Drill Holes in Glass Easily ● Wine Bottles, Mason Jars ( in under a minute ! )

USA
● Hole Cutters .... amzn.to/3HQ74cd
● Spade Drill Bits .... amzn.to/32Udjr4
● My Great Little Cordless Drill .... amzn.to/4d3c1hK
CANADA
● Hole Cutters .... amzn.to/2R1unZH
● Spade Drill Bits .... amzn.to/2JeGHOt
● My Great Little Cordless Drill .... amzn.to/49A7TmE (without Battery)
Drilling holes in glass bottles, mason jars, wine bottles, flower vases and coffee mugs is way easier than you think! These cheap glass cutting bits makes it super easy and quick to do. Drilling glass can take forever if you have the wrong bit and the glass can shatter if you use too much pressure. If you're making a lamp, this method makes cutting holes in your glass bottle a breeze. You can cut holes in glass in less than 60 seconds with these bits.
When cutting glass, be sure to wear safety glasses and gloves.
These bits will NOT cut tempered glass.
Use a cordless drill if possible.
Electric drills are fine using caution.
MY STORE
● www.amazon.com/shop/chrisnotap
● www.amazon.ca/shop/chrisnotap
Full Transparency! A small portion of each sale goes from Amazon's pocket to my pocket with no additional cost to you! Thanks for your support. It's very much appreciated!

[@chrisnotap]

I found the same bits I used in this video on Amazon! Still a great price and you get them way way faster. Ebay takes far too long! USA ● Hole Cutters .... amzn.to/3HQ74cd ● Spade Drill Bits .... amzn.to/32Udjr4 ● My Great Little Cordless Drill .... amzn.to/2PosTaw CANADA ● Hole Cutters .... amzn.to/2R1unZH ● Spade Drill Bits .... amzn.to/2JeGHOt ● My Great Little Cordless Drill .... amzn.to/2puSqQU Full Transparency! A small portion of each sale goes from Amazon's pocket to my pocket with no additional cost to you! Thanks for your support. It's very much appreciated!

[@EMERALDJAYNE]

You are so awesome you taught an old grandma how to make incense burners out of old wine bottles!!😂❤️ Thank you thank you thank you you're awesome! Who said you cannot teach an old dog new tricks🎉😂😂❤

[@andreaa5653]

Great tutorial! Any chance you have an updated link for the cordless drill you used? Thanks!

[@herbertvanrensburg6411]

If you are as lucky as me to live in South Africa ordering anything from e-bay or Amazon takes equally long to get here, between six to eight weeks, I sometimes wonder if they do not load the items on a rowing boat and send them here to save costs on airfreight?😋😋😉

[@topknotsrule]

The pop bottle water applicator alone deserves a "like"

[@proletariatpashka1956]

Pop bottle peeing on your set up to cool it off is awesome

[@CLUB-th7pp]

I drill windshields EVERYDAY. We use dental burrs.

[@wonderwend1]

I agree 100%

[@chapman9230]

Unless you have prostate issues….

[@topknotsrule]

@@chapman9230 🤣🤣🤣 sorry 😞

[@OdintheGermanShepherd]

“How to make a bong”

[@vyomkankeshwar3044]

yup! the funny part is hes aginst smoking lol

[@dildite4910]

beat me to it.

[@CS-en5xz]

Follow hole drilling technique then stick in a stem load it fill it light it. Enjoy the results

[@twindad6890]

Lmao right! Now I can finally make my own. When the wife asks where here nice flower vase went I'll just shrug and say " I dunno ."

[@hadara69]

Haha In the words of Tesla, "Let's toke about it..."

[@BlueSkyBonsai]

Not only was this a great tutorial for holes in glass, but also a great demonstation of a how to make a short instructional video for KZbin 👍🏻

[@chrisnotap]

Glad it was helpful! try to get right to the point with all of my videos! Thanks for that feedback!

[@georgepagakis9854]

Amen to that :)

[@Mike61259]

@@georgepagakis9854 Nice job buddy. I believe It would help if we have water in the bottle...

[@wonderwend1]

I agree. No faffing about showing a dozen 'you need' items that we can see you use anyway

[@ChrisMelville]

Perfect instructional video. No faffing around, and straight to the point. Relatively rare these days!

