How to do an oil change on a 2019 jeep grand Cherokee

Hey guys welcome back to the channel I’m glad you guys are checking out this quick video on how to do an oil change on a 2019 Jeep grand Cherokee Limited v6 make sure you check on my Instagram page give that a follow for sneak peaks before videos I posted one KZbin thanks for checking out the channel everybody hope you’re subscribe make sure you hit the notification bell so you don’t miss any videos and I’ll see you guys on the next one!
[e-mail]
/ gasoline_garage_

[@billpholde4816]

Great video. My son was so disappointed in me for not changing my own oil. Now I can stand tall again!

[@MrWhitelightning73]

Thanks. Last oil change was $86 I’m going to start doing it myself 😊

[@authoritativebeer]

Great Vid, the only thing I'd recommend is taking the larger part of the filter cover off (just 1 bolt under that V6 plate. Makes it easier to get to the filter. Also 15/16th socket for the air filter. 1/2" for the oil pan nut. Thanks!

[@windsorcnc]

As per GC use guide, for 3.6L engine FCA recommend to use API Certified SAE 0W-20 Engine Oil. Thank you for the effort, great video! Liked!

[@lexcan05]

I have a 2020 limited X same engine as this....... Pentastar 3.6 liter V6........pretty sure your cap says to use Ow20 not 5w20.........FYI...take that hat off too when taking out filter, 10mm bolt in the middle and it pops off much easier. Use new oil for your o rings to lubricate not old oil.

[@JAYZIGGY5]

It is 0w20. That was the first thing I noticed the moment I started this video.

[@michaelkekatos4472]

To remove the filter cover it’s not a 1 inch socket it’s a 15/16. Didn’t have neither one and ran to Pep Boys three times to get the right one. Bought a 1 inch then bought a three-quarter inch and finally I found out it was a 15/16. 1 inch almost stripped it.

[@Gasolinegarage]

michael kekatos 6 point 1 inch socket takes it off

[@beretta0222]

24mm

[@rciservice1793]

Thanks for the video This will be my first oil change on my 2019... how cool the filter is on the topside and not underneath and in some awkward place where you're guaranteed to get oil all over the place!

[@Gasolinegarage]

Yes it’s not too bad at all

[@mrrsnlk03]

Good shhhhtuff!! A decent amount of money can be saved by watching and learning and changing your own oil.

[@Gasolinegarage]

Thanks a lot !

[@SteveOfMaine]

God bless ya bud! That screw comes off the cover where the oil area. Way easier to get the filter out.

[@Gasolinegarage]

I’m gonna try that next time for sure

[@SteveOfMaine]

@@Gasolinegarage Awesome! Was way easier for me to get it out. Sadly last people who did my filter forgot to screw that top screw back in place. Oh well

[@johnnychaffin307]

Why not remove the engine cover?? one bolt and snap off. Waaaaay easier to reach the filter.

[@Gasolinegarage]

Yes you can do that but it can be done with it in place

[@bigd4863]

Nice will share with my Niece husband so he can do the oil change too.. Stay Bless Brother👍

[@Gasolinegarage]

Thanks a lot !

[@pauljoey7977]

24mm or 15/16. If ur going to make a video don't add to the ignorance

[@Gasolinegarage]

Sorry can’t read

[@nogripes]

Nice job on this one!

[@Gasolinegarage]

Thank you

[@philriri7848]

Hey hey my Friend 👋 just a rockin in to smash out and run the replay. I do wish ya all the bestest enjoy your weekend. 👍

[@Gasolinegarage]

Thanks you to Phil

[@Lex5576]

It annoys me that so many automakers don't make the oil filter covers out of metal instead of plastic. Toyota is guilty of this too. I mean they're not using a traditional metal canister filter, so the least they could do is make a metal cover for the cartridge filter. I changed the plastic cover on my 4Runner for a metal one. Something that important on an engine needs better protection than just plastic.

[@Gasolinegarage]

Good call

[@LandWVid]

Thank you so much! This was very helpful

[@Gasolinegarage]

No problem!

[@media1newsriverside]

Great video, I use AMSOIL 0w-20 great stuff

[@Gasolinegarage]

Amsoil is Really good stuff

[@media1newsriverside]

I am a dealer for AMSOIL let me know if you need any

[@ClockFixer]

Thanks for the VId!

[@maryannkelley7039]

Good job Dan Have a great weekend. 👍😃

[@Gasolinegarage]

Thanks a lot ! You too

[@AdamOsso77]

Why didn't you take the engine cover off?

[@Gasolinegarage]

Next time

[@wisama7091]

good clear video

[@Gasolinegarage]

Thanks !

[@alonsocorona7273]

Gracias

[@andrewgimenes8333]

Mine calls for 0w20. I prefer the Pennzoil Ultra Platinum, purest oil available.

[@martyhall9904]

Is that science based or your preference? I have usually used Castrol Edge with good good results when tested. In my Hyundai's, Pennzoil would require twice the additional oil as Castrol. I think Pennzoil is good oil just not ran in the Grande Cherokee yet. Thanks in advance.

[@trevorshaheen8555]

Great video thanks

[@Gasolinegarage]

Thanks !

[@Digitonic1]

That was awesome man those must have a high pressure oil pump? To have the filter up high like that?

[@Gasolinegarage]

Thanks a lot man !

[@martyhall9904]

I dont know what you consider high pressure but mine runs around 32 psi most of the time. Stomp on it and it runs up to 72 psi.

[@toliklmz4149]

Why didn’t you pop the engine cover off!!!??? Wtf it’s one screw bra

[@jettaibm]

Have you always used Castrol Edge?

[@Gasolinegarage]

For many many years. …. Great oil

[@toliklmz4149]

You should have KZbind this before you made your own video

[@JAYZIGGY5]

Wrong oil for this motor. 🤦‍♂️

[@larrylarkin783]

I'm much dumber for watching this

[@Gasolinegarage]

Thanks for watching

[@eljefe7456]

How you reset the oil % on dashboard

[@Gasolinegarage]

Going into the information Center and just hold the reset button on the steering wheel toggle through all the information until you find oil life

[@pauljoey7977]

Read the manual

[@media1newsriverside]

I am also an AMSOIL DEALER. Let me know if you need anything

[@itchyang5171]

Great stuff dan!!!

[@Gasolinegarage]

Thanks a lot ang !

[@larrylarkin783]

6 point socket. What size? Terrible video.

[@Gasolinegarage]

1 inch for the oil cover for the filter

[@jtomtl]

Why do they have that stupid cover on top.... it’s not cool looking and hard to pull off, I would just leave the engine naked, without the cover

[@Gasolinegarage]

Tom Liu I agree I think companies do that to make it harder to work on the car to tell you the truth