How To Fix A Briggs Or Tecumseh Lawn Mower That Leaks Gas From The Carburetor

Is your carburetor leaking or pouring fuel out of your carburetor on the air filter side or does it flood into your engine oil making the oil smell like gasoline? No matter what side it’s leaking from, it’s the same repair. Watch now to see how to easily stop your lawn mower carb from leaking fuel.
This applies to almost all 4 stroke 4 cycle engines, with the float bowl on the bottom, on snow blowers, riding lawn mowers, walk behind lawn mowers, water pumps, generators, general purpose engines, etc.
This video ONLY deals with Briggs and Stratton or Tecumseh carburetors.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG
✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr
✅Click here for a new float ➜ amzn.to/33mAABy
For more videos like this, check out:
👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ • Straighten A Bent Lawn...
👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ • Fastest Way To Tell If...
👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ • Here's Why Your Lawn M...
👉How To Adjust the RPM Speed on a Lawn Mower ➜ • How To Adjust the RPM ...
🔧WELCOME to the Steve’s Small Engine Saloon KZbin channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #troubleshooting #engine #lawnandgarden #lawnmower #lawnmowerrepair #mowerrepair #carburetor #carbreakdown #mower #Tecumseh #briggsandstratton

[@StevesSmallEngineSaloon]

✅Click here for a Briggs repair kit ➜ amzn.to/2XH3DhG ✅Click here for a Tecumseh repair kit ➜ amzn.to/2DdxIfr ✅Click here for a new float ➜ amzn.to/33mAABy For more videos like this, check out: 👉Straighten A Bent Lawn Mower Crankshaft With A Pipe ➜ kzbin.info/www/bejne/rWO1oGx9oqqshac 👉Fastest Way To Tell If The Crankshaft Is Bent On A Mower ➜ kzbin.info/www/bejne/aabTZmp6fc52p9U 👉Here's Why Your Lawn Mower Is Leaking Gas - Honda Style ➜ kzbin.info/www/bejne/qqGZaHSwjLOVf5Y 👉How To Adjust the RPM Speed on a Lawn Mower ➜ kzbin.info/www/bejne/bYrVcmaHeq55pKc You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

[@kjell-richardlvdal373]

when you have a leaking float there will be gas in the oil you driving with a BOMB in my favorite beer is CB lite Norway.

[@jerrycarter97]

Fixed my leak after watching this helpful video: my mower is a Honda but your explanation did the trick, thanbks

[@ronsikes5433]

,; ++

[@Delmar829]

Sir that is the best explanation of a float operation I have heard in my entire life. You are a great instructor. Thank You

[@StevesSmallEngineSaloon]

Wow, thanks!

[@kgthesinger3152]

Delmar829 I agree

[@ELI-vm9yf]

For sure very good video 👌👌👌👍👍👍👍👍

[@shanshams6362]

​

[@pentiuman]

My MTD riding lawn mower was flooding with gas. I now know how I could've fixed it. But what I did, was to buy a replacement carburetor for $21 plus $6 shipping, and w/ a new universal gas filter, I got my mower going again. Better than ever. Easy starting now!

[@donandbethanyengie5509]

Love love love how clearly you explain things. Very grateful for the free lessons!!

[@StevesSmallEngineSaloon]

Thank You...

[@1959jimbob]

Steve, I just wanted to say thank you one more time. Just yesterday, my oldest son was telling me how frustrated he is with his newly acquired used lawnmower. It's a Briggs engine, and it hasn't run correctly since right after he got it. So, I pulled the top yesterday afternoon and first thing I saw was the coil contacts were 100% corroded. So were the contact points on the flywheel. I cleaned them off, checked the spark plug and got a good hot spark. The engine would not start at all. We found that it was missing the vacuum tube and replaced it. Still wouldn't start. We, then, pulled the carb. square style and cleaned it. I was super-duper two beer careful in handling the needle jet and put it back together. Pumped the primer bulb, pulled the cord twice, and voilà! For about 20 seconds... Gas started pouring out of the carb and primer bulb. I had forgotten to double-check the seat. I racked my brain, trying to figure out what I was missing. I pulled the carb back down and double-checked the needle jet and checked the ports and blew the ports again as a precaution. I would bet money, I blew out the seat and didn't even realize it. THANK YOU! I now know where to look and what to do once again thanks to you Steve... THANK YOU THANK YOU THANK YOU!!!!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@falconfeathers9454]

Steve, INVISIBLE HUGGIES...WOW. I am 72, female and always excellent with tools. My lawnmowers have never ever leaked gas into the air filter...until now. Your video is absolutely excellent. My problem was not how to repair...but finding the correct Briggs and Stratton carburetor parts.

[@louiegarcia7527]

ALWAYS THE # 1 SMALL ENGINE CHANNEL!ALWAYS THE RIGHT ADVICE BECAUSE OF YOUR YEARS OF EXPERIENCE. THANKS AGAIN PAL!

[@StevesSmallEngineSaloon]

Glad to help

[@tbyrdsr1]

How could anyone not like your tips. Great job as always Steve.

[@StevesSmallEngineSaloon]

Thanks 👍

[@fredaeberle6183]

I finally understand how my mower's carburetor works. Thanks Steve!

[@StevesSmallEngineSaloon]

Glad to help

[@26354mr]

Thank you! I only discovered your channel about 3 days ago. You’ve already made my life much easier. Much further frustration avoided!

[@StevesSmallEngineSaloon]

Happy to help!

