Not a sponsored video, but the link to where I bought the kit is below to give you an idea of the cost and scope of the project. www.stage3moto...
Пікірлер: 99
@marshamartin50864 жыл бұрын
I'm not a mechanic but I thought the instructions and explanations were very easy to follow; especially like the step-by-step visuals and your voice came through loud and clear. In other words - Great tutorial video.
@davidklimmek31923 жыл бұрын
They were excellent. Micah is good dude . We all love these T6 Rangers! Take care of it. Go to Ranger5G com
@James_GT4 жыл бұрын
Good recording, clear instructions, this is how you make an install video.
@christian5424 жыл бұрын
I have a 2019 super crew and I bought an axle back delete from AFE power. I installed it today, with some help from this video, and it sounds great. Was real easy to do thanks to you
@tokin420nchokin2 жыл бұрын
That truck has never seen mud in its life has it? I'm jealous. I live on a dirt road so I'm washing mine at least 2x a week. Nice video
@MicahMartinDIY2 жыл бұрын
Thanks Tokin! I mostly drive on city roads, so no I don't have to wash it that often.
@Motor-City_Ben-Diesel2 жыл бұрын
Very very well done video with explaining everything simply and in detail. Love the sound of the muffler delete you got. I believe I’m going to get it for my ranger now as well. Thanks a lot for the very helpful video!
@MicahMartinDIY2 жыл бұрын
Thank you Ben! You're going to love the results! Even better than the revs and the acceleration sounds is the blaht, blaht, blaht when you decelerate. I still love hearing it months later!
@davidklimmek31923 жыл бұрын
Nice job, nice tutorial, quality workmanship & install tips also! These new *Rangers are AWESOME* ! Ford truck engineering really brought back the Ranger properly. Powertrain is so far ahead of *rest of class* . Our frames are even stronger & suspension works better. As a mechanical engineer ..26yrs in "automotive manufacturing" be sure u run *SN+ /GF-6* "full synthetic" 5w30 (change 4k-5k mis /max / as u seem run truck hard & rev alot. 2.3L can take it w/its forged internals but old adage in racing is : *oils cheap..engines expensive!* . *Run 91-93 premium fuel* too if u can gets all the HP & keeps our Ecoboost runnin smooth😊.
@MicahMartinDIY3 жыл бұрын
Thanks for the tips David!
@davidklimmek31923 жыл бұрын
@@MicahMartinDIY no prob! enjoy that awesome truck. Love mine even more 19mos after bought it. So much potential . #Ford #Ecoboost
@davidklimmek31923 жыл бұрын
@@MicahMartinDIY U go on Ranger5G.com site? Lots great info.
@anthonyvillanueva9492 жыл бұрын
fđwill this be okay with Desiel Engine? if yes, how and m I can get one of thsse
@davidbradley61652 жыл бұрын
@@anthonyvillanueva949 AMAZON
@car_detailing03272 жыл бұрын
I’m guessing if you have running bored you won’t be able to do this?
@MicahMartinDIY2 жыл бұрын
Yeah, I could see that being a problem. Even if it fits, the exhaust would be hitting your running board.
@davedave77802 жыл бұрын
Hey bud, that big one, is the resonator, small one is the muffler. If you chop them both open, the big one is hallow, small one is packed with glass. I thought the same as you until I had a ford dealer pull up the prints
@MicahMartinDIY2 жыл бұрын
Good to know, thanks Dave!
@stage3motorsports3 жыл бұрын
Great video Micah!
@MicahMartinDIY3 жыл бұрын
Glad you think so!
@jeremywrzesinski7 ай бұрын
Great installation video! I’m in the process of installing mine on my 2023 XLT crew cab. I am however having trouble getting the delete pipe to go over the factory down pipe. Almost like it’s not quite large enough. Thoughts?
@MicahMartinDIY7 ай бұрын
Ouch, I did not have that problem. Is it close? You may just have to place a 2x4 or something on the other and and try hammering it on.
@johnhickman1068 ай бұрын
Instead of Lucas, spit works on the rubber shock mounts for the exhaust hangars. You can use WD40, Liquid Wrench, dish soap, as well and they won’t damage the hangar. WD40’s damaging chemicals evaporate relatively fast. Do not soak the isolators as they will swell.
