I may have watched all of your videos by now. They are good, you are a likable person, not irritating at all, good hands, all well explained, very little I can think of negative. All in all, nice job!
@TheMinuteMasters6 ай бұрын
Thanks man! I really appreciate it!🤙 I’m always open to constructive criticism and feedback because I always want to keep improving my videos.
@rwalker558 Жыл бұрын
Thank you for such an awesome video. No verbal garbage, just straight to the point with good teaching. Once again thank you!
@TheMinuteMasters Жыл бұрын
Thanks Richard!🤙 I appreciate it! I’m glad you enjoyed it.
@supersportimpalass2 жыл бұрын
Dialectic grease does more than just protect the electrical connection. It also seals out moisture when applied to the boots and makes it much easier to remove the wires later as they won’t stick to the plugs like dry wires do over time.
@TheMinuteMasters2 жыл бұрын
Good to know! Thanks for sharing man!🤙
@Acaidia2 жыл бұрын
For anyone looking to do a tune up on their 302 look up "six liter tune up." I did it and I'm very happy with it.
@TheMinuteMasters2 жыл бұрын
Great tune up!🤙
@rromero1091 Жыл бұрын
thank you for the video. best spark plug video for an obs ford truck. well explained. thanks again dude.
@TheMinuteMasters Жыл бұрын
Thanks man! I appreciate it🤙
@rromero1091 Жыл бұрын
@@TheMinuteMasters different types of Motorcraft spark plugs. what's the difference ??
@TheMinuteMasters Жыл бұрын
@@rromero1091 I just buy regular copper OE plugs.
@bengranillo13832 жыл бұрын
I have the 5.8 and I felt stupid as soon as you said the spark plugs don’t come gapped correctly. Just did all 8 a few weeks ago. Better go back through and gap them all. Great video too this is one thing I planned on doing. Just trying to keep her fresh until I can actually afford to start messing with the engine. I’ve learned a lot from your channel. FYI I have the air intake off the straight six thanks to you!! Please keep making videos!!!
@TheMinuteMasters2 жыл бұрын
Hey there’s a first time for everything Ben and I bet you aren’t the only person who has never gapped their plugs. Thanks man!🤙 ignition tuneups are always good no matter what you plan on doing with the engine down the road. That’s great to hear! Well I’ll keep the videos coming!
@gunsandcars36482 жыл бұрын
,44 is what they come in box, thats what manuals say to use, the ones I pulled out were almost .60 gapped
@TheMinuteMasters2 жыл бұрын
@@gunsandcars3648 Wow! That’s why it’s always good to check.
@sandspar Жыл бұрын
Wait a min., 1,2,3,4,5 6,7... no, why no love for the 4.9? I have one and not trying to pretend it's a dragster, but a lightweight truck that has the best injected inline 6 Ford ever made. When the 351 boys turn their noses up I just grin, let go of the fuel nozzle, and get back to dropping it into the last hole at 70 and going to town. Cool vid, you do good work. Best.
@TheMinuteMasters Жыл бұрын
Hahaha! My brother has a carbureted straight 6 in his f100. I’ve had loads of fun with it! Thanks man!🤙
@aarondesantiago35182 жыл бұрын
Your walkthrough are helpful . I just finished changing my front suspension bushings with my dad . Took us all day and plenty of swearing . I had a question if you were gonna do a video on replacing rear leaf springs bushings. After my test drive all that’s left clunking is the rear
@TheMinuteMasters2 жыл бұрын
Thanks Aaron! I’m glad to hear it. Sounds about right! Lol I will eventually do a video on how to replace the rear leaf springs but I probably won’t touch the bushings.
@shanesmith5603 Жыл бұрын
Autolite spark plugs are great ! Especially for fords
@TheMinuteMasters Жыл бұрын
They are my other go too!👌
@terrybaptist7952 жыл бұрын
I remember not long ago when inertia switch failed after I replaced the transmission I had to under the hood to start the truck with a screwdriver. The mechanic told the entire steering column had to be replaced in order to fix the issue.😆
@TheMinuteMasters2 жыл бұрын
What! That’s crazy! Mechanics suggest the craziest fixes.
@supersportimpalass2 жыл бұрын
The truck won’t start if the inertia switch is tripped. It cuts power to the fuel pump only and has nothing to do with the start or ignition circuits.
