How to cycle with less effort. Bicycle bottom bracket maintenance

  Рет қаралды 502,270

Good Bicycle

Good Bicycle

Күн бұрын

Пікірлер: 409
@GoodBicycle
@GoodBicycle 7 ай бұрын
❤ help the channel get better! 🚀 share this video with your friends ❓ ask your questions
@furivno
@furivno 10 ай бұрын
Remember, if the bearings are not glowing red after the ride then you are not outputting enough power and you need to train more
@GoodBicycle
@GoodBicycle 10 ай бұрын
😍😍😍 👍
@kenzulumovski892
@kenzulumovski892 8 ай бұрын
I desperately want this gentleman to perform this on my bike. How satisfying to watch!!
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for your comment! 😍
@UtubedatShit
@UtubedatShit 3 ай бұрын
I'm a little confused. You didn't install your own bottom bracket?
@ryancraig2795
@ryancraig2795 10 ай бұрын
Servicing sealed bearings that have corrosion like that in them seems a bit pointless to me. I would have sourced new bearings. Fully sealed ones.
@GoodBicycle
@GoodBicycle 10 ай бұрын
you don't always have a new part on hand to replace it.
@roddas26
@roddas26 10 ай бұрын
And pitted bearings and races feel bad even after all this hard work.
@tonyjuliano1
@tonyjuliano1 10 ай бұрын
This…
@paulgrimshaw8334
@paulgrimshaw8334 7 ай бұрын
Agree. Reinstalling a bearing that has been pressed out isn’t a good idea. Also, a full contact sealed bearing is suitable for this application because the old bearing operated in dirty and wet conditions. While on the subject of bad ideas… Never, ever, spin a dry bearing. Especially with compressed air because the rotational speeds can be very high. Zero lubrication means metal-on-metal contact. When un lubricated, cages can score bearings and races. Most bearing manufacturers specify a 1/3 fill of grease. Anything more than that will add drag and squeeze out past the seals during use… and attract dirt.
@eric-janh.ted.8880
@eric-janh.ted.8880 7 ай бұрын
And probably a new bearing of a higher quality. Standard they're mostly of a mediocre quality. Bearings that are in a shape like this one, most of the time are having to much slack after cleaning. And that is costing efficiency too. And then there are the bearings in the pedals too. Most of the time they can't be serviced at all.
@-Steve-01
@-Steve-01 10 ай бұрын
Great to see something being restored rather than thrown away and replaced (as seems the norm in this era before we’re finally forced to look after our planet). Would have loved to see/hear the cranks spinning on the bike before/after.
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment. Sadly, not the entire repair process was captured in the video
@krissk77
@krissk77 10 ай бұрын
I only throw away broken ones... if it can be salvaged. Will do that first but will hv a new one on the ready. The old one can be used on another old bike that u can give away in working condition.🎉
@leoszilard3998
@leoszilard3998 9 ай бұрын
Hexagonal Boron Nitride powder with Molybdenum Disulfide grease.
@tuber7853
@tuber7853 8 ай бұрын
this is a DAMN detailed video on dismantling of bb bearing for servicing...every of the video angle are well documented and his servicing skillset is marvelous👍
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@paulgrimshaw8334
@paulgrimshaw8334 7 ай бұрын
It is very well photographed but some of the methods shown in refurbishment are incorrect.
@cosmefulanito5933
@cosmefulanito5933 10 ай бұрын
Maintenance is excellently explained. Unfortunately, those bearings have a lot of play and they have to be changed.
@GoodBicycle
@GoodBicycle 10 ай бұрын
thank you for your comment! 😘
@sat9m
@sat9m 3 ай бұрын
Beyond Bike mechanics and maintenance this is professional quality video and sound effects.
@GoodBicycle
@GoodBicycle 3 ай бұрын
Thank you for your feedback! 😘
@brunodecenzo8092
@brunodecenzo8092 10 ай бұрын
ottimo lavoro. Apprezzo anche la scelta di non rovinare il video con inutile sottofondo musicale. Grande!
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@ndrewx
@ndrewx 5 ай бұрын
Geez Man! You're an artist! Your videos are amazing! And it's a very good approach to sustainability, not to immediately buy new and throw away the old, but to save, renovate and repair what we can. Of course I share.🤘
@GoodBicycle
@GoodBicycle 5 ай бұрын
Thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘
@fredpomi851
@fredpomi851 10 ай бұрын
Impressive video production! One day maybe, when I am retired with a proper workshop. I have built a few home-made bearing presses and it is an absolute headache to find the right parts (let alone for the extraction process which always requires specific dedicated parts).
