How To Disassemble & Reassemble The CZ 75 Decocker Frames

[@anth5424]

I appreciate you making this video, it was vital help to reassemble an 1998 BD Sear Cage assembly after a repair, great detail and explanation!

[@GrigglesTheTexan]

I want to say that your video was infinitely better than all the others ones ive seen. You actually showed the orientation of the parts and i could actually see what you were doing. Thank you

[@jettferox5660]

Your lighting, background and camera angles are perfection. You make everyone else's videos look like hillbillies in a garage. You are my go to videos for my CZ's. Your products are great.

[@apextactical]

We have tried to make them clearer for the end user. There is still a lot of work to do, but thanks.

[@lisapeterson1460]

This video is far better quality than several others I'd found. So glad I found it AFTER I put my decocker CZ75 back together and watched other poorly made videos first.

[@diegoconde2728]

Simple: The best video on the subject and the best camera work . ten stars

[@apextactical]

Appreciate that. Thanks.

[@decodeddiesel]

This video is a LIFE SAVER. Thank you so much Apex! I've been a customer since I bought an enhanced sear for my old Gen 1 M&P in 2010. These videos and all of the other resources you have for your customers are the reason why I keep coming back.

[@apextactical]

Thanks very much. Glad to hear it.

[@VinUnleaded182]

Most instructional video yet. I did not have to take apart the sear assembly though. I only needed to replace the disconnector

[@timsmith6479]

Excellent video and excellent trigger kit. This replaced some Cajun Gun Works parts that I installed . Overall I like this kit better. Two things about the video first installation of the hammer pins, the small hammer pins need to be Staked. My pins worked loose causing the hammer to lock up. Second if you mess up getting the sear pin out while putting the slave pin in and the tiny spring falls out, like what happened to me. Check out "camera test cz decocker sear cage assembly". Another excellent video.

[@SEAKPhotog]

Terrific video for those of us with 75 decockers. Thank you!

[@HuyTran-sk3py]

The best and most detailed video out there. Y'all helped me put my SP-01 back together.

[@ASMR-soothingsounds]

Thank you Apex for this excellent video. This is easily the best video for working on the sear cage of these fine pistols in regards to production quality, clarity of camera angles and precise narration. A+

[@rickpadgett1999]

Great job all clear instructions and technique. Best I have seen.

[@apextactical]

Thanks.

[@GRat9717]

Me watching a non-decocker disassemby vid: "This is pretty complicated." Me watching a decocker disassemby vid: "Fuck."

[@jimflammer9370]

Nicely done

[@MavHunter20XX]

I just finished upgrading my phantom. I would say its easier in some aspects harder in others. Like the Sig P365, you have to remove two pins thats keeping the subframe; one serves as the pivot for the hammer. Then you can draw out the subframe and then push the sear cage pin through to free the sear cage. I wish I made a video of it.

[@OscarDad]

Fantastic video tutorial, best ive seen. ! Thank you 👍

[@apextactical]

Thanks. Glad you like it.

[@OscarDad]

@@apextactical Thank YOU ! Didnt know you had a match grade hammer / Sear for CZ, alway see Apex for S&W stuff .. 👍

[@apextactical]

@@OscarDad We have kits for S&W Revolvers, CZ 75 models, Walther PPQ, FN 509, Sig P320, Gen 3/4 & 5 Glocks and the Springfield Hellcat. While we are the leading designer/manufacturer of upgrades for S&W pistols and revolvers, we offer a whole lot more.

[@OscarDad]

@@apextactical Excellent, thanks for yr reply 👍

[@chestersnapdragonmcphistic579]

A pair of watchmakers tweezers would be very useful for reinstalling those springs.

[@rgraz4929]

Nice video. High quality closeup images. The hardest and most frustrating part for me was getting the bottom magazine brake hook in the right spot. I was placing it in the right spot, but once I inserted the bottom pin, I didn't understand why the mag brake was shifted too high. Then I discovered, once you have your mag brake hook is in position, you must keep it pushed down into the lanyard loop so the bottom pin goes INSIDE the hook and not below the hook. EDIT: On second thought, isn't the bottom pin is supposed to go under the brake hook and not inside it?

