How To Edit Beatgrid Serato DJ I Beatmatching I How To Count Music

[@DjBlinkBlink]

★16 Tutorials For DJs - Learn How To DJ kzbin.info/aero/PLEayDS13Dep7VcnLMVqOav4L0UUUGbZBi ★ Beginner DJ Tutorial: Mixing, Hot Cue, Loops & How To BeatMatch By EAR - goo.gl/hsFHn3 ★ How To Analyze Your Music Library Using Serato DJ - BPM & KEYS Offline - kzbin.info/www/bejne/nWOXmmOFrb5gZ6M ★ Serato DJ Pro Practise Mode Tips & Tricks - WATCH BEFORE YOU UPGRADE! - kzbin.info/www/bejne/iWKceINroaylfKM ★ DDJ SZ Crossfader Repair, Adjustment and Replacement - kzbin.info/www/bejne/rZDNdmiqaNuGabs

[@stevenreid9005]

Finally someone who explains this properly! I think if the beat grid is a real mess its definitely better to just clear it and do what you did. I've had some real nightmares with adjusting, put one bit correct only to pull another bit out and have to go along the whole track, ahhhhhh. Thanks man.

[@DjBlinkBlink]

You are 100% correct Steve. If the beat grids is a real mess, it's better to clear it and start afresh. Thanks for your feedback and I'm glad you found my video useful. Cheers, 𝘾𝙡𝙞𝙘𝙠 𝙩𝙤 𝙖𝙘𝙘𝙚𝙨𝙨 𝙖𝙡𝙡 𝙢𝙮 𝘿𝙅 𝙢𝙞𝙭𝙚𝙨 👉www.djblinkblink.com/music-downloads 𝙁𝙤𝙡𝙡𝙤𝙬 𝙢𝙚 𝙤𝙣 𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢 👉 instagram.com/djblinkblink/

[@stevenreid9005]

@@DjBlinkBlink Thanks for the help dude! Peace. I had asked our support here in New Zealand about some beat grid stuff and they were friggen hopeless!!! No surprise there, think I've nutted it out now though. Thanks again!

[@DjBlinkBlink]

@@stevenreid9005 you are welcome bro 🙏🏿😎

[@djangelortiz]

Always great to see DJ’s taking time to help each other out. Best Practice: you will notice at minute 4:16 in vid the BPM is displayed at 96. So simply edit 1 bar of the song correctly which will display correct BPM. Then Type that BPM into BPM field of song info and now the entire track is adjusted correctly without needing to set additional markers.

[@DjBlinkBlink]

Thanks for your feedback. Also as per editing the beatgrids, if you set one marker and then just type the BPM as you explained, this won't set the BPM correctly for the whole song. Remember some songs have more than one BPM within the track which means the marker would move as the song plays.

[@djangelortiz]

DJ Blink-Blink agreed certain tracks will change or drift bpm at some point but most current music today is quantized to 1 bpm and will stay consistent beginning to end. Editing beat grids is a major key but alot of DJ’s are unaware because they don’t want to enable simple sync. Good Job.

[@carolinehooper524]

So clear- thanks so much 🙏

[@DjBlinkBlink]

You are welcome 😎👍🏽

[@joesantoro4964]

Thank you for making such an awesome tutorial. I appreciate you taking the time to go over it a few times. Maximum Respect!

[@DjBlinkBlink]

You welcome mate. I'm happy you found it useful.....I need to find time to make some more tutorials lolzzzzz. Don't forget to subscribe to my KZbin channel and also share this video so others can watch it also. If you have any questions about Serato or Dj'ing, feel free to ask in the comments section. One love DJ Blink-Blink

[@wisdom717]

I agree. IT was helpful to me

[@DjBlinkBlink]

@@wisdom717 nice one mate. I am glad this video has been helpful

[@YouriHL]

Damn, never realised it was this easy. I notice the off-grid daily, especially when mixing Psytrance (most tracks are off-grid). This helps a lot. Major thanks. Cheers from the Netherlands, Youri - Indominex

[@DjBlinkBlink]

Lolzzzzz.... knowledge is power my friend. I am glad it was useful for you too, and hopefully others would be able to make use of this tutorial. Much appreciation from me also all the way from the UK to you in the Netherlands my friend. One love 🙌🏿 DJ Blink-Blink

[@ThinDi3sel]

Great tutorial! Highly appreciated!

[@DjBlinkBlink]

Thanks for the feedback about the Tutorial Varun. I really appreciate you taking the time to let me know you enjoyed it. I also have some more tutorials within the playlists, so enjoy. Much blessings, DJ Blink-Blink

[@geraldmcclaren]

Excellent and concise explanation on how to set beat grids in Serato Dj. The explanation was very easy to follow, nothing was left out. I have Serato Dj Pro and I'm using a Macbook Pro. I would like to know how to tap a bpm manually. I can tap a beat bpm manually in Serato Dj but with the mac and Serato Dj Pro, I'm having some problems. Thanks.