[@Sionnach1601]

Watched this 4 years ago. Still enjoying it 4 years later. Fantastic job, the intelligence of the different techniques involved, the CLEAR presentation, the overall intelligence. It's just so satisfying to watch. Men like you should be running the country, honestly. 👏👏👏

[@chrisnotap]

Wow! Thanks for that great feedback!

[@Sionnach1601]

@@chrisnotap Good man 👍 Just lay off supporting and promoting the globalists who are ruining ordinary people's lives Bud 👍🙏

[@upthebutox]

This mans wife is gonna be pissed when she come home and there’s holes in all the dishes.

[@useyourheadpliz]

Almost my first thought too ;-)

[@Simmonique]

This man's wife has a hole in her hand 😂

[@-GyBer-]

wife or dishes, hole's a hole

[@RaimarLunardi]

So anyway, I kept drilling and kept drilling...

[@MirlitronOne]

And when she uses the vase...

[@sandienochs6132]

Before drilling the hole, cover the area with masking tape. This helps prevent chipping and should the glass break, it sticks to the tape rather than flying everywhere. This tip curtesy of Mister Natural.

[@luniqant9296]

Electrical tape is best imo

[@ThatGuyMata]

Won't prevent glass from chipping

[@WinkLinkletter]

"Twas Ever Thus." Mr. Natural?

[@ninja5672]

@Derek Hitt What is the wax for?

[@DrCarlosMusic]

After covering the area with masking tape do you still gotta keep it wet? I’m thinking the water is going to prevent the masking tape from sticking

[@mori8424]

You can also fill the hole saw with ice, it’s less messy. Put a piece of sticky tape on the back side of what you’re drilling and you will get less fraying around the edge of the hole on the back side.

[@unclemarksdiyauto]

Very interesting and informative Chris! I really like your water source! I never would have thought of using a plastic bottle in that way!

[@stclous]

Many bongs were built that day

[@Thatguy-cf9qj]

Jasmin Avdic What's your point?

[@danielleyva7881]

Lol 😁

[@larryscarr1929]

Bot bottles everywhere.... Tinny rocks cry..

[@friedchicken1]

whats the technology and the fluid dynamics behind the bong?

[@blackprince4074]

HI a bong is an water filed aid to cool the smoking of illegal substances.A bit like the Turkish Hubbly Bubbly.

[@LC-ue6mp]

Who else likes the soda bottle fountain idea?

[@thomastorres1323]

You can drill through the cap and it works also and I add coolant. Yes anti freeze

[@LC-ue6mp]

@@thomastorres1323 you one clever bunny so thank you

[@justinfielden2818]

I don’t like he fact that you called it ‘soda’ 😂😂😂🤣🤣🤣 just kidding Ohio is weird

[@mystfaex8794]

Been using it all my life, mostly 4 Work/Camp wash up station. Taught my kids & grandkids, my dad taught me. Basic physics stuff, but so neato!

[@mazdamatt7703]

Jaw dropped

[@karenbruce6749]

What an exceptionally well done video, every aspect of it was enjoyable, helpful, and inspiring. Thank you for your time and effort!

[@chrisnotap]

Thanks for that great feedback!!

[@johnharrison2511]

I agree. Fantastic video. Simple, Clever, Clear, really great. Thanks🙋😁

[@EMERALDJAYNE]

@@chrisnotap LOVE ❤️THIS TUTORIAL....even grandma's get it!! The idea of the pop bottle as the source of water is GENIIUS & cheap ♥️THX SO MUCH!! CAN'T WAIT TO WATCH THE REST OF YOUR VIDEOS🙏😎💋

[@memeguy7589]

As one wise man said: "If you have the drill, you can drill anything except the drill. If you have two drills, you can drill anything"

[@bobmarshall3700]

Mark Twain said; "Give a man a hammer and he is bound to find something that needs hammering". So logic dictates that in this household everything will have holes in it!

[@tvdinner325]

Wise indeed.

[@ASMRyouVEGANyet]

This made me laugh so damn hard

[@batintheattic7293]

I love that. I'm sure there's a metaphor in it, somewhere, but all I can think about is what it might be like to have two drills.

[@didarden]

😒

[@flarion00]

The thumbnail suggested that he would use a pickle to drill holes in glass. I'm so disappointed 🙃😆

[@Underbottom.Sandydown]

Brother.... that weren't no pickle.

