How to Debaffle the stock exhaust on a 2006 Suzuki Boulevard C-50.
Пікірлер: 278
@aaronfafalios16 жыл бұрын
Best video I found on this. After ordering an exhaust system for $450 they sent me the wrong parts so now I have to return the exhaust. I went to home Depot, bought the drill bits for $30 and did it exactly how you did here and voila, it sounds just how I wanted it to. Now I can use the money from the other exhaust system for custom chrome. Thanks for the vid!
@aliceapelletier3 жыл бұрын
Hi! It’s been like years, but do you still remember which drill bits you used in the video? My bf tried, but the one he bought didn't work😬
@rogerhurd64346 жыл бұрын
Funny how so many people hate on this guy modding his bike. Since you are too childish in the mind let me give you some valuable advise. Things do not last forever, you do not last forever, stock exhaust is cheap as hell due to most people trashing them and buying aftermarket. Why do you give a shit about what someone else does to their own property? It is simple if it floats his boat then good to go even if it has negative ramifications.
@LestatThirteen6 жыл бұрын
Danny, I'm amazed at the amount of negativity in the comments. Obviously a lot of these people have never ridden a motorcycle. I THANK YOU for your video.
@msiddi015 жыл бұрын
Unfortunately he will be dealing with burnt valves soon. But at least his bike will sound cool until that time.
@theone2be335 жыл бұрын
@@msiddi01 and why would he have burnt valves? They're not working any harder. And he didn't completely debaffle the pipes.
@anthonyrobinson3875 ай бұрын
Isn't it illegal
@BigButtocks9674 ай бұрын
I did this on my bike about 9 years ago, since then iv covered about 30000 miles with no problems whatsoever. You sir are talking shit.
@SchofieldRacing8 жыл бұрын
If by "ruined" you mean, made it sound and run better, then yes I ruined it. It's hard to keep up with kids lingo these days.
@JustJohnnyIV6 жыл бұрын
Awwww da widdle guy god his fewlings hurted
@pfczimmerman916 жыл бұрын
I've had plenty of bikes with the baffles taken out and they did sound like s*** this particular bike sounds like a moped with stock pipes I took the baffles out and it sounded perfect nothing crazy no backfiring and not really that loud
@criticalcaleb6 жыл бұрын
Fantastic easy mod. The manufacturer baffles sound and has the resonators in there for a reason... to keep emissions down and noise because they are governed to. This just makes the bike sound like they wanted it to sound in the first place.
@dustym.1114 жыл бұрын
Kids also bicker
@Morteexx3 жыл бұрын
Sooo you can always weld the baffler on the plate, and the plate in the exhaust. I think that will work :) Gonna do this on my M800 intruder, looks like det same exhaust.
@stephenhadley24907 жыл бұрын
Best part about your mod is that if something goes wrong you can buy a set of used stock pipes for next to nothing or buy a set of V&H and throw these in the bin.
@chimpchimperton7 жыл бұрын
I don't think people on here know there is another set of very restrictive baffles up further in each pipe. This mod does not make it an open pipe exhaust.
@justauser Жыл бұрын
That's totally fine, it just sounds better that's all we want
@Mafioso629 Жыл бұрын
That’s actually could be the best of both worlds
@chimpchimperton Жыл бұрын
@@Mafioso629 It sounded great. Not too loud, not too quiet. But, personal preference I guess.
@Mafioso629 Жыл бұрын
@@chimpchimperton I'm thinking about just removing one baffle. I have a c90
@chimpchimperton Жыл бұрын
@@Mafioso629 One baffle in each pipe? That would sound good.
