Today, we'll take apart a knife that's very interestingly made, with a shockingly good action, the Spyderco Para3 Lightweight. Here's Eric Glesser's Breakdown Video: • Spyderco Para 3 Lightw...
Пікірлер: 95
@pasquale785 жыл бұрын
I really think that this one of the best edc knives. It has the lightness of a delica with the lock and bladestock of a para3.
@chadwaters2615 жыл бұрын
At the end of all things, the two things that will bring Nick the most satisfaction: the improvement of Spyderco and the popularity of the name "pocket pecker."
@BCJerbs Жыл бұрын
I thought the other video on the pm3 was on the lightweight and learnt this is the one I should be watching as I'll be putting back together my first spyderco similar and I'm just stoked that I'm going to be in the big kids club finally! As my friend says "Every knife collector needs a Spyderco" and we'll I'm just so so grateful towards this wonderful community for sure! Nothing better in my humble opinion! Watching from the Cowichan Valley on Vancouver Island in Canada thanks for sharing! Cheers, Kimmers and Jerbs #22ADAY I'll never quit quitting 👍🏻🇺🇸🔥🔪🔥🇨🇦👍🏻
@aria89285 жыл бұрын
a lightweight with actual screws... finally.
@Shanes_sharp_sheet5 жыл бұрын
Best production knives company on the planet. Period
@jacknemo80215 жыл бұрын
Phosphor Bronze washers can be had in such thin widths I would probably add one anyway.
@JustAKnifeGuy Жыл бұрын
Do you know the exact size ? Having centering issues that is driving me nuts.
@whatfreedom7Ай бұрын
@@JustAKnifeGuyyeah I bought a rec exclusive and it’s way off center to the point it’s almost rubbing on one side. That’s just unacceptable. A little I don’t care but that’s excessive.
@JustAKnifeGuyАй бұрын
@whatfreedom7 I hear you man, I sold the one I had. Every lightweight Para 3 I've ever held is not centered. I have 3 g10 Para 3s and they all are perfect.
@whatfreedom7Ай бұрын
@@JustAKnifeGuy rec told me it was normal for those so I guess they weren’t lying since you had the same issue. Sounds like a good candidate for a scale swap then.
@TheGamerGuy1981Ай бұрын
Still have mine, still love it. I have come to prefer the 20CV banter however.
@abdullmajed24944 жыл бұрын
hi i like you’re video keep going.. i have problem with my para 3 lightweight that i cant centering it’s go to left to much and when i loosen its dont make a different please gave me a good answer
@EVONLMessi105 жыл бұрын
Great Vid Nick. I appreciate your efforts. I hope you recuperate soon. 🙏🏻👊🏻🤙🏻✌🏻😀
@patrickdougan40665 жыл бұрын
Thanks Nick.
@ocomegashadowstacking58865 жыл бұрын
Wow really amazing looking knife!!!
@glennmuir56172 жыл бұрын
Yeah, amazingly cheap looking. It's a knife blade plus 32 cents worth of FRN and some miscellaneous metal bits with a street price of about $120 (MSRP $165) for the plain-Jane model. 🤭🙄😐
@keithbeckett13494 жыл бұрын
anyway of adjusting the centering on this ? i tried loosening everything and couldn't really seem to make it shift
@cshank23244 жыл бұрын
Yea I can't get mine centered either
@HarryBunnGRVOTV4 жыл бұрын
Mine arrives tomorrow along with a Ganzo!
@dooshlerd5 жыл бұрын
I think the design of this knife functions a little better with grease instead of oil. I use EWG (extreme weapons grease) on mine and it functions great.
@moobcars64905 жыл бұрын
EXTREME
@jacknemo80215 жыл бұрын
Did I miss the explanation as to what happened to the iFixit type bit drivers and why the Ferrari cost class ones are still in use?
@NickShabazz5 жыл бұрын
Because this is an old video. They'll still be around in the backlog.
@NickShabazz5 жыл бұрын
Also, for what it’s worth, the fancy drivers have been sold. :)
@AndreaZoeh4 жыл бұрын
Thank you for the video!! Do you know which screws are those? I need to replace mine and I was wondering if they are standard and I can buy them somewhere?
@skylerbond562 жыл бұрын
Email Spyderco for some
@MB-lr5fp2 ай бұрын
Great knife but the stud for the pocket clip screw rotates on mine when I try to disassemble. Can't get it apart...driving me nuts
@issacblue89945 жыл бұрын
Nick any chance you are going to review the endela?