[@renaudgagnon152]

That's why it made millions of views...

[@takix2007]

Instructions unclear. Instead I got my pickle trapped in a drilled glass jar.

[@marcuspetford1098]

If you can spin the pickle fast enough it will work.

[@skeetermcswagger0U812]

He doesn't use the pickle to a drill a hole he uses a pickle to scare the glass out of a specific spot which in turn produces a hole. I thought everybody knows that cats are afraid of cucumbers and glass is afraid of pickles, C' mon man!!!

[@TheNopyu]

Im more impressed with that water bottle idea

[@lifeisgoodenjoydaryd]

Was thinking the exact same thing. Excellent technique!!

[@harrygaul4475]

Drip, drip, drip

[@Blayze1017]

TheNopyu my 1st thought also

[@puttentanesame6687]

Hamster bidet...Hubert loves it!

[@justint5625]

Damn Right’s

[@sams6443]

This is the best video I have found for drilling holes in glass!

[@chrisnotap]

Wow, thanks!

[@janhughes3296]

This has to be one of the best instructional videos I have ever seen (and I have watched a bazillion)- thanks so much!

[@chrisnotap]

Wow! Thanks for that great feedback!!

[@TheThesmyths]

Drilled holes in my sunglasses. Great for cloudy day

[@Djcanhandleit]

Michael Cooke haha lol

[@mr44marvin]

That is probably the best comment I have ever seen on youtube. ROFL 🤓

[@617MrX]

Eye see what you did there...

[@iwgrobbelaar5252]

Best comment👌🏻

[@hots2215]

Best comment ever bro... xD

[@HiltonRalphs]

I'm off to drill small holes in all my office colleagues' coffee mugs.

[@howardwayne3974]

Evil !!! I like !!!!

[@jungleowl]

🤣

[@davidstrickland6428]

Make the holes small enough that they don't notice....haha.

[@TNdad87]

The hero we need

[@sandienochs6132]

Please run for president.

[@kathylewis7543]

Wow I'm amazed. I'm growing organics indoors didn't want plastics in organic I'm using glass bowls so I needed holes for drainag... I know You posted this 6 yrs ago I'm hoping I can still find this! Thank you!

[@orangehatmusic225]

Thank you. I am trying to make an air filter using a mason jar as a small filter for activated charcoal and your idea of the drill hole piece of wood jig is exactly what I was missing. Much appreciated!

[@KosarBakhsh-pf8fp]

I started as perfectly normal person. Now I want to drill holes every where.

[@loriearii474]

LOL I just ordered a drill.

[@kelvinmeneely3116]

Nnnnoooooo!!

[@morgantannerart]

Yo SAMEEE!!! I'm going to start making custom hourglasses, and this makes me motivated to cut a hole in errythang

[@chrisnotap]

I made a second video cutting holes with even more tips and tricks!! Here it is ..... kzbin.info/www/bejne/sIm6hmuEo86Aaas

[@davewalters6214]

i love holes

[@rickkrockstar]

Chris's wife: why is there holes in everything. 🤔😂

[@wisho-ro4305]

😂😂 damn it Christ! Quit drilling holes on all my stuff!

[@BURDYMAN777]

Chris: Well, maybe if SOMEBODY would put out every now and then, I wouldn't need to make holes in everything!

[@hpjk772]

Speed holes. Coffee mug performance enhanced by 70%

[@heebs1421]

🤣

[@deltanovember1672]

Hector R. Jesus did it!

[@gwiyomikim5988]

Time to make “dribble” glasses for the whole family! Thank you for the excellent video!👍🏼

[@garrettmeadows2273]

Wow! Even someone such as myself -who is mechanically inept--can cut a hole in a bottle/glass based your how-to-method. Thank you very kindly for assisting me with some projects I've been wanting to do.😁

[@chrisnotap]

Glad it was helpful!

[@Smickster01]

Finally, a useful video without all the time wasting bs and annoying music.

[@estherann7407]

I appreciated that too, love the editing! Thank you!

[@davecarpetcare]

You hit that nail right on the head. Definitely at the peak of the top videos on KZbin.