@MicahMartinDIY8 ай бұрын
Thank for the tips!
@randycreason33993 жыл бұрын
Great video. Definitely not the sound im looking for. But I knew it was gonna be a challenge to find the right muffler setup for the ranger. 4 banger problems.
@MicahMartinDIY3 жыл бұрын
I love the sound! I can't wait to upgrade to a cold air intake and hear it then though!
@partnerplayer3 жыл бұрын
MBRP makes a nice sounding dual exhaust.
@CactusJack2523 жыл бұрын
Borla makes a great sounding pipe for this truck
@davidbradley61652 жыл бұрын
I AGREE RANDY, ALL THE AFTER MARKET EXHAUST KITS SOUND LIKE SHIT, THE KIDS CALL THEM FART CANS FOR GOOD REASON.
@frandanco62892 жыл бұрын
@@CactusJack252 Borla is much louder...
@ctvxl3 ай бұрын
My 2021 Tremor has Roush exhaust tip and muffler. It sounds very nice. Not too loud at all, but deeper and very slightly louder than stock. I bought it recently cpo from a Ford dealer. They never even mentioned the exhaust upgrade. I doubt they even noticed it. lol
@MicahMartinDIY3 ай бұрын
Awesome! How do you like the Tremor edition? Plenty of power?
@ctvxl3 ай бұрын
@@MicahMartinDIY I like it a lot. Yes, plenty of power for my needs.
@frankherron5194 жыл бұрын
Just wondering if you have had any problems with your muffler delete you put on your Ranger yet? I've got a 2019 Ranger supercab I ordered one for hoping it'll fit with no problems. I've got running boards to hope that not going to be an issue. Thanks for the video.
@MicahMartinDIY4 жыл бұрын
I've run it for 3 months now with no problems!
@Hawksteers3 жыл бұрын
@@MicahMartinDIY update video on how trucks been running and pros/cons?
@gilbertomendoza16772 жыл бұрын
Was the running boards an issue?
@HappyDaClown1872 жыл бұрын
What size sockets did you need to do this I bought the mrt single sidekick for my 2022 so I'll be doing this hopefully this upcoming Wednesday.
@MicahMartinDIY2 жыл бұрын
To the best of my memory, it was 13mm for most of the bolts.
@dad35623 жыл бұрын
Any error codes by doing this or spark plugs showing anything rich or lean?
@MicahMartinDIY3 жыл бұрын
No sir! I've had the kit installed for over a year and 30,000 miles now. No problems whatsoever!
@dad35623 жыл бұрын
@@MicahMartinDIY if you ever do a downpipe, buy heat shield for it! I mean holy crap I had an AFE downpipe on for only two weeks and took it off, it only got to the temp of what the OEM downpipe did but dang man. I took it off and put the oem on. If I ever go back to a downpipe I’ll definitely wrap it in thw heat shield stuff next time. I did have to do the o2 sensor non fouler hack but I felt guilty running that lol.
@kennyboy16043 жыл бұрын
Love the install video nice neat and to the point
@MicahMartinDIY3 жыл бұрын
Thanks Kenny!
@camerongreen85625 ай бұрын
What did you use to hold the pipe up after you took off everything?
@MicahMartinDIY5 ай бұрын
The new kit came with adaptors that connected to the factory brackets.
@Darylrb19833 жыл бұрын
Ordered mine. Worst case if its too much all have a vibrant resonator welded on the "mid pipe"
@MicahMartinDIY3 жыл бұрын
You're going to love it Daryl!
@Darylrb19833 жыл бұрын
@@MicahMartinDIY this is dependent on whether there's a lot of dronenon the inside on the highway. Thoughts?
@robertcampbell83163 жыл бұрын
Where did you get t he exhaust kit from??
@MicahMartinDIY3 жыл бұрын
Stage3Motorsports.com
@sproutandmerc19412 жыл бұрын
Great Video I just ordered the same thing today.
@MicahMartinDIY2 жыл бұрын
Thanks! You're going to love how your truck sounds and the increase in power is very noticeable too!
@eseowl44973 жыл бұрын
Will it work on the 2019 ranger?
