How to disassemble and reassemble the Logitech Gamepad F310

[@chewiebacca5841]

Thank you for your clear and thorough directions. I'm so glad I watched this before I opened my controller.

[@Dan-lc7xi]

Thank you very much, friend, helped out. I cleaned the gamepad from dust and assembled it, everything is clear. The only step that caused me difficulties was laying that black wire, which is very rigid and inflexible. And a very small joint, the Xinput/DirectInput lever stopped switching, apparently I twisted some of the cogs:)

[@Jesus_PK]

I wish more videos were like this. Extremely clear, easy to follow and straight to the point, thanks!

[@gr18.n1k]

2:30 Probably this is the part you were struggling the most with. Thank you for the video, very helpful!

[@jordancreatesva]

Thanks bro, now I can escape the depths of the North Atlantic :)

[@inter_707]

Cannot overstate how helpful this video is. Nothing but props, thank you so much.

[@cloakedthargoid]

This is the best disassembly and reassembly video I have watched. Straight-to-the-point and super-informative.👍 In my case, the problem with the right trigger was that the base of the spring shifted slightly and was not well supported by the tiny pole it goes around. This was causing phantom inputs to be registered from time to time. After realigning everything, the problem appears to have gone away.

[@hoppasenterprises3647]

My Logitech F310 stopped working recently, and thanks to this video I was able to revive it. Much appreciated!

[@chatinerenard4268]

Within 3 days of buying this controller my left analog stick would get stuck and it felt a little gritty. Followed this video, took it apart, put it back together, and the left stick works again! Not really sure what the problem was to begin with but thank you for the tutorial!

[@bullyakker]

Mine is over 10 years old and I'm only replacing it as I found the newer gen of controllers are much better (more precise) at FPS shooter games. I've poured 99% isopropyl alcohol into the joysticks maybe twice (while unlpugged) , shook it around and let it dry overnight twice in 10 years! It's friggin bulletproof!

[@khan6690]

Thanks a bunch. I tried to do it myself, and ended up fixing the problem. Thing is, when I went to close, my right joystick would get stuck if I put the screws back in. After watching ur vid, I realized the wire was pushing the right side too hard and I had to fix it. again, thanks a bunch. I love you

[@alxdukextars2620]

cuando lo desarmas confiado y luego no sabes que hiciste mal! este video vale oro!!! thanks

[@susamogus11111]

you saved my controller's life! it was just a driver error but before i knew it, i opened the controller. you were very helpful!

[@TheMDBandit]

You are a life saver! Now my daughter and I can play some streets of rage games on her computer 🤘😁🙏👍

[@Zombiekratoast]

Thank you 🙏. I was worried. Didn’t have a backup for my submarine.

[@kutayyldrm9977]

can u help me for 2:40 i cant do it Even though the cable is in place, it doesn't fit properly.

[@LostSagaWarrior]

Thank you! This video helped me disassemble my controller to fix an analog stick getting stuck, and then reassemble it easily.

[@KaiSiege]

Thank God for this video. My little bro accidentally kicked my controller and the joystick would drift downwards. When I opened it up, there weren't any issues. Guess it was the cover that tilted the joystick downwards.

[@HypepowerProductions]

Its perfect man, this deserves way more views !

[@CarloBarlongo]

Can't find any conductive rubber pads as a replacement for this

[@ashrafahmedovi475]

Bro you saved my life.. Thanks for the video. Keep making these kind of useful video.

[@Jesus_PK]

Here I am, a year after my last comment because I had to revisit this video when disassembling my other F310 hahaha Wanted to share a nice tip for the people who took aside the PCB board: If you look below it, you can see two white lines that visually represent where the cable should go below the PCB. It's super handy when you're putting back together that piece, by far the most annoying one to reassemble. Hopefully that helps anyone in the future (and future me!). Thanks again for the video.

[@darkalchemist90]

that damn thing got 3 hours of my fu### life xD

[@Jesus_PK]

@@darkalchemist90 I can imagine, it's a huge pain to put back in.