@pfczimmerman916 жыл бұрын
I'm pleased with the results after doing this it up the sound a little bit from a moped to really the sound of a 250 motorcycle that's got a nice smooth sound to it no backfiring I live in South Carolina so there's no emission laws like California Loud pipes save lives
@Solo_adv4 жыл бұрын
Thanks for your time and consideration in making this vid. I just bought a 2004 vl800 and did the same thing your video helped me
@keithsawyer66683 жыл бұрын
Some of you guys must be real fun.at parties. Lol
@ganonpig2 жыл бұрын
Just finished this mod on my bike earlier today while swapping tires as well. I gotta say, it feels like I'm riding a new bike now. Just the pipes alone sound so much better than they did before. It actually sounds like a real bike now, and not some overpowered moped, lol. Thanks for the awesome vid 👍
@GaRoofRescue2 жыл бұрын
Will this cause any issues to the bike?
@ganonpig2 жыл бұрын
@@GaRoofRescue not really. Some people have said it might mess something up on carbureted bikes but mine still runs just fine after I took them out
@jacobdill8972 ай бұрын
Imagine sticking a broomstick up your tailpipe and calling it a "mod" 😂😂😂😂😂
@ganonpig2 ай бұрын
@@jacobdill897 Jokes on you bud... I didn't even use a broomstick
@tommeytommey27425 жыл бұрын
Nice tutorial! Well spoken, straight to the point, well done!
@ucebuflash5 жыл бұрын
I didn't even know that 'debaffle' was a word!....how many points in scrabble?
@SchofieldRacing8 жыл бұрын
Steph, I didn't change anything on my bike after doing this, but I love in a pretty warm climate. I don't know if changes would be needed in other climates. I can say that it's been a year and a half since I did this and I STILL don't regret it. :)
@HemiLyfestyle7 жыл бұрын
Danny Schofield do you think the bike is a good beginner bike? I'm 5'5 weight 130
@SchofieldRacing7 жыл бұрын
Contane 21, Yes I think it would work for a starter size. However, I think a Honda Shadow 750 would be better for you. It's a little smaller and lighter but still really fun to ride.
@HemiLyfestyle7 жыл бұрын
Danny Schofield awesome the dealership is actually selling that bike too. Thank you so much, I think I will go for the shadow
@SchofieldRacing7 жыл бұрын
Cool, you will like it!
@rhondaparks64855 жыл бұрын
Mr. Danny, Thank you for creating this educational video!!! I will be taking your advice. The abundance of negativity here is sickening!!
@buster11733 жыл бұрын
I took a drill bit and board four holes on each pipe and if I didn't not like that sound I would do two more on each pipe until I get the sound that I liked. Now the problem was I did that with an 03 Volusia with the carburetor and they had to readjust the carb. I just thought I'd bring that up if anybody who tries this if they take off and there's a lot of hesitation you need to get that carburetor adjusted
@ganonpig2 жыл бұрын
damn. And here I was about to order a whole new set of aftermarket pipes (which probably would have costed hundreds). Now is also the perfect time for me to do it since I gotta change my rear tire anyway, not that I need the bike jacked up in order to do that, but still, 2 birds with 1 stone. Home Depot here I come!! **UPDATE** I actually went to harbor freight instead of HD. They had a better deal on a cordless drill kit, as well as a 1500 pound Motorcycle lift jack, which will definitely come in handy for removing my rear tire since it went flat the other day (Shinko is a garbage tire brand BTW, probably gonna get Pirelli or something else next)
@garrettlarson8311 Жыл бұрын
I did the same thing but shoved two cherry bombs in with some titanium tips! Really nice sound!
@tooljst85 жыл бұрын
Sounds good! Bet there are multiple baffles in there. It's his bike, he can do what he wants. He's not forcing anyone to do it but was nice enough to make a video to show "how-to" in case you did want to.
@theone2be335 жыл бұрын
So if i want to do it can do it if i want. But if i dont want to do it i dont have to. Thanx for that. Wasn't sure if i could do it or couldn't do it.
@tooljst85 жыл бұрын
@@theone2be33 dunno man. Some people don't like It when You do what disagrees with them.
@theone2be335 жыл бұрын
@@tooljst8 well if we all did what everyone else does then we wouldn't be individuals. Therefore we ARE individuals because we DON'T do what everyone else does. Everyone else is a self absorbed pitiless society of fucktards. IMHO! Just saying
@tooljst85 жыл бұрын
@@theone2be33 Thanks for doing what you want bro. And thanks for sharing. And if a woman says, "Do what you want" Make sure you second guess yourself before you wreck yourself.
