HOW TO - Epoxy Your Wall - Epoxy Wall Coating - Countertop Epoxy - Vertical Epoxy Coating

[@yoservs]

hi, is this product be waterproof? would it be advisable to use it instead of tiles in a shower?

[@skilledindividual]

I’m interested in this question also

[@MohammedTayif]

@@skilledindividual It is search in google and u can find it

[@jacobgeorge6754]

i have done same think in the shower and till now dont have problem in the shower water proof %100

[@simonbowley9164]

How would you do a white marble effect, i can see how you would do the white base coat but how to get the veins ?

[@The.goddess.isis_]

I would think they would need hand painted and then a coat of sealant over it all

[@mariom1106]

When applying on concrete walls. Does it have to be smooth? Or can there be slight imperfections on the concert walls?

[@TaitsoTheK1ng]

Is this just resin and hardner or does it have a thinkner in the mix too? Also the metallic sprays are they isopropanol or something else? What would the ratios be and does metallic paint work with your resin?

[@jimshady-yo2vw]

Hey i have question can you apply clear epoxy to tongue and groove walls thanks

[@SupplyHaus1775]

Great question! Yes it can be done so long as it’s prepped correctly please give our office a call for best options 970-639-9338

[@mikecraig5269]

I've been searching for an alternative to wallpaper to do a stand-out wall in a room on our house. This product/technique looks like a game-changer. Enjoyed the presentation.

[@SupplyHaus1775]

Thanks Mike! Let us know if we can help you get that accent wall project started!!

[@carlineneedham778]

can it go on wall that already paint

[@EvolutionFinishes]

You should try venitian plaster

[@suprotimmitra8176]

Can this be done at cemented vertical wall

[@ramondeanda7133]

Que tiempo teda para trabajarlo

[@Gwen.Hopper]

Can your product be used over Durock that is seamed where two pieces meet and at corners with their recommended fiberglass mesh tape and thinset? Would I need to prime or coat all walls first or just apply this over the seamed Durock. My intended use is for shower walls.

[@preston2345]

Did you end up trying it? I would say yes it would work. As for priming it never hurts but honestly epoxy is gnarly stuff

[@juriasee7462]

Hi, how to use efoxy resin on brick wall? Any suggestion? Is that we have to use wooden panel to? I wish i could have a marbled look on my wall

[@mikolmike5920]

Can this cover the joints of the wall?

[@gleitsonlopes1329]

Sensacional, qual a viscosidade da Resina que é aplicada na parede ?

[@Iyangbedivya-pr7rl]

Please where did you get your epoxy resin and hardener from

[@SupplyHaus1775]

Hello we are CountertopEpoxy.com and use all our own products. This is our Non-Sag Epoxy you can find this here: www.countertopepoxy.com/fx-non-sag-epoxy-color-kit/

[@foster2adoption727]

Curious if the 1st layer couldn’t be a tinted wall primer?

[@SupplyHaus1775]

You can tint our wall epoxy with any of our metallic powders call the office if you want to talk about your project more in depth

[@twincanons]

no mention of how its mixed prior to adding hardener,... n is this epoxy resin with Cabosil in it ,,.. ?? Thats an important detail that is left out ,...

[@tashinataylor5934]

How easy is this to fix if we had to get behind the wall for some reason?

[@historinamutloane6471]

can I get a your amount of your product in a ready to use form than having to mix it myself?

[@SupplyHaus1775]

Our epoxy won't come pre mixed as it will cure once part A and part B react when mixed.

[@jenniferscott3176]

I absolutely love that wall is It now water proof I was thinking of taking out my tile bathroom doing hardy board then doing this technique to cover the walls to make them water proof I was thinking I could do a plaster that I saw in Greece that's is water proof itself and is what they make there bathroom walls out of or would it be fine to just do the epoxy itself as the water proof layer I love how u did that wall so much very pretty I also wondered about being able to do a wallpaper with a beach scene then doing clear layer of epoxy over to make it waterproof and be able to have a beach scene shower please let me know what u think is best

[@Robloxbedwars2023]

Can I do this on a damp wall please answer me as I’m stressed out the mould keeps coming back even if I paint it every year

[@SupplyHaus1775]

Prior to using our product we would recommend to take care of any existing issues.

[@Detroitblue]

I like the potential of this product an alternative to tile however, in order to get high end results on a vertical plane seems like a big physical challenge for a untrained workalete. In this case that wall came out a hot mess. Both design color and finish texture would not rate my basement walls. But I want to see more.

[@mjamil933]

thanks for your trailer but I would ask you how longer cure the hardener with higher condensation?

[@kajalbathija4927]

What’s the ration of Gardner n resin

[@jenniferwhite4186]

How much epoxy was used?

[@robertwhite2097]

Would this product be useable on carbon fiber twill and will it dry clear

[@Muddr1nker]

Would this work as a bathroom wall

[@SupplyHaus1775]

Yes! We often create shower wall panels with our non-sag wall epoxy.