@larrymarsico40595 жыл бұрын
WoW can't believe theres like no liner on the right side 🤯 I still love my G10 Para3 tho!✊💪🏻🇺🇸
@xxcaseyxxc4 жыл бұрын
Are there any aftermarket grips being made for this yet? I see a ton that say for the para3, but never mention the LW.
@skylerbond562 жыл бұрын
They can't
@Thesusoperator2 жыл бұрын
@@skylerbond56 lel there are scales for it, kzbin.info/www/bejne/aYvLdnqaoMZmhsk
@flowb0t2 жыл бұрын
No, but you can put the LW’s blade into the handle of the regular para 3
@HAWKTUAHH4 жыл бұрын
Love the video! Watched both.
@computerwarez5 жыл бұрын
Hope You Feel Better nick thanks good disassembly video oh how much better do you find the blue loctite stick vs the liquid
@mikeg3950 Жыл бұрын
For me, nothing beats the delica for edc use. The blade stock thinness is lost on this para 3. I have a chaparral but still prefer the delica
@andrewkeeton36274 жыл бұрын
I’ve got up and down blade play when the knife is closed. That can’t be normal can it
@fuzzycuffs3 жыл бұрын
Any idea where to get replacement hardware, particularly the pocket clip screw/holder? I stripped mine horribly :(
@Surago2 жыл бұрын
You ever figure it out? I did the same thing. Also, how'd you get it out if you stripped it?
@fuzzycuffs2 жыл бұрын
@@Surago I did. Call up Spyderco and they'll send you replacement everything. Costs a little but it turned out fine. There's also options on AliExpress for whole new hardware sets.
@Ice_Berg5 жыл бұрын
I kinda think you should steal the thumbnail idea from the Spyderco breakdown videos. I like how they use a picture from the middle of the disassembly with all the parts and tools laid out; it looks really nice and gets the point across well. It would also help to set apart the thumbnail from your review videos now that they both use the same background.
@moobcars64905 жыл бұрын
There's still the screwdriver
@redluck87403 жыл бұрын
My clips screw spins freely, what do I have to do with it?
@maciasd3038374 жыл бұрын
Anyone know if your able to swap out the scales for any custom variations that are out there?
@skylerbond562 жыл бұрын
No
@clintonlewis16635 жыл бұрын
Just seen the video, keep it up love your videos 😀
@monkeybrains911 Жыл бұрын
Why did he only lock tight one side of the screws? The other side he dosent use any locktight?
@johnwest44923 жыл бұрын
Hi Uncle Nick, where did you purchase your alcohol 🍸 I'd very much likecto pick up a bottle for myself with the top pump like yours. Thank you
@tomservo34013 жыл бұрын
What are those tools?
@davidpeeler5027 Жыл бұрын
What tools do you use in this video? thanks
@danielpatricio19562 жыл бұрын
Nice tools👍 where can I buy those? Thanks in advance
@sngx13045 жыл бұрын
Hmmm, action on my Para 3 was pretty poor and the centering was... acceptable
@virg82094 жыл бұрын
Lightweight?
@flowb0t2 жыл бұрын
What are those drivers and where can I get a set?
@sexymexicanmaid3 жыл бұрын
How do you remove the screws with blue locktite?? I wanted to take My para 3 apart so that I could try to add a bronze bushing from a Tenacious but I can't because of the stupid locktite
@kitnoki22 жыл бұрын
Some heat from a hairdryer might help
@MrTJohnston3 жыл бұрын
I wonder if you can put other scales on these? For example get rid of FRN for TI or carbon fiber aftermarket?
@IchNixHabenUsername2 жыл бұрын
Just buy the regular para 3 with after market scales :)
@paulmonje60164 жыл бұрын
i have a para 3 lightweight, i want to buy the g10 scales, i worry if the landyard hole with work with those g10 scales!
@spiderdavis32963 жыл бұрын
What happened to Nano oil? Is the oil you used on this knife better? I agree with you about blade thickness.a bit of overkill imho.Thanks for posting.
@Pmike4043 жыл бұрын
You can really use just about any oil, Benchmade Blue lube, Daiwa reel oil, and Bali slime are all great to use. Nano oil works well but is really expensive compared to the other three I listed.
@chrisfr34802 жыл бұрын
Bonjour je m’appelle Chris je suis français fan de couteau donc celui que tu présentes j’aimerais savoir s’il te plaît quelles sont les deux produits que tu utilises le bleu et le rouge merci par avance et vive spyderco
@ConeyIsland19524 жыл бұрын
hi great videos what type of oil lube should I use with my Para 3 lightweight?