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your feedback. May your dreams come true😄
@franciscoiranramosvalenzue5153
@franciscoiranramosvalenzue5153 9 ай бұрын
Donde podría conseguir ese extractor se los baleros? Me pareció muy eficaz.
@GoodBicycle
@GoodBicycle 9 ай бұрын
Prueba a buscar en grandes tiendas de bicicletas online o en mercados chinos
@OjStudios
@OjStudios 10 ай бұрын
Good to know as a hobby thing, in the shop all that labor is so expensive that you can get 5 new bottom brackets with that price.
@GoodBicycle
@GoodBicycle 10 ай бұрын
it's for the soul.)
@iancho9587
@iancho9587 10 ай бұрын
@@GoodBicycle Soul and skill, all those comments for cheaper to buy can't fix a broken chain without master link on their never flat carbon wheelsets... In fact, freshly packed BB is a must-to-do on a brand new rig, don't have to believe me just take it apart and find yourself Why? little recommendation at your procedure, at the very last step with the external protective coat try to spray some dry silicone instead of grease - it should last till next interval with the added benefit of no dust collecting. Cheers
@kersh4w
@kersh4w 10 ай бұрын
You'd be surprised at inadequate level of grease in brand new bearings on suspension pivots and bottom brackets. I think it's good practice to always at least disassemble to check the grease for new bearings.
@richardggeorge
@richardggeorge 10 ай бұрын
​@@kersh4wI pull apart every Shimano BB and add grease and adjust cones
@ГеоргиСтоянов-ш4т
@ГеоргиСтоянов-ш4т 5 ай бұрын
Very nice video - just what I was looking for. It might be cheaper to buy a new BB than to pay for full servicing but it sure is fun to do it yourself and feel satisfied with your work on your own bike.
@GoodBicycle
@GoodBicycle 5 ай бұрын
Thank you for your views and comments. It is indeed sometimes easier to replace the entire bottom bracket, but we have shown one of the repair options
@selimiye22
@selimiye22 11 ай бұрын
👍👍👍👍👍mükemmel bir işçilik,çekimler süper ve herşeyi gösteriyor,sizin gibi işinde uzmanlaşmış,teknik insanlara bisikletimin bakımlarını yaptırmak isterdim,,,
@GoodBicycle
@GoodBicycle 11 ай бұрын
Thank you for your comment! 😍 If you liked my videos ❤️, support the channel financially 💰🙏. Use the "Membership" / "Sponsor" function on KZbin ✊😘
@billyshakespeare17
@billyshakespeare17 8 ай бұрын
Very nice video. Also the greatest advertisement for BB30 bottom brackets (provided your frame is within tolerances, unfortunately many are not).
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for your comment. For some reason, BB30 is not such a popular standard and it is not always easy to find cranks for it
@xXjoehotXx
@xXjoehotXx 10 ай бұрын
great vid ! no bad music in bg and good pics !
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@lonerbikes
@lonerbikes 7 ай бұрын
what tool is this for remove barings from bottom bracket bowl ?
@GoodBicycle
@GoodBicycle 6 ай бұрын
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@lonerbikes
@lonerbikes 6 ай бұрын
@@GoodBicycle thanks 😊
@Cycle-Tourer
@Cycle-Tourer 10 ай бұрын
Not necessary to release the bearing outside. Just remove one rubber. Put all the area in a fluid to clean. Shake it to release the dirt. Dry it and lubricate it. Easy! Alternative buy 2 new bearing for 3-4 dollars and change.
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your feedback! 😘
@jalminyondong5519
@jalminyondong5519 10 ай бұрын
keren mas bro videonya bening dan tutorialnya mudah difahami, thanks share ilmunya ...🥰
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment! 😄 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@julianrogers63
@julianrogers63 10 ай бұрын
To all the people who say just replace bearings i live in NZ cant get bearings alone have to replace whole crank set $1200 i think ill clean mine out !
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment! ❤️❤️❤️
@haughie61
@haughie61 10 ай бұрын
Find a good bike shop
@bazingabert3346
@bazingabert3346 11 ай бұрын
i like the way you "explain / show " this ... got a question, how do you see the difference between a dirty bearing of one thats been worn out ?
@GoodBicycle
@GoodBicycle 11 ай бұрын
Let's just say that if the bearing is dirty, it is definitely already worn.) In fact, it should be replaced with a new one. but the theme of the video is that the bearing can still work for a while if it is well maintained).
@tomekborucki1120
@tomekborucki1120 10 ай бұрын
If it's dirty it's not already worn. It's work when it feels rough when spinning.
