you can't access the file?!

[@logansimpson5501]

finally got it to work 🎉 if having trouble copying packages folder close out of transmac then go to paragon then go back to transmac and copy again

[@_AverageJ]

THIS COMMENT! if youre having the space issue do this it worked for me

[@yukselp]

If you can't resize partition like me: Start from beginning, format USB disc and do everything until 9:00 . Then exit programs and start Paragon or another partititon tool. After that I was able to resize firts partition.

[@thembelanimlala317]

Your simplicity in all your explanations makes all things so easier, thanks a lot 🙏

[@MzLearning]

So nice of you sir 🥰😍 Thanks for watching have a nice day

[@Rez2003]

I've spent the last 5 days trying to fix my iMac, every tutorial I've tried always failed. I followed yours step by step and it work first time! Absolute life saver. Liked and subscribed because you deserve it! Thank you.

[@MzLearning]

You're welcome!

[@john2001plus]

This is the third video in this series that I have tried and the only one that worked for me. However, my first pass failed, so thinking that something went wrong, I went through the entire process a second time and it worked. I did have a problem with the Apple account login during the install, which I could not get to work, so I chose to skip the login. So thank you. Now I am updating to Ventura. After this, the next step will be to install Boot Camp and restore my files.

[@KuzyOfficial]

thx so u can just update

[@secuthor2372]

08:21 Destination volume does not appear have enough free space. (additional 441Mb required) (32Gb USB)

[@plays2642]

Same for me

[@baloghdave123]

Thank You! I have succesfully created the drive with El Capitan for my 2007 iMac, but when i chose it to boot from USB it stuck forever at the apple logo with 100% progress bar. Any solution?

[@viperdio69420]

It say could not write to disk SptilF::Spti blah blah blah when trying to copy the base system dmg install icons and chunk list file

[@SakyBoy]

Hi, hope you'll notice. Im trying your method but unfortunately when I try to copy the packages folder I still get not enough space even though I already extended it using paragon software. Hope you can help me resolve the issue. Thank you more power

[@hammabsd]

same here

[@chrma_]

If you cant copy the files over because transmac says you dont have enough space. Try to restart your pc with the disk inside after installing the paragon Hard Disk Manager. From here, try all the steps in order again without skipping. If that still doesnt work, like me, then try installing HFS+ for windows by paragon software. I installed the trial version. Reset pc again. After the reset, i immediately opened CMD and did all the steps to prepare the drive, then opened transmac, format for mac, and then restore from that same base system file. After this i went to file explorer and i could see the drive and interact with it as if it were a normal usb, and i could follow all the steps, even resizing the partition in the hard disk manager. If youre stuck, hope this helps. If it doesnt, hopefully you find a different solution soon.

[@d2ferrao]

Man...! I do never ever follow anything or anyone on KZbin and I do never like videos. But this video/tutorial made me think this is the only way I can thank you and I know this is not enough. Thank you so much. It perfectly works! I only needed as some people suggested to reboot my Windows PC to make the USB appear on Paragon after the "not enough space" window. Thank you!

[@ckarcher]

Unbelievable!!! Thank you so much for this video. After days and days of frustration, I managed to install HighSierra again on an old Mac Mini. You're a star!!!!

[@MzLearning]

You're welcome sir if possible please share this video its a humble request please subscribe for more useful videos like this Thanks for watching have a nice day 😊

[@mooninhaedimmy]

i have a mac mini 2011, but this method does not work for me, i try exactly as this video, did you do anything different?

[@MzLearning]

I apologize for reading your comment late. That is why I provided my personal email in the "About" section of this channel. [e-mail] Please email me your error message, and don't worry, I will help you restore the Mac operating system on your Mac Mini 2011.

[@Drbehroz]

I watch full video without skip I fix my flash with paragon hard disk manager but again say you not have enough space my flash 256GB can you tell me what should I do for this

[@ictrlaltdeleteu]

Thanks this worked for me, to fix the no space on mac error, RIGHT AFTER you restore image to your usb drive, partition the usb with paragon and then drag and drop the files into the drive. it worked for me hopefully it works for you

[@THEOAKLANDBABY510]

Thanks! Frustrating having to restart the whole thing to get it right but whatever works, works.

[@THEOAKLANDBABY510]

@@anonym-bd1jp so when you format the usb as readable when you try to boot from it, you must not disconnect it or anything because it will corrupt files and you have to restart over. I recommend making SURE you don't have your t2 chip Mac or firewall porevenntionn fromm letting you boot Fromm usb.