@theone2be335 жыл бұрын
@@tooljst8 women are DEFINITELY like that! Lol
@MrBiggDoggB7 жыл бұрын
I am thinking of doing this to my c50. Are you still happy with the result? And has it effected the performance at all! Thanks.
@SchofieldRacing7 жыл бұрын
MrBiggDoggB I am still very happy with it, no issues with performance at all plus a little extra on the top end. If you live in an area with extreme weather or drive in the rain a lot spray paint the inside of the pipe with high heat black paint to prevent rust. I don't drive in the rain and don't have rust issues. 🙂
@michaelreich51544 жыл бұрын
Followed this video and worked out great..A little work to get them out but well worth it. Thanx..Sounds super. Cost me $16 for the saw kit at Harbor Frieght.
@kenniitran2 жыл бұрын
I will go to Harbor Freight later and I wonder what saw kit you get if you don't mind. Because it is impossible for me to stack two hole saw on one as in the vid. Thx
@ryanp.39355 жыл бұрын
Hey Danny, I’ve got the same bike but it’s a 2013. Same pipes I believe too so I should just be able to do the same thing you did in your video to mine right? I like the exhaust but it’s a little too quiet for me.
@SchofieldRacing5 жыл бұрын
I believe the 2013 is the same. Just measure the inner and outer diameter before purchasing the bits. I think you'll like the sound...
@back2nature782 жыл бұрын
Good day, love the video! Can you please tell me the name of the hard saddle bags you have? They look amazing. Thank you
@Mostvisible2 жыл бұрын
Hey Danny, is there any special modifications to combine the hole saws together?
@SchofieldRacing2 жыл бұрын
The bit had just enough space that I was able to screw both on. Obviously the biggest one first.
@corycc835 жыл бұрын
Very helpful video. Going to do this myself. Are your handle bars stock? They look low and swept back.
@SchofieldRacing5 жыл бұрын
Yes stock as far as I know... I think the Boulevard had a few different configurations.
@stalone0075 жыл бұрын
Danny. Comparing to the other methods, this is by far the best. I did the mod to my Vulcan 900. Thank you
@titoperaza16 жыл бұрын
Thanks for Video !! I do like your saddle bags ? Can you provide the brand I have a 2012 C50T? Thanks
@SchofieldRacing6 жыл бұрын
titoperaza1 I will have to look when I get home tomorrow. They were already on it when I bought the bike a few years ago.
@themetricrider97654 жыл бұрын
Plz make a update to this I also love those bags
@jasonsanderson93853 жыл бұрын
Bags are very nice, if you could definitely post up name of saddlebags be greatly appreciated
@douglapointe68105 жыл бұрын
Straight to the point. Good video.
@NCHAAK4 жыл бұрын
Hey Danny, I just bought a 2013 C50T. Saw your video and am thinking about doing this to mine. How loud are they at high RPM's? Does it just make them deeper sounding or do they get really loud at higher speeds?
@ganonpig2 жыл бұрын
I just finished doing this mod to my 07 C50 earlier today. It sounds great and honestly does not sound too loud going at higher speeds on the freeway. The stock pipes are insanely quiet to begin with, and from what I understand, these baffles at the very end aren't the only baffles in the stock pipes. I love the way my bike sounds now. It's not quite as loud as your typical Harley, but its damn close and definitely has a deeper pitch to it now. Before, these pipes were so quiet, it didn't even sound like a real bike. Now it sounds like a true bike and I feel like I can get an approving vibe of any other bike enthusiasts I pass by. And besides, even if it is too loud for some people, #LoudPipesSaveLives
@NCHAAK2 жыл бұрын
@@ganonpig I went ahead and did mine last year after I submitted that question, and yes...they sound great, lost about 7 to 10 miles per tank but I can live with that......
