How to repair a collapsed button on the Logitech F310 Gamepad controller

[@CrackDavidson1]

Man, this is definitely a design flaw. Had it opened and didn't noticed it. The bumper was maybe 1mm off. Thank you so much. Great that you found the fault. 😊

[@baldwinivofjerusalem47]

It's a planned design flaw, planned depreciation so they can sell the same stuff over and over again.

[@olegg7538]

Sir, you've saved my gamepad, thanks a lot from Russia!

[@billybegood466]

Big thanks. I already took the controller apart, but I couldn't figure out the why of the problem. Everything seemed like it should be working, but turns out I had the same problem you showed here. Saved me from having to buy another controller.

[@friwette]

You make my day ! One more gamepad solve , and one less in the garbage ! Thanks!

[@songoku7176]

Amazing video, you just saved me paying for another one! Thanks a lot from Turkey!

[@eyebrowsaurus]

merhaba :D

[@playstationsimracing1108]

I had two of them in the same condition and thanks to your video they are like new again!

[@mohammadafiqtamren6302]

You're a life saviour from Malaysia dude

[@IceTrayy-u3s]

Thanks a ton. You're a life saver. I hope your pillow is always cold! So you can sleep like a baby

[@aldev6381]

EVERY F310 USER SHOULD SEE THIS

[@jordanhenderson7067]

Thank you! I didn't even think try and push the actual electronic button back in like that. Works like it's brand new again

[@wellingtontrojan5752]

Thanks Dude, almost 2 years, but you save me today!

[@CemSarcaoglu]

you are a life saver!

[@TheStruggler0]

aga benim A tuşu gitti ya

[@CemSarcaoglu]

@@TheStruggler0 logitechler hiç sağlam değil usta bi daha almıcam

[@TheStruggler0]

@@CemSarcaoglu valla aga öyleymiş. 4 sene önce aldım ucuzdu şimdi bi xbox alayım dedim 700 lira olmuş amk gözüm doldu bi bakınca dedim biz nereye gelmişiz aga..

[@CemSarcaoglu]

@@TheStruggler0 ets2 hastasıyım bi logitech direksiyon alamıyoz el oğlunun cep harçlığı kadar fiyatı var burda bi maaş ediyor

[@asdasdasdsadasd696]

@@CemSarcaoglu ben bu gamepadi dün aldım sağ analog aşağı çekip bırakınca takılı kalıyor. servise göndersem hallederler mi

[@midzizen]

not all heroes wear capes. thanks a lot man!

[@Cryos737]

Worked for my ancient f510 thanks. this pad will probably outlive me haha

[@FlameHazeist]

Thanks a lot! I have many F310 controllers and the shoulder buttons always get sticky/collapse after some time. Edit: I found out no need for crazy glue. Just bend the bottom tabs so they're square to hold it in place and adjust the button's position as needed to get it to click after reassembling. You can use quite some force to adjust it. I had to lower it a little after bending the tabs because it was too high after.

[@pranav_pradeep]

Sir, You are a live saver Thank you so much

[@jopa_ryds]

thanks mate. i bought two of these and both of them failed with the RB button at the same time! This fixed it!

[@noweebatall5520]

Dude you're a lifesaver

[@allenyhu3988]

YOU SIR ARE A LIFE SAVER

[@ВладимирЗубарев-ю7ю]

Thanks a lot! I thought my controller was dead but your video saved it

[@makabebe9515]

If not for the weak shoulder buttons and overly extended triggers, the controller could've been da shit.

[@NotUlpoadingAnything]

Amazing that such a small change can make such a big difference.

[@TrebleChild]

Very helpful video this helped a lot. I also noticed there is a dipswitch inside the controller that can be flipped if dropped and renders the whole thing unusable.

[@efetuzcu9691]

Not the hero we deserved, but the hero we needed.

[@akmalsyaifudin9712]

Thank you so much, you're a life saviour!

