How To Epoxy Coat Your Garage Floor | Must Watch For Diy'rs

#Epoxygaragefloor #Garagefloorepoxy #Mikedayconcrete
LEARN HOW TO EPOXY YOUR OWN GARAGE FLOOR HERE:
mike-day.mykaj...
This video will show you how you can apply a tinted, 100% solids epoxy coating to your garage floor. I show you how to prep the concrete floor, how to remove an existing coating or paint, then how to apply the primer coat, colored epoxy coating, and a urethane top coat to protect the epoxy.
This is the best way to install an epoxy floor coating to your garage floor. If you're thinking of installing your own epoxy floor coating, this video shows you the steps involved and the process it takes to roll on the epoxy.
My crew and I are epoxy coating experts. We install epoxy floor coatings for our customers garages, shops, basements, showrooms, and much more.
My epoxy coating course teaches you exactly how my crew and I install epoxy coatings in garages just like the one in the video.
The course also shows you all the tools and supplies you need and the best places to get them. It tells you what I use for epoxy and why it's my favorite.
MY PRIVATE MEMBERSHIP - THE CONCRETE UNDERGROUND
www.theconcret...
MY STAMPED CONCRETE COURSE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykaj...
GARAGE EPOXY FLOOR COATING COURSE: FOR SOLID COLOR FLOORS
mike-day.mykaj...
HOW TO INSTALL AN EPOXY FLAKE GARAGE FLOOR COATING COURSE:
www.theconcret...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
FLOOR FINISHING POWER TROWELS:
amzn.to/3abyIAf
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

[@ConcreteFloorSolutions]

Bravo for preparation. You are one of the few people that shows diamond grinding as preparation. Great job installing the prime coat also. That looks like a very durable floor. you did a great job

[@MikeDayConcrete]

Thank you!

[@khazma2005]

@@MikeDayConcrete what epoxy coating did you use before the clear coat? Can you recommend the products?

[@gabedelreal86]

What company makes the material you used for this project and if it’s a new garage that was poured less than a year ago, do I still have to grind or can I just drop an etch liquid?

[@sGhost-er2up]

I love you guys’ work flow. I got hired last week at a local company and every work day is hectic bc i work with a guy who has me do everything except roll which I understand. I know im learning but i think he just wanted someone to do everything for him. I get it. I want to learn as much as i can and then quit and subcontract for someone else. He also skips steps like acid etching or washing concrete. He also doesn’t add primers.

[@Openthrottlerc]

Acid isn't always a must but primer is.

[@itsmiked7778]

Honestly Homedepot has a Great Epoxy and Colors ..and yes we grind the concrete floor prior havent had any complaints

[@LUMLEY92]

Are you using the Rust-Oleum Epoxy Shield?

[@aarongarcia1101]

I installed a kit from Lowes, didn't do any of this grinding or prep, and its been nice and shiny for going on 5 years now

[@user-fb8jb5yi6g]

I resurfaced concerte first. Used etching. Then primer, then epoxy, then sealer. Works great.

[@jayjaybmgvlogs3025]

Mike following for 1 year and i wanted learn how to epoxy coating on concrete n i see you daylie foing videos pouring concrete cux i do concrete n im just proud ur my teacher again glad see u have 1 mil more views on this video love your worlds n help thanks you

[@kennytang3826]

Hi Mike, Do you recommend grinding the garage floor in a brand new house? Thinking of epoxying the floor before moving in.

[@thomaslotito380]

Mike, you’re a pro, I appreciate your expertise and help in your videos. Thanks! Much success!

[@MikeDayConcrete]

Thank you!

[@nd7368]

You didn’t link what primer you use… is that something you would share with your viewers?

[@beckyryan9083]

I was going to epoxy my basement floor. However, after watching this I have decided not to. I can't risk doing it wrong the first time- financially or emotionally. I appreciate you for showing me the real problem I'd have gotten myself onto. Thank you immensely! I'll just save up and get it done professionally. 👍

[@deanm72]

Damn I just watched this video and thought the same thing you said. I will have to hire a professional.

[@eddwinnas]

my friend did it himself did everything in this video and a year later it all came up.

[@wilky15]

@@eddwinnas He ever figure out why?

[@eddwinnas]

@@wilky15 i think ground was a bit wet it didnt in other room

[@vijaluable]

Is always a good experience to do it yourself!