@ganonpig2 жыл бұрын
@@NCHAAK really? I didn't think this mod would have that kind of affect. Are you sure it's because of the mod and not something else? I'll have to ride mine around more and see if my mpg changed much
@jonathangill90814 жыл бұрын
What about the 1st stage baffles? You removed the 2nd stage only
@577buttfan Жыл бұрын
I thought it didnt have that raw straight pipe sound..still sounds better though.
@chromevanadium5825 Жыл бұрын
A urine therapy to make good bike worse. C'mon! get normal pipes and a fuel manager!
@risanch6 жыл бұрын
I wish I would've seen this earlier. I just installed a set of Vance & Hines Cruisers. I love them but I would've tried this first to see if I'd like the sound. Because I get a lot of compliments from my V & H's Cruisers. Especially with baffles out.
@jacobdill8972 ай бұрын
Next show us how to get rid of those teeny tiny saddlebags you got on that thing. They look like cellphone cases
@jorgee.689 жыл бұрын
Does this work for a 08 boulevard m50?
@codaexile073 жыл бұрын
Hey I have a brand new boulevard in gonna do this
@riceburnerbiker14834 жыл бұрын
I got a C90T with cobra after market exhaust. It’s quiet when I want it so..! And sounds off like a HD when I want it so.... I was lucky, I bought it used, with 6700 miles on a 2008 less then 4 years ago. Guy that owned it before , liked looking at it in the garage. It looked and still drives like brand new. Nearing 40.000 miles... I ride it all the time. New tires, change oil.... that’s it! Try and buy a HD that’s shiny and new for 4K.... 90 cubic inch... 1500cc.... I stole this bike🤗
@kevinholzherr97478 жыл бұрын
hey nice video. have a question i have a suzuki intruder m800 2006 and it has the same pipes like on your bike. can i do it the same? thx
@graywolf25964 жыл бұрын
Hay, did you do it ? I have vs800 03 thinking about it.
@idnyst4 жыл бұрын
Thanks, I'm glad I found this video, I'm looking forward to see how it will work towards my bikes.
@marloq65635 жыл бұрын
Hey where did you purchased your side bags?
@SchofieldRacing5 жыл бұрын
They were on the bike when I bought it. I found some on eBay around the same time but that was several years ago. I still have the bike though.
@MikeJones-fv1fe3 жыл бұрын
I've noticed this video is 6 years old. Did you notice any negative engine performance in the long term? I just bought one of these bikes last summer. Really like it and I've thought of doing something similar but just a little leery.
@SchofieldRacing3 жыл бұрын
I just sold that bike about 4 months ago exactly how it was in this video. Never had any issue with running, performance, or anything. The ecu self calibrates air/fuel mixture so no tune needed either.
@MikeJones-fv1fe3 жыл бұрын
@@SchofieldRacing awesome. Most of the videos I've seen are on the previous models that were carbureted. Love mine so far. Might do this. Thanks for the video and the reply.
@bamaboysmith27235 жыл бұрын
Im am doing this today on my 09 buy c50t..will i have to add a fuel commander or any of that stuff...???
@SchofieldRacing5 жыл бұрын
Nope, the fuel injection system will calibrate on its own. You can add a commander if you are also wanting to add power, but not necessary on a 2009 C50.
@bamaboysmith27235 жыл бұрын
@@SchofieldRacing thank u
@truthfilterforyoutube82183 жыл бұрын
so hard to tell what the bike sounds like . You need to do a couple driveby's with the motor under load !
@kenniitran2 жыл бұрын
NIce vid Thx. May I ask how you stack the two hole saws together? because it seems imposible for me to stack them for drilling all at once. Thx
@SchofieldRacing2 жыл бұрын
The bit I bought had just enough room to add 2 bits. Seems like it was Milwaukee from Home Depot.
@kenniitran2 жыл бұрын
@@SchofieldRacing After searching, I think I should buy a so called "Bi-metal Hole Saw" which I can stack two saws fine. Thx bud.