@pedrocalixtooficial
@pedrocalixtooficial 10 ай бұрын
🇧🇷 Fazer manutenção na bike é muito importante para durabilidade dos componentes, like merecido tmj assistindo aqui em São Paulo Brasil
@GoodBicycle
@GoodBicycle 10 ай бұрын
Obrigado pelo seu comentário! ❤️❤️❤️ Partilha este vídeo com os teus amigos, isso ajudará no desenvolvimento do canal! 📈😘
@pedrocalixtooficial
@pedrocalixtooficial 10 ай бұрын
@@GoodBicycle Ok 👍🏾 Vou compartilhar sim
@profesor_artes
@profesor_artes 10 ай бұрын
Hola, me gustan muchos tus videos, siempre aprendo mucho de ellos. Me gustaría saber donde se consigue la pieza para desmontar las balinesas que mostraste en el video
@GoodBicycle
@GoodBicycle 10 ай бұрын
¡Estamos encantados de ser de utilidad! Gracias por sus comentarios! 😘 Las herramientas especializadas siempre se pueden encontrar en mercados online o clasificados
@SauronsEye
@SauronsEye 8 ай бұрын
9:30 Greasing your bearings. An effective but messier method to ensure you get grease to all parts of your bearing is to put some grease on the edge of your non dominant palm. About the mid point between your small finger and the heel of your hand opposite your thumb. Then using your dominant hand, lay the ball bearing part of the bearing on the grease and then press down and drag the bearing towards you, using both the pressing down and dragging of the bearing, while also pressing back with the edge of your non dominant palm, to press the grease into the bearing. Then rotate the bearing slightly and repeat till you've done the whole bearing and you can see grease coming out of all parts of the bearing on the side facing you. Repeat for the other side of the bearing and you should have grease applied to all parts of the bearing that need grease. Replenish the grease as required during all stages of the above process.
@GoodBicycle
@GoodBicycle 8 ай бұрын
Interesting technique, thanks for the advice.
@madmax2069
@madmax2069 6 ай бұрын
Yes, the old bearing grease packing method.
@ricardo.a.escudero258
@ricardo.a.escudero258 10 ай бұрын
A mi me gustarua saber cuanto cuenta este mantenimeinto .? Saludos
@GoodBicycle
@GoodBicycle 10 ай бұрын
Hola. En nuestro país, este tipo de trabajo cuesta 6-10 euros, pero el desmantelamiento se cobra por separado
@MarcelReinieren
@MarcelReinieren 10 ай бұрын
Bearings with rust do always have small damage, dents, and play. New ones are widely available. But if you have an old bike, you could do this. I would not recommend.
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your feedback! 😘
@MellowBellow_
@MellowBellow_ 10 ай бұрын
Could you provide an itemized list of products/tools you’re using for this process?
@GoodBicycle
@GoodBicycle 10 ай бұрын
It's a bit stressful, maybe we'll add subtitles later
@nashgawri4869
@nashgawri4869 10 ай бұрын
The sounds that everything made in your video made me laugh, very well done👌👌🙏🙏
@GoodBicycle
@GoodBicycle 10 ай бұрын
thank you! but what kind of links are we talking about?)
@krissk77
@krissk77 10 ай бұрын
Most u can get online...
@antoniomora8487
@antoniomora8487 10 ай бұрын
Está muy bueno el vídeo pero me gustaría saber que ingredientes usa para limpiar los rodamientos. El nombre de cada líquido que usa por ejemplo alcohol o algo así por el estilo. Por qué en cada país tienen nombre diferente. Saludos desde Cúcuta Colombia 🇨🇴🚲👍 Ya tienes un suscriptor más 👍
@GoodBicycle
@GoodBicycle 10 ай бұрын
Gracias por sus comentarios. Efectivamente, hay algunos problemas con la disponibilidad y las traducciones de distintos componentes en diferentes países. Utilizamos combustible de camping para limpiar componentes muy sucios y grasientos. Para desengrasar (en el vídeo, una lata con pulverizador), utilizamos isopropanol.
@antoniomora8487
@antoniomora8487 10 ай бұрын
Muchas gracias por el dato sigue adelante con sus buenos videos. Muchas gracias y muchas bendiciones Bro 🙏🤗🚴🇨🇴🚲
@krzysztofszewczyk2570
@krzysztofszewczyk2570 5 ай бұрын
Cześć! Mógłbyś tylko zdradzić jakiego używasz smaru, albo chociaż jaki powinienem kupić właśnie do takich łożysk?
@GoodBicycle
@GoodBicycle 5 ай бұрын
W przypadku łożysk używamy Divinol Fett Top, ale można użyć dowolnego analogu na bazie wapnia
@aessio85
@aessio85 10 ай бұрын
Fantastico lavoro bravo.Che prodotto usi per pulire i cuscinetti e le calotte del movimento di centro?