[@karenandresa5902]

I can’t even believe this actually worked after I’ve tried different methods the past 3 days. Thank you so much!

[@MzLearning]

You're welcome! my channel is all about macOS and I.T & i never post any fake video on my channel. I would highly appreciate if you subscribe my channel for more useful videos like this Thanks for watching have a nice day

[@vvampire228]

when I'm copying 8:11 ,it shows error { could not write to disk : SptilF : SptiWrite : status = 0 , sec_size=1, sec_count=30720000 fsec=94416, nsec=1.io_error=5 } help plz I need my system to run ASAP plz

[@MegaAvijitdey]

same

[@MegaAvijitdey]

directly copy in same folder shows in video.its helped me

[@decondeghet]

same. Plz help

[@tyssondykes8585]

I just went into paragon and moved the partition, then after i was able to copy those files over without that error

[@vantu001]

Hello, I have a problem, I followed all the steps in the video and when I enter the comparison program, the USB partition shows me Unallocated and does not give me the first partition where the files were copied

[@ziadmohamed4593]

That because windows can read ntfx file format but you can do All step no problems

[@nabeelandcomputers]

When I try to copy files , it show not enough space even usb is 32 or 64gb , so while copying base.dmg file. icon file and chunklist file, it show not enough space error , how to fix this

[@BruhTesheme]

I've spent the last 5 days trying to fix my iMac, every tutorial I've tried always failed. I followed yours step by step and it work first time! Absolute life saver. Liked and subscribed because you deserve it! Thank you. you are genius we need such contributor generation.

[@MzLearning]

You're most welcome please Watch this New and improved Method for creating full offline macOS bootable usb drive on windows 🔥🔥👉 kzbin.info/www/bejne/nXTJqZSjpJKjq6c 🔥🔥👈 This method works on all Mac Operating Systems from Mac OS X Lion to macOS Sonoma All Error fix like Low disk Space error act act Best of luck and please subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@ahesanalisuthar2015]

This video really helped me. After resizing with paragon use HFS+ software and copy from windows explorer. This way was able to copy files for packages folder. Thank you very much for creating a nice guide.

[@MzLearning]

You are always most welcome AhesanAli Suthar Please subscribe for more useful videos like this Thanks for watching have a nice day

[@ElRaton28]

Bro thank you so much I couldn't use my mac for 5 days straight and this was the only way to solve it

[@AbrahamMusalem]

You are a freaking wizard. This worked like a charm on an 2010 Imac after trying so many other things. Thank you!

[@MzLearning]

You're welcome! please subscribe for more useful videos like this Thank you so much for watching have a nice day 😊

[@AdarshX23]

I just installed the Mountain Lion and as per your suggestion, I've tried to install Sierra and woohoo 🎉, this method worked like a charm as well!!

[@MzLearning]

Great to hear! Please subscribe for more useful videos like this also if possible please share this video for our motivation Thanks for watching have a nice day

[@Ronakhussain1]

no enough space on mac volume error show, and i can't to solve it when i was trying to solve this issue with paragon hard disk manager ...please tell me how to solve this issue

[@AkhKashur0]

Happened to me! Just close the trans mac and remove your USB disk then insert again, open trans mac and copy the package folder ..done

[@rishabgupta3583]

@@AkhKashur0 not working.. I tried to do the same you instructed but its still shows "Destination volume does not appear to have enough free space". I am using 64GB Pendrive out of which 57+GB is still available as shown in Paragon Manager.

[@Proud-Papa]

@@rishabgupta3583 click on the installation folder and then click on the white area to deselect it. After that drag and drop the packages folder.

[@henrinatorbo9422]

Still not working

[@mikoillobouniaminou390]

Hi, i've tried step by step and created the bootable USB drive but during installation, only the bootable usb drive is shown to be selected for the installation. I have a MacBook Pro 2010 , a working bootcamp windows11 installed on the HD and the install dmg downloaded is Sierra 10.12. Thanks

[@rahulguha4597]

Cannot proceed after 8:04. getting spliff error on transmac software. help/guidance needed

[@marcell8309]

for everyone whos struggling to get rid of the no space message, simply reboot with the flash attached . i personaly do this as soon as i restore with base image as that creates a 2gb max partiton then the rest

[@rezkifabilla-lw2dr]

so you didnt go with the rest of copying file step like the video did?