@obsnation2 жыл бұрын
Make sure to follow the ford tsb 94-4-10 plug wire routing to prevent crossfire :)
@TheMinuteMasters2 жыл бұрын
I’ve never heard of that! What is it?
@obsnation2 жыл бұрын
@@TheMinuteMasters Ford Service Bulletin on wire routing to prevent induction crossfire
@TheMinuteMasters2 жыл бұрын
@@obsnation Interesting. I’ll have to look that up. Thanks man!🤙
@obsnation2 жыл бұрын
@@TheMinuteMasters I can email it to you if you’d like :)
@TheMinuteMasters2 жыл бұрын
@@obsnation Yes please!👇 sxtreacy@gmail.com
@redscortgt932 жыл бұрын
My truck wouldn’t start randomly and it turned out to be the grounding location of my negative battery terminal. (Lol also I hate those days you want to stay dry, you always sweat the most.)
@TheMinuteMasters2 жыл бұрын
That will do it! I know right! Lol
@benjamincamarilloloza90122 жыл бұрын
Helps a lot 👍
@TheMinuteMasters2 жыл бұрын
Great to hear Ben!🤙 Thanks for watching!
@FranciscoLopez-cc7ui2 жыл бұрын
Oh OK thank you buddy thank you for the information be safe
@TheMinuteMasters2 жыл бұрын
No problem Francisco!🤙
@gunsandcars36482 жыл бұрын
I just did spark plugs, come .44, chilton and hood says .40 -.50 , .44 is factory gap?
@TheMinuteMasters2 жыл бұрын
I’m not sure what the factory gap is supposed to be. .44 sounds about right. Obviously I gapped mine to. 54 which is the 6 Litre tuneup method.
@estebangomez8058 ай бұрын
Awesome
@mraider8692 жыл бұрын
Notice you have an oil catch can… Im in the market of buying one right now for my Ford. Im curious to know what make and model the one you are running is… also never thought about mounting it were you did. Looks like a good spot and overall looks good.
@TheMinuteMasters2 жыл бұрын
Yup, it’s a Mishimoto universal two port catch can. I think there’s a link in the description for it. They had a sale online and I got 15% off I think. Extremely well made. I chose that spot because it keeps the hoses short and doesn’t crowd the engine bay much.
@frobles21 Жыл бұрын
Help trouble shoot issue: 1994 Ford F-150 5.0 automatic. Issue: running rich, allot of black smog coming from the exhaust and strong smell of gas. Does not seem to be switching gears, RPM are almost hitting 4,000 running at 55 mph. Parts I’ve changed so far; - EGR Valve - cleaned out the Trottle body - TPS sensor - IAC sensor - O2 sensor - PCV Valve - MAF sensor - distributor - plugs - ignition coil - ICM - air filter - fuel pump front and rear - canister purge valve - vacuum lines - oil change - Temp Sensor - fuel pressure regulator
@TheMinuteMasters Жыл бұрын
I got you on IG. But if you’re only seeing this I would read your codes. Since it’s affecting both your engine management and your transmission it could be your PCM.
@rickyhammer68326 ай бұрын
Hi love your vids just did my water pump after watching your vid, what is .54? Thanx! Ok just checked( .054) lol .54 is a little over half an inch haha ,Cheers!
@TheMinuteMasters6 ай бұрын
Thanks man!🤙 You got it!
@williamgoodman70886 ай бұрын
Can you please tell me the CORRECT firing order for a 1995 ford f150 5.0. Thanks
@TheMinuteMasters5 ай бұрын
This would be very hard to explain in a comment. Since the cylinders are numbered and then I would have to give you numbers in a specific order. I would google firing order of 95 f150 5.0 and click images.
@rromero1091 Жыл бұрын
I did my spark plugs and wires. my truck has a ticking sound now at idle, today I turned it on and it started backfiring. could it be I mess up on the spark plugs ???
@TheMinuteMasters Жыл бұрын
Check to make sure all of your spark plug wires are going to the correct terminals on the distributor. If you mixed one up, it could cause this issue. If that doesn’t fix it, then you’ll have to check each wiring plug one by one.
