How to fix a blue ray player

[@heartofworshipgeneration]

Thank you very much brother, I've fixed my Pioneer Blu-ray player because of your video today. God bless!!! SHALOM!!!!

[@THEMANCAVE2023]

Hello, your very welcome friend I'm glad it helped you out and I hope it saved you some cash. Thank you very much for watching and taking your time to comment I truly appreciate it Please like share subscribe

[@graciewajda]

First step fixed my problem. Thank you so much! I had a stuck library rental dvd.

[@THEMANCAVE2023]

Your most welcome glad it helped

[@karlholberry7973]

Legend I didn't know about the little wheel underneath. My problem is sorted. Thank you!

[@THEMANCAVE2023]

Happy to help

[@canamrider7195]

Nice job. Amazing what a simple inspection can find, rather then adding it to the land fill immediately upon having any problems. I have a year old Samsung that is going south, and I will be taking it apart soon and if nothing else at least cleaning it with compressed air. My pug mix sheds about her weight on a yearly basis. There could be a few pounds of dog hair in there.

[@THEMANCAVE2023]

Hey bill, Lol.i unserdatnd the dog hair. Check it out most times its something that can be fixed. Good luck with your teardown. Thanks for watching and taking the time to comment in really appreciate it Please consider subscribing if you have not it's a big help Thanks again

[@michaelfeeney8437]

Would like to have seen you clean the laser while you had the cover off. Similar to a Panasonic with awkward access.But that was a good fix and thanks for posting.

[@THEMANCAVE2023]

No thank you for watching and taking your time to comment appreciate it

[@averyrob1]

Great info! Thank you for the “How to”. I have a Samsung BD E5900 that won’t play regular DVDs but it will play Blu-ray’s. I’ve tried multiple DVD discs and it spins and stays on “loading” for a minute or so then spits the disc out and says I should clean the disc etc. when I put Blu-ray in I have no issues. It started doing this about a week ago. Any help would be greatly appreciated. Thanks.

[@THEMANCAVE2023]

Hey robert, So I have seen this happen for a few reasons. 1st, of the dvd is a copied or burnt it could cause this, does not sound like your issue but its one reason. 2. The DVD is not labeled for sale or use in the region your living in. They are electronicly coded to prevent fraud 3 has to do with the reason above the internal cpu of the player or control pwb went bad ( not worth fixing ) 4 you lens is actually dirty or has something on it. Dvd uses a different wavelength (frequency) of laser to play the disk its possibly. The frequency need is blocked by dust and not allowing it to read dvd disk but the blue ray frequency still mY pass through the dirt on lens Hope.it helps a little have a wonderful day let me know Thanks for watching and taking your time to comment I truly appreciate it and you Please like share subscribe its a huge help to the channel Thanks again

[@averyrob1]

@@THEMANCAVE2023 Some of DVDs are burnt but I've been playing them for some years now so don't its 1 or 2. I can play them fine in my desktop computer DVD but I realize every player may be different. I did clean the lens of the player but it still wouldn't read any DVDs to include the ones I've purchased and not burned myself. it so the answer may be behind door #3 ^_^ .

[@pinnacleservices6671]

How do you replace the power fuse? I have the same player with no power

[@manishchandra7081]

Hi Jimmy, Thanks for the informative video first. I have an OPPO 203 UDP, about 2 and 1/2 years old. Each time I press the close button, while the tray slides in,it makes a squeaky,whistling sound . It seems to be coming from the center of the BDP, something rotating. It would be great if you let me know how to fix this annoying noise. Thanks again and have a great day.

[@THEMANCAVE2023]

There is a a motor and basically a o-ring / belt that goes around pulley that opens closes tray. Check the belt they wear after time , also check the motor and pully. I've used rubber bands before to replace them if need be or o-rings

[@johnobrien7134]

I HAVE A PANASONIC DMR BWT 800 RECORDER IT STARTED LOOSING PICTURE AND MAKING LOUD SCRATCHY TYPE NOISES WITH THE SCREEN ON THE TV LOOKING LIKE IT IS OUT OF TUNE LOTS OF DOTS AND NOISY . I TUNED IT OFF LEFT IT FOR A WHILE IT THEN STARTED WORKING CORRECTLY FOR A DAY THEN STARTED THE SAME STUFF ALL OVER AGAIN ..NOW ALL I GET IS A BLANK SCREEN WITH THE WORDS NO SIGNAL !!1 I TRIED IT ON ANOTHER TV WITH DIFFERENT HDMI CABLES ETC TO MAKE SURE IT WAS THE PLAYER WITH SAME RESULTS ... NO SIGNAL .. THERE IS NO OBVIOUS BURNT CAPS ON THE BOARD THAT I CAN SEE ... THERE IS ONLY ONE HDMI PORT COMING OUT OF THE RECORDER SO CAN'T TRY A DIFFERENT PORT WHAT DO YOU SUGGEST ! PLEASE