[@marcell8309]

no because what she doesn't tell u that ull get an error message for not enought space@@rezkifabilla-lw2dr

[@logansimpson5501]

it says could not write to Mac volume when i’m copying the package folder someone Help pls

[@iamdickel8574]

same problem.. did you solve yours?

[@viperdio69420]

You have to format for Mac on trans Mac

[@kelvinyap4268]

Pls help me i been stuck on storage part it have no option to drag make the storage bigger

[@MzLearning]

Watch this new method for creating Mac OS bootable usb drive on windows ( all errors fix in this video ) kzbin.info/www/bejne/nXTJqZSjpJKjq6c This method works on all mac operating systems

[@figureitoutpunk]

Just a quick note to everyone, the latest version of transmac when "restoring drive" from basesystem step, has a checkbox to expand the drive, select this when restoring the drive and you will not have to expand the drive out (it says "experimental" but it works). Great video, life saver this was a nightmare before this.

[@MzLearning]

Thanks please Watch this New and improved Method for creating full offline macOS bootable usb drive on windows 🔥🔥👉 kzbin.info/www/bejne/nXTJqZSjpJKjq6c 🔥🔥👈 This method works on all Mac Operating Systems from Mac OS X Lion to macOS Sonoma All Error fix like Low disk Space error act act Best of luck and please subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@ChannelGua]

Im restore disk from transmac, my disk changes to pkg, and then am plug my flashdisk to the macbook, is not found😢

[@arslanbali]

Thank you soo much. I had formatted my hard drive because I was going to selling my macbook pro, I ended up fucking it up and drive nothing would show up, even the recovery thing failed and it wasnt giving me anything. A "technician" said I needed a new SSD and that was out of my budget as I was already selling it due to financial reasons. This tutorial saved my ass and helped my sell my macbook for a decent price. Thank you again.

[@MzLearning]

I am so happy for you and you are always most welcome please share this video for my support. Your support will be highly appreciated 😍🥰Thanks for watching. Have a nice day.

[@sweeeeeetch]

if you have the problem of “ an error occured loading the update “ this tutorial is going to save your mac ! Who ever did this tutorial, i wanna thank you from the bottom of my heart! Literally saved my mac after almost a week of searching and tries!!

[@MzLearning]

@@sweeeeeetch you are always most welcome. Please share this video for my motivation and support your support will be highly appreciated. Please subscribe to the channel for more useful videos like this. Thanks for watching. Have a nice day.

[@MzLearning]

🔥🔥👉 Important Note 🔥🔥👈 Please Watch this New and improved Method kzbin.info/www/bejne/nXTJqZSjpJKjq6c This method works on all Mac Operating Systems from Mac OS X Lion to macOS Sonoma All Error fix like Low disk Space error act act Best of luck and please subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@ullaskunder]

Hello, I am using fedora linux for creating bootable usb, so far done now I using "parted" now asking for file type what should I enter "sudo parted /dev/sdb", => "File system type? [ext2]?"

[@richardteoxon5034]

is this can use for windows dual boot ?

[@Dan-km8je]

please help, I followed everything exactly, but every time, after I resize the volume with Paragon Hard Disk Manager, I can't copy files to the flash drive nymore. I keep getting this error: "Could not write to disk: SptilF::SptiWrite16: status=0, spd.arb.ScsiStatus=0, sec_size=1, sec_count=9767475200 fsec=94416, nsec=1, io_error=5" please help 🙏🙏🙏🙏🙏🙏

[@obitouchiha-uy5qt]

Got the same thing

[@Acespeed88]

i facing issue when restore image using transmac this step, my usb drive become mbr partition, don't know why

[@ebenezergasonoo4354]

somehow Transmac converts my already GPT drive to MBR so i cant extend it

[@nick6979]

same here...

[@LetsBanLifeAlert]

My fix for this was as soon as you restore with disk image, I opened paragon and adjusted the slider to about 15 gb. After doing this I right clicked the usb in transmac and clicked properties and saw it changed from like 2 gigs to be 15. At least that’s what worked for me and hopefully some playing with this method helps you!

[@kalammuslimku7788]

​@@LetsBanLifeAlert please help cant copy 3 file not enough space. In paragon showing mbr basic cant drag anyway

[@Berre_Cardiac]

are not there any alternatives to paragon software pls help

[@TheNa360]

I've been struggling for two days at this point. You did it! thank you!