@MicahMartinDIY3 жыл бұрын
Yes, it absolutely will!
@Sasasala3863 жыл бұрын
great sound! does it have a stage mod?
@MicahMartinDIY3 жыл бұрын
Thank you! No stage mod yet!
@ajtrevino53 жыл бұрын
Does this delete the resonator as well?
@MicahMartinDIY3 жыл бұрын
Yes, absolutely! Both the muffler and resonator.
@edwardcampbell3420 Жыл бұрын
May not work out with side if you have running boards
@MicahMartinDIY Жыл бұрын
Good point. I'm not sure if it will or not.
@adambarnard84032 жыл бұрын
So the mid pipe is 3 inch?
@MicahMartinDIY2 жыл бұрын
I believe it is 2 1/2, but I'd have to go back and double check.
@adambarnard84032 жыл бұрын
@@MicahMartinDIY oh you said in the video the new pipe was 3 inch that connected to the stock mid pipe
@myplaxismodelisbetterthanyours3 жыл бұрын
PB blaster baby!
@chuckcarter74312 жыл бұрын
Did you notice a drone in cabin or loss of torque
@MicahMartinDIY2 жыл бұрын
Slightly louder in the cabin +10db, but definitely an increase in torque for sure!
@mannyman7292 жыл бұрын
Would this be ilegal
@MicahMartinDIY2 жыл бұрын
Depends where you are. I passed inspection in NC in 2021, and then this year they failed me. Same shop. So I just put the factory setup back on just long enough to pass and ripped it back off again. Totally worth it!
@TheDavidTurk3 жыл бұрын
Love the video!
@MicahMartinDIY3 жыл бұрын
So glad!
@garyring8306 Жыл бұрын
use silicone spray in the future, dont use oil period it will rot the rubber.
@MicahMartinDIY Жыл бұрын
Thanks Gary!
@anthonyvillanueva9492 жыл бұрын
Will this work and fit to ford ranger wildtrak 2016 model, Desiel engine
@MicahMartinDIY2 жыл бұрын
As long as the exhaust size is the same diameter it should work!
@martinjackson49906 ай бұрын
Hi did this fit yours cheers
@5.02valve82 жыл бұрын
Good video well explained for the 5 year olds man 👍🏼
@MicahMartinDIY2 жыл бұрын
Glad it helped!
@Darylrb19833 жыл бұрын
Hows it holding up so far?
@MicahMartinDIY3 жыл бұрын
Couldn't be better. Go watch the update video in my Ranger playlist!
@Darylrb19833 жыл бұрын
@@MicahMartinDIY hows the drone at highway speeds?
@1431darkblood4 жыл бұрын
3inch on the end, 2.5inch before the muffler
@Hawksteers3 жыл бұрын
Update?
@MicahMartinDIY3 жыл бұрын
I haven't forgot! I am going to make one as soon as we get a nice day! It's been raining like crazy here!
@Hawksteers3 жыл бұрын
@@MicahMartinDIY cool sorry for the comment spam lol. I’m coming up on 2 months with my ranger and just ordered the full version of this kit. I’m gonna try to upload a video when I get it
@darylrabara-brokate54293 жыл бұрын
Hows the drone
@Hawksteers3 жыл бұрын
@@darylrabara-brokate5429 not bad at all, the ten speed makes up for it for the most part so if you want to be quiet you just let the truck up shift to a higher gear
@N3wbMa5t3r10 ай бұрын
I want to do this to my 2020 Explorer.
@MicahMartinDIY10 ай бұрын
You should be able to find kits for it. I ran mine for about 2 years, but then switched to a glasspack kit to be a bit quieter.
@madmotorhead94253 жыл бұрын
sounds like a honda
@MicahMartinDIY3 жыл бұрын
Haha!
@jordang82213 жыл бұрын
Ricer ranger?😂
@MicahMartinDIY3 жыл бұрын
Good one! It actually does not sound like a import at all. Sounds good!
@Xcarson1223 жыл бұрын
Sounds deeper in person ngl
@doggyd963 жыл бұрын
Will this still pass inspection?
@MicahMartinDIY3 жыл бұрын
Yes! It passed in NC with no comments or questions.