@TheRobynhud4 жыл бұрын
Brilliant Danny cheers ,sounds great. Will follow suit. Have done other bikes just by a long drill bit always an improvement.
@colindavis21663 ай бұрын
It took me forever to do this. The plate was easy to remove but on the newer models there's a thicker weld on the inside baffle. I just rode around without the plate for a while. I would wiggle the baffle occasionally. One time when I was riding the lower baffle came out while on the road. I didn't see where it went. The top pipe was still baffled, a few months ago I saw that it was very loose but the flange was still hung up on the inside. After wiggling it and using pliers I managed to get it pulled out. The bike sounds a lot better. I still would like to get new pipes put on at some point.
@rmendoza5953 Жыл бұрын
After watching another video on a person who changed his stock pipes and air filter doesn't mean your bike is going to run faster or give you more horse power, all your bike is going to do is make more noise. In fact you could be losing horse power because your bike's computer isn't programmed to the modifications you did to your bike. The other video the bike was put on a dyno and it's computer was reprogrammed to run with the new modifications.
@Tyler2Wheel4 жыл бұрын
Nice video thanks! Im just got the two hole saw drills and a broom handle, trying this on my C90 now
@andrewcavazos81814 жыл бұрын
How’d it work out for you?
@ОхотаиРыбалкапокайфу Жыл бұрын
Здравствуйте.непропадает ли мощность? глушитель имеет сопротивление.нужно настраивать компьютер после этого?
@milanstojic32956 жыл бұрын
I've got a c109r. Going to try this this weekend. With 1800cc ut should sound much louder :-) hopefully baffles are similar in my slipons. They look almost the same
@robbymontg8 жыл бұрын
Danny thanks for vid followed it step by step on my 06 50 and i love it thanks again sir
@JohnWick-j6v9 ай бұрын
And doesn’t this screw with your fuel injection / fuel to air ratio and make you bike run horribly
@VinEllis7 ай бұрын
No… it’s just baffles. It doesn’t remove the catalytic converters further up in the pipe. All the baffles do is make the bike quieter. If it fucked up your fuel ratio and makes your bike run horrible, what do you think happens when you put in aftermarket open exhaust?
@scottfarrellisnow6 жыл бұрын
there is always some crackhead doing this shit to their bike. lol ! you can get a really nice Cobra system and remove the baffles easily without having to hack them, and sell your stock system on ebay to lessen the expence.
@rroach2097 жыл бұрын
Have you changed the spark plugs since doing this? Wondering if the bike is running more lean or rich? Ive done this recently and was thinking of adding a K&N filter but dont want to lean it out more than what it should be..
@SchofieldRacing7 жыл бұрын
Robbie R, I have not changed plugs. I did a lot of research prior and since it is fuel injected it should calibrate itself. If your bike has a carburetor it will have to be adjusted. Let me know if you have any issues, I would like to add a K&N to mine as well.
@rroach2097 жыл бұрын
Danny Schofield ok im due for new plugs, once i pull them, that will tell me if they are running to lean or not.
@SchofieldRacing7 жыл бұрын
Awesome!
@mitchellboyd52567 жыл бұрын
Im not sure when they went efi but the fuel injected ones should be able to compensate for the extra flow from a few bolt ons.
@davidblevins68086 жыл бұрын
Robbie R 9
@tinarowland41205 жыл бұрын
Had someone drill holes in my exhaust on my Boulevard 2005, is a little louder, do I need to have the carb or anything adjusted now ?
@SchofieldRacing5 жыл бұрын
I didn't need to adjust mine because it's fuel injected, I believe a 2005 is also fuel injected. If it is carbed then it will likely need adjustment.
@tinarowland41205 жыл бұрын
Btw mines a S40 so pretty sure it's carb
@rickg.51712 жыл бұрын
Thanks for posting.
@hearsejr5 жыл бұрын
On the 05 mine is fuel injection.. what did you have to do with the fuel system before you can cut the baffles out? Mine runs rich as hell most of the since I bought the bike with 2500 miles on it back in 07.. now I got 95k on it and it still runs rich... I have not touched the exhaust yet...