[@chrisnotap]

I made a second video cutting holes with even more tips and tricks!! Here it is ..... kzbin.info/www/bejne/sIm6hmuEo86Aaas

[@fvrrljr]

Master Jeweler/Goldsmith here: you got a standing ovation from me. pissing bottle stole the show. i like, OLE!

[@chrisnotap]

Lol! Thanks for that.

[@josephrossow8901]

Subscribed. This video gets down to business. It doesn't waste time. It gets straight to the point. Thank you for respecting my time as a viewer. I'm excited to go through your videos now and see a bunch of cool stuff!

[@patriciaotis1113]

Thank you so much!!! Bought a thick vase to make a lamp. Wasn't sure where to start... this video was heaven sent! 💖

[@dergluckliche4973]

The soda bottle with water is genius.

[@dulcebellz3857]

I know right swear I wish my brain had came with common sense too.

[@hadara69]

Simple, elegant, cheap. A true "triple-threat".

[@HillsWorkbench]

Excellent, fast-paced editing kept the video from becoming tedious, well done!

[@chrisnotap]

Thanks for that. I try to do that in all my videos.

[@Johnny-sj9sj]

Absolutely brilliant! Many thanks! 😈🇬🇧

[@chrisnotap]

I made a second video cutting holes with even more tips and tricks!! Here it is ..... kzbin.info/www/bejne/sIm6hmuEo86Aaas

[@henryettacollins9095]

She is being sarcastic

[@galaxiedance3135]

I'm very glad that I came across this video! added it to my Repair folder. Don't need this now but I have more knowledge now than I did 5 minutes ago. Thanks!

[@Eric-hr5cg]

Easy & practical idea 👍 ❤ A clever bit seller, after watching this video, should sell them with the template.

[@justlookin2]

This would really help to make holes in pots for plants. Yes, I'm a gardener. 😁

[@alexreith4877]

That's exactly what I was thinking too!

[@Sakura11101]

I've got an excessive amount of jars and was also thinking of this!

[@MyLittleGardenPlace]

Me too! :0)

[@justlookin2]

Great minds think alike!!!😜

[@user-lh2ne1ep8c]

It's for a bong

[@razztazz1982]

This video was so informative. The water bottle trick was amazing. Thanks for sharing!

[@kathydimas8377]

One of the best videos ever. No garbage throughout. Point, blank, period. This is how you do it. Awesome,,, KEEP UP THE GREAT SAME VIDEOS. Thank you so much!!!

[@Leightr]

Neat! I used a similar method and a slightly more expensive bit to drill holes in granite counter-tops for faucet installation back when that was my nine to five. I like the soda bottle trick. We used to just stop and dribble more water in every five seconds or so.

[@DavidLaFerney]

The pop bottle trick by itself is pure gold.

[@chrisnotap]

Thanks for that!

[@FILTHYHERMAN]

I filled my bottle with piss.

[@e.samson7429]

Excellent tip if you're out in the desert with no water.

[@Pynaegan]

You mean "pure golden showers".

[@BADD1ONE]

In masonry work we call em pee bottles

[@Ali_Fenne]

Well I know I'm going to get in trouble with this knowledge, thanks

[@stick9078]

I have these bits for my Dremel. They're awesome. You can even cut in at an angle. That 2liter bottle method is genius. Thank you!

[@joeweitman8530]

I watched your video. Ordered the bits from eBay. Worked like a charm.

[@randomactsofgaming845]

Lol, this guy reminds me of my dad. "Hey a found a cool new tool that drills holes in glass!", precedes to cut holes into everything made of glass in the house.

[@paddington1670]

when you have a hammer, everything's a nail.

[@napoleonbonerfarte6739]

electric bill through the roof after I turned my skylight into Swiss.

[@timgreen2426]

I know you can't hear this, but I am giving you a standing ovation!!! By far, the most helpful video on glass cutting ever!! Thank you for this!!!

[@mfdinak]

THANK YOU! 5 years later and this video is still helping people like me! Subscribed 🔥

[@loftsatsympaticodotc]

Wonderful, clear diction, good videography, great sequencing and editing. I nominate you Chris, for a You Tube Oscar. 😅 I am also itching to know why one would need a hole in a Mason Jar

[@chrisnotap]

Thank you for that great feedback!! The mason jar just happened to be one of the props I decided to use since I had so many of them!

[@markgonzales1970]

Why am I watching this, I do not need to drill a hole into glass.