[@abdelrhmanelgendy6895]

Thank you so very much brother i just fixed mine after watching your video, Godbless

[@ozguryldrm3921]

Thank u soooo much! Saved my controller.

[@anupdhond]

holy shmoly ! you managed to resurrect my RB button, thanks a ton sir ! respect from india.

[@SanPurasun]

Thanks a lot bro, your videos saved me, i almost sell it for a cheap price ,but i can fix it myself👍😁

[@BoraY5734]

this is most helpful controller fix guide

[@AnggoroArif]

Hi, any idea where can I get rubber dome replacement for the dpad?

[@praeliator]

Hey man, you know where I can get a replacement shoulder button? I need to resolder it as the button is completely damaged.

[@mzdshii9121]

can I ask your opinion about the quality of this gamepad or maybe a review video or you compare it with other gamepads like gamesir you have a great way of explaining things so I would like to hire your opinion thank you .. wish you all the best

[@ecologicaltime]

thanks, i can do a comparison as i have the Xbox and Sony controllers as well.

[@mzdshii9121]

@@ecologicaltime that will be very helpful .. I play a lot of racing games like F1 and I lost a lot of gamepads because of the joystick I will be looking forward to that .. thank you so much fun fact: you have the voice of Toto Wolff the CEO of Mercedes F1 team :)

[@eddybrash1793]

You saved my life man, thank you!

[@meowmeoe803]

Thank you so much man. You've saved me. Subscribed immediately

[@lowberistfs]

after i do that my button R1 its stuck. where i can get that sparepart anyway ? thank you

[@AtomFA]

do you have a video on fixing the d-pad buttons walls giving out

[@Chronaxy]

thnx mate i fixed my button like this u are saver!

[@chowmuggins]

Thanks, I got mine working again!

[@kapilsingh5234]

I am facing the same issue but my gamepad is in under warranty So will service center consider this issue in under warranty please suggest

[@zohiapower2740]

Thank You so much! Saved My joystick

[@Patorino]

Best tutorial ever!!!!!!!!!!

[@solarenergynow08]

Saved one out of two, thanks!...the dead one is totally collapsed, would not even bounce back when I opened controller..

[@emperorhex8503]

i pushed the bumper, made sure it wont fall back down, and it still wont even spring, am i doing something wrong in this step or is it my controller

[@anlgnc]

thanks bro TURKEY

[@anquimarls]

This joystick work in Batocera or TV box multijogos or ant Linux??

[@PurpleHusky1994]

I appreciated this video, you are a god send!!!

[@SethOmegaful]

Thanks. I thought that maybe it was the microswitch and I even tried to push the plastic inside the metal case, but I didnt applyed enough force afraid of damaging it. After seeing your video, I gave another try and it worked. Then I did the same thing with the metal constraint as an attempt to avoid a reocurrence of the problem. Problem solved.

[@berkkaplan3400]

bro thank you very much its worked

[@Vengefulknight]

Thank you friend.

[@alagar7732]

Thank you for video. Very useful, espeshially the glue tips. Still i managed to screw this up. Is there a way to replace that little box with button?

[@xXxcrazy1eyesxXx]

Thank you so much i fixed mine 👍👍

[@mehmetzekikaya5875]

nice video you save me going tothe repair shop

[@Nivel7]

Thank you very much! I was about to cry by thinking that i lost my 300 bucks controller lol

[@fady.g5739]

Does it have a vibrator?

[@aldusric]

Thank you!! and blessings.

[@Fatherofignorance]

u are the $100 saviour

[@SirMarex]

Worked for me, thanks a lot!

[@MecCollect]

Bro is a legend.

[@user-dy2op9fi9k]

thanks! exactly was the problem with my control.

