Wow, i have an old 2005 mondeo, amazing that the seal is not broken yet, so glad i found out i can use roof bars on my car!
@julianweeks32610 жыл бұрын
great vido thanks, thought i had the wrong bars because i didnt realize i had to remove the sealant. big thumbs up ........
@lawrieedwards4338Ай бұрын
Thanks, good video, I had no idea how the roof racks fitted to a Mondeo, thanks KZbin for the instructions
@jennyc54223 жыл бұрын
I had to turn the sound off as the music distracted and made it hard to hear the speaking. Luckily it didn't need the sound.
@rocco37ful29 күн бұрын
donde se puede comprar esas barras de techo para mi vehiculo tengo el mismo modelo
@astrambc5 жыл бұрын
Where can I get the replacement roof trim?
@dikeyonlineАй бұрын
why did they cut away at probably the bit most people would want help with, the removal of the sealant, and just show us the fitters face.
@Scott2Bgood4u3 жыл бұрын
This kit seems to no longer be available. Does anyone know where to source a new one?
@swollenbellend12 жыл бұрын
Great job but why ford put sealant in there in the first place is beyond me as this can be quite dournting digging out the roof of your brand new car like i had to with a screwdriver anyway thanks for your video hope helps others and save going to halfords to be ripped off with there charges for fitting
@ML61033 жыл бұрын
I just thought I’d chime in 8 years later and mentioned what a swollen bellend you are for not knowing how to spell daunting.
@erickuhn10423 жыл бұрын
@@ML6103 Hahaha 8 years later... never too late to correct spelling.
@dougprentice13635 жыл бұрын
Do you leave the rack on the car all the time? Or put it on and take off as needed?
@sterling14710 жыл бұрын
Many thanks Ford Online Parts for this video. The roof bars for my S Max with panoramic sunroof have just arrived only 24 hours after ordering. Fantastic service. I have not fitted this type of roof bars on a vehicle before, so this video is a great relief.
@jaimemacias21394 жыл бұрын
Does this apply to US spec C-Max’s? I don’t seem able to find the removable cap piece on my trim.
@aloissuter10714 жыл бұрын
I have the same question?
@Network1262 жыл бұрын
I have a US spec Focus and it doesn't have these removable caps. It's just one long solid piece. I can remove it but there's no mounting holes.
@biancawebster4146 Жыл бұрын
Is it ok to make my own hole with the caps that come with the car? Because I have no idea where to get them from. I think this is such a bad design. It should be a lot easier than this, does anyone else agree? I bought the roof rack bar's from someone, when I got home to fit them on. I thought I had bought the wrong bars or something, until I watched this video. And I just couldn't believe the work and destruction you have to do to your car to install the roof rack, I mean wtf? Come on seriously!! Remove the caps which come with the car, then slice and cut away a silicone sealant under the caps, to get to screwed/pushed in plug, without breaking the top off so be careful removing that. But what gets me that you have to also have 4 replacement caps too lol which comes with pre hole holes in them, so your screw or bolt can fit through it, to fix the bar brackets over the top of it 😞 which I had no clue that you needed. Did anyone else know this or did anyone have the same problem as me, when they found this out when you watched this video too? I guess I could easily make a hole for my screw to fit through, but then if I ever decide to remove my roof rack and take it off, well I will be left with 4 holes in the caps which I made lol decisions? Do I make these holes now myself, as I need to use the roof rack ASAP. Or do I order these pre hole caps and wait. Could someone tell me where I can buy these caps from and how much are they please? Thanks. This is seriously a poor design in my eyes. It should be so much simpler than this in this day of age
@terencemahon74844 жыл бұрын
Ware do I get the roof trim with the holes in from then?
@supabry264 жыл бұрын
Ford. Obviously.
@highgreen64529 ай бұрын
Close your eyes Sean Bean does roof bars 😂😂😂
@chrismalberg48837 жыл бұрын
Does anyone know the specs on the bolts my dealer does not supply
@iphyzoR11 жыл бұрын
with my car went to unscrew with the screw driver and it totally ruined the thread so frustrated atm
@sarahalexander48423 жыл бұрын
What size / length do I need? I have the same car.