[@Zudexa]

But then where will you stick your pickles?

[@tex6274]

You were watching ,or taking about marijuana

[@YXHIKO]

Cuz that was in your recomendation

[@obijuankenobi6565]

Bong Bong Bong Bong Bong Bong Bong Bong Bong Bong

[@roxettegee550]

😂😂😂😂 recommended vidz

[@drmkiwi]

Great tip, but having successfully drilled holes in 12 of my coffee mugs, they are now all useless! Cheers, David.

[@chrisnotap]

The ones I have don't seem to want to give up. They still work even after doing all the holes for the video.

[@thelyingscotsman7993]

Chris Notap I think he meant the coffee mugs lol.Great video.

[@celtisafricana4984]

But think of all the fun to be had pranking friends, family and co-workers...

[@jessehodge8283]

You can use Duct tape and fix the wholes.

[@tanalee09]

LOL!

[@chugwaterjack4458]

The water bottle cooling line is the real value here!

[@jenb6412]

I suddenly have so many projects I want to try! :D

[@anthonyfalcone5605]

Absolutely ingenious idea for the water spout! A real time saver.

[@wickedcalif2833]

I thought it was the new deal Pickle drill

[@okdarius]

I came across this trynna make a homemade bong and I can tell you I'm not disappointed.

[@LH-kz2nf]

Me and you both😂

[@charles401]

Just stumbled on to this video. I learned something. Great video. Actually, Excellent video......when you are 71 years old and you just learned something: Excellent! I'm old, but who knows....some day somebody may ask me to drill a hole into glass/ceramic and I'll say....."yea, I can do that" 👍👍

[@kevindondrea144]

LOL about the coffee mug. Great practical joke for a friend 😛.

[@1959Aeroflyte]

Finally someone who knows to get to the point of the video. No useless preamble or fluff. Explain, show and go. Oh and great video. Need to cut some holes in some glass and may order these bits soon.

[@chrisnotap]

I try to do that in all my videos and get right to the point of why you are there. Thanks for that feedback!

[@terrytytula]

That water bottle idea is pure genius !

[@chrisnotap]

Thanks!

[@elizabethwilson2873]

Terry Tytula Chucky 2000

[@alexanderdelpierre3866]

I don’t even have a drill or interested in cutting holes in glass but I saw the vid and I was not disappointed

[@anthony.fsanchez1176]

Wow thanks for such a an easy way to drill through glass, I have been wanting to make a few different projects but couldn't figure out what the best bits were for the job,These are definitely worth buying!!!

[@StephenS-2024]

I enjoyed this. The hole video. I wasn't bored at all. 😀 seriously, I found this to be very...in depth.

[@RodCalidge]

You weren't bored at awl? Lol

[@soundspartan]

Troy Stephens...Your remarks are very...penetrating!

[@bcikablam3578]

was that a pun? the *hole* video

[@heyitsvos]

Your puns are very transparent

[@seanpower1090]

☺😒

[@AndreaStevens2012]

Instead of making several jigs, one for each size hole/bit you can simply stick a piece of masking tape over the area you want the hole. Then place the diamond-coated drill bit/hole cutter on a slight angle and begin drilling until you've created a slight half-moon groove in the glass. Then gradually level your angle until you're straight up an down and then continue till you're through. The tape assists in keeping the bit from skipping all over the glass and is less involved than building a jig...really handy when you can't or don't have the time/space to build and store multiple jigs. Anyhew, just a little trick I learned along my way. 😊😉 Thanks for posting your video...I wasn't sure if I could use the same bits for ceramic tile, now I know. I especially liked your water bottle trick! Awesome idea!!! 😋

[@chrisnotap]

Yes, I learned more from comments like yours and did a second video with more tips and tricks.......here..kzbin.info/www/bejne/sIm6hmuEo86Aaas

[@bobmarshall3700]

I always use a center punch first!

[@AndreaStevens2012]

@@bobmarshall3700 How do you punch through glass? What bit or tool do you use?

[@AndreaStevens2012]

@@chrisnotap Cool beans!

[@robertmelvin8370]

Can not improve on his video

[@stevenv9770]

Who wouldn’t want a coffee mug with a hole in the bottom?! 😊 But on a serious note: great video, thanks! Just what I needed.