@SchofieldRacing5 жыл бұрын
I didn't change anything with my fuel system before or after removing the baffles. If your system is working as it should, it will automatically calibrate with the change of the Air/Fuel mixture. You may have a bad Air/Fuel ratio sensor causing it to run rich.
@hearsejr5 жыл бұрын
@@SchofieldRacing kewl I been trying to find what could cause it to run rich. Where is it located on the bike? I got the hole saw dril but I got to see if there is one big enough.. I can't remember the sizes. Thanks, I appreciate the ideas on the fuel problem.
@SchofieldRacing5 жыл бұрын
Google "2005 Suzuki Boulevard Oxygen Sensor Location" 🙂
@hearsejr5 жыл бұрын
@@SchofieldRacing hey Danny, I tried to look up o2 sensors on my bike.. it doesn't have one. Instead it has a pair valve that allows fresh air in to the exhaust after it leaves the cylinder. They main complaint is they get stopped up and the bike popped back through the exhaust. Mine was just out right running rich. So I followed the guys advice, and for the first time since '08 my bike will idle on it's own and smooth as silk without having to rev up the engine to keep the bike running. I'm extremely happy at the moment. Thanks for encouraging me to do a Google search that has cured a problem the Honda shops couldn't.
@SchofieldRacing5 жыл бұрын
@@hearsejr Awesome, we both learned something today! Thanks for the update.
@SchofieldRacing8 жыл бұрын
Kevin, if the pipes are the same it should work. But again, mine is a Boulevard so I don't want to say it is the same.
@ashleyharris41037 жыл бұрын
the c50 is a boulevard
@enriqueaguirrebrito7986 жыл бұрын
I have an intruder vl800 i guess it's the same. C50 is the name in usa
@raullong859011 ай бұрын
Thank you very much very helpful video may god bless you for sharing this how to do it yourself video 👍 great video .
@davidlevesque2763 Жыл бұрын
Hi I want to do this to my wifes bike, however how did you stack the hole saws? I cannot get both to secure on the arbor?
@amanrdx92 Жыл бұрын
Thank. I just did it today. Only thing 2nd bit 1. 3/8 inch. Thanks for help
@Stranglerxx775 жыл бұрын
Hare Krishna my method is to whack a sharp rod of steel with a hammer 🔨 Motörhead style thus making a hole
@Fellowrser6 жыл бұрын
Okay please help I have a 2000 v star and the baffle already broke off the weld but it's stuck loose in there because there's a metal plate and I can't get it out
@Crystalhatcher684 жыл бұрын
I wish I knew why I can’t get the 3” to cut. I’m using a bi-metal hole saw made by craftsman. The 1.5” hole cut perfect (I was unable to fit both sizes on arbor) but now I can’t get the 3” cut. It frustrating.
@gregs7519 Жыл бұрын
Thanks for the video. I followed your advice about the dual hole saws and it worked great! Sounds a million times better now too.
@steph7998 жыл бұрын
I put Vance and Hines on my wifes Road Star but I had to change the carb jets..I know this is fuel injection but is there anything you have to adj for fuel flow????? Thanks for the Video
@pyramidflipover88644 жыл бұрын
your saddlebags look awsome!! what brand is that?
@SchofieldRacing4 жыл бұрын
I bought them off eBay. There are several sellers that have them. This link is for a seller with the same ones but I did not use this particular seller, just FYI www.ebay.com/itm/172034056373
@Tyler2Wheel5 жыл бұрын
Nice video 👍🏼 I just bought a C90 and Im gonna remove the baffles
@samsquanchchronicles4 жыл бұрын
Hows it sound? I just bought a c90 myself
@Tyler2Wheel4 жыл бұрын
Kevin Joyce didnt do it yet, just got the parts and going to attempt it today or tomorrow
@jeffstone26018 жыл бұрын
GOOD JOB MAN!!! SALUDOS DESDE COLOMBIA!!!