@lespownall82212 жыл бұрын
Can anyone tell if the lo ger screw is front or back please?
@MoodSwingZX3 жыл бұрын
Does the same fit kombi with the same mounting?
@JayG942 жыл бұрын
Does this work with mk7 ford fiesta 3 door?
@JourneywithSmee5 жыл бұрын
He went to same school as me and Andrew (Freddie) Flintoff.
@Brett127910 жыл бұрын
Hello, Do you know if the roof bar bolts (Yellow Retaining Screws) are available to purchase. My ones have rusted? Many thanks
@chrismalberg48837 жыл бұрын
Any luck do you know the specs for these bolts so I can source from a hardware shop and modify
@mosis1339 жыл бұрын
Can someone help? My 2005 zetec s fiesta doesn't have removable roof trim, it's just one continuous section of rubber... what do I do?
@mosis1339 жыл бұрын
liamshawmma Yeah... you have to buy a roof rack kit from a ford dealer and it will come with new ones that you replace yourself :)
@andyb30698 жыл бұрын
Mo Samuels what did ford charge for kit ?
@mitchconnor68055 жыл бұрын
Mo Samuels? Haha funny running into you here. I used to watch your transformation video for motivation in the gym getting those testosterone gains.
@rogase6810 жыл бұрын
Stupid system I stuffed the plastic screws and can't get them out
@sandradunne52397 жыл бұрын
rogase68 how did you get them out.? just did the same
@rogase687 жыл бұрын
Sandra Dunne I ended up taking it to the mechanic who got it out for me. I gave up👎
@sandradunne52397 жыл бұрын
rogase68 thanks, they are a curse to get out, thanks for reply
@rogase687 жыл бұрын
Sandra Dunne no worries good luck
@jimperium773 жыл бұрын
same system on ford CMAX 2008 ?
@Network1262 жыл бұрын
I have a US spec Focus and it doesn't have these removable caps. It's just one long solid piece. I can remove it but there's no mounting holes.
@joarannstrom6 жыл бұрын
What kind of Bolt is used as on my an normal m6 doesn't fit
@lolq111116 ай бұрын
Have u find out answer?
@jameshaury271610 ай бұрын
Why in heaverns name didthey ever do it that way! It is a PITA and totally unnecessary.
@emergaa4 жыл бұрын
Hello is that roof bars will work on ford focus cmax diesel 2003 - 2010? Thanks
@supabry264 жыл бұрын
No only the petrol, the diesel has wider roofbars as the tardation factor is tripled
@biancawebster4146 Жыл бұрын
Such a poor design this is. So if you are going to buy a roof rack for your ford focus people, i warn you now, that there is a lot of work you have to do to your car first before you can even think about fitting your roof rack to your car. My advice i would take the time to watch this video or one similar to it, because you might get confused and think you have brought the wrong roof rack. And you definitely need a sharp knife for this poor design. For the ridiculous silicone sealant you will have to slice and cut away. Then be very careful removing the screw in plugs you need to pull out under the sealant. Then keep them safe somewhere i suppose. But the most important tip i will give you is, if you are buying a roof rack for your ford focus, make sure you also buy the replacement caps which are pre holed okay 👍 otherwise you will be in a predicament as well haha
@csabacsorba5454 Жыл бұрын
for wich ford fit this shit?
@guyrichardjohnson10 жыл бұрын
My Mondeo '51' Reg has different fittings. So no help whatsoever
@guyrichardjohnson10 жыл бұрын
OK, I take it back. It was the body coloured filler that had me fooled.
@zholy99 жыл бұрын
Guy Johnson Same with me :) ... it looked like the hole was filled with melted/welded metal :)
@ChrisTomo505 жыл бұрын
If only those screws came out as easily as in this video. Like other people in this video the screw dissintigrates when u try and unscrew . 2x roof rack purchases later and I'm fuming. What a waste of time and money. If I'd have known how difficult it was to fit I'd have never bought the car. Not the best design.