[@since4everrr]

hi mike, i recently completely bullshitted my way into a construction job and i've been watching your videos to learn everything because i literally had no prior experience. well i've been promoted twice now 😂 so thanks for helping me fake it 'till i make it

[@usr1996]

😂😂

[@lianealbert7728]

🤦🏻‍♀️🤦🏻‍♀️ I hope your employer doesn’t find you on social media. My company fires people who willfully lie on their resumes. You can injure or hurt yourself and you could screw up jobs depending on what it is.

[@usr1996]

@@lianealbert7728 ok karen

[@since4everrr]

@@lianealbert7728 i’m applying auxiliary breaks to houses liane, relax. At the time of my comment i was promoted twice and since then I’ve received a raise for my performance. Also I received 2 weeks field training as is standard for general labour employment in my Province. 3/10 overall sloppy comment, i expect better from you next time

[@solarflare4259]

Thank you Mike! will start doing my new built 370sq ft garage floor this afternoon...

[@flipflopsneeded]

Great straight to the point with a lot of honesty. Thank You Sir!

[@alfonsosoumynona6583]

Its good to know what kind of prep it takes to do the job right, im mainly going to use my garage for storage and maintenance work on the cars, I think i will be fine with the cheaper stuff, also since i dont plan on living here forever

[@kurtzbradley]

You guys always make it look easy……like the squeegee…I am sure getting that spread evenly is very difficult. Get it on uneven and then what. Prep looks tedious…and very important. You guys excel at everything I watch you do.

[@stevegannaway1787]

Thank you for taking the time to create this video. Very helpful!

[@w04mach1]

I subscribed after watching this video, and another before this. Thank you for the quality info. Always great to see someone who takes pride in their work. 👍

[@mrt2734]

Floor came out awesome, big transformation.

[@david.thomas.108]

Professional job, detailed to a high standard, thanks for sharing.

[@MikeDayConcrete]

Thanks David!

[@manuelolivares7254]

Question if you put on your driveway how long it last south texas heat

[@poorboybmx2511]

How do you walk on it while working without leaving footprints everywhere? Lovely job you've done👍

[@MikeDayConcrete]

We're wearing special spiked shoes, like golf shoes or baseball cleats.

[@JenyaFookleff]

If you play some grass-based sport you're in luck, I suppose.

[@CarlosCastillo-vh2bx]

Great video! Glad to see a pro doing it right. I’m a contractor and a customer asked me to do epoxy on a storefront floor... never again will I mess with it. We used that rustoleum stuff and it was absolutely horrible. We diamond grinded, etched, cleaned and followed all directions.They offer a guarantee but I sent the pictures and they wouldn’t respond. Took twice as much product to finish the job over $700 in kits plus machine rentals. Would have been better to hire pros like yourselves

[@MikeDayConcrete]

I run into that a lot. People trying it themselves without really knowing just how or what needs to be done. That's why I made the course.

[@brianaalienana5110]

Can you mention the brands you are using in this video? Thanks in advance. The video was very knowledgeable

[@DIRT-BOSS]

Wow what a difference! Nice work Mike

[@MikeDayConcrete]

Thank you!

[@AliAhmad-gr6hk]

I got epoxy done for 2 car garage. I wasn’t interested in the very smooth finish because the winter and slips. So I did 2 coats with lots of chips. I realized when guy was done, some area when touched are very rigid while some areas had shiny smooth epoxy. I told him about it and he said this is normal to avoid slipping. Not sure if I got robbed and he’s being lazy. I paid $1650

[@Cartec09]

Ali Ahmad good luck keeping dirt from getting stuck in the rough areas. Sounds like you floor is a bit wavy. There’s a way to do 100% flake coverage, yet not have rough areas. I can’t tell you all the secrets, or I’d be out of a job. 😏

[@lisasievers6999]

If you’re not in his area, you don’t have the job anyway. Pay it forward. Unless you don’t watch tips from professionals…?

[@psidvicious]

That’s a suweet lookin floor! Never worked with epoxy floor coverings but I’m gonna go ‘out on a limb’ here and bet that the secret to a nice looking epoxy floor that lasts is probably gonna be the prep work? Almost true with anything really. Prep, prep then prep again. 🤜🤛

[@MikeDayConcrete]

Yes, the prep work is really important. That's why most homeowner diy epoxy floors fail. They're told to just acid etch then apply the big box epoxy. As soon as they drive on it with hot tires the epoxy peels right off under the tire. I grind all my floors before we do our epoxy floors. Never had one fail yet.