[@callumsmith710]

Great video thanks so much!

[@DjBlinkBlink]

Thanks for your kind feedback Callum. Much appreciated 🙏🏿 Cheers, DJ Blink-Blink 𝘾𝙡𝙞𝙘𝙠 𝙩𝙤 𝙖𝙘𝙘𝙚𝙨𝙨 𝙖𝙡𝙡 𝙢𝙮 𝘿𝙅 𝙢𝙞𝙭𝙚𝙨 👉www.djblinkblink.com/music-downloads 𝙁𝙤𝙡𝙡𝙤𝙬 𝙢𝙚 𝙤𝙣 𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢 👉 instagram.com/djblinkblink/

[@C-Dub1906]

Thanks Bro. Just switched to serato and trying to organize my library. I’ll give this a try...

[@DjBlinkBlink]

You are welcome mate. Take a look at this link also to watch more about Serato DJ layout and hidden menus kzbin.info/www/bejne/iWWbq2WthNCmrrc One love, DJ Blink-Blink

[@SPCBRAWLERZ]

Thanks for this video Bling Bling! Well shown and said!

[@DjBlinkBlink]

SPCBRAWLERZ thanks mate 😎. Glad you enjoyed it...don't forget to subscribe to show your support (you would also get notifications when I upload any new tutorial). Cheers DJ Blink-Blink 🙌🏿

[@djamstrongonedanentertainm8060]

Trank you bro very helpful

[@DjBlinkBlink]

You are welcome bro and I'm glad you found the video helpful. One love, DJ Blink-Blink

[@danieladdo1958]

Thank you, very very helpful.

[@DjBlinkBlink]

Daniel Addo thanks for the feedback mate 😎

[@danieladdo1958]

Sir am a beginner and I will be glad if I contact you privately for your support. Am in Ghana, west Africa.

[@DjBlinkBlink]

Daniel Addo that's fine. Buzz me on my WhatsApp number. I'm always happy to discuss how to improve your DJ skills. One love DJ Blink-Blink

[@cristiantorreslozano1006]

yes ! Blink Blink ! well explained thanks !

[@DjBlinkBlink]

Thanks for the feedback Cristian Torres. Cheers!

[@deejaycryptonite2542]

Nice tutorial bro, I went to a DJ academy and got a serato without the grids,so there's a something they had done with the grids on the software 😁😁😁

[@DjBlinkBlink]

Thank you bro for your feedback about my tutorial. Yes, the grids on Serato were part of an update that was added later. It does throw people off sometimes but it can be learnt easily as I explained in the tutorial 👍🏾😎 Much blessings, DJ Blink-Blink

[@deejaycryptonite2542]

@@DjBlinkBlink do you have a way I can get vocals and instrumentals from various artists,maybe you have a Telegram channel for such content,let me know....I have been searching of a proper channel to get these things tho

[@DjBlinkBlink]

@@deejaycryptonite2542 unfortunately I don't cos it's not something I make use of 😎

[@deejaycryptonite2542]

@@DjBlinkBlink if you find one,let me know

[@brainbeats7555]

Love me some Blink-Blink.... Fun teacher... Need to hear his mixes....

[@DjBlinkBlink]

Yes ooooooooooo. Thanks for the feedback Shane 😎

[@laradenesrocha284]

Hello! My Beat matching is late like yours. Do you know how to adjust it?

[@DjBlinkBlink]

Hello Lara, you can either follow my instructions from [1:56] or just wipe the grids and then put down the first grid with "the first down beat". Cheers, DJ Blink-Blink

[@michaelcoleman8203]

Hey Dj blink blink I watched your video on beat griding but what about people who have serato Dj pro thanks

[@DjBlinkBlink]

Hello Michael, thank you for your message. This will be the same principle or process as I have always used Serato DJ Pro 👍🏽

[@michaelcoleman8203]

@@DjBlinkBlink ok sir thank you

[@michaelcoleman8203]

One more question blink blink when you select reset you are resetting the marker and the grid is that correct thank you

[@DjBlinkBlink]

Do you mean "clear"? As "reset" is not available when setting the grid. When you select "clear" it will clear the last marker you made. Continuous selection or pressing of clear will delete all the grids

[@michaelcoleman8203]

@@DjBlinkBlink I maybe saying it wrong what I'm saying is suppose you load a song and the software sarato picks it up as starting in one place but you know that is wrong what I'm asking is to correct that I could select clear and reset it correct

[@DjBlinkBlink]

@@michaelcoleman8203 yes you can do this

[@nesbornenedd1008]

How can I use echo with my sarato dj numark

[@DjBlinkBlink]

Hello mate, If you don't have a dedicated button for "Echo" on your controller, then you would have to buy the "FX expansion pack" from Serato DJ. Cheers, DJ Blink-Blink 𝙑𝙞𝙨𝙞𝙩 𝙢𝙮 𝙬𝙚𝙗𝙨𝙞𝙩𝙚 𝙛𝙤𝙧 𝙁𝙍𝙀𝙀 𝘿𝙅 𝙢𝙞𝙭𝙚𝙨: www.djblinkblink.com/music-downloads 𝑴𝒀 𝑰𝑵𝑺𝑻𝑨𝑮𝑹𝑨𝑴 𝑷𝑨𝑮𝑬: instagram.com/djblinkblink/

[@TheHardRage13]

I have made an 8 bar sample on ableton and want to play it on serato but it does nothing when i push to set beatgrid, nothing happens, can someone help?