[@THEMANCAVE2023]

If loud noises occur it is mechanical. So I would check all mechanical movment. A lot of players ect use same parts may find one from used unit

[@zlorgeblub]

I have a Samsung BD-E5500 (like yours) - It starts up, loads the Samsung image and then no more images ... The panel displays "Load". How can I reinstall the firmware without having access to the menu in visual ... I tested the Samsung procedure without success (play button pressed) - Disk ISO ? But is ther a autorun ?? Thank you

[@THEMANCAVE2023]

Would have to flash via USB-emc flash but I have no idea were you would find the firmware as that model is 5 + years old Thanks for watching and taking your time to comment I truly appreciate it and you Please like share subscribe its a huge help to the channel Thanks again for your support

[@fabiolamillan7600]

what blu ray player did you have in the beginning of the video?

[@THEMANCAVE2023]

It was a samsung bluray disk player

[@robertng6474]

i got a Panasonic blue ray and the remote is good, but the player not responsive to the remote? you know how to fix it?

[@THEMANCAVE2023]

Hey Robert, If the blue ray does not respond, how do you know.the remote is good ? (Just asking for information purposes) If you are certain the remote is good open it up and check the soldering on the PCb board (printed circuit board) make sure it's not cracked or loose. That's were I would start past that point you would need fairly decent multi meter and knowlge to test mossfets on the board.

[@robertng6474]

@@THEMANCAVE2023 see the red light when you turn off the light

[@robertng6474]

The remote emitt light at the front of remote

[@gekkogordon]

Yours is region A like mine, do you know how to change it region-free besides changing the board? There must be a way with a firmware!!! The thing with remote control code does not work to me. Mine is 5700/ZC

[@DJClassicRecords]

Hello Model bluray samsung ?

[@MattBruns]

Blu Rays are thicker than DVDs so even if you do scratch it, it won't affect the playback.

[@THEMANCAVE2023]

Thanks for sharing

[@saarike]

With how many volts that motor works? Nice vid by the way.

[@olseniri9442]

Hi. Can you help me ? I have lg blu ray (home cinema ) When I turn it on there are two word" please wait " and nothing happening I have wait about 3 hours nothing happend

[@THEMANCAVE2023]

Do you have a dvd/blueray disk installed when you power it on ? If yes take it out and unplug unit foe 30 seconds and try again. Also unplugg unit from wall and take a screwdriver and touch it across the screen terminals ( this discharges any capacitors energy ) that could be holding memory on cpu. Unplug and check all capacitors inside unit. They leak/swell /puff when bad. Replace if so. Also verify the disk your playing is coded to play in your region, disks are coded such to only play in regions they were distributed in Thats were I would start. Thanks for watching and leaving a commet I appreciate it please like share subscribe thanks

[@marvinmoonrock5327]

You waiting one hour tooooo long, just saying

[@captainwafflemcnubbin45]

Hey I have a blue ray player that plays everything but blue rays. What cab I do?

[@THEMANCAVE2023]

How old is the player ? If it's several years old the HD hdcp handshake probably will not work with the modern version. But if it's new the only thing that will not play if the blu-ray disk is from another region

[@captainwafflemcnubbin45]

@@THEMANCAVE2023 it's first generation...I had for a very long time

[@THEMANCAVE2023]

To be honest they use a technology called hdpc handshake, this allows the blue ray player and the disk to communicate and the player to talk to the TV via hdmi. I would almost bet that you will need to upgrade your bluray player to a newer model to conform with the newest standard. You could always see if there is a firmware update for your player as well

[@captainwafflemcnubbin45]

@@THEMANCAVE2023 Thanks for the help

[@smasher8543]

My remote control sensor not working can you show me how to repair it

[@THEMANCAVE2023]

Not repairable

[@shenri]

My Toshiba region B blu ray works but it is laggy.. any idea why?

[@THEMANCAVE2023]

When you say laggy what do you mean ?? Picture / menu ??

[@ryanbaxter1585]

My Samsung blue ray player turns on and a second or 2 later turns off, on for a few seconds, off in a constant cycle. Any ideas?

