How to do a oil change in your Panamera 971 I'll also show you how to do it with a 970 Panamera

Step by step how to do oil change on your Panamera. Its so easy and fun and with a bonus of saving a few hundred bucks.
Disable your air suspension
• How to disable your ai...

[@PanameraTSE]

nicely done.

[@robertjancewicz1689]

video is very well done,only issue is the torque specs.it should be 25 newton meters instead of foot lbs.If you want to do it in ft lbs.in converts to 18.5 ft lbs.5 stars otherwise

[@dharambajway2279]

the porsche dealer near us does it to 25 foot lbs. I noticed that a lot of the dealers do this different. Same with our c63 when i did the oil change. What i do is if i get different numbers from different dealers then i go to a third party private shop like the one I'm in when doing most of these services and see what they say and normally its same as one of the other dealers then i just go with that. Thanks for watching and I'm glad you enjoyed it. If you could like and subscribe it does really help us grow. Thankyou.

[@bertram46]

Very good video so I have a Panamera 4S 2018 what mobile one grade oil should I use? And are there different oil filters out there that are better than others or should I just stick with the factory?

[@milovan8565]

Is it possible to make an access hole in the plastic undertray so that you don't have to remove all of those screws and remove the undertray to get to the oil drain plug?

[@dharambajway2279]

I would not recommend that but if you don't want to do all the removal you can just use a oil suction method and suck all the oil from the top side. I prefer the old school way so I also get to look at all the underside but a lot of dealers are now doing that way as well as its a lot faster. Just make sure you record how much oil you remove so you don't over fill it.

[@lisunny4631]

Hi bro, what's the torque spec on the struct tower?

[@dharambajway2279]

25 newton meters ,18.5 ft lbs

[@lisunny4631]

@@dharambajway2279 after using two wrenches and hand tighten it, I feel like the steering is a lot lighter and handling is not as good as before.

[@dharambajway2279]

@@lisunny4631 for the struct tower just use two wrenches and hand tighten you will be fine this way. I've not had any problems. Maybe put some anti seize on it if your worried you will over tighten it.

[@RentalCarsandYallCousins]

What number is a 2018 4s?

[@dharambajway2279]

2018 is a 971

[@HtownRO]

Oil filter is 25 nm bro….

[@dharambajway2279]

the porsche dealer near us does it to 25 foot lbs. I noticed that a lot of the dealers do this different. Same with our c63 when i did the oil change. What i do is if i get different numbers from different dealers then i go to a third party private shop like the one I'm in when doing most of these services and see what they say and normally its same as one of the other dealers then i just go with that. Thanks for watching and I'm glad you enjoyed it. If you could like and subscribe it does really help us grow. Thankyou.

[@HtownRO]

@@dharambajway2279 Thanks for your video. On the oil filter housing it says 25 nm + 5 nm sometimes so thats roughly 35 ft pounds anyway so its the same thing just a bit tighter. I enjoyed your video 📹

[@dharambajway2279]

@@HtownRO thanks bro. Like and subscribe would be appreciated. What do you currently drive.