How to Find and Fix Problems with Air Ride | The Bottom Line

[@zososldier]

I never had leak issues. My biggest problem was always compressor seals going bad and valves freezing in the winter. Switched to an engine driven compressor and added air brake anti freeze in the winter.

[@ChrisLuke-uz7hz]

I have an odd problem. Sometimes my electric valves won't work until the compressor is finished filling the tank. The front won't release air pressure. Valves start to work after the tank fills. Bad valves?

[@mauriciomartinez2631]

Found this video really informative thank you 🙏

[@Sgt_vlz]

Mine has been building air when I air out. As soon as I air out the numbers go down and the rear passenger starts to build air back up. I think it might be a bad check valve not sure though.

[@paulscaraudioandmore1363]

I feel you brother I need that new set up

[@williamaponte217]

Have you ever had an uneven lifting?

[@cerwin21]

Welp. Guessing my issue is the thread lock used I will get some Loctite 565. Cant find the leak in my system. Firestone 5323 bags on a Kelderman setup on Excursion. Air completely leaks down over 3 days. No bubbles seen. Was thinking it might be miss matched threads on fittings.

[@dontrompas1312]

Any bump steer

[@randydahl3646]

Was wondering if you could answer a question for me, when I air up my front or rear bags I get a burst of air out of the dump valve is that normal? If not what would be the issue? Thank you

[@jr.ramirez5798]

When I air up front and back my passanger side always goes higher it drives me crazy I always have to give it a few taps front driver and rear driver bag

[@MACNTOSFAM]

are you from the bay area? i just saw the oakland port? i’m having some air ride issues now. it’s my first car with an airlift system. a 2007 lexus 460

[@edmuraski3771]

I have gages that show front and back suspension. I am able to level the truck but the gages for the front now both show the position at the maximum heights which they are not at. Is that gage malfunctioning? How do I get it to register the correct height?

[@jaws12341000]

66 caprice heard loud pop then hissing and bags deflated but cant find any holes in air bags what could be wrong

[@jeremyledbury6426]

I have a huge wiring mess with mine that I can't figure out I know it's on the power side but I'm lost wish you guys could help

[@brentmcmahon8188]

You have to use a bump stop in your air bags. I’ve haulded cars for GM all my life and that’s what the did to all our tractors and trailers o you would not get stuck out in the middle of no we’re !

[@dentman62]

😂😂😂 bro said bump stops 😂😂😂😂 fuc that's funny

[@invisalinkaccounts2740]

What kinda of 4 link (or whatever it is) and Bridge setup is on Tony's 64' D100???

[@shauncarter82]

I have had my lexus bagged and got stranded on day two. very sad time.

[@tdwz1652]

my truck was a never ending routine of chasing leaks lol

[@michaelpashan21]

my 2 front bags are all the way up and wont go down, any ideas??

[@ChrisLuke-uz7hz]

Same here. Any fix?

[@theonlytkt3567]

i have a question nobody has asked yet and pretty important. i had bought a car that had airbag suspension and a sub installed. i was bumpin sounds and then all of a sudden both the compressor and sub kicked off. i wasn't able to get more air in the suspension than was already there, so my car is stuck sitting right now. i know it has to be an electrical problem, but i have no idea how to fix it. please respond asap!

[@jeremiahnicholas9471]

Have you been responded to? In the 4 months this app says lol. Have a counter question for your comment.

[@rwhutcheson]

I tired to 3 wheel a KP 6 link one time and broke the bridge in half on the rear end..😂😂😂

[@lewinbn]

Did going from half in to 3/8 slow your bags?

[@jr.ramirez5798]

I’m sure it will prolly will give u better control to go up and down not so fast

[@zososldier]

It does. I had 1/2 on my s10 and it would almost jump off the ground. 3/8 is still fairly quick just not that fast.

[@calimatt24traxxas]

That it's a headache and a half.

[@youtubedev0]

Valve manifolds are a downgrade. I was genuinely upset you wasted so much money and removed the brass valves. That manifold is going to rust too. I would never recommend any valve manifold.

[@pawpatina]

so many "UHH"s

[@bb38313]

Only a fool would own a mud dragger with air ride. Lowered trucks and cars are for losers!