[HOW TO] CYMA CM.009F XM177 E2 DISASSEMBLY - Internal Review

[@NepaAirsoft]

Great Video. Looks like CYMA is stepping up their game!!

[@charlesfrederick8285]

Brother after seeing this comment section and your willingness to help you got my sub. I have this very rifle and it shoots great and hits hard out to 40 yards but I’ve hit shots out to 60-70. I’ve played lots of games with it no problems so far and I’ve not been easy on it.

[@Dan-Dan46]

Thanks I’ve been struggling to get my receiver apart I’ll try your little trick with the charging handle !

[@critter0]

like your reviews. for future reference pls measure the stock nozzles on those cheap guns coz they always come with no o-rings, and its the first thing must be changed.

[@mezeizsolt2147]

Hopefully they will keep up the good quality in the future, lovely disassembly video mate :) .

[@c.robtoz]

Very helpful video ! Got a question tho, what gear ratio is that ? 16:1 ? 32:1 ?

[@PheasAirsoft]

Hello! Glad you found it helpful! The standard cyma gear ratio is 16:1 to one I believe. Pheas

[@c.robtoz]

@@PheasAirsoft Wow thanks a lot for the fast reply :) Cyma really is improving which I love 💯 Edit: Tbh your breakdowns really are amazing, definitely subscribed 🤙🏼

[@williamsauthier6746]

Hi pheas airsoft can you do a tutorial to rear wire this replica please?

[@backseatswitchyy]

Really useful considering I'm really thinking of buying one. Didnt know it had Dean's as evike stated Tamiya

[@PheasAirsoft]

Glad I could help you out! Pheas

[@7yfeD]

What kind of screw did you use to take off the moderator?

[@PheasAirsoft]

I think it was a T6 (Torx) head (maybe a little smaller) to remove it. Pheas

[@crispminer]

I was looking to upgrading this gun but i dont know which gearbox this is specifically. Could you maybe tell me the gearbox name or link it on a site, thanks

[@PheasAirsoft]

Hiya. The gearbox in this is a version 2 gearbox. Good luck! Pheas

[@Ironcurtainproductions]

Will this gun handle an 11.1 lipo well because of the mosfet? And is it programmable?

[@PheasAirsoft]

Hello! It is not programmable unfortunately, the initial batches seemed to not like 11.1v lipos, but the new ones are happy to go with 11.1v now! Pheas

[@raywu1762]

can you remove the ring on the barrel behind the flash hider

[@CommissarPantherAirsoft]

I got the screw out for the muzzle, but it's stuck in place! What can I do without using something to damage the muzzle? It's 14mm negative.

[@MediaevalJames]

It's just glued (if you haven't already solved this, you can even see the white flakes in the video). Just dip the muzzle into some warm water and give it a clockwise twist, it's metal so I wouldn't expect any damage even if you brute forced it without warm water.

[@jakeru550n5]

Hi I’m thinking of buying airsoft sniper but I’m not shore what to go for any recommendations

[@alvareichon]

Cool, taiwangun should hire you 🥰

[@PheasAirsoft]

Would be a dream come true ha Ha. Pheas

[@anzen7915]

スプリングガイドが太過ぎて、内径の細いM160とかのハイレートスプリングが嵌まらず組み込めないのが残念なんだよな・・・😭

[@crispminer]

7:51 is when he opens the buffer tube Note for myself

[@gees1138]

Can you remove the M203 washer ring @2.14? or is it fixed to the barrel. I'm looking at purchasing one of these to convert it into a 733 commando with a standard A2 Flashhider

[@PheasAirsoft]

That ring does come off . Pheas

[@nonk9816]

I had a connected break on one of mine

[@javiagramunt]

Thanks!! Really helpful

[@turtle_6067]

Is it a good mosfet or would a Titan or perun v2 be better?

[@PheasAirsoft]

Hiya. It's ok at best, it serves a purpose and replaces the standard switch and makes it a little more efficient, with all the chips on it I can't help but think it should be programmable but doesn't seem to be any evidence of documentation, a Perun or a titan will be much much better option if you have the money to get one and offer a lot more features. Pheas

[@ryanloynes8528]

👌🏻👌🏻👌🏻👌🏻 great video pheas

[@freetobe3]

Can the big metal ring on the outer barrel be removed? The one right next to the moderator?

[@PheasAirsoft]

Hello! I think it does / will come off if you didnt want it to be there. I think it is supposed to be there in keeping with the accurate look. This is all assuming you mean the muzzle break? Pheas

[@freetobe3]

@@PheasAirsoft I mean the step up part of the barrel where the muzzle brake/moderator sits flush.

[@PheasAirsoft]

@@freetobe3 Yep, it is what I thought it was, then it will come off. Pheas

[@Cykaa226]

Do you know the lenght of the nozzle by any chance?

[@PheasAirsoft]

I do not, sorry! It's only recently that I've started to measure the nozzles that are included. Pheas

[@Cykaa226]

@@PheasAirsoft Guess I'll find out when i open it, I got myself the shorter E1 model and so far i couldnt be more happy with it. In the meanwhile they had some sort of a revision. Delta ring is correct now, also the lower reciever with no stops around the mag release and they ditched the old m4 style hopup in favor of rotary hopup. Got myself proper slim handguard and couldnt be happier with the purchase.