@702xRyder6 жыл бұрын
bout to do this to my enduro
@TheJimboqwerty Жыл бұрын
I am curious: What decibel reading do you get after removing the parts?
@pugestpug58794 жыл бұрын
This sounds like my c50 boulevard, I bought it off some family and they cut the exhaust right back, I don’t know if your exhaust is the same but when my dad test rode it we heard it the whole time and he went far
@mora9426 Жыл бұрын
What kind for saddlebags are those..? They look sweet...
@hcamardelle4 жыл бұрын
Can I ask what bags those are Danny? Going to look at this same bike today.
@SchofieldRacing4 жыл бұрын
I searched "hard saddle bags Motorcycle" on eBay and found them. I just looked again and found them again but they don't have a brand name. They are listed for $79.50 for the set. I like them, no issues.
@hcamardelle4 жыл бұрын
@@SchofieldRacing Do they remove easily or are they hard mounted/permanently attached?
@SchofieldRacing4 жыл бұрын
@@hcamardelle They bolt on, you could take them on and off but not by pulling a pin or anything.
@SUPERMAN_13 Жыл бұрын
Just came across this video. I am curious if you had to mess with the fuel/air at all when taking the baffles out?
@VinEllis7 ай бұрын
It’s EFI. It will automatically adjust b
@sonichives15 жыл бұрын
Did I miss how you combined the two drill bits ?
@SchofieldRacing5 жыл бұрын
The brand that I bought had enough space to screw 2 bits on the shaft. I believe it was Milwaukee.
@mrpetericeman8 жыл бұрын
Good video great sound great information.
@79jasetheace7 жыл бұрын
Thanks for the tutorial
@bob10tn4 жыл бұрын
Can I do the same thing with my M90 2018 ?
@SchofieldRacing9 жыл бұрын
No fuel injection lights, bike runs WAY better, sounds Awesome, and no I don't have to worry about rust because I live in Oklahoma. I did this a year ago and still don't regret my decision. :)
@blaitwilliam8 жыл бұрын
Thanks. I want to do my 2005 C50. I was looking for a video that showed a good procedure. Thanks again..
@ThatBikerDude8 жыл бұрын
doesn't the motor need those baffles for some blowback resistance to the motor? will doing this harm the engine and/or the engine life? I would like to do this to my 1999 honda nighthawk 750.
@SchofieldRacing8 жыл бұрын
Well, it's kind of like putting Flowmaster exhaust on a car which will then have less back pressure. You won't gain much horsepower in the car unless you also change out the intake. The more air in = the more air out. I haven't changed the intake or anything on my bike. The only thing I've really gained is a deeper tone and MAYBE a little more power. I can say that I still don't regret doing this and still don't have problems with my bike. :)
@GOBEARS19856 жыл бұрын
I recently bought a C50 Boulevard with the baffling already taken out. I can't ride the bike on long rides because when it gets hot it wants to shut itself off. I'm told it's because someone knocked the baffling out and messed up the back pressure. Now I have to get a tuner for it or buy new exhaust.
@SchofieldRacing6 жыл бұрын
Sounds like they took the secondary baffles out as well or maybe a complete different issue causing it to shut off. I still have this bike and have zero problems with it.
@msiddi015 жыл бұрын
Aubrey.... the previous owner shouldn't have tried this hack job. Now you will have to buy a controller.
@notahetpig3 жыл бұрын
Too loud for this guy. I like the stock pipes.
@bigmarkymark96693 жыл бұрын
B4 I get to do this . Same thing on a 2012?