@shawnburnett22 Жыл бұрын
Wait ,,, disconnect the pos from the battery ,think about it ,if you leave the pos connected every thing still has 12 volts going to it , Maybe disconnect both
@SGCXD Жыл бұрын
@minutemasters I recently read that your spark plug gap on the 351 engine needs to be .45 if your ignition is stock and .55 gap if you have an upgraded ignition. Is that accurate or am I getting fooled?
@TheMinuteMasters Жыл бұрын
I think they did change the gap. However, .54-.55 is the 6 liter tune up gap. So the stock could be .45.
@EdgarHernandez-qz5pj2 жыл бұрын
I just did this to mine not long ago because of the hard start…. Only difference is I went with the Accel distributor and rotor and ignition coil but I’m still having the hard start issue
@bobv82192 жыл бұрын
Do check timing and possibly fuel pressure test.
@bobv82192 жыл бұрын
kzbin.info/www/bejne/fZncn2yer52MoJo Here’s a link to help brother
@TheMinuteMasters2 жыл бұрын
Nice! I wonder what difference Accel makes when compared to Motorcraft or an off the shelf brand. How your fuel and air system looking?
@EdgarHernandez-qz5pj2 жыл бұрын
@joaquinwalker, I do need to check timing but as far as fuel pressure I was reading 33-34psi at idle, all my vacuum lines been replaced too to rule out the fuel pressure regulator
@EdgarHernandez-qz5pj2 жыл бұрын
@theminutemasters I did notice improvement when turning over the engine unlike before all sluggish, good thing I done the tuneup anyways because mine had 3 different brand spark plugs in it and they were all pretty much worn out lol the contacts in the distributor cap had seen better days so I’m glad I had done all this
@eNosArmory5 ай бұрын
You don't gap your plugs with the disc tool by prying on it with the disc... you gap them with the hole in the disc. It will just touch the posts and won't damage your plugs. Learn to use it correctly, it's not a bad tool. Are there better? Yes. But it gets the job done as long as you don't mis-use it as you demonstrated.
@omarsantos4071 Жыл бұрын
Why didn't you go to MSD cap and rotor?
@TheMinuteMasters Жыл бұрын
I didn’t think it was any better than the Motorcraft. My understanding is that the MSD dizzy and ignition box are the real upgrades.
@chrisbroesky2932 Жыл бұрын
I have a new cylindrical old style coil. Can I use it instead?
@TheMinuteMasters Жыл бұрын
I guess so but it’s best to stick with OE required coil.
@fatboyinskinnyjeans Жыл бұрын
I have a 93 5.0 from previous owner with straight pipe in my city. I have emissions how many O2 sensors should I have can not pass emissions?
@fatboyinskinnyjeans Жыл бұрын
Already done, air filter, spark plugs, exhaust manifold, gasket, new cat it is not smoking oil change PCV valve. I am running high HC & CO.
@TheMinuteMasters Жыл бұрын
You should have at least one. I’d have to look at mine to be sure. I bet it’s just one.
@D.Boon12 жыл бұрын
Just glancing at at the plugs on the passenger side it looks like they’re difficult to get to
@TheMinuteMasters2 жыл бұрын
So the passenger side is a bit more cluttered. However, a good step ladder, that spark plug socket, and the plug wire pullers makes it a breeze.🤙
@D.Boon12 жыл бұрын
@@TheMinuteMasters thanks for the tips ! I have a 95 5.8L and your videos have been very helpful!
@TheMinuteMasters2 жыл бұрын
@@D.Boon1 No problem D! Nice! Im glad I can help you out!🤙
@tomasojeda53032 жыл бұрын
Hey I’m trying to figure out if the engine of my truck is the original one and where I can fine the serial number or vin number in the engine the matches with the one on the truck
@TheMinuteMasters2 жыл бұрын
Excellent question Tomas! Unfortunately I don’t know the answer to the question. I would try going to the Ford truck enthusiast forum and asking your question there or there is a Facebook page called OBS Revolution. Lots of knowledgeable people there.
@Acaidia2 жыл бұрын
The only help I can offer is that if your engine is rebuilt there should be a label indicating so on the underside of the motor. I don't remember exactly where just I remember noticing it when I was under my truck one time. If your motor wasn't rebuilt (at least not by Ford) and was simply swapped with a junkyard or donor truck motor I'm not sure how you would tell. Definitely check the forums and see if anyone else has had this question.