[@DjBlinkBlink]

Have you analyzed the sample itself?

[@TheHardRage13]

@@DjBlinkBlink Yes i did,

[@DjBlinkBlink]

@@TheHardRage13 so do you have any grids set at all on this sample? Did Serato highlight some set of grids already?

[@kennedymensah1234]

Hi mr Dj, I have quick question Beatgrid every song I have to edit?

[@DjBlinkBlink]

Hello Mr Kennedy, Personally I check the beatgrid of every song I download. If it is not set correctly, then I edit it. This makes it easy for me when I'm mixing cos the beatgrids are then set as required. Remember though you don't need to edit all the songs you download cos most of the time the beatgrids are set correctly already. Cheers, DJ Blink-Blink

[@firejames4773]

We got to do this for every song?

[@DjBlinkBlink]

You don't have to do this for every song. Any correction of the beatgrids is done only if necessary

[@dywanecrandell2739]

@@DjBlinkBlink I been trying to get bpm down pact counting beats to improve my mixes in serato dj . my question is when I have two tracks loaded and set to 125 bpm when looking at the waveform should the numbers be aligned on deck a and deck b if beat grid is set correctly or how do i tell by looking on lap top at the waveform if both tracks are aligned correctly ? If you could break it down I would appreciate it

[@DjBlinkBlink]

@@dywanecrandell2739 To answer your question, the numbers and the grids have to be aligned when you have BEATMATCHED the track. This means when you look at the waveform itself, the bars and the numbers on top of the bars would be in sequence and aligned (note it does not have to be the same number for both waveforms). So if your beatgrids are properly set, you would be able to align this easily. However if your beatgrids are NOT properly set, you would be able to listen by ear and you would make any necessary adjustments. I would make a tutorial about this hopefully soon which should explain this visually. If you do have any more questions, feel free to ask here. Cheers mate, DJ Blink-Blink

[@dywanecrandell2739]

@@DjBlinkBlink Thanks alot you cleared it up some for me im going to keep working on it definitely can't wait for that video . one other question I have is - Will the down beat always start on red in wave form or will it start on yellow or any other color for instance on Chris Brown back to sleep sounds like it start in yellow to me . Also How can i tell if the bpm is not correct on a song I.e. I had tone loc - wild thing analyze in serato dj first it was 63bpm then I analyze two more times and it was 126 bpm . only reason made me check was i saw someone else had the same song but there's where set at 126 bpm and when i look it up online it showed the key and that it was 126bpm .

[@illreel5169]

will this set the correct BPM?

[@DjBlinkBlink]

Yes, it would. However you need to analyze your library. I made a video explaining how you can get this done. Click this link to watch it kzbin.info/www/bejne/nWOXmmOFrb5gZ6M

[@OneSquidOneBike]

I have a ton of songs that are off. So this has to be done individually with each one??

[@DjBlinkBlink]

Hello mate. Yes, you would have to do them individually. Best way to get this done is to start with the songs you use a lot, then you can progress to other tracks that their grids are not properly set.

[@OneSquidOneBike]

@@DjBlinkBlink thank you brotha

[@DjBlinkBlink]

@@OneSquidOneBike you are welcome brotherly 🙌🏿

[@chinot-8004]

Then why dont you start with the second option allways 🤔it Was pretty fast to...

[@DjBlinkBlink]

Yes, the last option to wipe out the grids and set them manually was faster, however I had to explain all the options you can use to edit the beatgrids to ensure the viewers of my channel know how to edit the beatgrids no matter the problem they have with their grids.

[@shakleton768S]

pompomp!

[@DjBlinkBlink]

Thanks mate 👊🏿

[@brendonalman3611]

I don't fully understand

[@DjBlinkBlink]

What part of the tutorial exactly don't you understand? Cheers, DJ Blink-Blink 𝑴𝒀 𝑫𝑱 𝑴𝑰𝑿𝑬𝑺: www.djblinkblink.com/music-downloads 𝑴𝒀 𝑰𝑵𝑺𝑻𝑨𝑮𝑹𝑨𝑴 𝑷𝑨𝑮𝑬: instagram.com/djblinkblink/

[@Aesop101]

No idea what you’re talking about

[@DjBlinkBlink]

I was explaining how you can make use of Beatgrids, set your grids etc which are tools that aids DJs when mixing with Serato DJ software. Cheers, DJ Blink-Blink MY FREE DJ MIXES: www.djblinkblink.com/music-downloads MY INSTAGRAM PAGE: instagram.com/djblinkblink/