[@BakkuIa]

This is the clearest video on the topic, and rightly so - y'all made the action kit. Will there be a video for the CZ-75B thumb safety model? It's what I've got and I don't trust myself to omit steps for the decocker version. Other videos on the topic are of poor quality.

[@apextactical]

see our full CZ playlist kzbin.info/aero/PL49zaerr9Gi8N4vX2Lx4kH418ANOWld5J

[@MavHunter20XX]

I have the phantom polymer frame. Do you have a video on that? There seems to be some significant differences.

[@iZephiroth]

Is it possible to use this action enhancement kit alongside the CGW reach reduction kit?

[@MrWhiterunGuard]

Can anyone tell me if the Apex kit decreases the reset like the CGW kit?

[@AndrewCMC]

Do you have to swap the hammer out for the apex hammer for the kit to function properly? Or can the factory hammer be used?

[@apextactical]

@AndrewCMC our hammer hooks are cut the the correct height and angled to match the sear to produce the results we state on the site. Using the factory hammer may not produce the desired results.

[@omikeyutube]

That's a great video, thanks for taking the time to do it this is going to save me a ton of work and time Where did you get that hammer? I want one just like it, thank you

[@iZephiroth]

I attempted to install it twice today and every time I put the sear cage back onto the frame the double action doesn’t work and the hammer doesn’t cock back. Incredibly frustrating as I have a gun that no longer functions.

[@JimmyLeeJr]

Could you please identify the name of the micro size spring inside the optional ambidextrous right side decocker lever? My new CZ splattered the right decocker lever all over the table even down to that pushpin. Recovered everything but the spring and I can't seem to order the right one...

[@JimmyLeeJr]

This might be a silly ask. They only break it down to the level of the entire right decocking lever in the CZ manual. Probably gotta buy a whole new one or get CZ to do it

[@JimmyLeeJr]

Ok I found the entire right decocker lever is just $5 on cajun gun works. No need to bother with micro springs

[@jettferox5660]

@@JimmyLeeJr Hmm...The SP-01 right decocker lever is $25 pretty much everywhere including Cajun. That's without shipping. Been that for years. You must have got a misprice.

[@RedWolfe90]

PLEASE do a video version for the SP-01 Phantom, its very different than a steel or aluminum frame CZ w/decocker. I pulled some hair out after losing the trigger return spring. Thankfully, my wife found it after I ordered a replacement one.

[@jagpilotohio]

Nice video but I’ve never wanted to give someone a small pair of needle nose pliers so badly . 😂

[@5YND1CA73.gaming]

Is this upgrade only for stock pistols? Will it still function safely and reliably if the pistol has reduced power trigger return, firing pin block, and sear springs?

[@zarinkai2927]

If KZbin ever deletes gun channels . please upload this on a website or forum . thanks

[@apextactical]

We've uploaded several videos to Gun Streamer and Full30.

[@mrjoeyeo8993]

Disassembling a CZ pistol gives me anxiety. Assembling a CZ pistol gives me dark thoughts.

[@AstaoftheBlackBulls]

That tiny hair spring just shot into the ether... my pin came out so easily the spring just vanished.. 🤦

[@Libertarian_Neighbor]

The pins walk out and hit the frame, seizing the hammer if you don’t stake the hammer pins. This is a vital step or you’ll end up with a dead trigger. This isn’t in the directions.

[@jwmeitzler2671]

Exactly! This happened to me also. The disconnector pin is the main problem. The Apex pins are so loose that they almost fall out. I don't understand why Apex does not insist on staking those pins. Why do you think CZ stakes the hell out of them.

[@cargo4741]

For an in-focus closeup of this process: kzbin.info/www/bejne/h56qqZx9o8pme80

[@thewrightstuff6174]

Pretty good video UNTIL you cut away from removing the stock disco and hammer pins, They can be hard to do it would be nice if you included how to do that, But you didn't so Why NOT???

[@Patrick.Weightman]

Somewhat helpful, but too much skipping. Any amount of skipping during an installation video is too much.

[@zarinkai2927]

I refuse to take it to gunsmith. I, as the owner will disassemble & fully master this gun. Why else watch these vids .