[@MagicGate814]

I've been doing the hard way for so long...seeing your video helps a lot!!! No more wandering drills :)

[@farialmab4723]

Great for making liquor bottle lamps and the mug can be a planter now, bulb-lighted mirror, Mason jar tap, etc. A world of possibilities! 🙂

[@crisl9079]

That was awesome, thanks for sharing! I, as a semi-tool-adept woman, was able to drill holes in my mason jar fairly easily. The plastic water bottle idea is genius...this is exactly what I needed to accomplish my task.👍🏼

[@chrisnotap]

That is awesome!

[@ruckaruckaali8351]

This video was thoroughly enjoyable I didn't even know that I needed to see this but I did

[@OliviANDixie]

Thanks for the tutorial! Hoping to make my own canning jar-style wall sconce lights. I've gathered that the jars must be ventilated to allow heat from the bulb to escape, hence my finding your helpful video. Really appreciate your extra notations throughout the video , and overall concise instruction.

[@nineteenfortyeight6762]

How about just really cool bulbs? LED?

[@cg2146]

That water bottle trick is the BEST thing everrrr!

[@agavebob3462]

THIS is what KZbin was made for!!!

[@tomday9939]

Agave Bob No it wasn't.

[@angelsong119]

Thank you so much for an excellent video! I'm ordering the drill bits today. You are a great creative thinker. The drill templates and the water bottle? Genius!

[@londiniumarmoury7037]

You went on a drilling spree didn't you, I bet your house looks like Swiss cheese now.

[@dangeluknow]

I love you for saying that, you made me smile so big, thank you!!

[@TheAlienPicture]

😂😂

[@kostanabanjac4896]

Londinium Armoury 😂😂

[@WORTIZBAEZ]

Hahahaha 😆

[@deejaykay1975]

Hilarious!!

[@Ps114REXIVD]

Now I also want to drill a hole in a mason jar to put a pickle in it...that's why I watched the video...to make a jar with a pickle sticking out on the side...great thumbnail 👌

[@maddogrk1]

Boy, does this help! Simply genius!

[@andrewgroves8523]

Love the water idea. I use these on tiles all the time and have never used water. It looks like a much cleaner cut

[@allanmaureenmacintyre4474]

Worth a thumbs up just for the plastic bottle water dispenser.

[@vernroach3413]

Thanks for the demo...I've considered buying these bits for different reasons and you sir, have sold me...Oh, excellent video.

[@maddystarlove]

TOO KEWL, Chris!!! You looked like you were having too much fun! The tip about the water in a bottle was awesome. I'm gonna try your method...can't wait!!!

[@laurelsmith4112]

I think you just saved me a bunch of money. I'm going to be doing this. I'm so going to be doing this. I love just love this video!!!

[@BENZ007]

Great video, thanks

[@chrisnotap]

Glad you liked it!

[@MilanTheMan69]

@@chrisnotap it's iddiotic video. I thought you have somekind of trick.. But in reality it is advertisement. Buy a tool specific for that... WOOOW What a miricle.

[@docd.t.torrance7845]

@@MilanTheMan69 It wasn't just using the specific drill bit. He showed the use of water to keep the bit cool to avoid cracking, slowly making a circular motion while drilling to avoid cracks near the drill site, setting up a template to use to start your hole, as well demonstrating how all of this works for a variety of materials.

[@tvdinner325]

I did this to a black coffee mug from the break-room. Colored the exposed white edges with a Sharpie, and let the fun ensue. I found it in the trash and coffee everywhere. AH!

[@TheNYgolfer]

Don't rock the bit. Causes chips and possible cracking of the glass.

[@smoothlyrough512]

And where's your video on cutting into glass, didn't seem to mess up his glass

[@ShonnDaylee]

@@smoothlyrough512 Yes it did. He mentions it in the video. TheNYgolfer is right. Just go slow and with as little movement as possible to get the cleanest cut.

[@Underbottom.Sandydown]

@@smoothlyrough512 smh

[@NormadYT]

@@smoothlyrough512 lmao how embarrassing that you typed that hahahaha

[@jeannegow2144]

LOVE the pop bottle with the hole cooler👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽

[@ellenj8896]

This is an excellent vid, and very helpful! I’ve been wanting to make some holiday glass vases filled with fairy lights, and needed the cord to come out near the bottom of the vase. Your vid was great, and thank you!