[@caniesebastian1426]

What is the brush call

[@danielcolburn2165]

Could I apply this to wood? Trying to do a custom bed headboard

[@GK-zd5fu]

yes, just lay the wood flat on the floor or something and then pour on it

[@hashtagyard6118]

please what was the mixing ratio

[@yolymelez6507]

Ohhhh!!!!❤😱👏👏👏I love your job....👌

[@locaana101]

Can I use this to cover existing tiles? I'm trying to make a drag-queen inspired bathroom (seriously). Also is there any way to get an extra glitter effect? Thanks! (think barbie on acid)

[@SupplyHaus1775]

Yes you can! We would recommend doing a seal coat first to seal in the grout lines between the tiles before going in with the initial pour. For glitter effect, you can actually add the glitter to the epoxy when mixing! :)

[@locaana101]

Thank you very much for the reply! What do you recommend for a seal coat, AND what/how much glitter do you recommend? I don't want to ruin the consistency. Thanks again!

[@wendellotanael5201]

Hi can you just do the base color and make it super even (like mirror/acrylic finish) or is it impossible to do that?

[@CMA418]

Good question...

[@raghavjalan]

Is this epoxy different than the regular self-leveling epoxy. Or this the same self-leveling epoxy with different epoxy and hardener mixing ratio.

[@SupplyHaus1775]

Yes, this is our wall epoxy which is a 2:1 ratio and has a different viscosity than our self-leveling premium fx poxy.

[@annenonneemouse2498]

He didn't ask if it was self leveling, which would be a dumb question bc it's a vertical surface.

[@andrewmarkert1146]

@Aerial Well he did answer his question! He said "YES" to the first question. Then he explained the difference. If it were self leveling, it would fall to the floor and level out genius. How the hell would a wall level? THINK!

[@andrewmarkert1146]

@Aerial Yes he did! You are just too dense to comprehend anything!

[@eoinob]

@Aerial how in the name of God could a material on a vertical wall self level.

[@trinaija]

I would like to do this in my basement but the walls are a bit rough. Do I have to smooth the walls first or can it be done without smoothing it?

[@preston2345]

If you're walls have shallow holes and unevenness you can see with the eye, then you would need to straighten it out first. If you know how to use a trowel or if you're hiring someone, use bmi 290 adhesive cement. Mix it up to a relatively thick consistency, like hair conditioner lol it's an easier product to use than regular sand and cement. I expect you're not a stranger to a trowel or this video wouldn't do much for ya

[@trinaija]

blind thank you!

[@truth7739]

Can this be used as a clear coat over a paper bag wall? Wanting to do the paper bag floor idea on my shower walls and need a way to waterproof with clear coat.

[@SupplyHaus1775]

This would certainly help with waterproofing, yes!

[@popeye1066]

Great finish, what size trowels are you using?

[@SupplyHaus1775]

We typically use 12" pool trowels!

[@karenneillmycreativetable731]

When applying to a wall do you ONLY use the Hardener as it shows in the video or do you still mix it as a 2 part epoxy?

[@SupplyHaus1775]

The hardener and resin will always be combined! It's difficult to tell, but the bucket already has the resin in it (it's white so it blends in on camera).

[@karenneillmycreativetable731]

Thank you!

[@samehagaybi7201]

Yeah it seems more thicker like putting double hardner on resin

[@foxesandfeathers]

what is he spraying at the very end while smoothing it out (not the powder)

[@SupplyHaus1775]

Our powder is mixed with 91% isopropyl alcohol to apply it, but he was using the alcohol on it's own to help lubricate the trowel!

[@yourlocaltourist4703]

vanetian stucco isn't the better bet??

[@SupplyHaus1775]

Yes our wall epoxy is waterproof and much more durable than vanetian

[@Peugot905]

This guy is a monster holy shit

[@lifefamilyfaithfriends7301]

is your wall made of wood or cement?

[@SupplyHaus1775]

This was just applied over drywall!

[@paulbooij7594]

How much did this cost?

[@jdofboise]

If using this product in a shower, are there any additional steps? And if you have a seam where two sheets of plywood or sub come together does the epoxy cover that seam?

[@SupplyHaus1775]

We typically caulk those seams together! Otherwise, if you're using this FX Metallic Wall product, there are actually no additional steps necessary! Although, we would suggest to give one of our installers a shout before you start a project like that so they can make sure you're on the right track! We can be reached at 970-639-9338!

[@jdofboise]

CountertopEpoxy Thanks. I'm assuming any fasteners like drywall screws, nails and such get covered up by the epoxy.

[@SupplyHaus1775]

They do, indeed!

[@junglepunk13]

This Viking has a heavy hand. Looks good though.

[@factfreedom4624]

How did I get down this rabbit hole?😂

[@carolynhague7199]

I've just fallen into it too

[@stephaniebernard9942]

I will taller all my friends and family about dis

[@papatinflores4018]

I'm sorry to say but that was overkill on the gold and they are better methods to make it smoother and look better than that but Kudos looks pretty good

[@FusionSimulations]

Can I see your examples of doing it better?

[@sandipupadhyay7400]

Sandip Upadhyay Radhe Radhe

[@andresmachin9531]

cool technique but somebody needs a color theory course.

[@peterhumphrys6263]

Mi

[@kyleburke7285]

I am so annoyed for this dude small space and what feels like 12 people just watching I can’t stand putting on a show when your making a masterpiece