[@MzLearning]

You're so welcome! Please subscribe for more useful videos like this Thanks for watching have a nice day

[@simon2e0sia95]

hi followed this to the letter i am on windows 11 when it gets to the part not enough space tried paragon it just sits there formatting to extend the drive can you suggest anoer programe that will do so

[@ciuffyeu]

I think i am doing something wrong after i select the boot drive when i restart the mac my laptop goes into recovery mode not sure what i am doing wrong. After the loading screen of internet recovery the apple logo appears and it's loading i am getting prompted to select startup disk and restart. After restarting i am getting logo screen, after that i get the install macos sierra i click on Continue and i am getting an error "the recovery server could not be contacted"

[@driantv0828]

does the paragon:resizing partition takes a lot of time??? please help

[@Celynzombi]

Update: tried following the steps again idk what I missed but it worked ty! Anyone got a “ 🚫 “ ? After the OS install into Mac?

[@necaz.700]

Thanks for the guide, so for everyone who have problems that i had. If u unistalled ur system macOS and u cant install new one because u cant sign in to Apple store (cuz of servises, error 403, etc) this method with usb stick works, cuz when u need to restore disk i mean macOS for boot, just check the box for expanding size.

[@necaz.700]

i was stuck on laptop without system and without option to continue to instal via apple sto cuz i have older macbook pro from 2010

[@lisajones1036]

Hi I have followed all the steps 3 times but each time after booting I get the message This disk doesn’t use the GUID Partition scheme. When I follow the instructions to select disk-partition select volume Scheme it isn’t listed. What should I do now? Thank you

[@ducatisandmonsters5800]

This took a long time and work but it was worth it. Out of all the other videos I watched, this was the only one that worked. Thank you for the video

[@MzLearning]

Thank ☺️ Please subscribe for more useful videos like this. If possible, please share this video for our support. Your support will be highly appreciated. Thanks for watching have a nice day

[@Lufemn]

Perfect tutorial, only one important tip: after using paragon hard disk manager, you have to close transmac and open again, otherwise it will not update free space from disk.

[@MzLearning]

Thanks & very nice tip. I already mention this on my new video kzbin.info/www/bejne/nXTJqZSjpJKjq6c also i make the same method more easier on this new video if you have time please take a look Please share this video for my motivation and subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@2broke2boost38]

Someone please help Mee I can’t get the Essentials.Pkg file to the packages it’s always saying that the is not enough space on the volume please help I tried everything nothing is working

[@henrinatorbo9422]

Hey did you get help. I’m having the same issue.

[@2broke2boost38]

@@henrinatorbo9422 no i dident I just ended up ordering a usb bootable from eBay

[@henrinatorbo9422]

@@2broke2boost38 did that work for you?

[@2broke2boost38]

@@henrinatorbo9422 yes

[@narkarkoustubh]

hi how do i download and make bootabe usb for High sierra as i only have windows pc and my mac A1466 is dead and i am not able to install online.

[@EngrMubasharAli]

thank you it's working 100% but with little changes file copy in the software shows an error then I copy without the software just copy files and past in Usd flils

[@RicoChico-xr2ls]

After pushing install for Mountain Lion 10.8, i get stuck at "a required download is missing. Followed all instructions to the tee. Am i missing something. PLZ help.

[@MzLearning]

kzbin.info/www/bejne/nXTJqZSjpJKjq6c

[@glennmirabueno535]

I just upgraded SSD and RAM on my MBP late 2011 and restored into Mac Os X Lion. Can I upgrade it using this method / guide? I cant browse using safari and most application are not working😢 on Mac Os X Lion..please help if this process will solve it.

[@MzLearning]

yes sir you can upgrade using this method for more useful videos like this please subscribe the channel Thanks for watching have a nice day

[@imamrisnandar4572]

Whether this guide suitable for Macbook Air M1? using OS X ?

[@MzLearning]

very soon i upload a video for M1 mac on same topic so please keep in touch and subscribe the channel Thanks for watching have a nice day 😊

[@DerpShroom]

Please help me i tried 2 different usbs following all u do i get the size error and i have only 1 partition in the program showing intried unpplugging and plugging back in, restarting pc nothing helps it 1 usb is 16gb the other is 32 gb

[@MzLearning]

[e-mail] please contact

[@s4bu]

I have a issue. The error on 9:14 keeps repeating even after doing the Paragon method. Can you please help?

[@MzLearning]

Yes Watch this kzbin.info/www/bejne/nXTJqZSjpJKjq6c

[@tommy8716]

Thank you, this actually worked for me with OSX Lion. The only thing I did differently was TransMac had the option to extend the image to the entire drive after trying to restore it, so you wouldn't need to expand it later. It said it was in beta, but it worked perfect for me.

