How to Delete Rooms from a Revit Project

[@assemabdelwahab7606]

thanks a lot , a lot of love from egypt

[@TheStudentArchitect]

Thanks for watching!

[@kseniyanestserava4949]

Super! Thanks!

[@İlhan_Karakuş]

Thank you, you are wonderful

[@TheStudentArchitect]

Thanks so much for watching, glad it was helpful!

[@jonathantsado5053]

Nice touch, thanks for the insight 👍🏽😘

[@TheStudentArchitect]

You’re welcome!

[@Sanabeln]

Thank you very helpful!

[@TheStudentArchitect]

You're welcome!

[@dinahany233]

Thank u for help me to delete the room

[@TheStudentArchitect]

Of course, glad it helped!

[@zaidobambino]

thank you!!

[@TheStudentArchitect]

You're welcome!

[@mv4720]

Great tip!!! Thanks

[@TheStudentArchitect]

Thanks for watching, glad you found it helpful!

[@sureshcivil8627]

respect for Ukraine ..From India

[@cordeauxboi]

Thank you!

[@TheStudentArchitect]

You're welcome!

[@cordeauxboi]

@@TheStudentArchitect You're the best!

[@lauma-sj3ql]

Thank you

[@TheStudentArchitect]

You’re welcome!

[@helgefitje]

Thank you. 🙂

[@TheStudentArchitect]

You’re welcome!

[@arefhamedani5158]

I LOVE YOU!

[@TheStudentArchitect]

Thanks for watching, friend :)

[@LuisEduardo-sh2nu]

I love it and love u

[@TheStudentArchitect]

Thanks for watching!

[@Noneyaviz13]

my problem is the room lines that were made are still there, so when i try to place another room it automatically goes to the previous outline made. how do i delete the invisible separation lines. note: going to vv/vg and turning it on or off did not work, they still remain invisible.

[@giuseppepapaleo349]

The line is still there but you can't see so it's about visibility. In your view properties open EDIT on VISIBILITY, scroll too LINE, open all your LINE clicking on (+), scroll to SEPARATION LINE and pin on it. Now you can see all the separation lines on your view and modify them.

[@TheStudentArchitect]

I hope the comment below helped you but if you're still having trouble, try going to different views - different plans, 3D views, etc. - to see if they become visible. Toggle reveal hidden elements (RH) to see if they become visible, and use cross selections to see if you can select them that way and use filtering to only select the separation lines. You can further refine by cross selecting in smaller areas where you know the separation line isn't placed to avoid deleting ones you want to keep. Hope this helps!

[@zeinali6912]

Revit still remember the room, i will change the bounderies of the room. how can I do it. thanks alot

[@yesivinatyas4024]

Punya saya ketika ke room schedule, malah tidak muncul sama sekali hanya kolom nama, area saja

[@TheStudentArchitect]

Hai, periksa pentahapan jadwal ruangan dan pastikan sama dengan pengaturan ruangan. Anda juga dapat memeriksa pengaturan filter jadwal untuk melihat apakah ada yang disembunyikan. Semoga membantu. Silakan periksa kembali dan berikan pembaruan tentang apakah dan/atau bagaimana masalah Anda telah teratasi. Hey there, check the phasing for the room schedule and make sure it's the same that the room is set to. You can also check the filter settings for the schedule to see if things are hidden. I hope this helps. Please check back and give an update on if and/or how your problem was resolved.

[@britniecowling2100]

But the room boundary is still there. How do I delete that?

[@ventdesigns5463]

I am having the same issue, i want to delete the room separation completely, it leaves the boundaries but they cant be highlighted or deleted, did you find a solution?

[@TheStudentArchitect]

Try making room boundaries visible in the view (see Visibility Graphics -> Lines -> Room Separation), select, and delete. If you’re having trouble selecting them, try doing a cross selection and filter the Room Separation lines. Hope this helps!