Hi Jennifer I just watched this video yesterday and today I cut out my chipboard with my explorer Air 2 ! I make paper purses with chipboard and of course cardstock. The explorer cut my chipboard perfectly. I used chipboard because that is what I had. Thank you for the new skill. Thank you for all you do. You teach us so well with your expert tutorials. Thank you again Linda. Tx.
@JenniferMaker2 ай бұрын
That's wonderful!
@yvettegittens14788 ай бұрын
I am so overwhelmed watching this. Jennifer, you make everything look so easy. This is too much right now lol
@triciatrzemzalski7928 ай бұрын
This looks like so much fun! Could we put butterflies in the box from the exploding butterfly box???
@JenniferMaker8 ай бұрын
You could totally do that🥰
@mystic918v8 ай бұрын
Super excited for this one!! I didn’t know we could cut cardboard with our cricket!!😁
@JenniferMaker8 ай бұрын
Yes you can!🥰
@campfarm69108 ай бұрын
Great timing, I'm going to make this for my Grandson's birthday. Thank you.
@Balletbabe4858 ай бұрын
As always, an excellent and thorough teacher! Even though I will use my Cricut Maker, I always appreciate how you give directions for those without a cutting machine in an impartial tone.
@ritabub66588 ай бұрын
Jennifer you come up with the coolest ideas! I love this jumping box. Plus thanks for teaching us how to cut cardboard. I was struggling with that. Thank you!!!
@annettev51368 ай бұрын
Another use for Amazon boxes!
@teresakusmierczyk49577 ай бұрын
Hi there! I am getting ready to attempt this jumping box (I think I can, I think I can!!!) I printed out the step-by-step instructions and followed along with the video to take notes, and I noticed that the Dream Box ad covered over many of the instructions, and I had to hand-write them in. Just thought you may want to know this. Can't wait to make it!
@JenniferMaker7 ай бұрын
Yay!
@jeanwinters75798 ай бұрын
Hello Jennifer, watching your replay, excited about cutting cardboard on my cricut.
@jamiewebb96268 ай бұрын
I love this project!! How do you come up with these projects? I am super excited to try making them. I just placed my Amazon order... I'll try again next month for my spending freeze. LOL.
@Superpsychandie8 ай бұрын
These look so fun! I can’t wait to try them!
@grandmacricut64058 ай бұрын
Love this time slot, starts at 9am in Canberra, Australia. Tutorial sounds like fun.
@teresajcoe488 ай бұрын
It will be 10pm here in the UK
@grandmacricut64058 ай бұрын
@@teresajcoe48 Hello from Australia.
@christineslobodian39888 ай бұрын
This looks awesome, can’t wait to try it out.
@dianaonorato66318 ай бұрын
Hi Jennifer love your videos. You mentioned telling us how to determine the thickness of our cardboard in this video but I didn’t see it anywhere!! I would love to know!! Thank you!!
@JenniferMaker8 ай бұрын
It's usually on the listing when you purchase it. If you have calipers you could also measure it that way🥰
@miriamlopez65198 ай бұрын
Hi from Long Island NY
@brendarivera47466 ай бұрын
This is sooo cool!
@JenniferMaker6 ай бұрын
Thank you!
@lynnanderson24268 ай бұрын
Wow! You've done it again!
@susanamedure7678 ай бұрын
Helloo from Michigan ❤
@mentesymanoscreativas8 ай бұрын
Love this tutorial as always.
@SCroff-yj9jz7 ай бұрын
I love this idea.I've gotten all my supplies and ready to make my exploding box. Can we use the scoring tool on the Explorer machine to do the scoring or do we score box by hand? I didn't see that mentioned in your video. I only heard about using the Scoring wheel for the Maker. Thank you.
@JenniferMaker7 ай бұрын
Yes you can! jennifermaker.com/cut-cardboard-with-cricut/ ❤️
@janellpettry61468 ай бұрын
Amazing as always!
@sandramartin14608 ай бұрын
These are so cool
@ufoquilter867 ай бұрын
Omg it’s to fun!
@JenniferMaker7 ай бұрын
It is a fun surprise!
@susanpaulson98268 ай бұрын
So cute! Thanks 😊
@reneedickerson44898 ай бұрын
Looks so fun!
@JenniferMaker8 ай бұрын
Give it a go!
@yvonnealvizo8 ай бұрын
Fun project! Thank you!🥰tfs
@nettajar19388 ай бұрын
So much fun!!!
@susanirwin27594 ай бұрын
hi Jennifer, excited to make this for a friends 40th anniversary. Would cricut foil kraft board be strong enough. Thanks for sharing.
@JenniferMaker4 ай бұрын
Yes, you can use that to make this.
@Bummy67168 ай бұрын
Cute!❤
@bjconn74628 ай бұрын
Thank you
@WendyMcBeth8 ай бұрын
Love this and can't wait to try it. Wondering 2 things. 1 I don't have the cutting blade, could I use the scoring stylus to mark my cutting lines? 2 could the washers be laid under the coloured card and either glued over or could foam stickers be used instead to create space for the washers?