[@Cartec09]

Mike Day Everything About Concrete 🤥

[@kevinneufeld9711]

SIKA EPOXY IS ONE OF THE STRONGEST GRADE EPOXY. if your spending the money to get epoxy flooring done, get the right stuff. No shade to the creator of the video, if the epoxy is done properly with correct mixtures the finished product will last decades if not forever without gaining cracks or breaking chunks free. I have used Sika since I first began epoxy, and my dad did his floor and it remains unscathed for 20 years and counting

[@kevinneufeld9711]

I hope this comment was helpful! The application was correct just the grade of epoxy was low or maybe the mixtures and times for them were incorrect

[@lebrink9810]

I couldn't fund the link to what kind of Epoxy you used? Thanks

[@haikudragon1002]

I would love 2 have a business like this, its so relaxing to watch, and do.

[@Roach7776]

Costs around 100 grand for all the gear plus a van and trailer to carry it in, after that it’s cost of materials, once the first jobs done it’s all maintaining gear like rollers and grind wheels and such. Cost of material will be paid off first job, it’s basically floating the product to the customer until they pay. After that it all pays for itself as long as you do good work

[@Roach7776]

Some schooling required but it’s nothing compared to other trades

[@Sajnasayed]

And believe me it's back breaking at first days don't give up

[@nicolestewart8928]

As much of a DIY'er I see myself as, I'm convinced I'm hiring a pro after watching 😂😂😂

[@billshreeveable]

Thanks for sharing your experience and knowledge, gonna do this in the spring.

[@MikeDayConcrete]

Thanks Bill. Are you a subscriber to the channel yet?

[@woodlandburl6648]

Great job. Looking forward to doing this on my garage floor.

[@MikeDayConcrete]

Makes it brand new again.

[@joelsalto2731]

I'm glad I seen this video, I bought some 1prt epoxy paint and some clear epoxy from the big box stores, I wasn't even going to use bonding primer lol thanks for the tips

[@natee2169]

That’s kinda sad though that you’re saying the epoxy you buy from big brand stores Lowe’s/Home Depot just won’t last long lol I think you just crushed half our dreams 😂

[@Livhoops_24]

Me after buying it from homedepot this past weekend 🥲

[@EM-sc3pr]

We ought to sue Home Depot

[@debbiem73]

I noticed at Home Depot, the Dry Lok is right next to the epoxy stuff … wonder if dry lok would be a good primer

[@Javii96]

The video made it sound like its because folks don't prep the floors good first though. I've never epoxied floors but i've done a lot of diy spray painting and prep is everything. Even cheap spray paint looks and resist great with good prep.

[@Asvmad]

I've had rustolum epoxy for 8 years in shop from home depot and help up fine with tons of use on floor I'd buy it again in a heart beat

[@jd-it4on]

I run a pressure washing business as well as a handyman business and i just had a guy call me that owns a transmission shop 5 bay and asked me to do this for 2k including materials which sounds crazy to me. Ive never done this before but after watching this i definitely think he is crazy wanting it all done materials and labor for 2k

[@MichaelCGatesMusic]

Thanks! You save me from ruining my garage floor.

[@MisterDimos]

Thanks for the video; nicely done! If someone wants to use the chips, when do those get applied? Do you have to do it as you apply the epoxy or can you apply the epoxy and have time to spread the chips? Thank you!

[@astroplutonium]

Damn thats some fine smooth job you done there.

[@MikeDayConcrete]

Thank you

[@RandomRads]

I bought epoxy 2 years back and then chickened out. Now I’m pulling courage to do it. My question- is there a expiry for epoxy?

[@MikeDayConcrete]

It should be still good if you didn't open it and it didn't freeze.

[@olegproscurchin8200]

I have a very bad garage concret floor, grinding only won’t help, means I need to go down 4-5 mm. Any idea what I can use to level/fix it first before applying the epoxy? 😢

[@adamfederer3937]

I do epoxy floors too for a living in central Ontario good video. I do a lot of concrete repair and outdoor one part epoxy with anti-slip grit. Keep up the great work!!!

[@canadabboy]

For concrete with some mild surface damage how do you repair?

[@RenegadesGarage]

Mike Day Everything About Concrete.. Now I just need you guys to come do my garage floor... That would be awesome!!!