[@THEMANCAVE2023]

Generally when they turn on and then off its one of two things. Bad capacitor (can be fixed just replaced capacitor) or just a bad pcb (printed circuit board) not worth repairing. Unless you find a used model for 10-15 bucks (ebay) Thanks for watching and taking your time to comment I truly appreciate it and you Please like share subscribe its a huge help to the channel Thanks again

[@heff3582]

Ryan, my Samsung just started doing this today. The screen will flash on for a second then turn off. It’s stuck in an endless cycle. Model # is bd-j5100. Let me know if you figure out a fix!!

[@robmodic357]

@@heff3582 Andrew, I have the same Model bd-j1500 and the screen started flashing on for a few seconds, then off, on June 20. We did not use it on June 19. I wonder if it is a programing err.

[@justonceinawhile]

Same problem Ryan and Andrew and Rob (misery and company), in the same time frame, just the last week. I woke up one morning to Samsung BD-J5700 cycling on an off, moving the drive momentarily so that I could hear it. Tried all the online solutions about hard resets, opened it up and disconnected the drive - no difference. Thank you Man Cave for the tip on capacitors but they all look good too. I did a chat with Samsung support and they said it sounded like a software issue that would be repaired soon and I should cycle it on and off every day checking for that fix. I have no faith in this solution since it isn't on long enough to check for an update, but thought I would share what I learned.

[@robmodic357]

@@justonceinawhile Thanks for sharing. I, too, checked the capacitors and they look fine. I can't see how the machine would connect long enough to download a software fix.

[@gottisttot9]

Hi i have a Philips and not power On, i see the fuse and is ok, how i can repair?

[@THEMANCAVE2023]

Did you check the fuse with a meter or just visual? Also you would need to use a multi meter and test the power supply (if you know how to do so safely) If the power supply is getting power to the pcb (printed circuit board) then check for any swollen capacitor (swollen is broken) if none of that checks out it’s probably bad mossfet and it would be easier to buy new unit Thanks for watching !

[@gottisttot9]

@@THEMANCAVE2023 fuse work, I want try use multimeter for found broken pieces with safety, can you help me? I don't see capacitor broken

[@joyceannlechner6395]

Useful information! Thank you!

[@THEMANCAVE2023]

Your welcome thanks for watching and taking your time to comment I appreciate it

[@wpg7083]

My blue ray player doesn’t work. It can’t connect to WiFi and won’t read the disks. We were watching legend of kora then it stopped working. But it works only if we use a different disk. Help please

[@THEMANCAVE2023]

Sounds like the disk is non labeled for your region. The disk and player and hdmi port all created a digital handshake to communicate with one another and to help fight pirated movies. If this fails it will render player unusable until the disk is removed. If the disk is a legal owned copy and this happens it could be a issue with the pcb board Thanks for watching and taking your time to comment I truly appreciate it and you Please like share subscribe its a huge help to the channel Thanks again

[@brandimatthews3128]

Mine is saying protection then powering off. Help please

[@THEMANCAVE2023]

Brandi whats up girl hope all is well ! Generally when they say protection and power off one of 2nthings is happening. The disk being played is not allowed to be played in the region your in ( there coded to regions) and or the handshake between the player and the TV is not successful ( this is an protocol to prevent unauthorized playback of disks that are not genuine) ( the disk hdmi cable and TV talk to one another essentially) Let me know if you need anything else have a great evening !

[@brandimatthews3128]

@@THEMANCAVE2023 thank you so much for your reply

[@THEMANCAVE2023]

Your most welcome !

[@aidan11obrien83]

This is awesome it totally worked

[@THEMANCAVE2023]

Glad itnhelped you out , please like share and subscribe its a huge help to the channel Thanks again for your support

[@Obekanobee]

Thank you!

[@THEMANCAVE2023]

Welcome

[@danielmorales-lj8nq]

mine doesn't power on...suggestion please

[@danw1207]

Go to 5:37 and listen :)

[@THEMANCAVE2023]

Check power supply & capacitors if you know how

[@jturquoise]

Lol I thought he wasn’t trying to scratch the disc. He just threw it in the player and then threw it on a hard surface . Lol

[@coydog7902]

Mine won’t play discs

[@THEMANCAVE2023]

Not a ton to go on there

[@coydog7902]

It gives me “CANNOT OPERATE” I opened mine up and I can figure out how to open the Blue ray drive

[@THEMANCAVE2023]

Is the motor spinning ?

[@coydog7902]

Yes

[@THEMANCAVE2023]

I would verify that the disk is a assigned to the region you live in otherwise it will not play and will not operate as it will not communicate a proper handshake between be this Blu-Ray in the TV

[@daviddelatorreperez4]

Blu-ray !!!