How to disassemble Brother HL-1110 laser printer

Disassembling and assembling Brother HL-1110 laser printer, how to remove fuser unit, laser scanner, PCB board.
For any question or suggestion leave a comment
-----------------------------------------------------------------------
email: [e-mail]
other links:
www.emmegiricambi.it/
www.brother-usa.com/printer/#....
-------------------------------------------------------------------------

[@Falaxuper]

Thank you so much dude, a pile of around 20 sheets of paper got jammed deep inside the fuser. I succesfully disassembled the printer and removed the paper, but I was later left with the metal contact you're showing around 11:03, and didn't know what to do with it. You literally saved my money I would spend on repair! Thanks again!

[@gedeydias3406]

Thank you so much. It's the best tutorial video I have ever watched. You made the most instructional video as possible.

[@chemicalexposure8537]

Thank you. Not too experienced with hardware, had some jammed paper. Helpful video!

[@thiagomarchione]

Thank you my friend. You saved my life.

[@mouraoneto8516]

thank you, for having helped us not to break a printer, your videos are very toppppppp, you deserve a cake....

[@raulcastillo7087]

You saved my life too. thank you!

[@BikalpaKattel]

Thank you so much. Fixed my printer.. paper was stuck inside.

[@netmdk]

Very useful! Thank you!

[@Ginkgo.Generative]

ขอบคุณ ในการแนะนำ ครับ

[@fdmenendez]

Same here, thank you very much

[@MadaraUchiha-ei4gy]

Спасибо.Вы просто спасли.

[@christiaanveltkamp]

A good tip for this type of printer is when you want to use a toner longer (than brother says you can), just click the button in front of the printer 7 times in a row. It will continue and you can use your toner for much longer!

[@luisangellc1837]

Gracias, me sirvio de mucho

[@matiasguerrero2235]

no entiendo a los que dan "Dislike" , el unico y mejor video sobre desarmar esta maquina, Solo pongan los Subtitulos del ingles a español y todo perfecto. Thank You, The Best.

[@viandant5]

I've added the spanish CC subtiitles

[@jeancarlomayaruiz1981]

Esque no la desarmo del otro lado en los engranajes blancos

[@lzdls]

Thank you!

[@ardrian1237]

mantap, sangat membantu saya, terima kasih.

[@matiska89]

como me salvaste con tu guia chabon

[@ramukumar8584]

Thanks sir for helping

[@wangbin7520]

Thanks for the information, but I disassembled the gear side in order to get the paper that I inserted and can’t put it back together. Can you demonstrate the disassembly and installation of this model with the gear side?

[@viandant5]

Sorry I have no more that machine in office. If I get another machine I will make a video

[@helcio4265]

Thank . Obrigado! Helcio Brazil Curitiba 08/09/2021

[@mpoerot8013]

got a Fuji P115w main motor failure which seemed to have exact design with this. Where is the main motor though? is it the lower left at 8:00?

[@viandant5]

Yes it's the same printer. Yes it's the main motor but the error messaes are often very vague

[@TheEdder11]

Hi I have dismantled my printer on the left side shown in 2:15. I dont know how to put the springs and specs back. Could you do a video or take a picture of it ? thank you

[@viandant5]

Sorry I haven't a Brother 1110 in office

[@vishalpitroda1415]

Fuser assembly hai aap ke pass

[@joelvargas7536]

I just changed the drum, but the print is clear on the left side. Help me

[@viandant5]

Try to reseat the toner cartridge. May be it's not in the right position and the toner roller is not in contact with the drum. check the corona wire cleaner, is it in the right position?

[@robersound6586]

Se quebró la pestaña que acciona el sensor de cubierta abierta; ¿Cual es la posición cuando la cubierta está abierta, obturando o no la luz del LED? en la sobre vista no se alcanza a ver el detalle. Gracias.The tab that triggers the open cover sensor was broken; What is the position when the cover is open, shutting or not the LED light? in the over view you can not see the detail. Thank you

[@viandant5]

When the cover is open the sensor is up

[@robersound6586]

@@viandant5 thanks, but to make it clearer, if the sensor is "UP" it means that it is free or sealed

[@viandant5]

@@robersound6586 free

[@robersound6586]

@@viandant5 Thank you Viandant5

[@fernosan]

Mine is making a high-pitched grinding noise, so I need to press on the sides to print. Maybe a cog is skipping. Wish me luck. Solution if anyone has the same problem: I found that the minor gear connected to the big one (2:15 on the right in the video) had slipped out and a little cracked. Pushed it back and reinforced it with super glue and baking soda (just the part that does not have teeth). Also regreased all gears with a little bit of silicone grease. Now it's golden. Page count: 11.728

[@viandant5]

If the problem is only the noise I think it could disappear after a while

[@darlinclash518]

Perdón por no saber ingles. No gira feed roll y me indica "falta de papel" Podrás ayudarme con eso por favor? Muchas gracias .. Carlos desde Argentina.

[@viandant5]

Are you sure you have selected the right paper cassette and the right paper size in the printer folder?

[@GK_Competitive_Exams]

Can you suggest me about an error in HL 1110 or HL 1201

[@GK_Competitive_Exams]

I am getting error '' door is open '' but the door is properly clossd, I opened the door and tried to check the door sensor[left side], by checking and trying the problem is not solving. Is there any other sensor in the printer? which can cause this error ? what can be the reason ? Is this a damaged sensor problem or something else ?

[@viandant5]

@@GK_Competitive_Exams If the pin of the printer door (the one who enters in the slot of the printer) is not broken or shortened, probably the sensor is defective

[@GK_Competitive_Exams]

@@viandant5 Hey, yes. May be the sensor is defective. I'll show it to service centre now. Thank you 👍

[@JHRoss2]

Is this applicable to HL-1112 too?