[@Cartec09]

It’s extremely slippery when wet. Especially with snow or ice. I’d highly recommend a clear silica sand or colored quartz. (Could save your life) I do epoxy/polyaspartic floors for a living. We have never done a floor without it.

[@calebwiebe7826]

There are some epoxy coatings that offer skid resistant material, depending on the area and what kind of traffic it is receiving.

[@gpleeser5832]

Great video!!! Quick question...if I primed after I cleaned and etched but didn't grind the concrete will it still peel?

[@DannyPerry160]

Great stuff! If you're dealing with new construction, will the floor still need to be prepped or will it be good to go?

[@Afrocow]

Great question, would love to hear the answer to this as well.

[@nickbazant9587]

Yes it will need to be prepped. The purpose for grinding is opening up the pores of the concrete to create a surface that the product can grab and bind to. Even newly poured concrete will dry in a way that will not be ideal to bond to whatever product is being applied. Hope this helped!

[@redskins5926]

Yes, I just had my newly-built home done and they still needed to grind the concrete. Not to mention, for a new slab it was already dirty as the construction crews had stored equipment and even parked in the garage while the home was u see construction.

[@2333jc]

They put a clear sealer over it, you probably need to grind off

[@DRader150]

Curious about grinding little areas in the corners that the grinders can’t reach?

[@patrickreed3213]

Geez guys you make it look so easy! I'm going to attempt it in my wife's garage (attached with in floor heat) before I do mine!! I'll do it this early summer, got to remove all her "stuff" in they'a beforehand. We built the house w/attached 2 car garage in 2015. Floor is in good shape with no cracks.. so after watching you guys here I think I can manage it. I'm up in Orrington not wicked far from ya! What do you recommend for the base coat and topcoat brands? I don't want to waste my money on Home Dump cheap products. I'd like to do a full flake broadcast and then the topcoat to seal her up. Look forward to your response and again thanks for the wicked awesome videos! Oh, I am at work in the Arctic circle watching your KZbin channel! Cheers!.. fellow Maniac!

[@poshko41]

So if you grind the floor first, do you not have to mess with acid etching?

[@danielstephenson8830]

My opinion is that you use acid to ech the concrete to make for better adhesion. Grinding it back to bare is effectively doing this. But if you want a super slick finish you can do both followed by filling any holes or uneven surfaces. Grind again. Vacuum all debris and dust. The seal it

[@barryallen2535]

What is a fair price to prep, seal and epoxy an average 500sqft garage?

[@abdou6003]

cool video, I have 3 questions if you or someone would kind to help: what if garage f'oor is slopped towards a drain? will the epoxy run off the concrete ? what if you have repaired cracks, does the epoxy hide it all? what if your concrete is cracked heavily, and/or bucketed towards the the wall do you just use leveling cement and use epoxy?

[@MikeDayConcrete]

1. Unless the slope is very steep, the epoxy shouldn't run to the drain. Always tape over the drain though to protect it. 2. The epoxy will hide the repaired cracks, yes. 3. You can repair it with some kind of leveler. Just have to let it cure fully before applying epoxy over it.

[@Djneyon79]

When you said primer I said hahahah I would have went to Home Depot and been the big dummy to not think 💭 about that and I’d be calling about my floor is peeling help…😂 I just watched a video before yours and got inspired. And this was a hey hey hey 🛑 hold on watch this first.

[@orsoncart9441]

How is it that it does not stick to the shoes when they are applying it?

[@MikeDayConcrete]

I'm wearing spiked shoes, like baseball cleats.

[@mezh92126]

What sort of mask do you recommend when sanding the concrete?

[@MichaelCorrente]

Hey Mike, really great video. My old man used to say "Always enough time to do it over, but never enough time to do it right...just do it right the first time" What do you think of the rustoleum epoxy kit?

[@MikeDayConcrete]

I've never used it myself, but if it's not 100% solids forget it.

[@tylerrue3108]

@@MikeDayConcrete I just bought one of those Rustoleum kits but after watching your video, I think I'll return it. I'm not hearing great things about them, especially in the coverage area. Some people are saying they need 4 to cover a 2 car garage properly. At $214 a pop at Lowe's, might as well just hire a pro or go your route. I would like to try it myself still, so I think I'll just take your advice. Just need some of those fancy shoes you guys have on lol.