@alejandroduron4479 Жыл бұрын
Good morning just came across your account. Have a question. Have a 92 ford flareside with a 5.8 fuel injected. Truck runs fine on cooler weather but if the weather is over 85 degrees starts running like shit. Have replaced plugs, wires, fuel filter, regulator, map. Check fuel pressures constant 35 psi even when it starts running bad. Cleaned EGR but still no luck. Always fuel up the truck with 91 octane
@TheMinuteMasters Жыл бұрын
Hi Alejandro! Have you read your codes?
@mraider8692 жыл бұрын
Where you get those orange silicone trays, I went to Harbor Freight and didnt find anything like that
@TheMinuteMasters2 жыл бұрын
I bought them from Amazon. They are awesome! Here’s the link👇 amzn.to/3ML4Qwg
@renatomiranda4049 Жыл бұрын
What socket size fit ford 92-96 f150 mitorcraft spark plugs?
@TheMinuteMasters Жыл бұрын
I think it’s a 5/8s. If you search a spark plug socket there are typically two standard sizes. The other standard size is the larger one.
@renatomiranda4049 Жыл бұрын
@@TheMinuteMasters yeah its a 5/8's
@estevan72522 жыл бұрын
Did u change your mind on the spark plugs themselves. Those look like Sp-502’s and it looked like u had 504’s when they weren’t opened. Does it create a better spark?
@TheMinuteMasters2 жыл бұрын
It’s funny you ask about spark plugs. My guy at O’Reilly’s have me plugs for a much newer f150. They were more expensive. Not sure if they are better. I always use regular copper spark plugs. Anyhow, I took a lot of pictures with the original set that I bought and then I had to swap them out for the correct ones when I was partway away through filing this video. Lol
@estevan72522 жыл бұрын
@@TheMinuteMasters thanks for the quick reply! Just got a lifted 502 and the truck needs everything replaced! Your vid’s are saving me so much money from going to a mechanic! Do you got like a patreon? And are you going to be doing a fuel injectors video at any point in time?
@TheMinuteMasters2 жыл бұрын
@@estevan7252 No problem man! Nice! I’m glad I can help you safe some money. I don’t have a Patreon. I like the idea of having one because I can have paid for subscriptions which would help support the channel. I just don’t put out enough exclusive content to make it worth it to everyone. There is a Thanks button at the bottom of videos which I’m hoping people will discover. I would like to eventually replace the fuel injectors in my truck or at least get them cleaned. If you’re looking to do that work, my video on how to remove the upper intake plenum will help you access them easier.
@FranciscoLopez-cc7ui2 жыл бұрын
Hi Steve just wanna ask you where can I get that spark plug socket with magnet the one that you were using where can I get that thanks for your tips this is Francisco
@TheMinuteMasters2 жыл бұрын
Hi Francisco! I actually put a link for that socket in the video description. I bought it from Amazon.
@robbobsjobs84562 жыл бұрын
Getting ready to do a compression check on all the cylinders to see if I need to replace the timing chain as well. Heard if they're equally low like 92 means the timing chain is bad?
@TheMinuteMasters2 жыл бұрын
I need to do that eventually too. I’m not sure if a compression check will reveal a timing chain issue. This is the first time I’ve heard of that theory.
@jamestapscott94002 жыл бұрын
Never heard of a compression check to verify timing chain serviceability. Pull the timing cover and physically check the sprocket and gear for wear, and check slack in chain. More than 1/2" deflection and it needs to be replaced.
@robbobsjobs84562 жыл бұрын
@@jamestapscott9400 this was the video that referenced checking the compression on all cylinders. kzbin.info/www/bejne/rpW1fJuif5aDgtU Matt shaughnessy channel on a 1992 ford f150 video from 6 years ago
@frobles212 жыл бұрын
I got shocked when i tried to adjust the timing. The truck was running but not sure if this is suppose to happen?
@TheMinuteMasters2 жыл бұрын
See my other comment.
@bobbywren1232 жыл бұрын
It will usually start from Relay, while in park with key turned forward using a screwdriver touching both bolts on the Relay on Fender next to Battery. If it starts then you know it's probably the Starter going out or Ground Wire.
@bobbywren1232 жыл бұрын
I've had to start mine like that, gets you going so you can replace it later
@TheMinuteMasters2 жыл бұрын
That’s a neat trick Bobby! I’ll have to keep that in mind if I’m ever stranded.