@GoodBicycle
@GoodBicycle 10 ай бұрын
detergente per il lavaggio di motori a combustione interna se ti è piaciuto questo video, condividi questo video con i tuoi amici ❤️ aiuterà lo sviluppo del canale! 📈
@aessio85
@aessio85 10 ай бұрын
@@GoodBicycle perfetto grazie mille,sarebbe petrolio bianco o sbaglio? Condividerò di sicuro
@HectorCala
@HectorCala 10 ай бұрын
Bien video, pero ya que retiras la balinera, seria mejor colocar una nueva, no es necesario retirarla para realizar la limpieza y engrase, deberías también fomentar el uso de protección de las manos, como guantes de nitrilo o látex.
@GoodBicycle
@GoodBicycle 10 ай бұрын
Me resulta muy difícil trabajar con guantes
@HectorCala
@HectorCala 10 ай бұрын
@@GoodBicycle los químicos te pueden afectar la piel. Usa unos quirúrgicos que te queden justos y le aplicas talco internamente para que sean fácil de colocar.
@leicusezeo6757
@leicusezeo6757 10 ай бұрын
Appreciate the process and i felt ita therapeutic in someway. Would love to do this on my bike with the proper tolols.. I wish to know what is the tool called for removing the bearing or a similar product link?
@GoodBicycle
@GoodBicycle 10 ай бұрын
tool - is DIY Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@ironman1518.
@ironman1518. 10 ай бұрын
Excellent video!! Thank you; where do I get the tool to pull the bearing out please??? TIA!!
@GoodBicycle
@GoodBicycle 10 ай бұрын
Glad to be of service! Thank you for your feedback! 😘 Specialized tools can always be found on online marketplaces and stores.
@ironman1518.
@ironman1518. 10 ай бұрын
What grease are you using, please? TIA! What is the brand name of the bearing puller tool you use, please?
@Crystalheard
@Crystalheard 4 ай бұрын
Nice vid! Is the bearing pulling/pressing tool self-made?
@GoodBicycle
@GoodBicycle 4 ай бұрын
Thank you for your comment. The instrument is almost handmade, we bought it from a local craftsman
@jackiegammon2065
@jackiegammon2065 5 ай бұрын
I've always used brake cleaner on something like that, the cleaner will do a great job at cleaning and evaporates quite quickly.
@GoodBicycle
@GoodBicycle 5 ай бұрын
Thank you for your advice. I really don't like the acetone smell of brake cleaner
@johonnyquinatoa5011
@johonnyquinatoa5011 10 ай бұрын
Me gustó es truco de el tubo de llanta para proteger el pedal . En mi país ecuador no encuentro el extractor de rodamientos de pedalier😊
@GoodBicycle
@GoodBicycle 10 ай бұрын
¡Gracias por tu comentario! 😍 si te ha gustado este video comparte este video con tus amigos ❤️ ¡ayudará al desarrollo del canal! 📈
@helmutw.4882
@helmutw.4882 9 ай бұрын
Gutes Video! Aber irgendwann sind die Lager so eingelaufen das billiger ist einen neuen Satz, anstatt das Werkzeug zum ausbauen dafür zu kaufen😁
@GoodBicycle
@GoodBicycle 9 ай бұрын
Vielen Dank für Ihr Feedback! 😘
@antoniodepaduafortes3110
@antoniodepaduafortes3110 8 ай бұрын
Onde compro essa ferramenta para tirar o rolamento?
@GoodBicycle
@GoodBicycle 8 ай бұрын
Infelizmente, não posso dizer-vos. É uma ferramenta que temos na nossa oficina há vários anos. Tente pesquisar por "ferramenta de prensagem de rolamentos Hollowtech II
@gauravjain.indore
@gauravjain.indore 7 ай бұрын
Could you please mention, what exact grease you used to relubricate. cant find good grease for bearings here
@GoodBicycle
@GoodBicycle 7 ай бұрын
For lube, we use thick calcium grease Divinol
@s.j.5850
@s.j.5850 10 ай бұрын
Just add a small piece of pipe to that threaded rod & you won't have to wind the nut all the way down. Great video. You are very meticulous!
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@qwertyazerty2137
@qwertyazerty2137 6 ай бұрын
Where can I get this bearing removal tool from?
@GoodBicycle
@GoodBicycle 6 ай бұрын
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@macducati2304
@macducati2304 10 ай бұрын
He knows what he's doing but......just go and buy a new bottom bracket they aren't that expensive, plus there will be wear on those bearings anyway.
