How to factory reset a WiFiTron / WiFi-X / WIFI UltraBoost wireless range extender.

[@Otzi444_]

Good morning! I don't understand why i press rest for 6 sec and the power and wi fii led just shut down for 1 sec and then they turn immediatly on and stand like this. no blinking at all

[@MajidAliTalks]

Press long and hold and than you see blinking top of than blinking stop than pull out pin 📍 and than you see it's finished reset process

[@Mojster_Majci]

Hey, I have a problem where when I plug it in. The first 2 lights on top only shine for 2 seconds and then they turn off. Then the 3rd light from the top starts blinking and it doesn’t detect wifi. It worked well before then out of nothing that happened. Do you have any clue what to do? If you have any social media tell me so I can send you the video of it.

[@freename]

I don't have any clue on how to solve problems with these devices. They are generally awful, low quality build and not worth continuing to use. You are better off buying a decent Mesh wifi system rather than these dumb repeaters.

[@sulavkatuwal007]

Bro my repeater has button of reset and tried to reset it many time but its not reseting and it dont host its name and if i try to login with the help of laptop and i put right id pass admin admin it says wrong how to fixx

[@OfficialFATE_CLAN]

I'm having the same problem

[@Tiktok_reiz_fn]

​@@OfficialFATE_CLANme to

[@listen0302]

same problem, did it work at the end?

[@phantomshadow1756]

I'm having the same issue

[@user-eo4eh1lo5s]

thanks bro really appreciate it it worked 💯😊❤

[@freename]

:)

[@plagueneedle8089]

Saved me from buying a new one, I got a new router and couldnt figure out how to reset it, saved me 15 dollars 😂😂

[@insanos638]

thanks bro ❤️

[@gamingtvtrolling9172]

Thank you so much if help for me

[@freename]

Thanks for taking the time to say.

[@harriseze]

Helpful

[@freename]

Thank you for taking the time to let me know :)

[@MajidAliTalks]

Be happy live long good wishes 🎉🎉🎉🎉🎉 it's help full

[@freename]

📯🥳

[@mohamedsekhri986]

I have a WiFi wpa3 enterprise I want to access but I can't configure with that repeater, if it's possible tell me how please

[@freename]

There's not a chance this old and budget repeater supports wpa3 (or wifi6). Give up and sell it / throw it away.

[@jarvisplayz1112]

My question is not about reseting the repeater, my question is my device cant detect the repeater can u help?

[@freename]

Do other devices see/detect it?

[@philipskor6291]

If it says you can't find IP address, plug off all your repeaters and let them rest for about 5 minutes. Plug them back in and you should be able to connect.

[@Freshmemesig]

it doesn’t show up anymore after i reset it 😢

[@lisahunt3963]

Only the power light is on for me

[@orlandobonilla4125]

It didn't blink for me and I have the same wifi repeater and I upgrade the software and now when I try to go in the settings it kicks me out ??

[@freename]

Not sure, sorry :(

[@orlandobonilla4125]

@icannotgetafreename oh ok thanks

[@hadiaadil1032]

How to stop it from flashing

[@ednanayub]

Does it have an admin panel for setting

[@freename]

Yes, it's shown in this video kzbin.info/www/bejne/fHK5p6WDbtyIl6M

[@patricklao515]

Doesnt work for me

[@freename]

:( sorry, not sure what other advice I can give.

[@eltonpereira875]

It happened to me, then I pressed very hard and it worked

[@fft2036]

Does the LAN cabell need to be conected with ur pc?

[@freename]

That would give you the best performance to your PC as it will mean the WiFi booster won't be using two time slots to retransmit wirelessly to your computer

[@RoughWalkers]

Is there a way to set it up using the wifi password and not the WPS

[@freename]

kzbin.info/www/bejne/fHK5p6WDbtyIl6M That might show you the manual setup where you select a wifi name and type in a password.

[@Traveling-with-Maria-R]

Tried this but that did not work. Power light is the only thing that is lite up and does not start to blink. Think I got a bad one.

[@freename]

They are all bad in a lot of ways but it does seem like you've received a broken one.

[@FrancescoCaudulloSV]

the WPS button in ON , but non the power LED. And it does not reset. WTF

[@freename]

Sounds like it has failed, which isn't particularly surprising given the quality of the devices.

[@aslammohammed2051]

Ha I had update firmware wrongly in this device is there any way to restore

[@freename]

No, not sure. Sorry :(

[@kevinlavender4093]

I have got one of these and I have got the same

[@tigertruckerman]

I can't get this to connect to my phone,can you make a video?

[@freename]

I don't have the wifitron any more, sorry.

[@kkkkkkkkk64446]

How to find website to find his firmware update

[@freename]

That's a great joke! You made me laugh. (There's next to no chance a firmware update has been produced or can be downloaded).

[@kkkkkkkkk64446]

When i enter to settings i see the upgrade section but as a file and I don't know where to find it ​@@freename

[@freename]

@kheyarkhelaf1996 that's what I mean. this device is cheaply made and sold under many brand names, none have official support websites to download the firmware.

[@kkkkkkkkk64446]

@@freename you're right bro

[@MervinMcChengelrayen-qc6ud]

Why the first 2 lights r on

[@MervinMcChengelrayen-qc6ud]

It does not want to reset

[@freename]

If you've followed what I do in my video with a small enough paperclip, and the lights don't do the same thing they do in my video then your wiFitron has probably just gone wrong. They are cheap and awful devices so it doesn't really surprise me. I recommend getting more costly but better WiFi Mesh stuff (TP-Link Deco, Netgear Orbi etc.)

[@musicislife1837]

How reset and set password again

[@freename]

This is the process. You factory reset it and then connect to it's open wifi. Some of the remaining setup should be covered in this video: kzbin.info/www/bejne/fHK5p6WDbtyIl6M

[@musicislife1837]

@@freename thank you, it helps me a lot

[@lazypig939]

So how do you reset the password afterwards please 🥺..?

[@freename]

Once factory reset it doesn't have a password! See the initial setup video: kzbin.info/www/bejne/fHK5p6WDbtyIl6M