@robbobsjobs84562 жыл бұрын
Last time for me was the battery terminals were loose, even though I could of swore I tightened them down. Uncle comes over, pulls the negative one right off. Tightens it down, started right up. Lol
@TheMinuteMasters2 жыл бұрын
@@robbobsjobs8456 Battery terminals can be finicky like that. I’ve had some where they were sort of tight but not a great connection.
@EKKoSYKESMusic2 жыл бұрын
With gas prices going up I’m considering converting to propane on my truck. What do you think ?
@TheMinuteMasters2 жыл бұрын
I love the propane conversions but they take up a ton of space. Technically you get the same mpg but at a way cheaper cost.
@EKKoSYKESMusic2 жыл бұрын
@@TheMinuteMasters that’s what I’m sayin. Gas is prolly gonna hit 10 a gallon. So I want to convert to propane. I mean the biggest thing is just the tank. You can just put it behind the back window in the bed yea?
@mraider8692 жыл бұрын
I have a CNG civic, from some past reading I did… you’ll also need stronger engine components. As a daily driver a CNG truck I believe isnt a bad idea but you should take in consideration if your going to be towing, long distance trips, etc; Im in California and we dont have a lot of station’s
@EKKoSYKESMusic2 жыл бұрын
@@mraider869 nah no towing or anything. I just drive it. What’s cng??
@dumdiversaspapalbull14522 жыл бұрын
What kind of tune is this?
@TheMinuteMasters2 жыл бұрын
It’s a tune up/like ignition refresh.
@magicbrainman Жыл бұрын
Should have done a stock 5.0 and not one with a MSD cap. Who goes around with MSD caps ?
@TheMinuteMasters Жыл бұрын
It was cheaper than stock at the time.
@adamfpv82942 жыл бұрын
How many miles did you have on the old ones?
@TheMinuteMasters2 жыл бұрын
It’s hard to say. I think I did my last tuneup and 2017. The Haynes manual says you should do a tuneup every 30,000 miles for I think it’s three years. It’s definitely over those two.
@bobbywren1232 жыл бұрын
@@TheMinuteMasters Ford Tech told me yrs ago on the 5.0 Foxbody Mustangs that the Plug Wires usually go bad before the plugs. ? My 95 F150 5.0 seems to run better with Motorcraft Copper, even with the the MSD Coil.
@TheMinuteMasters2 жыл бұрын
@@bobbywren123 I would believe that. The plugs I took out looked dirty but they certainly didn’t look damaged. I’ve swapped wires before and I felt like it’s improved ignition.
@RX7MAN2711 ай бұрын
Where can I buy your hat?
@TheMinuteMasters11 ай бұрын
Troll Company Clothing online🤙
@IkeReedy2 жыл бұрын
I replaced my spark plugs with E3 Diamond Fire maybe I should go back to Motorcraft
@TheMinuteMasters2 жыл бұрын
Are they not working for you?
@jamestapscott94002 жыл бұрын
Motorcraft copper or Autolite copper plugs is your best bet for stock replacement.
@TheMinuteMasters2 жыл бұрын
@@jamestapscott9400 Agreed 100%🤙
@Acaidia2 жыл бұрын
@@jamestapscott9400 Why not iridium?
@mackendw2 жыл бұрын
add this to your list of things to also consider when doing on trucks for the years 87-93 5.0L engines: www.supermotors.net/registry/media/470415_1
@TheMinuteMasters2 жыл бұрын
Yes! The service bulletins sent out by Ford! I actually had another viewer send it to me. I’ll have to compare it to my wire routing.
@FranciscoLopez-cc7ui2 жыл бұрын
Stevie do you have an account in Facebook I want to send you a picture of my 92 F150 he’s got a 3025.0 also
@TheMinuteMasters2 жыл бұрын
I sure do! Search for Stephen Treacy.
@FranciscoLopez-cc7ui2 жыл бұрын
@@TheMinuteMasters 👍
@thestraitgateway3 ай бұрын
How come your no longer using msd cap?
@TheMinuteMasters3 ай бұрын
I’m told the cap and rotor aren’t anything special. Also, OBS Fords are particularly about motor craft ignition parts.
@thestraitgateway3 ай бұрын
@TheMinuteMasters OK thanks I'll use motorcraft then for all my ignition components. I'm about to do it all this weekend