[@powerpc127]

Man, what a glass hole.

[@chrisnotap]

What did you call me?

[@mthedemonhunter]

Chris Notap I think he means you have a very nice glass hole. 😁

[@fvrrljr]

@powerpc127 and chris notap: great banter. plus i agree with maurice and joe

[@b8702131]

Too many glass holes here.

[@TheGekkewolf]

What can i do with the coffee mug after I drilled the hole?

[@stevedunkelberger9148]

No Chris you can't borrow a glass off of me again everytime you return them there's a hole in it.

[@orionxingu1758]

Simply brilliant. Now I can think of hundreds of uses for glass jars!

[@starshipgus8578]

Exelent tutorial,especially the “drilling jig and bottle,I didn’t know these diamond or carbide bits were so inexpensive.Thank you.👍

[@goaheadmakeourdayscooterpe9644]

Drilling holes is always a pane in the glass. Sorry couldn't help myself.

[@abdisasmonadir5545]

Pain*

[@evognayr]

It's Pane

[@42lookc]

My eyes glazed over.

[@sethlawson1692]

found the dad lol

[@arulaful]

good one..😆

[@bobbybob3681]

i did my grandmothers reading glasses now she has holefocals.....

[@Smickster01]

haha thats gold. grandmas holefocals. :-)

[@i0W4N]

Best comment of the year! Holefocals

[@Smickster01]

lol, thats kinda something i'd like to see. and old lady with neat little holes drilled into each lens, and grandma is none the wiser, but notes her vision seems blurry but only when she looks straight ahead.

[@engfeiyin]

🤓🤤😃

[@MichaelWilliams-in3iz]

Best comment ever

[@cookiepfeffer8196]

oh my gosh this has been so helpful. I have used the bits on ceramic pots but not glass. Thank you!

[@thehalfrican1386]

Actually super thankfull for randomly finding yhis. I do locksmithing and this would be a great use for certain latches over glass.

[@121Gw-Designs]

I liked the invention of the water jet from the bottle .. good idea. thanks for the links

[@johnkyrgios3449]

Best

[@lutherstark9573]

Yeah that's definitely worth remembering.

[@gordbaker896]

Thanks for just the facts and no music. Loved the trickle down water applicator.

[@mercoid]

This was a great tutorial. I don’t have the need to drill glass very often but had several times in the past. I wish I had this information then. This is just the kind of info I want out of KZbin. 👍

[@tonyweavers4292]

Wow! how beautifully simple is the water cooling idea.

[@adamlawrence427]

Seriously impressed with the home-made water jet from the soda bottle. I'm going to try that for some of my resin projects.

[@nallen6559]

WOW, what great and informative video. I've been wanting to cut a colored jar or bottle to put my LED fairy lights into for a night light. Problem solved, ordering the bits tonight.....many thanks.

[@caisycg1607]

Thank you!!! I was wondering how to do this for recycling glass bottles for outdoor lighting. I appreciate the info & video😊

[@janetnieves2629]

Best tutorial on "how to drill a hole in a bottle I've found! THANK YOU SO MUCH FOR IMPARTING YOUR KNOWLEDGE!!!

[@MileyonDisney]

Wife: Chris, what happened to my mirror? You: Glass termites!

[@zaphenath6756]

Glermites

[@bebotespinosa6834]

For cleaner cut, put a masking tape on the spot before starting to drill.

[@hadyanth]

Been doing this for all sorts of surfaces. Much cleaner 🙏🏼

[@ulysses_grant]

The only serious and useful comment in the comment section.

[@chrisstradling2535]

Won't that interfere with heat dispersal?

[@titsup4u]

MAsking tape ont he exit side as well will reduce microchipping. Clean cut

[@towdoctor670]

@@ulysses_grant you're right sometimes I read the comments and think about how advanced we haven't become.

[@jesusvega6562]

Best tutorial ive seen ever in my lifeee it made my answer to how do you make holes in glass.. this was exactly what i was looking for

[@stephenirwin2761]

Amazing! I did not know it could be so easy! Keep on amazing me! I just ordered the squeegee you showed for cleaning my car windows, now I will get some of these glam cutters. Thanks!

[@chrisnotap]

Glad I could help!