It'd be cool if you demonstrated some of the stuff you talked about. Like a short demonstration of your stone washing so we get a better idea of how to do it.
@KnathansKnives9 ай бұрын
I'll see what I can do!🙂🤜🤛
@jeffcon123 Жыл бұрын
I’ve got the same setup, mini bugout, flytanium stonewash scales, I just got all silver hardware.. it all goes together pretty well,
@KnathansKnives Жыл бұрын
Nice!🤜🤛
@Rock8664 Жыл бұрын
Very nicely done brother
@KnathansKnives Жыл бұрын
Thank you!
@hildolfrdraugadrottin7279 Жыл бұрын
Looks good to me, better than some factory produced stone washes imo.
@KnathansKnives Жыл бұрын
Thank you very much! 🤜🤛
@MasteringMayhem3 жыл бұрын
Thanks for the tutorial brother! I now know how to etch, we'll see if I actually ever do it. Great video 🙂✌️❤️
@KnathansKnives3 жыл бұрын
No problem brother, I can always do it for you😁😉
@stevegareau1233 жыл бұрын
Great video my friend 👍
@KnathansKnives3 жыл бұрын
Thank you!
@ElysyaBalqis-zp9xk Жыл бұрын
Very nice. Weldone
@KnathansKnives Жыл бұрын
Appreciate it!
@badmunkyedc12 жыл бұрын
Great how to video! You make it look so easy
@KnathansKnives2 жыл бұрын
Appreciate it!
@woofy4353 жыл бұрын
To get it super dark you just need to increase the level of iron in the etchant solution.
@KnathansKnives3 жыл бұрын
Thank you! Appreciate it!🤜💥🤛
@ajohnson64162 жыл бұрын
Where do you get the iron to add to the solution. Total noob here, but I have to try this and want it as dark as possible. Thanks!
@jeremyspaulding77353 жыл бұрын
Awesome how to! Thanks for sharing your process!
@KnathansKnives3 жыл бұрын
Thank you, no problem!🙂
@ILE63672 жыл бұрын
Absolutely wonderful! Very nice job 👍🏻
@KnathansKnives2 жыл бұрын
Thank you! 🤜💥🤛
@rustyknifelover44633 жыл бұрын
Very nice Brother.
@KnathansKnives3 жыл бұрын
🙂🤜💥🤛
@jerseyknifeguy63823 жыл бұрын
You know what I think about it!!!!! I love it ever time you put out a video I want to ship you my Demko for a sick build!!!!
@KnathansKnives3 жыл бұрын
Ha! Soon brother! 😁
@jerseyknifeguy63823 жыл бұрын
@@KnathansKnives hahahahah just tell me to fucking stop asking!!!!! Lol 😆
@KnathansKnives3 жыл бұрын
No worries, when you keep asking, it motivates me😁
@SnaggleToothTactical3 жыл бұрын
Nice job brother...
@KnathansKnives3 жыл бұрын
Thank you! Appreciate it!
@Sharper_Than_Most3 жыл бұрын
Killer video bro!! Love your bugout!
@KnathansKnives3 жыл бұрын
Thank you very much!
@satudave3 жыл бұрын
Awesome video with a ton of great info. Thanks man 👊
@KnathansKnives3 жыл бұрын
Thank you and no problem!😁
@Phiz7873 жыл бұрын
Love all the content. Thank you! Edit: You may want to buy a windsock for your mic. There is a lot of blowout from your audio. Also the loud machines compete with you. Food for thought! Holy crap that looks gorgeous! The orange hardware pops much better now with the darker themes. I like the current colors of the titanium and the blade, but maybe once you've annodised it, I'll like that more! Very impressed with your modding!
@KnathansKnives3 жыл бұрын
Thank you very much! I have a deadcat for my mic but I forgot to put it on(got lazy😕). I think the Anodizing will tie it all together.🙂
@LegionTacticoolCutlery3 жыл бұрын
Wonderful!
@KnathansKnives3 жыл бұрын
🤜💥🤛
@susanjavier20082 жыл бұрын
Thanks for sharing how to etch the blade , just curious on the thumb stud removal , I use two T 6 torx and on each center hole , hold one end and unscrew it but maybe you have your own way of removal , Thanks
@KnathansKnives2 жыл бұрын
No problem🙂 I'll do a video on how I remove the thumbstuds soon😁
@matographiq.D55002 жыл бұрын
Very nice ! After one year, can you say me if this is a strong and resistant custom ?
@KnathansKnives2 жыл бұрын
Thank you! Will do!
@ajohnson64162 жыл бұрын
Great tutorial!! Just one question; when did you remove the nail polish? Before or after the stonewash? Thanks again!!
@KnathansKnives2 жыл бұрын
Appreciate it! The nail polish mostly comes off in the tumbler but I'll clean the nail polish with some lacquer thinner😁
@ajohnson64162 жыл бұрын
@@KnathansKnives Thank you!
@KnathansKnives2 жыл бұрын
No problem 😁
@FriedPi-mc5yt3 жыл бұрын
Have you tried doing a second etch in coffee? That usually will darken the etch.
@KnathansKnives3 жыл бұрын
I haven't yet but I'll definitely try it! Appreciate it!🤜💥🤛😁
@bert25303 жыл бұрын
Did you never had a problem with fingerstains when etching. I mean, you touch the blade with your fingers when you cleaned it. I use surgical gloves as precaution. And did I see in one of your older video’s you added some vinegar to the jar of ferrochloride?
@KnathansKnives3 жыл бұрын
I haven't had any issues yet, but I should probably start wearing gloves🤔 I like to do a ratio of 80% ferric chloride and 20% apple cider vinegar 🙂
@bert25303 жыл бұрын
Thanks for the reply! Will try this vinegar next time!
@AgainstAllOdds3578 күн бұрын
Does this Void BM warranty?
@KnathansKnives7 күн бұрын
More than likely🤔
@TylrVncnt2 жыл бұрын
Does wd40 actually “soak” into metal as if it’s porous..?
@KnathansKnives2 жыл бұрын
It soaks into the etched outer surface.
@nust8235 Жыл бұрын
If I want it darker do I just leave it in longer?
@KnathansKnives Жыл бұрын
The best result I get for a darker wash is after the etching/stonewash, I'll clean the blade really well, sharpen the blade and then let it soak with WD40 over night.🙂
@nust8235 Жыл бұрын
@@KnathansKnives thank you sir. I’ll try it out!
@KnathansKnives Жыл бұрын
@@nust8235 No problem! 🤜🤛
@nust8235 Жыл бұрын
@@KnathansKnives How do you clean it after the wash?
@KnathansKnives Жыл бұрын
I'll wash it with water and then give it a good wipe down with Laquer Thinner.
@TylrVncnt2 жыл бұрын
Does this cause hydrogen embrittlement?
@KnathansKnives2 жыл бұрын
I don't believe it does, from my understanding, etching the steel only causes the surface to change.