How To Fit Hot Racing 17MM Hex Adapters ARRMA Granite 4x4 4S BLX

[@DriftomaniacsRC]

Get Your Very Own Arrma Granite Right here - bit.ly/2xqb840 Get the 6ch Radio Transmitter & Receiver We Now Use Here - www.banggood.com/custlink/mD33VJz8zU It's got a built in Gyro, ABS Braking, and a 500M Range For Under $30!

[@whome5810]

Great vid! With the hot racing adapters and the Badlands is it wider than when it had the original stock wheels? Thanks! :)

[@spadds]

Just what I needed to make sure no other parts were required for my senton! Thanks for the vid!

[@biggnasty989]

Your knowledge of hot racing hex adapters is greatly appreciated. Keep up the good work and continue to push the boundaries of what's possible in the world of RCs.

[@whome5810]

Great vid! With the hot racing adapters and the Badlands is it wider than when it had the original stock wheels? Thanks! :)

[@edwincordero8]

Do these fit Arrma TYPHON 3s BLX?

[@SargentSkroonk]

Great recommendation to threadlock the hex screws in the adaptor. 👍 I've had 2 wheels come off and lost bearings and hex pins.

[@robbryan3044]

Thanks for the video. While I don't need them on the Rustler 4x4 I'm currently turning into a true "stadium truck" (although I am installing 15mm hub extenders), I will be needing to install them on the Rustler 4x4 I'll be converting into a 1/8 buggy. BTW, the Loctite suggestion is a VERY smart move...I'll have to remember it.

[@omairkhan6104]

Hi. Thanks for the video. Its quite helpful. I just wanted to know can i put these 17mm hex on my new arrma granite 4x4 blx with the stock wheels?

[@joeyfesta2042]

I need your opinion,,I upgraded to the HR 17mm extensions..What wheel & street tire do you recommend that will fit best on the Big Rock ???

[@DriftomaniacsRC]

Power hobbly belted tires without a doubt!

[@Rgt86100]

Wo gibt es solche Adapter? Wo kann ich kaufen? Name?

[@aguirrediego2]

Will these work with the maxx ?

[@CmwSpeedrunUk]

This helped me upgrade my arrma typhon3s to run belted tyres 💪🏽

[@FLSharkdiver]

Richie, Do you know what hot racing Aluminum Heavy Duty 17mm Hex Hubs 12mm Offset Arrma 1/10 4x4 will fit on my 3s Typhon?

[@DriftomaniacsRC]

No however I'd look on aliexpress as they have a huge range of 17mm adapters (I was looking yesterday!)

[@jaybeetube3333]

The 3S BLX Typhon comes with 17mm hexes. Not sure about the brushed one.

[@NepDouble07]

Are these serrated like the stock 6s wheel nuts?

[@DriftomaniacsRC]

I think so! About 90% sure

[@afterrunrc9935]

Richie, how have these adapters been? I'm gonna need new wheels soon and I am considering buying these for more wheel options

[@fgarcia2277]

Nice video! Don't need these but I was curious how they worked. Always nice to see how companies do things. They look nice and solid. Generally like hot racing stuff

[@islandrc-duke1972]

great upgrade and info,can't wait to see the speed runs,thanks Richie

[@josephnubile1970]

Hello do they lossen up after every outing. I have the traxxas adaptors on my senton 3s and after every outing atleast one is wobbling and i used blue loctite.

[@imserious2187]

Those will fit on any vehicle with 17mm hex?

[@oscar_rc_basher7038]

Will thes fit the traxxas 1/10 cars

[@jamiefehr2180]

No

[@miscellaneous_scapes8406]

Hey Richi.. im a noob trying to work out which badlands pt# i need to use.. you are showing PT# 10125-10... whereas another channel is showing PT# 10125-18.. is there a difference or will both Work? Cheers mate

[@43rocket]

wish they make 5mm offset hubs for typhon 3s 10mm to long to bulky, my grp rim hit the front sterring buckles.

[@smo98765]

Will these fit the kraton 6s?

[@209rc7]

Will this fir on wltoys 144001?

[@DriftomaniacsRC]

no!

[@miketube6662]

Get mine next week ive been waiting 5 weeks as there coming from usa 🇺🇸 bang a set of prolines 2.8 smashed ittt 😂

[@poorboytrucking1]

What is the part number for the adapters?

[@RcDady]

Thank you ❤

[@757monster]

I bought these 17mm hex extensions for my Granite BLX V3 and the little hex nut that holds it on the axle is to large and slips right over the threads and doesnt get tight. Am I doing something wrong?

[@RUZTY1311]

You bought the wrong ones. I did the same thing and bought the 4s ones. These ones are out of stock.

[@SteveRich313]

Will these fit straight on a typhon 3s blx please

[@DriftomaniacsRC]

Steven I think they should but I'm 90% certain not 100%

[@SteveRich313]

Thank you I'll order them and see how long does delivery to the UK normally take?

[@jesseormond3202]

Hey I keep snapping axels on my stock setup with the adaptors. Any upgrade suggestions. Im running a mega converted with a hobbywing max10 combo just on 2s. Help Rich Help!

[@DriftomaniacsRC]

These are what I have fitted and what you need BUT they're not cheap! Hot Racing ATF288RC High Performance Cv Splined Driveshafts

[@jesseormond3202]

Thank You Rich!

[@leonardwheeler4789]

Brilliant video !! Very impressed, I want to copy your great method. Please can you help me as to where I can purchase this adaptor ? Keep up the good work ? Thankyou.

[@DriftomaniacsRC]

I got mine from JJ Customs down in San Jose

[@tenncutt]

Ebay

[@DTWC]

Thank ypu so much be nice if kits had directions

[@kennethcraft6563]

Cool I need this

[@stevemdelacruz5602]

Red or blue locktite

[@tenncutt]

Blue brother, red is permanent. Can be removed with heat though

[@The8429]

Thanks Richie Boy

[@meditationheathandwellness781]

Nice

[@joeyfesta2042]

They do not fit my 3s big rock.Very disappointed

[@DriftomaniacsRC]

sorry to hear that, that's odd as if they fit the granite then you'd assume they'd fit the big rock

[@bluntmediatv5582]

Driftomaniacs I noticed the same. That’s because our big Rock has 14mm hex

[@Brian-xi3kz]

Yes they fit

[@DTWC]

They fit my big rock, no problem at all.

[@DTWC]

Lol take the 14s off first