@GoodBicycle
@GoodBicycle 10 ай бұрын
thank you for your comment! 😘
@theunknownunknown3007
@theunknownunknown3007 6 ай бұрын
Hallo, leidet das Kugellager nicht durch den axialen Druck vom inneren Ring beim Auspressen? Welches Fett verwendest Du bei den Lagern? Super Videos!
@GoodBicycle
@GoodBicycle 6 ай бұрын
Hallo! Das Lager wird nicht beschädigt sein, aber es ist besser, es durch ein neues zu ersetzen
@peterwillson1355
@peterwillson1355 8 ай бұрын
This is why I prefer square taper spindles with serviceable cups. They spin a LOT better.
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for your feedback! 😘
@Mr.Leeroy
@Mr.Leeroy 3 ай бұрын
how are they serviceable? Can you name suck models?
@krissk77
@krissk77 10 ай бұрын
Nice.... the fact that they can be dismantled means they can be repaired and reused. I do repairs but will hv a new one on hand in case the repaired doesn't last. 🎉
@GoodBicycle
@GoodBicycle 9 ай бұрын
Thank you for your comment. It's more complicated than a complete replacement, but cheaper and more environmentally friendly 😊
@alessandropiccato5960
@alessandropiccato5960 6 сағат бұрын
Ciao dove posso acquistare lo strumento per rimuovere i cuscinetti!? grazie
@ailtondba
@ailtondba 3 ай бұрын
what is the brand of this grease ? thank you
@GoodBicycle
@GoodBicycle 3 ай бұрын
Thank you for your comment! 😘 Divinol Fett Top 2003
@ludekdo3817
@ludekdo3817 8 ай бұрын
If the bearing is pressed out only by the inner ring, it is destroyed. Then it makes no sense to clean and lubricate it, it is better to put a new one. As you can see in the video, the new one is pressed behind the outer ring and that's right.
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for the clarification 👍
@ZeevKovalsky
@ZeevKovalsky 10 ай бұрын
I have a brilliant idea! Just change to new ones! 😀😀😀 Better faster and the proper way to do it!
@GoodBicycle
@GoodBicycle 10 ай бұрын
thanks for the advice 😘
@yellowveedub
@yellowveedub 10 ай бұрын
My new BMX race bike uses this type of bottom bracket. Bearings got swapped out immediately for ceramic units 😁
@GoodBicycle
@GoodBicycle 10 ай бұрын
👍
@karlrogger5325
@karlrogger5325 10 ай бұрын
Were you can get the bearing remove tool or is it diy?
@GoodBicycle
@GoodBicycle 10 ай бұрын
diy )
@aarondumaguing3831
@aarondumaguing3831 6 ай бұрын
where to buy that tool and what it's called?
@GoodBicycle
@GoodBicycle 6 ай бұрын
It's a handmade instrument, bought from a local craftsman. Analogues can be found by requesting Bottom Bracket Bearing Removal Tool
@Godspeed961
@Godspeed961 9 ай бұрын
Very nice and detailed video ! I love the camera ! I open the BB to clean it and i found that is pressHand (it comes off with the chainrings) ! Its a new type? Lol i dont need that BB tools anymore :D
@CharlieMetcalf
@CharlieMetcalf 9 ай бұрын
Good video on how to repair the new BB's. Thanks!
@GoodBicycle
@GoodBicycle 9 ай бұрын
glad to be of service! thanks for your feedback 😘
@ivanleyong4025
@ivanleyong4025 8 ай бұрын
Hola me ayudas tengo holotech no me gusta , rodamientos en constante mantenimiento. Tu crees que es mejor el antiguo mecanismo? Yo pienso que si
@GoodBicycle
@GoodBicycle 8 ай бұрын
Hola. Si el pedalier es de Shimano, entonces el sistema hollowtech y el cuadrado serán más o menos de la misma calidad. Los ejes de pedalier hollowtech chinos serán de peor calidad que los cuadrados, pero depende de tu suerte
@AugustoDeRamos
@AugustoDeRamos 10 ай бұрын
Where can I buy this tool to extract bearings?
@GoodBicycle
@GoodBicycle 10 ай бұрын
Try searching in large online bike shops or on Chinese marketplaces
@jameerbasha3154
@jameerbasha3154 7 ай бұрын
what green gel or frease are you using please
@GoodBicycle
@GoodBicycle 7 ай бұрын
If you are referring to a grease, it is thick calcium grease Divinol
@michaelparreno5391
@michaelparreno5391 4 ай бұрын
I love the BB puller tools😍
@GoodBicycle
@GoodBicycle 4 ай бұрын
thank you for your comment!
@tuanminhnguyen1492
@tuanminhnguyen1492 10 ай бұрын
What type of bearing grease is it?
