How to Drain & Fill Coolant 2009-2014 Ford F-150

For More Info visit us at: 1aau.to/h/fds/
This video shows you how to drain & fill the coolant on your 2009-2014 Ford F-150.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
🔧 List of tools used:
• Coolant Funnel Set
• Gloves 1aau.to/oaoq/1A...
• Safety Glasses
• Drain Pan
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/fds/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@J410N528]

No radiator cap. I have a 2012 F150 5.0. I don’t see a radiator cap. If I don’t have one, how would I do this?

[@peterhernandez3790]

I was wondering where the drain was at. Video very helpful. Thanks

[@jognir3800]

Why aren’t you using the Ford recommended yellow coolant?

[@BM-vj1px]

It’s not hard to mix guys. Just buy a 1 gallon jug of distilled water and mix it with a 1 gallon jug of coolant. Then you spend half the money. Not that hard of a concept.

[@bearing_aficionado]

I've been watching videos about doing this and lord behold you guys drop a video! Awesome!

[@briandavis1896]

I would assume before draining radiator you should open the ventilation controls to the "hot" position, to let the heater-core drain coolant out so the system is as empty as possible before the flushing procedure is done . Just my opinion.. Good video though..

[@jesseiam7182]

Good video man. It cured my problems

[@abnpanzer8229]

The number of times I've removed the 'funnel' without squeezing the pipe and then wiping up the spilled coolant is embarrassing. A simple recommended fix that never entered my mind.

[@fordstoolreviews9964]

Just drain it and buy pre mix. There's no point in trying to guesstimate. And it's worth it not risking damaging the engine.

[@GJ-is6sv]

On my 2012 F-150 Lariat 4x4 5.0, I recently replaced the heater core hoses, radiator upper & lower hoses, thermostat housing, purge valve, coolant hose and added 2 gallon of anti-freeze. I noticed a difference in the way the gears are changing, and it’s driving or riding better. By making all these changes, can it really help the truck to run better?

[@DLV42]

Excellent video I learned a lot thanks . Coolant funnel an aid in doing it right . Would it be ok to add radiator cleaner to system with water ( after draining system) and then run system with cleaner to get a good flush job?

[@1AAuto]

+@DLV42 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@stevewatts8642]

Ford coolant should be either orange or the newest yellow.

[@georgehall2345]

Thanks

[@carriecree1789]

No, if you have more than 100k miles/12 years old, don't flush your rust holes clear in the radiator. Just drain and refill it.

[@danpena7922]

How many gallons of coolant?

[@larrybragg4194]

Mine has a red cap and it’s hard can’t even get it To turn lol

[@PrincipalityofZeon]

Why the hell are you using green?

[@Ali_grman]

كلامه سريع والكتابه سريعه لا فمهنا كلامه ولا عرفنا ترجمه لكن فهمنا بالمشاهدة اهم شيء عرفت صرة الديتر

[@knowledgeithink]

Does it matter what engine the F150 has where the drain will be?

[@stvargas69]

Video is not for 5.0. Not real helpful, sorry