[@brianhaygood183]

@@tylerrue3108 We did our shop floor at work with the Rustoleum ten years ago. Worked great and has held up very well. There are a couple of areas right under the lift that have been cleaned 100 times with solvents and we've got maybe three dime sized areas that basically just wore through that showed up when I pressure washed it. I've spilled every automotive fluid out there on it, dragged forklift forks across it, and generally just used it, and it has held up great. Using brake cleaner on it is the only thing I've found that actually damages it, so don't do that.

[@v3fitclub546]

Hey Mike...I’m not seeing where the course you offer is located...Can you please guide me? Thank you

[@erichsh58]

3:20 How do you manage to step all over the floor coating you just poured without leaving footprints on the rest of the garage?

[@MikeDayConcrete]

We're wearing spiked shoes.

[@kaseycentanni753]

What kind of primer should we be buying ? Is it latex ? A regular wall primer ?

[@alanm6764]

Great Video Sir, my question, I have a 30x 40 garage, the concrete has a vapor barrier and is about 2 months old now (smooth finish) do I still need to do the grinding step on fresh concrete or will an etching type primer do the trick?

[@MikeDayConcrete]

For the best long term adhesion, I'd grind it.

[@Crab.with.abs.]

What kind of shoes do u wear for this ? It doesnt look like it spreads when u step on It

[@noahscholl8995]

A lot of people use baseball/football cleats to reduce surface area contact.

[@Crab.with.abs.]

@@noahscholl8995 yes I was able to figure that out :) thank u very much Noah

[@WheelerRickRambles]

I notice how y’all can step on it immediately … how is that?

[@777chumma]

Hello, great video. Our garage has concrete slabs with paint on it. How do I prep the floors for that. Should I still grind the paint off or can I use some other method to remove the paint layer. Thank you

[@MikeDayConcrete]

Grinding usually works the best to remove the old paint and prep the concrete for the new epoxy.

[@BoxerDogs]

So you have 3 layers? First layer is a primer, than the epoxy layer, then a polyurethane coating?

[@MikeDayConcrete]

Yes.

[@Mohanad_Seventies]

Question!! We have done the craftsman epoxy, we did scraped the floor use degreaser and let it dry one day, applied the mix and it was good after 15 mints alot of small (bubbles)holes start showing up in several areas of the epoxy in these (bubbles) the concrete is showing up the bubbles sizes are about pennies sizes! Can someone please tell us what is the reason behind this problem? Thanks.

[@justame7638]

does your course explain about sqft rates to customers? I can cost anything concrete, but Apoxy know nothing about it. Anyone here bought his course? I'm usually very wary of buying courses, but I trust MIke!

[@MikeDayConcrete]

Along with the course you get access to me for help and questions. I'll help any way I can.

[@nexamax]

That's a FANTASTIC tutorial step-by-step, Thank You! Now I need to get some spiked shoes! How much do you charge in your area for a 750 sqft garage for the job advertised? Looks like a 2-3 days project.

[@the_freedom_movement]

Love this, I'd like to do this as a business.. how do you decide your price that you charge? Also I'm going to buy your course

[@MikeDayConcrete]

I talk and help you with pricing in The Concrete Underground.

[@hoah1158]

Thanks, Chief

[@magdalens824]

Great video. Thank you for all the info!

[@MikeDayConcrete]

My pleasure!

[@motto834]

why are your feet not dragging the epoxy around? i see you stepping on it but do not see your footprints moving it. is epoxy not sticky when it is wet?

[@MikeDayConcrete]

We're wearing cleats, like baseball or golf shoes.

[@MrCustomConcrete]

yup that's how ya do it

[@MikeDayConcrete]

Amen Brother!

[@bluwng]

Won’t a shiny coat reduce traction and increase probability of sliding if your tires are wet or it’s icy outside?

[@AlexanderSchrepfer]

Is that just a normal 7" grinder? What sort of head do you recommend for that? I saw you mention the DiamaBrush for the larger tool; is it the same sort of head for the handheld?

[@maiseydoodle]

Looks nice but looks like it would be extremely slippery when it gets wet?

[@meshisha77]

If its a brand new garage... new construction do you need that diamond grind step or can you go straight to cleaning then priming?

[@kenfenell2586]

Do your guys have spiked shoes? I’m watching them continuously walk on wet product and I don’t see foot prints

[@ggv69340]

Do I need to add the speckels or can I just leave it plain

[@MikeDayConcrete]

You can leave it plain like we did to this one.