@GoodBicycle
@GoodBicycle 10 ай бұрын
calcium-based grease
@isaiahwelch8066
@isaiahwelch8066 10 ай бұрын
​@@GoodBicycle: Marine grease, being used on boats and boat trailers, is better. The reason why is because marine grease repels water, which cuts down on corrosion.
@martincansiani4183
@martincansiani4183 10 ай бұрын
Hola ..No se puede hacer girar el rodamiento en seco, se raya la pista..La grasa va limpiando la pista para q las boliyas corran bien sobre la pista.. cuando hace ruido el rodamiento no sirve mas.. no tiene arreglo..
@GoodBicycle
@GoodBicycle 10 ай бұрын
Lo hice mejor de lo que era )
@mohaiminulasif607
@mohaiminulasif607 10 ай бұрын
Where can I get the bearing puller tools?
@GoodBicycle
@GoodBicycle 10 ай бұрын
You need to look for tools for workshops in online stores, as you are unlikely to find them in ordinary bike shops
@mohaiminulasif607
@mohaiminulasif607 10 ай бұрын
@@GoodBicycle can you provide some link?
@tefltoulouse
@tefltoulouse 7 ай бұрын
Wow I didin't even know you could take these things apart! Nice trick at 3.15 using crankset! I haven't got any of the other tools to do the job though.
@GoodBicycle
@GoodBicycle 7 ай бұрын
glad to be of service! thanks for your feedback 😘
@TheTriangle444
@TheTriangle444 10 ай бұрын
the internal working of the bb looked well greased anyway, didnt need that much dissection
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thank you for your feedback! 😘
@claudiopamparato2733
@claudiopamparato2733 8 ай бұрын
Great Job bro! Great pro service!
@GoodBicycle
@GoodBicycle 8 ай бұрын
glad to be of service! thanks for your feedback 😘
@tomjoad1363
@tomjoad1363 7 ай бұрын
@8:20 What is the liquid in the syringe? Same question @10:40.
@GoodBicycle
@GoodBicycle 7 ай бұрын
gasoline
@tomjoad1363
@tomjoad1363 7 ай бұрын
@@GoodBicycle Regular or premium 😂
@GoodBicycle
@GoodBicycle 7 ай бұрын
purified "Kalosha"
@wallyedmonds8199
@wallyedmonds8199 8 ай бұрын
Oh , where you get those tools .
@GoodBicycle
@GoodBicycle 8 ай бұрын
These tools were gradually accumulated over the years of the workshop's work😊
@romaint.5273
@romaint.5273 9 ай бұрын
Très bonne vidéo sur l'entretien des roulements BSA, je pratique ainsi depuis des années sur mes VTT. Par contre les roulements dans votre vidéos ont trop subi de corrosion pour être rattrapés. Les billes sont corrodées et leur état de surface a été endommagé à jamais, elles ne seront plus jamais aussi lisses que des billes neuves même après un nettoyage / regraissage, et le roulement ne sera plus jamais aussi fluide qu'un neuf en charge. Vu le prix d'un roulement acier neuf, le plus simple est de changer les roulements par des neufs pour retrouver une vraie fluidité. Mais sinon merci pour votre vidéo très bien réalisée.
@GoodBicycle
@GoodBicycle 9 ай бұрын
Merci pour votre commentaire ! 😍 si vous avez aimé cette vidéo, partagez cette vidéo avec vos amis ❤️ cela aidera au développement de la chaîne ! 📈
@hilltopper600
@hilltopper600 4 ай бұрын
what is the green grease
@GoodBicycle
@GoodBicycle 4 ай бұрын
Divinol Fett Top 2003
@mr.lonely52
@mr.lonely52 6 ай бұрын
Where to order the tool my friend??
@GoodBicycle
@GoodBicycle 6 ай бұрын
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@mr.lonely52
@mr.lonely52 6 ай бұрын
@@GoodBicycle thank you sir
@francescoiannucci1689
@francescoiannucci1689 10 ай бұрын
Hai smontato il movimento centrale per pulire i cuscinetti due cuscinetti sigillati nuovi costano circa 25 euro non facevi prima cosi ? E' sei anche piu' sicuro?
@GoodBicycle
@GoodBicycle 10 ай бұрын
è per l'anima e per la conservazione della natura))))))
@francescoiannucci1689
@francescoiannucci1689 10 ай бұрын
La prossima volta prova a piantare anche qualche albero per la conservazione della natura
@IldefonsoMartinNovicio
@IldefonsoMartinNovicio 7 ай бұрын
list of materials used on this video, please, for easy purchase on our local hardware, thanks
@GoodBicycle
@GoodBicycle 7 ай бұрын
was that a question?