[@viking3162]

what about the arrows ..how can i fix it ..if u can make a video about it i will be grateful about that

[@adhityaprayogi1462]

Thanks you help me a lot 🔥

[@mehmetaligungormus3554]

I LOVE U SO MUCH U ARE A SAVIOUR FOR ME

[@Abid_Al_Mahmud]

Hello, I have a problem, I bought the Logitech f310 few day ago, but I'm feeling that the A button is slightly softer than B,X and Y. I mean it doesn't feel the same as I press other 3 buttons, the A button feels like it's a little soft, it works tho, but I don't feel comfortable cause X,Y,B feels all right and hard as it should be but A is kinda soft and I Don't feel comfortable playing with it, could it be the rubber? Or any other problem? Please reply :) A button works without any problem, it's just the button doesn't feel as hard as X,Y,B and it's kinda annoying and uncomfortable for me

[@МишкоКоган]

Perfecto!!! Big Thanks!

[@heriimawati4419]

Can you make some video for change sparepart button triger R1 ? After i do this the glue is stuck with R1 triger. I cant figure it out

[@josianedossantosanunciacao533]

hello...I have to replac my analog stick...However I don't know what model I can use. Would it work with a xbox or ps4 analog stick?

[@kursatgoker918]

I also have the same console but USB connection part is cut. From where I can find the USB connection diagram? And also which type USB socket I should use?

[@brujoraz]

Thank you. It works perfectly

[@goldchris1111]

thanks man, its hard to play anything without the proper feedback and button press feel

[@aquamarkwin8651]

thank you, good sir

[@nesimatbab]

Thanks this helped me!

[@badtuber1654]

one of the 2 little plastic things that holds my top right bumper broke, how can I fix ? the bumper still works but the click is not as good

[@selo23398]

thanks a lot man, it worked!!

[@kornpoppolnikorn6211]

you are the best!

[@nguyenquanglinh1021]

Thank you

[@ArmoredCrow]

can i replace the button the super glue messed it up please help

[@MrFrdro]

Thanks bro🔥🔥

[@THEROOK2007]

Thank you Sir !

[@Yiild]

I have superglued the button itself by my mistake. It poured much than I expected. Now button cant be pressed and its stucked. Is there any option to solve this situation?

[@sinancanbitiren4327]

THANK YOU MAN!

[@mjdevlog]

DUDE THANK YOU SO MUCHH!!

[@daak5163]

uhh mine is kinda different. the buttons work but the plastic on the outside doesn't make the buttons click. how do I fix that

[@brsemreozturk]

thank you so much ♥

[@HobiBertukang]

Thank you! Had this same exact problem, and this fixed it.

[@Alumno512]

It´s work, thank you a lot.

[@metincetinkaya9160]

Hello, the glue is too much and the key is stuck, what can I do?

[@idolizerkb]

My "A" button has been having an issue. If I press it lightly/very gently, it won't respond. If I press it harder, then it would respond. Is there any solution for that?

[@Евгений-д7и9й]

Спасибо,исправил неисправность благодаря вашему видео)

[@pooanddoo]

Thank you.

[@limpets]

Thank you, i finally fixed my controller that was about to be thrown out. I have a question, my button wasnt falling as much back as yours, so i just squeezed the metal housing and skipped the glue step. With time that's going to loosen again, right? should i look into replacing it soon?

[@ecologicaltime]

yes will loosen over time. It does depend on how you bent it though.

[@aldmeren]

It worked thanks man

[@diegolara01]

Thanks a lot..

[@JKFIII]

any way to make my trigger less stiff

[@hola979]

My inside part is fine. The black part isn't getting pushed out or anything and the button on the inside is working fine but the button on the outside dosent make contact with the one on the inside and I have to press really hard to make it work. It's basically unresponsive. How do I fix this

[@sweatfox.1822]

Sir I I accidentally put the glue too much and it froze the button what do I do?

[@mehmetcanerkomur6552]

thanks a lot sir

[@Ankitt879]

thanks a lot

[@maskimt828]

Thanks a lot :)

[@Spiky_216]

Thanks A LOT