[@MzLearning]

You're most welcome please Watch this New and improved Method for creating full offline macOS bootable usb drive on windows 🔥🔥👉 kzbin.info/www/bejne/nXTJqZSjpJKjq6c 🔥🔥👈 This method works on all Mac Operating Systems from Mac OS X Lion to macOS Sonoma All Error fix like Low disk Space error act act Best of luck and please subscribe to the channel for more useful videos like this Thanks for watching have a nice day

[@digitizernz]

Seems I have hit another hurdle. Trying to boot from the newly created USB drive but the process only gets to the apple logo and the progress bar apparently at 100% and nothing happens. Any thoughts? UPDATE - 31/7/23 Re did the process and it installed ok

[@teamanomalous6037]

Is the process the same with the Monterey google drive files ? I notice 2 seperate files in the zip download

[@irvingaray6784]

Transmac wont let me rename the file or copy the Packages forlder. HELP

[@DavFx7]

Hello my transmac "copy here" option is greyed out and i can't click copy here i have repeated the process but still greyed any help pliz Mrs😢😢

[@SaqibIlyas-i6m]

I tried resizing the partition in Paragon Hard Disk Manager after restoring from InstallESD.dmg. But, Paragon Hard Disk Manager didn't recognize the partition. I installed HFS+ as well, but no use. Suggestions?

[@Faiz.Shaikh2616]

worked for me thanks ☺

[@TobiDelacruz-l5l]

can u please help because the copy here option not showing up* im in the process of copying the 3 files

[@KefoxNWOKO]

Wow!!!!! I have been struggling with this for over a week. have spent sleepless nights and work hours trying to fix this! You are the best.

[@MzLearning]

Thanks! I would highly appreciate if you subscribe my channel for more useful videos like this Thanks for watching have a nice day

[@WiKiTWoNKaWeCKoRDS]

can't get passed the "not enough space" error and my flash drive is 128 GB (119GB) Way more than enough... is it maybe because its a USB 3.0 thumb drive?

[@Bozito]

even after the hard disk manager, I.m receiving the message of not enough space Edit. I used the Hard Disk manager again right after the transmac and it worked

[@Cuniao49]

As suggested by you, I tried this procedure, and didn't work for me. I keep getting a message when copying InstallAssistan.icns, Base System.dmg, BaseSystem.chunk on TransMac 14.8 "Could not write to disk: SptiLF:::SptiWrite: status=0, spd.srb.SCSiStatus=0, sec_size=1, sec_count=60088320 fsec=94416, nsec=1, io_error=5

[@bilalvlogs5770]

Am facing Same error what can i do now?

[@achuransom303]

thanks very much for the assistance bro but I have a problem copying it into the BASE SYSTEM folder in Transmac. There is an error message that says "could not read from disk" please i need your help

[@MzLearning]

It seems like there is a bug in Transmac. Please don't worry and email me at [e-mail] for personal assistance & for quick reply i will help you It would be helpful if you could provide some additional information. Specifically, please let me know the following details: which operating system you are creating a bootable USB for, where you downloaded that operating system from, you are using a USB drive or a USB hard drive? and what specific issue or problem you are currently experiencing. Thank you! Thanks for watching have a nice day

[@Jenndoesblonde]

I’m stuck on the “There is not enough space” error because it keeps telling me I’m trying to download a 64-bit on a 32-bit when downloading paragon. Even when it’s telling me I’m downloading the 32-hit version. Please help

[@Jenndoesblonde]

Never mind! I was reading it wrong lol I think it worked! I’ll know after I try to install it on my Mac. Thank you

[@MzLearning]

this method works 110% just follow the video instructions 100% anything els please feel free contact me at [e-mail] for quick reply Thanks

[@plgb2]

Thanks for that video! When I select the USB Bootable Drive on my Mac it shows up a gray forbiden sign, and it turns off the macbook. What can it be?

[@lowfidelitymusic-king]

Copy packege after 😢😢 Destination volume doesn't appear have enough free space, Please help, 16gb my memory card

[@rgbAiQ]

What do you use for AI voice? Please tell me

[@mmanews2881]

Does it works without efi folder ???

[@MrApmananadewa]

very useful video. Even I'm not familiar with mac Os.my office one old mac book air wanted to format and install mac os fresh copy.so I followed your video and job done. I don't have to words for Thanks to you. Thank you so much.