[@wretch1300]

Can I change the 2 position buffer for a regular one?

[@PheasAirsoft]

Hiya. Yes indeed you can, it is just a normal airsoft buffer tube spec so will be a quick and easy change! Pheas

[@wretch1300]

@@PheasAirsoft wow that was quick. Thanks a lot!

[@knightairsoftwarrior]

Whats the length of the inner barrel?

[@PheasAirsoft]

Hello! It's listed as 300mm in the product description on Taiwan Gun. Hope that helps! Pheas

[@MuscleFlexPro]

is this better than the CYMA mp5 that you have reviewed iris that better? if i have to choose just one

[@PheasAirsoft]

Hiya. That is a touch one. The mosfet is cool on the surface, but people seem to be reporting a 50:50 on if the mosfet lives forever or burns out. I have replaced two for people already myself. But they are excellent quality and would happily take another optical mosfet or a wired one (video on the one I did coming soon)... If it was my choice... I would go for this one. But The internals a a little better (other than the mosfet) and I prefer the overall look of this too, and the capacity of the mags is a little better as well. Hope that helps! Pheas

[@MuscleFlexPro]

@@PheasAirsoft thanks because I love the look of this as I want to recreate Larry vickers ar or Robert deniro look in the movie heat. I wouldn’t be able to to change the mosfet if it brakes that could be an issue

[@PheasAirsoft]

@@MuscleFlexPro There are plenty of guides to help you if you are handy with tools to repair it, there are also plenty of airsoft techs about that could sort you out. If you are in the UK, I do tech work and could happily sort it out for you, if it broke. Pheas

[@MuscleFlexPro]

@@PheasAirsoft I’m in Ireland unfortunately where can I find those guides online pls? Thanks my friend

[@PheasAirsoft]

@@MuscleFlexPro HEre is a link to my install of an after market mosfet: kzbin.info/www/bejne/iqTRaoaXrsSfh6s in a cyma with the exact same mosfet. Pheas

[@LMan623]

Do you happen to know the inner barrel length?

[@PheasAirsoft]

Hiya. The Taiwangun listing for it stats 300mm, which I think sounds spot on! hope that helps! Pheas

[@rayhanhussain4997]

I have the cyma cm.007 and I cannot for the life of me figure out how to remove the muzzle to gain access to the 14mm threads. Help please !!

[@PheasAirsoft]

Hello! Is there a little grub screw under the muzzle break? Usually is one, just loosen it off then the muzzle will unscrew the opposite way to normal. Hope that helps! Pheas

[@alphakronos7297]

Does it come with an orange

[@alphakronos7297]

Tip

[@PheasAirsoft]

@@alphakronos7297 Hiya. If you are in the US then I believe by law they have to, in the EU they can be fully realistic, so it came as you can see on the video to me. Pheas

[@alphakronos7297]

Thank you

[@jzflq5721]

whats the fps on it?

[@PheasAirsoft]

Out of the box from the factory, they are about 400 to 420 fps. Pheas

[@maxie706]

"In theory... there is a gap" repeat x20

[@paperbackwriter...]

soon hes gonna get an rpd and just hip fire it with its 1000+ round mag but he'll modify it so it shoots like 30 rounds per second. I feel like he'd have to much fun with it. (This isnt true, its a joke unless pheas wants to make it happen)

[@PheasAirsoft]

don't tempt me.... please don't tempt me. The cm.028 we had on the channel is currently going through a project (with videos) for something similar to this, with a high speed motor, 12:1 gearset and a mosfet to see what I can get out of it, and a comical paintjob. It will be the "AddidAK" project, that should just about hint enough at what it will look like! Maybe the RPD will be the next one ha ha ha Pheas

[@paperbackwriter...]

Pheas Airsoft can’t wait to see the finished addidAK when it is completed. Should get a drum mag if you can for the addidAK it’ll be funny I think

[@jacobvillarreal6805]

Has anyone tried rearwiring this?

[@PheasAirsoft]

I haven't, but the openings are all there for it to be relatively easy for someone todo! Pheas

[@TermusJar]

Its practically same as their other new gen of old m16 serries. Worst part hop unit that cyma puts in are horrible in these . I have the xm16a1 maybe one day il get one like in this

[@PheasAirsoft]

The hop units are a bit naff, considering they are now doing the tight bore and the mosfet, hopefully it wont be long until they do a better quality hop unit. That said its not to hard or expensive to drop an after market hop in it. The hop rubbers i find are pretty good. Pheas

[@munk7120]

i hate american import laws, getting the muzzle off this replica is a fucking death sentence to the barrel assembly,

[@Ironcurtainproductions]

What should I do if I can’t remove the muzzle brake, are there any ways to fix this? Could it be Thread locked on out of the box?

[@PheasAirsoft]

Hello! Check for the grub screw underneath first, if there is remove that, if not then remember is comes off counter to what a normal thread is. It could be that a touch of thread lock has been applied... So might need some grips and a bit of brute force, but don't forget it goes the opposite way to a normal thread... So lefty tight righty loosy! 😂 Pheas

[@Ironcurtainproductions]

@@PheasAirsoft Thank you for the info! I really wanted to attach a 200mm suppressor to hide a longer inner barrel I may install. Yes I removed the screw but it didn’t budge. I’ve also tried brute force. I’m really annoyed they fastened the flash hider so tightly on.