[@mzdshii9121]

great video .. you deserve much better so thank you wish you all the best

[@ecologicaltime]

Thank you so much!

[@Nicolaiii]

can you add a vibration since it has placeholder for it?

[@baxildragon]

This was exactly what I needed, especially the warning about the cord and the posts. Great information. Thank you!

[@rudy_4ier]

2:30 to 3:08 is completely impossible for my F310. the fucking circuit board just refuses to sit correctly no matter how i adjust the wire underneath. i kept trying and trying until one of the rubber pieces tore, and i gave up completely and snapped the circuit board. moving on to a PlayStation/Xbox controller now.

[@renangoncalvesflores]

I'm about to do the same.

[@Gianpi612]

same i can't fucking do it

[@darkalchemist90]

Hating logitech controller for that, took me 4 hrs , awful design.

[@afnaananwar293]

Thanks man! Great video! Helped me fix my right trigger(RB) which had broken off.

[@alexanderloi5194]

Thanks i was trying to clean or fix my right trigger button too, it works fine now, it seems the spring was slightly off

[@bigfoottamer]

thanks for the guide, i took it apart without knowing that the buttons fall out

[@mcrmaza]

The side panels do complicate the re assembling. Thanks for the help.

[@rodrigotp27]

thank you i fixed my analog stick it was stuck ,I just put singer oil now is working well

[@WSS_the_OG]

Really nice job on this video. Very clear instructions!

[@speedymcspeedfr]

You, sir, are a saint.

[@shinobusensui9395]

Where can I get a replacement button switch for the right bumper? The plastic piece of my switch split in half after the controller fell

[@novalinnhe]

Extremely informative video - thank you!

[@zerk5470]

I coul never find the silicone conductive rubber pad for logitech f310 Please can you tell me where i can buy them?

Are you sure that you've assembled it right? Because at 06:33 I can see a little gap between the front and back part, at the point where they should connect, and this gap is not present on my one.

[@swetkataria5282]

So there's no vibration motors, right!??

[@molambo]

I've had the older brother of this F510 for years and it's filthy, but it works perfectly! I have to clean it, but it has smears on the paint on the front and there's this damn rubbery paint that logitech puts on their products that turns to gooey goo! I gotta get this shit out!

[@GeraldMountaindew]

Even if I push the wire out of the way, the circuitboard doesn't go back on right. It sort of see-saws from side to side now and the controller doesn't close properly. Also the left joystick now gets stuck when I push it to one side and it doens't snap back on its own.

[@midnightsynthwave2308]

same. Did you figure out how to get the wire to sit properly in the end?

[@midnightsynthwave2308]

i finally got it to work, you have to tuck the wire from the strain releif around a smaller post thats to the right of it. That lets it sit more flat.

[@Avidelux]

@@midnightsynthwave2308 mate, you are a genius! I've spent over 2h trying to make it fit, thanks a lot!

[@edesmile]

@@midnightsynthwave2308 Opened my controller a few weeks back but was unable to reassemble it due to this problem, I almost gave up. But thanks to you, I was able to put it back on!

[@FootyInsider1]

​@@midnightsynthwave2308please explain it to me

[@josianedossantosanunciacao533]

I need to replace my analog stick, however I don't know what model to use. Would it work with a xbox analog stick or ps4? Please, help!

[@ecologicaltime]

i doubt it.

[@kanuh]

my left stick gets stuck, sadly the potenciometer is logitech exclusive, the only way to test it is using a xbox 360 one but its not sure if that ever works.

[@ivkolya89]

I'd like to know it too, such analog sticks are in many gamepads, but I didn't find correct name, mostly I saw such sticks with a metal stick as PS2 analog sticks

[@maldivirdragonwitch]

Thank you, man! Great tutorial, truly!

[@hasansolak23]

Hope I won't screw it up, wish me luck... Thank you a lot for the video!!!

[@hasansolak23]

Okay guys, I am back. It was totally easier than I expected; however, it didn't solve my problem. It is hard to control left analog, it doesn't stay steady (it constantly goes to right instead of going straight) which becomes a big problem when I play games like rocket league and euro truck sim 2... Right analog is good as new tho, left analog must have became softer since I use it more than the right one. Wish I could solve this...