[@techcrossx]

While uploading the packages folder into Transmac USB getting error " could not write to MAC volume " @MzLearning

[@kemar29]

Copy them directly on the usb drive

[@iamjohnnycox2373]

Hi, can you do this same method for Mac OS High Sierra for Macbook 2011 A1286 model?

[@Celynzombi]

Would it not be the same??

[@stevenshrewsbury247]

This video finally helped me get my macbook working after hours of trying other solutions. Earned yourself a subscriber my dude keep up the good work

[@MzLearning]

Thanks for the sub!🥰

[@thanhnguyenuc2782]

hi bro, can i ask reason why my usb drive alway have 1.8Gb when format. I don't have enough capacity for step copy "Packages" from pc to USB. please help me.

[@MzLearning]

All your questions will be answered in this new video kzbin.info/www/bejne/nXTJqZSjpJKjq6c

[@kyreeflores6918]

thanks.. it works for me. i subscribed already. keep on uploading videos to help people whos looking for solutions on youtube. thank you

[@danielpanaligan9223]

Good day..im having problem..after the transmac restore the disk image..usb change to mbr..the primary partition and unallocated space will become single partition and a mbr format..

[@nope692]

same problem here

[@sheeisenbergh]

Thanks bro, This video works especially for Macbook Pro 2011 or older with CD/DVD boot only and not supporting USB boot. Thanks alot

[@andreahawkins5890]

I can't copy files to TransMac!! It says " could not write to disk " when I right click and choose copy here to select the three files from EDS folder. ANY SOULTION???? NOTE: I already run it as administrator and I use the same ver in video v14.7

[@MzLearning]

Andrea hawkins please don't worry I am here to help Please follow the video instructions step by step Just close the TransMac and remove your USB disk then insert it again, open trans mac and copy if it's not work then formate your USB drive then make it one partition as shown in the video then copy all the files

[@adan2343]

No matter what I do to the resize on paragon, stil says could not write on mac, any ideas?

[@MzLearning]

it's impossible. i am sorry to say but i think you must done something wrong because these method is well tested and works 110% by the way i am out of country after comeback i make another video for you on this topic

[@BRedFilms]

The only video that is accurate anymore! Thank you thank you thank you!

[@aarifahmed8671]

I couldn't find two partitions inside my USB flash drive after doing all these steps,it shows short of space on Mac volume

[@tifdarwil]

Thank you new friend. This is the method that actually worked on my computer. No one else's method worked.

[@MzLearning]

Welcome 👍 Please subscribe for more useful videos like this Thanks for watching have a nice day

[@shaksooon]

please, im begging you help me with this: i have a MacBook pro 2011 and trying to install mac os sierra, with no luck, system has been wiped on it and now im stuck without any solution. I only have a MacBook Air M1 and a Windows PC; everything I have tried from them has finished without any luck.

[@MzLearning]

Please don’t worry; I’m here to help! Watch this video if you want to create a macOS Sierra bootable USB drive on a Mac: kzbin.info/www/bejne/j6mWl6eJaJV0irujr If you’re on Windows, you can use this new method: kzbin.info/www/bejne/j6mWl6eJaJV0irujr This version makes the instructions and links easier to follow. Let me know if you’d like any further tweaks!

[@mujeebmobilezone8630]

i tryed many time to creat partition 64 gb usb drive but i face same issue not enough space

[@onlyfornaturelover99]

Is 14 gb pendrive are enough for this bootable process.

[@navymax4466]

guys, when i do this step "restore the disk image" the USB change automatically from GPT to MBR therefore i can't fix the size using Paragon HDM. thus i face the size issue. please help! .

[@nope692]

same problem with the partitioning

[@SievertsFitness]

i tried convert to gpt and this shows of disk is in mbr formart choose an empty disk ?

[@MzLearning]

Please try this easy method kzbin.info/www/bejne/nXTJqZSjpJKjq6c

[@EmanBrionesVilla]

When I try to resize in paragon it says error file systems has allocation errors due to cross linked files help

[@MzLearning]

Some users encounter errors but don't worry, I have created a new video to help fix them all. Check it out at kzbin.info/www/bejne/nXTJqZSjpJKjq6cfeature=shared. Best of luck!

[@yohanperera21]

Hello, why’s it saying not enough space on Mac volume? I used 64GB usb. Could you please give me a solution for this? Thanks

[@andreasjohansson1952]

It's literally in the video.

[@jandrejansen-u6g]

Will this also work if i want to mak my windows leptop a mac

[@Chullo987returns]

I have a little problem it seems like my USB drive is not bootable or not detectable on my BOIS please help!