[@barginfinder4u]

Would you recommend washing the floor before grinding or after? Thanks

[@USA-1984]

what floor primer should we use? any brand?

[@MikeDayConcrete]

I'm using Elite Crete brand on this one.

[@athomeandtravel995]

Great video. Whats the process for a brand new concrete garage floor in a new house build. Just start with the primer or can the primer step be skipped?

[@tomdonnelly611]

Hi Great video and thanks! I have a brand new house with a clean white garage floor that has never had a car on it yet. Do I still need to go the the Diamabrush step or should I just use a cleaner and then the primer coat?

[@rhlopez2694]

can you just primer over paint ? The place I work at want the floor epoxied, but it is a semi-cleanroom and particles can become an issue.

[@MikeDayConcrete]

No I wouldn't. We always remove existing paint & coatings before applying a new one.

[@Jeziorski7]

what do you think about the H & C kit? does that have everything you need or should you buy something else?

[@jeffwallace5261]

I am not able to empty my garage to coat floor. Can I move everything to one side, do floor? Wait 2-3 day move everything to completed side , then finish floor? Not the best way I know but I have no choice. Thanks

[@MikeDayConcrete]

Jeff, you can, yes. If you don't have a saw joint in the middle of the floor for a stop point, just use some tape (blue or duct) and tape a straight line. Do your epoxy, then pull the tape about an hour after you lay the epoxy. It'll leave a nice straight line. Then tape on top of the epoxy when you do the other side.

[@elvinzambrano239]

How long do you have to wait before applying polyurethane top coat??

[@ejshelby5460]

If you apply when concrete is still curing (dry to the touch but not quite 120 days yet), will the moisture well up and form a wet spot visible from the above? There’s a mysterious pool of wetness in my shed but there’s no roof leak anywhere

[@MikeDayConcrete]

Can't have any moisture coming up through the floor and use this stuff. Have to fix that first.

[@savioromie1836]

when you roll you don’t leave roller marks. why is that? is it because the roller marks disappear because the epoxy self levels?

[@FLASHESZ]

What if you don’t want the primer because you like the look of bare concrete with epoxy

[@TheChildTrain]

I did my garage floor about 6 months ago, and I used Sakrete Flo-Coat to try to level the garage, due to pitting. I did grind off the existing paint. What should I use or do to repair the pitting and spalling before applying the epoxy?

[@sydewayzmo3905]

Beautiful work!

[@brendabeltran6038]

Is it possible to use a drywall sander to remove epoxy and prep garage floor for new epoxy?

[@JeffRothe]

What product do you recommend to fill in the cracks? I scrolled through about 100 comments and didn't see that asked, sorry if it already was.

[@toomuchmcdonalds]

I don’t know what they use but where I work we add cabosil in the mix to patch

[@tommyconner2399]

Can you round the corner between the block wall and the concrete floor, then paint the epoxy up on the 1st row or two of a concrete block wall? Also, where are you guys located? I'm in east Tennessee. I wish I had you guys to do my floors (and walls) at my workshop!! What filler material would you use to make a radius transition between the floor and the walls?

[@sportdrinkfruitpunch]

Amazing work.

[@danielc9026]

Hi, great vid. Could you please tell me what is the best type of roll to apply the epoxy paint with? Thank you very much in advance. Dan

[@pozmarciv]

Hi Mike , I recently moved to Florida and have a new driveway that I would like to epoxy. Where do you purchase your product? Thank you

[@MikeDayConcrete]

Look up Elasti-Deck, that's what you'd use for a driveway.

[@pozmarciv]

@@MikeDayConcrete Thank you , and thank you for your videos

[@brianreip411]

thank you, would you want to have all the walls and benches built before you put this down or can I build over the epoxy?

[@holyghostpower938]

Walking on top of the fresh primer and epoxy doesn't leave tracks?

[@juancruz9675]

What is under the shoes or what shoes are they, I see they can walk all over it without it tracking footprints

[@JC-jc2lo]

What’s the difference between a driveway coating and a coating for a garage floor? Sherwin Williams is recommending a water based enamel stain by H&C called heavy shield. What do you think?

[@jskillz5471]

Thank you sir 👍🏽💯

[@Minnzella]

What kind of shoes do you wear so it doesn't get on them ?

[@MikeDayConcrete]

I wear baseball cleats