[@viandant5]

Yes it's similar

[@kimberly9802]

Hi I have dismantled my printer on the left side shown in 2:15. I dont know how to put the springs and specs back. Could you do a video or take a picture of it ? Please please please

[@viandant5]

are you sure there are no broken parts? it's not so difficult

[@TheEdder11]

Hi Yee Huei, do you manage fix your printer? Caused I also so the same thing...

[@arturomdz225]

No desarmo la parte contraria dónde están los engrananes. No me sirvio

[@ezetuber6360]

Hello! Could you tell me what I could do, the two lights are on, and the machine cannot be turned off

[@viandant5]

Detach the electrical cable and try to turn it on again. Check if there is jammed paper inside the printer

[@ezetuber6360]

@@viandant5 I have unplugged it but when turning on it produces the same error, do not disassemble it but there does not seem to be paper work

[@viandant5]

@@ezetuber6360 Without checking the printer it's difficult to say, may be a paper sensor. Check if in the printer folder or properties there are more informations about the error

[@ugozsoluciones3823]

Can you make a video but for the gear side? :( plss

[@viandant5]

Yes I can do it

[@mattia7562]

Hi, good job. The main board of my printer is dead, cause 812013-c11 A51279 1338nc006 was shorted. I removed it and now short is gone away, but where can I buy it? or where can I buy the full main board? thank you

[@viandant5]

it's difficult to solder the component, and it's a dedicated compnent difficult to find I think it's better to buy all the board

[@mattia7562]

viandant5 thanks for the reply, but for me is not a problem solder this component. The only problem is that I found it on a Chinese site, but I don’t know if it’s preprogrammed and will work once mounted. Do you think it will works anyway?

[@viandant5]

I do not know which component is, I know that Brother and other manufacturers use dedicated components, I had problem using compatible components

[@marcosmartins1416]

Minha brother hl-1212w só liga/desliga sem o cilindro, com o cilindro não desliga nem imprime. Mesmo com cilindro sem o toner fica com erro. My brother hl-1212w only turns on / off without the cylinder, with the cylinder it does not turn off or print. Even with a drum without toner, it is wrong.

[@viandant5]

Probably there is a shurt somewhere in the drum unit. Check if there are foreign objects in the corona wire assembly, or other foreign objects inside the printer near the contacts

[@marcosmartins1416]

@@viandant5 I bought a new cylinder and the error continues.

[@viandant5]

@@marcosmartins1416 Check the contacts between the printer and the drum unit. Check if the transfer roller is in the right position

[@michelecuna7098]

Grazie per il tutorial. La mi stampante da un errore che secondo manuale mi riporta a guasto del motore principale. Secondo te cosa può essere o come potrei escludere se é il PCB o il motore effettivamente?

[@viandant5]

Nella HL-1110 purtroppo i messaggi di errore sono molto generali. Comunque non dovrebbe essere toner, drum, gruppo fusore

[@mplites7160]

Where is the waste toner box?

[@viandant5]

There is no waste toner box

[@alopli]

I have 3 pieces left and printer says “unable to print” . Can you help me .?

[@viandant5]

sorry I don't have that machine in office and I don't remember.

[@alopli]

@@viandant5 Thank you anyway

[@amirahlotfi8952]

Hi can u show the gear side of hl1210w how to reassemble it again, I opened it but I dont know how to assemble it again then my father come home and mad at me please help me ASAP help mee 😭

[@viandant5]

Sorry I no more have this machine in office

[@w00tzs]

hi @viandant5, when you install the fuser at kzbin.info/www/bejne/hYTKkKCkr8mhq7M, is the fuser gear supposed to touch the white gears on the right side of the printer? mine does not touch them and the paper jams exactly when it is supposed to be picked by the fuser, so I am suspecting it is due to the gears. What do you think? Thanks.

[@viandant5]

If I remember weel it must contact the gear. Check if the gear has some broken tooth. When the printer is turned on check if the fuser rollers are turning.

[@w00tzs]

​@@viandant5 Thanks for the reply, I managed to fix it - the problem is I opened the fuser to check the heat lamp and after I put it back, I did not fully push the drum in its place, so the gear wheel was not making contact. Now is fixed. Thanks for this video as well, it helped me a lot.

[@edoardosimoncini1515]

Ciao, ho la tua stessa stampante. Ho un problema. Quando provo a fare funzionare la stampante non riesce a prelevare il foglio bianco dal carrello e va in errore. Ho smontato e rimontato la parte con tutti gli ingranaggi. Ti mando una foto. Potresti aiutarmi?

[@edoardosimoncini1515]

È il lato che tu non hai smontato nel video

[@viandant5]

@@edoardosimoncini1515 Gli ingranaggi hanno poco a che fare con il trascinamento carta. E' più probabile che il gommino presa carta sia consumato, magari basta anche solo pulirlo con alcool.

[@edoardosimoncini1515]

@@viandant5 provo a farlo, eventualmente potrei mandarti un video che spiega bene qual è il problema?

[@viandant5]

@@edoardosimoncini1515 va bene

[@ilikecringe]

Of course the thing I need to fix they don't show:(. Now I have a useless printer because I don't know where the gears go.

[@viandant5]

Sorry for that but a problem to the gears is really unusual and difficult to solve

[@onuracar3779]

printer has no power where should i look

[@viandant5]

The power supply is the first thing you have to look at

[@hayvanlaralemi6303]

Hello halp me

[@watchmania46]

testtt

[@sammen8744]

Pignon