[@ozimantv]

Hello I want to buy d pad rubbers but unlike dualshock I couldn't find dedicated piece.Do you know if those pieces are sold or is dualshock dpad rubber is competible ?

[@vator_rs]

Hi, did you end up finding rubber for dpad? I am trying to find a replacement part for it, but I can't find anything. I might get dualshock dpad pads and hope I can glue the pad to the controller's motherboard.

[@ozimantv]

@@vator_rs nope sorry

[@MrSmeeds]

Extremely clear - super helpful. Cheers!

[@sergiovicente3792]

I LOVE U, YOU SAVE MY LIFE!!!

[@YunusKaynak]

Thank you brother i was wondering where the 4x black clyinder parta dropped from 😂😂😂

[@darkdusty1937]

hwy man can iask if what is the sze of thier spring?

[@alpyigitsaglam6970]

this video is really nice. i need this video but i found now thank you so much .

[@Havenos]

On my controller, left analog sticks click option doesn't work when I push it up. Any advice? Thanks.

[@jaysap2762]

is there any place that sells mods for this controller

[@hiendrak]

another tips: loosen up, the screw near error botton, for my case is R1

[@kursatgoker918]

I also have the same console but USB connection part is cut. From where I can find the USB connection diagram? And also which type USB socket I should use?

[@trillyfan2578]

they don't sell the silicone replacement

[@ErikUden]

Sadly I forgot my screwdriver at the surface of the ocean this tutorial sucks

[@darkalchemist90]

Anyone knows how to fix L3 ? sometimes it doesnt work at all and some times it press al the time.

[@Wollmütze-l5w]

Interesting. I am about to order this and so I watched this. This game controller does not have mechanical switches but it is basically an membrane controller. All buttons are membrane based. I wished it had mechanical switches. But then these cost now 17$ new. So what I expect...

[@TheArcSet]

Thanks for this video.

[@ravimaulana9307]

Thanks dude!

[@mysticjuicer01]

Great video, thank you!

[@HydroSheep]

hey, is it possible to reduce the stiffness of the triggers? theyre too stiff for me compared to an xbox controller where the triggers are much more soft

[@froggerfrank]

exchange the springs, try those from a ballpoint pen for example.

[@phoelinx2750]

I was so scared to take it apart.. but now my left trigger is working... oh, yeah... I hate Dark souls...

[@jb6409]

sark douls

[@andreaadamo8830]

i hate dark souls 2 bro

[@RICKY.FEBRIANSYAH]

How to replace switch LT

[@thegaiatheory5584]

thank you, i cleaned my up arrow sensor and those nipples too, now its like brand new.

[@thorael]

i ordered my third today

[@bikerbleeds7279]

I cant do the "fit the cable" part

[@ecologicaltime]

kzbin.info/www/bejne/eXPIfIJ9apdkmtU

[@NoNsToPxs]

yeah the "fit the cable" part is annoying would be nice to find more info about it

[@marwanhossam4499]

thaaaank you that was really usefull

[@joppedechamps9391]

Does anybody have any knowledge about the circuit board of the controller? I was wondering what the + and - connection holes are on the bottom left and bottom right next to the joysticks, as they dont seem to be used in this controller

[@Slayer1o7]

The controller looks to be a complete knock off version of logetich’s ps2 wireless controller I suspect those are where the rumble would be

[@Carascoroscovaldo]

Isn't there a sale of the controller's conductive rubber on the internet? I thought it was totally absurd for an old controller like this. I was thinking about buying the F310, but I ended up giving up because of this. Imagine having to buy a new controller just because the conductive rubber on yours is bad and you can't replace it with a new one...