@ReapersEDC Жыл бұрын
I use nano oil 10w on all my spidercos and rat2
@Punkrocklibertarians4 жыл бұрын
What are the screw sizes?!
@jdemeter43575 жыл бұрын
Was he blinking help me because something doesn't sound right 😎
@chrisfr34802 жыл бұрын
Bonjour je m’appelle Chris j’aimerais savoir s’il te plaît quelles sont les produits que tu utilises dans cette merveilleuse vidéo le produit de couleur bleu et le produit de couleur rouge merci par avance et vive spyderco
@thomash45785 жыл бұрын
As The Nick goes So goes Spiderco
@MrStompingshadow2 жыл бұрын
I cant unloosen the bit because the other bit opposite of it also spins smh so frustrating
@Joshuamorris2562 жыл бұрын
I got the same thing going on.
@sitmonchaiweerachon9802 Жыл бұрын
same here
@MrStompingshadow Жыл бұрын
@@sitmonchaiweerachon9802 I had to get an extra bit in order to hold the other side. Either way I won't be buying anymore lightweights unless they're going to be heavy users lol
@dcbrot2 жыл бұрын
Came here to see if I lost the second washer
@alpine1600s5 жыл бұрын
Okay, Para 3 msrp $200+. Para 3 lightweight msrp $140. Why are you paying so much money? For a plastic knife? Thank God for Cold Steel.
@frank1982norm5 жыл бұрын
it’s $91 at most retailers.
@pitiedvod5 жыл бұрын
I agree. That is why I always carry the Cold Steel XL Espada in my pocket. and at nearly 16 oz, I can even use it as a make shift hammer. Bonus, it take ages to cut through a whole pig with a super light weight knife with a just under 3 inch blade, so it clearly only a loser would pick it against a true beast of a knife. Go Cold Steel!
@tomservo34013 жыл бұрын
You don’t cut with the handle but With the blade. You are paying mostly for the steel. I’ve read stories of peoples Spyderco knives Accidentally going through the washer and dryer and coming out fine. Just ordered my first one so we will see.
@tomservo34013 жыл бұрын
I own 2 CS knives. A Limited edition espada w/coyote tan handle scales and a Lynn Thompson signature Voyager with green handle. they Are both made of high end stainless steel and would make excellent self defense weapons But honestly just a little large to make good edc knives and 2. Even before CS sold out and went out fo business they were worth a lot of money. Now I see on eBay they are selling for $300-$700 apiece so no way I am going to carry them now. Just ordered my first Spyderco. Something Edc that I will actually use and abuse like my Tops Longhorn bowie or esse 3.
@orange0105 жыл бұрын
I don't like plastic knives
@jairoblanco8275 жыл бұрын
First!!
@cwsmith175 жыл бұрын
Can't believe how cheaply made this is
@thomash45785 жыл бұрын
Looks like a $15.00 knife
@sngx13045 жыл бұрын
That is why the BM Bugout is a better knife, head to head
@JedidiahLincoln4 жыл бұрын
@@sngx1304 I have both. The Para 3 is the better knife imo. I've broken down 1/2 inch thick crate cardboard with both and the Para 3 lw felt more stout and handled the task better.
@tomservo34013 жыл бұрын
You should read the reviews? I’m. Ore concerned how long my pocket knife will hold and edge and corrosion resistant. I’ve read stories of peoples Spyderco knives going through the washer and dryer and coming out fine.
@HarryUnchained2 жыл бұрын
it's minimally engineered rather than throwing everything on the knife. i like it, it's a KISS principle.
@dipgas51554 жыл бұрын
I love spyderco but...yuck..! I can’t put my trust in that system
@thegeneral1235 жыл бұрын
Why do Americans in particular say "I'll see if I can't" when what they mean is "I will see if I can." I don't get it. You're saying the opposite to what you mean.
@NickShabazz5 жыл бұрын
Did you just expect English to make a lick of damned sense?
@gubourn3 жыл бұрын
Nit pick of the year
@georgemorley10293 жыл бұрын
Think logically. He’s going to both see if he can’t AND if he can. Understand? Can I? Yes. Can’t I? No. Or alternatively, can I? No. Can’t I? Yes. That is always going to be the case.
@steventaylor24843 жыл бұрын
I look at this and I think WTF makes this worth 100 bucks good grief.
@OldGrowthRedwood3 жыл бұрын
No reason to disassemble.
@user-zh2ws2qh5f8 ай бұрын
No metal liners - no knife.
@TheGamerGuy1981Ай бұрын
It's a lightweight EDC,not a Gerber strongarm for camping ffs.