@JenniferMaker8 ай бұрын
You mean so you could then cut by hand? Probably but you'd need to set it to score instead of cut. You can try to cover them but it might throw off the mechanism 🥰
@haleakalah8 ай бұрын
Love it. Quick question…could the washers go underneath the cardstock or place additional cardstock over it? I know that area will be lumpy, but it wouldn’t be as obvious as the exposed metal washer. Just not sure if it will interfere with the “jump”.
@JenniferMaker8 ай бұрын
You could always try🥰
@kathyisaako49428 ай бұрын
Beautiful ❤
@billbart10008 ай бұрын
Hello from Illinois
@edightaferdinand75428 ай бұрын
From the island of Saint Lucia. Interesting session. Is my Explore Air 2 able to dut cardboard?
@JenniferMaker8 ай бұрын
Yes! 🥰
@nesnahojsinajakajj8638 ай бұрын
Hello Jennifer , sharing the love from da UP. Was wondering if you can hide the elastic and washer on the outside under the card stock or will that effect how it jumps? Beautiful project as always.
@JenniferMaker8 ай бұрын
You could try but you wouldn't be able to glue the outside piece down. 🥰
@diannerobert38228 ай бұрын
Those are very cute , but don’t have those cardboard right now 😊
@chefgaintv28913 ай бұрын
It's good
@JenniferMaker3 ай бұрын
Thanks!
@kerrimcintyre6427Ай бұрын
Can you show us how to make a mailer box using cardboard
@JenniferMakerАй бұрын
Like a cardboard envelope for mailing large cards? You can request that here. jennifermaker.com/projectrequests/
@Sasa-sn1ky4 ай бұрын
Hi, thanks for the tutorial. I've bought a Cricut Explore 3 and want to make a candle box on it. I've tried different papers, even 300gsm, but none of them is sturdy enough to hold the candle. Could you please advise which sturdy paper/cardboard is the best for it? Thanks in advance.
@JenniferMaker4 ай бұрын
I have links below the video to the exact paper that I used 🥰
@mentesymanoscreativas8 ай бұрын
How do I sign in for the Advance Program with you?
@JenniferMaker8 ай бұрын
You can join the waitlist by going to jennifermaker.com/advance 🥰
@mentesymanoscreativas8 ай бұрын
Thank you! I did 💃🏽🎉🎊
@ryankelly74068 ай бұрын
Question I don't have a lot of money so I was looking on Cricut website and so refurbished cutters do u think it's ok to use refurbished
@JenniferMaker8 ай бұрын
I don't see why not🥰
@Theresa56018 ай бұрын
Could I try this with Chipboard Sheets 8.5 x 11 inch - 22pt? I have some extra of this stuff and it’s not my favorite I probably wouldn’t buy it again.
@JenniferMaker8 ай бұрын
Go for it! It may not be that sturdy. jennifermaker.com/cut-cardboard-with-cricut/
@craftGal15688 ай бұрын
Sorry I missed this.
@nancytraina33048 ай бұрын
Where can I get the shelf you have above your circuit?
@JenniferMaker8 ай бұрын
We designed and made them on our 3D printer. We plan to share the print files on our blog lat some point for anyone else who wants them. There are two styles -- the one on the left uses PVC pipes, so it’s height adjustable to your needs. The one on the right is all 3D printed except for the table, which is a piece of wood screwed to the legs. Both meet the requirements in Cricut’s Safety Instructions for “a flat and stable surface” as the Cricuts are just sitting on stable tables.
@jordynmcswain8 ай бұрын
Can Kraft board be used instead of cardboard?
@JenniferMaker8 ай бұрын
You can try it but it might be too thin 🥰
@charlenefriesen82868 ай бұрын
I have a question for you. I have a print and cut image that I wanted to cut up the itv to layer it on a shirt for me for my son's soccer team, The image has multiple layers on top of the shield, I can send you a picture, my question is how can you turn a print in cut into just a cut image in design space? When I change the image to cut it turns the whole image grey. I have tried slicing it up but I could even do that. Someone said in a video that I need to convert it in ink space or Silhouette design, do you know of a better way I don't want to have to learn another program just to make 1 shirt. Any advice would be appreciated.
@JenniferMaker8 ай бұрын
That is a process that takes time to do. We have a workshop on this. makeracademy.com/custom-cut/
@susanmoore27488 ай бұрын
My lid is very loose and when placed on my box and then removed, my box did nothing. Not sure what I did wrong.
@JenniferMaker8 ай бұрын
The blog post has more details. jennifermaker.com/cut-cardboard-with-cricut/
@rosalynvfrazier2 ай бұрын
Had the same experience with the loose lid and the blog post didn't help. Guess I am moving on to a different project
@conniedlawsonАй бұрын
I’m confused you said if it doesn’t work cut it by hand, then why have a machine if you can’t cut cardboard
@JenniferMakerАй бұрын
That is just a suggestion. Cardboard is not a usual standard material that is cut on the Cricut. help.cricut.com/hc/en-us/articles/360009504773-Which-materials-can-I-cut-with-my-Cricut-smart-cutting-machine#explore-machines
@conniedlawsonАй бұрын
@@JenniferMaker wait so your saying the Cricut isn’t used for cardboard, well cardboard is one reason I got the Cricut to cut heavier stuff and it does with the right blade.
@larissaalvarez5754Ай бұрын
What bored
@JenniferMakerАй бұрын
Here is the blog post with more details. jennifermaker.com/cut-cardboard-with-cricut/