@IldefonsoMartinNovicio
@IldefonsoMartinNovicio 7 ай бұрын
@@GoodBicycle yes, please, thanks
@lancerturner79
@lancerturner79 7 ай бұрын
What grease do you use mate?
@GoodBicycle
@GoodBicycle 7 ай бұрын
For lube, we use thick calcium grease Divinol
@Ayoayo08
@Ayoayo08 10 ай бұрын
Did you use alcohol for removing the rust?
@GoodBicycle
@GoodBicycle 10 ай бұрын
including
@bobwilliamson5574
@bobwilliamson5574 11 ай бұрын
I tap the bearings out with a screwdriver, i don't have that special tool. Nice video.
@GoodBicycle
@GoodBicycle 11 ай бұрын
Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@wagwanyute
@wagwanyute 10 ай бұрын
im pretty sure you are destroying bearing life by tapping it out like that
@bobwilliamson5574
@bobwilliamson5574 10 ай бұрын
@@wagwanyute I replace with new bearings and press them back into the housing.
@piotrkreczmar4347
@piotrkreczmar4347 10 ай бұрын
Bardzo dobra instrukcja. Bez zbędnego pierdolenia.!!!
@GoodBicycle
@GoodBicycle 10 ай бұрын
Dziękuję za komentarz! 😍 jeśli podobał Ci się ten film, udostępnij ten film swoim znajomym ❤️ pomoże to w rozwoju kanału! 📈
@KennedyNdeda-s6l
@KennedyNdeda-s6l Ай бұрын
Great job brother
@GoodBicycle
@GoodBicycle Ай бұрын
glad to be of service! thanks for your feedback 😘
@alperenkaradeniz8482
@alperenkaradeniz8482 3 ай бұрын
Perfect service
@GoodBicycle
@GoodBicycle 3 ай бұрын
Thank you for your comment! 😍
@Ronin_Texas
@Ronin_Texas 8 ай бұрын
Aweson Video, well film and in great detail.
@GoodBicycle
@GoodBicycle 8 ай бұрын
Thank you for your feedback! 😘
@dperreno
@dperreno 10 ай бұрын
Those bottom brackets are not intended to be serviced, they are intended to be replaced. As others have noted, it isn't worth the labor to service them, and replacements are cheap.
@flexxx222
@flexxx222 10 ай бұрын
When the bearing shells are fine then you can even replace the bearings to quality items from a reputable manufacturer like skf.
@GoodBicycle
@GoodBicycle 10 ай бұрын
for the sake of content, you can serve)
@samteks125
@samteks125 10 ай бұрын
​​@@flexxx222Exactly, that would be the best compromise between throwing everything in the bin and reusing an old bearing which probably won't last long especially after pushing it out via the inner ring (as it will likely damage the bearing)
@matiasspesot7884
@matiasspesot7884 9 ай бұрын
Dont promote that thinking
@dperreno
@dperreno 9 ай бұрын
@@matiasspesot7884 Yes, I agree that it is wasteful.
@MJQuintana
@MJQuintana 6 ай бұрын
Nice trick on that bearing cap removal hahaha!
@GoodBicycle
@GoodBicycle 6 ай бұрын
glad to be of service! thanks for your feedback 😘
@likecycling82
@likecycling82 2 ай бұрын
멋진 정비 영상입니다.
@GoodBicycle
@GoodBicycle 2 ай бұрын
✊😘❤️
@abderrahmanegouasmi7556
@abderrahmanegouasmi7556 3 ай бұрын
very good job! je souscris!
@GoodBicycle
@GoodBicycle 3 ай бұрын
glad to be of service! thanks for your feedback 😘
@oryzacyclingchannel8352
@oryzacyclingchannel8352 5 ай бұрын
sangat menarik, saya suka video anda 😃
@GoodBicycle
@GoodBicycle 5 ай бұрын
Terima kasih atas tanggapan Anda! 😘
@izaak.salomon5048
@izaak.salomon5048 10 ай бұрын
Kotek jest cudowny! ❤️😼❤️
@GoodBicycle
@GoodBicycle 10 ай бұрын
Dziękuję za komentarz! 😍 jeśli podobał Ci się ten film, udostępnij ten film swoim znajomym ❤️ pomoże to w rozwoju kanału! 📈
@vanjuniorce
@vanjuniorce 10 ай бұрын
Apply grease to only one side of the bearing
@GoodBicycle
@GoodBicycle 10 ай бұрын
what happens if it goes both ways?