@SchofieldRacing3 жыл бұрын
I believe so, but you should research to verify same exhaust setup
@SchofieldRacing3 жыл бұрын
I believe so but you should probably research to verify same exhaust setup
@bigmarkymark96693 жыл бұрын
@@SchofieldRacing well I decided to have a go at it. Not happy camper right now. In 1 ¹/² pipe has least 5 smaller pipes running along with it which prevents it from wiggling alot. And the hole saw blades I spent 40 bucks on only allowed me to get my sawzall started..lol. I'm going to try to get those inner pipes out this afternoon but holy cow it's a pain. But as far as I can see there's no deep inner baffles...ill let ur fans know on this if it works and how bike runs afterwards cause idk what will happen lol
@Robnord19 жыл бұрын
I like the stacked hole saw idea. Sounds good after the job ! Thanks for the video.
@thomassamaha283 Жыл бұрын
I'll be doing this very soon
@Thegrunt2412 Жыл бұрын
How did you combine the bits??
@anclesomety88995 жыл бұрын
Do you lose the back pressure needed for the motor.
@SchofieldRacing5 жыл бұрын
Negative, there are additional baffles further up the pipe, I would not recommend taking those out too though. My bike still runs great!
@anclesomety88995 жыл бұрын
@@SchofieldRacing Thanks for the tips.
@Marco-qe5zw Жыл бұрын
Back pressure is a myth
@tadrhyne13347 жыл бұрын
How did you combine the saw bits?
@SchofieldRacing7 жыл бұрын
RONALD Rhyne, the bit that the blade screws onto had just enough space to add 2 holesaw blades.
@ZteveW3 жыл бұрын
Aren't bikes engineered for a certain amount of back pressure from the exhaust? What problems can i anticipate?
@joeoquinn31253 жыл бұрын
thats what makes me think this is a silly thing to do. it is engineered that way for a reason.
@VinEllis7 ай бұрын
No more than aftermarket pipes that have open exhaust ie 99% of them.
@coyote1020767 жыл бұрын
perfect sound! :-D
@rmahi17 Жыл бұрын
Kool budget mod tank u!
@vampdemon46304 жыл бұрын
idk where to buy those drill bits and idk what you exactly call them 😂
@SchofieldRacing4 жыл бұрын
Lowes or Home Depot Hole Saw bits
@hobbypilots7945 жыл бұрын
Nice Where did you bought the saddle bag
@SchofieldRacing5 жыл бұрын
I wish I knew... they were on it when i bought the bike. I tried to find a name inside but couldn't find anything.
@hobbypilots7945 жыл бұрын
@@SchofieldRacing thanks Danny. Is it possible to share pics back and side, so I can do my search Thanks
@SchofieldRacing5 жыл бұрын
@@hobbypilots794 Yes, I will send some pics when I get home
@hobbypilots7945 жыл бұрын
@@SchofieldRacing Thanks
@xc_4x43 жыл бұрын
I've read that some sensors start to go off, is that true for you?
@SchofieldRacing3 жыл бұрын
Negative. I still have this bike and haven't had any issues at all. I made this video 5+ years ago...
@peter455sd2 жыл бұрын
Pretty quiet still
@RadLazic6 жыл бұрын
I liked your video. Where did you get those saddle bags, tank lining and other accessories? Thanks!
@SchofieldRacing6 жыл бұрын
RadLazic, they were on the bike when I purchased it. Sorry, not much help...
@RadLazic6 жыл бұрын
Danny Schofield Thanks for replying! Your bike looks great with them (sounds good, too ;) I own the same bike. Peace!
@jachobyjn75318 жыл бұрын
And now, good morning vibrations.....:)
@2001himax9 жыл бұрын
What about inspection ? Will it pass ?
@themetricrider97654 жыл бұрын
This will probably vary state to state but in Pa they like to whine so prob not here.
@zenwarrior20038 жыл бұрын
Not as easy on the C90 The top one comes out just like on the video, but the bottom on is set up differently and is quite a bit harder! In fact, a lot harder!
@coyote1020767 жыл бұрын
good to know! thanks! :-D
@pakattak4206 жыл бұрын
How much harder? I have a c90. Thought about this? Was sound close to this?
@SNAKE_PLISSKEN19795 жыл бұрын
Illegal in germany :-)
@josephheslin93387 жыл бұрын
After doing this modification, is there popping and stuff on deceleration?