[@aryankumarroll2689]

I'm still having issues with wire

[@brenocastro2431]

My right trigger is getting super sensitive so it stays on continuously, can't see the steps to find those pieces

[@brenocastro2431]

The springs were out of plumb😁

[@Pupixario]

Interesting video but the only reason to disassemble mine would be to spit right on to the thumbstick sensor, because it's total garbage right out of the box. :D

[@chingchenghanji9732]

I don't know why my controller isn't turning on, I've got two of these One has a shady cable which disconnects everytime I move The other just doesn't turn on but everything's in pristine condition

[@geralt6530]

best video

[@penatio]

Had to disassemble it only like a month after I bought it (the analog stick was getting stuck). Tbh, I'm disappointed with this controller. The deadzone on the sticks is insane. The dpad is pretty nice though.

[@kv2258]

hi did u manage to fix this problem? i have the exact same problem as u

[@penatio]

@@kv2258 I cleaned the sticks (those metal poles and that part below) and moved the stick around and it's better now. It may also get stuck on that round part between the sticks (I think it's from a cable). If that's the case then you may try to file the bottom of the analog stick's plastic cap a bit.

[@penatio]

@@Leon-bp6kb Yeah, it moves a bit to the sides. I tend to play games mostly on my keyboard and mouse nowadays anyways (actually ordered a new board today, membranical with anti ghosting by Roccat), and only use a gamepad when playing something that uses analog movement (like Sonic Adventure). Also, If you want a pretty good dpad I'd recommend getting either the Hori Pokken DX controller or Hori Fighting commander (not the Octa version though, as I've heard that they are defective). Some people also recommend the Wii Classic controller but good luck finding that in a good condition (you'd need an adapter too).

[@Mrkupid22]

Glad my F310 work for almost 10 year, today I search the video because error connection to it USB port, I want to try this method..

[@StephenSquarepants]

solve my Drifting and L3/R3 problems, thank you

[@Sjsjsjsjsjks1]

My controller suddenly stopped working what happened.

[@mrrco1106]

Thank u so much!!!

[@rymond621]

My d-pad kind of unsteady, I want to glue so it cant move. But im afraid it will broke.

[@ecologicaltime]

i would not glue that

[@SolSeal]

Is it me or there’s unused buttons on the PCB?

[@olcatgaming859]

well, i was here because i wanted to replace the springs in my controller because it was a bit too hard to press, im tryna put some pen springs to make them a bit softer

[@osricen]

How's the durability of this controller? I want a controller I can beat because I play fighting games all the time and sticks and triggers are the first to die... and I'm tired of it.

[@brayannkouam9097]

real i need a good xbox controller

[@Kenjidarou]

Unfortunately the cord part doesn't work, and the board wobbles no matter what. Also the shoulder triggers won't go into place, so my controller's fucked :(

[@padalarangeuy9160]

u save my $30, terimakasih

[@poceluev1337]

Храни тебя бог чел

[@OverWorld9]

thanks,appreciate it :)

[@MiralayEge]

thank you mannnn

[@FightCain]

Me before watching this video: "I'm gonna disassemble this so I can replace the joysticks" _everything fall out of place, pieces scattered, 30min of searching the green A button_

[@nighlektolmn5390]

mvp

[@taitaitai4270]

Thanks fam

[@MohammadBaidas]

Many thanks

[@togellers]

2:30 - 3:12 begitu membuat kepala pusing....sangat sulit untuk dilakukan

[@Amaz9087]

Thank you for bro

[@kudulion6354]

I JUST CAME HERE TO SEE IF THE JOSTICK HAS A vibrareto :-) anyway thax

[@purplehandle]

Hi there! Very late reply, but this gamepad CAN have rumble motors put in them. I am not the person to ask how to do, but it is entirely possible due to the presence of certain regions on the circuit board.

[@_4ybak_489]

I still put the wire on the correct spot...

[@fightingforce8498]

This is very difficult.

[@slide2989]

Si me sirve te digo lol

[@alexisdelahoya2022]

Pudiste poner el cable?

[@sem74733]

3:14 after inserting the screw my left trigger sits perfectly but the right trigger doesn't. What could be the problem? ps: drive.google.com/file/d/1Hmmr7jvbPkeQ70l9kU5FI-jPfCXPWrhS/view?usp=sharing looks like this