@vanjuniorce
@vanjuniorce 10 ай бұрын
@@GoodBicycle too much grease, the bearing gets a litle stuck, it is not completely free
@DJH3891
@DJH3891 10 ай бұрын
Basically an informative video, but i wouldn`t recommend removing a bearing by applying pressure to the inner ring (at least if your intention is to reuse the bearing), cause this loads the balls of the bearing in a way the bearing is not designed for. Always remove a bearing by applying pressure to the outer ring that attaches to the fit of the bearing
@GoodBicycle
@GoodBicycle 10 ай бұрын
thanks for your feedback 😘
@thangknowa3288
@thangknowa3288 10 ай бұрын
Or you can replace that sealed cartridge that comes with new bearings for only $20. One side is L.H. thread, other is R.H. thread, that state "Do Not Disassemble".
@GoodBicycle
@GoodBicycle 10 ай бұрын
is also a good option😇
@Darchful
@Darchful 7 ай бұрын
Retirando de esa forma el sello, aplicas demasiada fuerza, retiralo con una pequeña aguja o pinza de electrónica redonda plana, no se dañan los labios de esta manera.
@GoodBicycle
@GoodBicycle 7 ай бұрын
¡gracias por el consejo ! 😘
@Kid47483
@Kid47483 10 ай бұрын
Is that an ultrasonic brush or just an electric toothbrush? 😅
@GoodBicycle
@GoodBicycle 10 ай бұрын
This is an electric toothbrush, very convenient😉
@黄辰旭
@黄辰旭 11 ай бұрын
The crankarm is prowheel, The manufacturer of SRAM.
@GoodBicycle
@GoodBicycle 11 ай бұрын
possibly
@Przemyslaw-H
@Przemyslaw-H 11 ай бұрын
Teraz lepsze niż z fabryki😉
@GoodBicycle
@GoodBicycle 10 ай бұрын
hmmm)))) oczywiście, że jest lepiej!!!)))))
@didiercarrera4380
@didiercarrera4380 10 ай бұрын
What's the price
@GoodBicycle
@GoodBicycle 10 ай бұрын
20$ +-
@expert0509
@expert0509 10 ай бұрын
Very good!😊
@GoodBicycle
@GoodBicycle 10 ай бұрын
thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘
@damirkolar5197
@damirkolar5197 9 ай бұрын
At least metal parts (bearings) as they are 100% recyclable, should be replaced. Ones refurbished are still rusted. If you can hear them spinning, they are no good.
@GoodBicycle
@GoodBicycle 9 ай бұрын
interesting comment 👍
@markfletcher4605
@markfletcher4605 10 ай бұрын
Threaded bottom brackets like this are often so inexpensive that it is better to replace the entire bottom bracket than attempting to clean the bearings.
@GoodBicycle
@GoodBicycle 10 ай бұрын
Thanks for the comment, maybe you're right.
@Jose-bm9rf
@Jose-bm9rf 10 ай бұрын
Fat overload Too much fat is not good for softness. only grease one side of the bearing I'm sorry for my English
@GoodBicycle
@GoodBicycle 10 ай бұрын
maybe you're right.
@RVéSpecVW
@RVéSpecVW 10 ай бұрын
Ne možná ale určitě má pravdu 👍
@Jose-bm9rf
@Jose-bm9rf 10 ай бұрын
@@GoodBicycle gracias por aceptar mi comentario BEST regards from Spain
@mahermoussallati791
@mahermoussallati791 10 ай бұрын
Well done 👍
@GoodBicycle
@GoodBicycle 10 ай бұрын
glad to be of service! thanks for your feedback 😘
@anonymously241
@anonymously241 10 ай бұрын
Can I borrow your bearing puller my friend? 😩
@GoodBicycle
@GoodBicycle 10 ай бұрын
of course))))))
Replace the drivetrain of a bike. How to upgrade your bicycle.
11:34
Nice Bike Service
Рет қаралды 35 М.
Speed up your bike. How to lube a bicycle wheel hub
10:04
Nice Bike Service
Рет қаралды 103 М.
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
How to service bicycle fork. RockShox fork lockout repair
16:14
Nice Bike Service
Рет қаралды 121 М.
Why does a bicycle chain jam? How to fix a bike gear system
13:22
Nice Bike Service
Рет қаралды 19 М.
Why is it difficult to ride a bicycle? Hollowtech bottom bracket maintenance
10:29
How to properly wash and lubricate bike hub. Make your bicycle run faster.
10:03
My bike needs repair. How to replace a bicycle hub. Tutorial
15:57
Nice Bike Service
Рет қаралды 40 М.
How to PROPERLY shift gears on a bicycle?
16:56
BikeGremlin US
Рет қаралды 1,5 МЛН