[@larrygrimm2459]

watching Steve is like going to small engine school for free,been watching Steve fore awhile now ,now i don't only fix my small engines i fix family and friends small engine and i get lots of free beer doing the summer months i might add.Thanks Steve for the free schooling!!

[@StevesSmallEngineSaloon]

Great to hear!

[@kirklarson9596]

Great gob !!! My favorite beer for carb work is a cold one !!!

[@StevesSmallEngineSaloon]

Right on!

[@kdtrimble]

In a world that's crazy about some flu thing, Steve is a calming presence. Cheers bud!

[@StevesSmallEngineSaloon]

Thank You...

[@OldJoe212]

Had a B&S, 15.5 h.p. on my tractor. Was doing the same thing. Only difference was the seat was a metal cup and the needle had a rubber tip. Had to use a screw to pull out the seat, but you're right, a cheap and easy fix.

[@StevesSmallEngineSaloon]

Right on

[@caro1228]

Appreciate the video. I replaced the needle and seat on my cyclone lawn vacuum and it worked like a charm. No more leaky carburetor. I wouldn't have had a clue what to do without your video.

[@StevesSmallEngineSaloon]

Glad it helped

[@nebraskalandfishing]

Going to try and fix carb on B & S Power Washer. I hate doing stuff like this but tired of paying $60 just for someone to look at it. Thank you for the easy to follow video. Very well done.

[@StevesSmallEngineSaloon]

Thank You...

[@novisnick6928]

Thanks so much Steve! I now know what’s happening and how to fix it, I’ve watched your carb rebuild and brought a 30 year old chipper back to life! Time to replace the seat and needle, thanks again.

[@StevesSmallEngineSaloon]

Great to hear!

[@jeffreywhite1632]

Your videos are the best and very informative. Your video helped with leaking gas from carburetor, replaced needle and seat on carburetor for a Briggs and Stratton engine although float seemed not perfectly level it fixed leak. Lawnmower start fine after priming. I still have an issue were I have to prime every time I start it even if it's running for a while.

[@mikepinhero7281]

Steve, you are the man. I watched a bunch of other KZbin clips before I found this one that exactly described the problem I had with gas freely flowing out of the carburetor on my Honda HR21 lawnmower that has a carb very similar like the one you showed here. Removing the bowl, float and needle and cleaning them up fixed the problem. The only thing I would add is that I did not have to remove the entire carburetor. I dropped the bowl, float and needle off while the carb was still attached. If needed, you can lean the mower on its side to help see what is going on. After cleaning and putting the parts back on, the mower fired right up and no more gas leak. The whole fix from start to finish took less than thirty minutes. Thank you so much!

[@StevesSmallEngineSaloon]

Right on Mikey! You're Welcome...

[@radinm7258]

Thank you so much, I fixed my carb! Problem in mine was that it was sitting there with no gas for 2 years. Some of the gum actually dried up and got between the needle and the rubber seal. Overhauled the carb with totally cleanup And did the leak test as you showed while the carb was still out. Perfect, no more gas leak. And powered up on first pull!!! 😁😎👍👍👍

[@jimbohnenkamp5082]

Great video among all the other great videos you've made. Thank you for taking the mystery out of the operation of carburetors and many other small engine related equipment. I've learned a lot. I don't drink beer when I'm working on my equipment. I might forget something - or lose my sight!

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@Slimjim260]

Love Tecumseh small engine’s Steve, they run great with carb upgrade/rebuild kit.

[@kaseyredd8489]

I know these videos are more for the homeowner but I have a tool made by tecumseh to install and remove seats. 20 dollars on eBay. They work like a charm. They don't work on some briggs carbs for installing because some of the briggs use smaller seats but it will remove them. It has almost like a small crochet hook on the end. Great tool. Again I know this is more for a home owner that doesn't have a need to buy these tools but they are worth it for a mechanic. I also like to put a little oil around the seat when sliding them in. I find on some of the stubborn ones where the aluminum carb body has swollen over the years it helps it like right in. Then a little carb clean washes the oil off

[@edrose2772]

Thank you so much for a great video and I did exactly what you said and fixed my lawnmower! I have an older Murray lawnmower that was leaking gas and I hate to throw things away and would rather fix them. I would give you a hundred thumbs up if I could.

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@kennethkempf9530]

Appreciate the assistance on the problem. Ordered the part from Amazon; should have tomorrow. My favorite beer to drink while in my shed repairing lawnmower is Shiner Bock.

[@StevesSmallEngineSaloon]

Right on Kenny....

[@unclebs4732]

I like the tool description and all the little details and tricks you show us, thanks Steve.

[@StevesSmallEngineSaloon]

Very welcome

[@patriciahargraves659]

Bless you. I have been listening to so many videos trying to find out what is causing the gas leak. I hope this works.

[@StevesSmallEngineSaloon]

Good luck!

[@tomliefl7926]

Great video. By installing the new needle and seat, it fixed my problem. Also, changed the air filter gasket and O-rings on carb. Sprayed the carburator with carb cleaner. To insert the rubber seat, I used a wooden dowel of the same diameter. Thanks again. Beer = Landshark My leaky carb is now fixed. My next problem is, every time I tilt my beer bottle it leaks. I may require another video. Cheers.

[@StevenCampbell1955]

Usually I do maintenance at work where we have big vices and all of the tools handy to the benches in the sheds. Today I was able to have a cold beer at my own home while I replaced the blades on my Briggs and Stratton. By chance and good fortune I had a TWO SUNS carton delivered last week. Two Suns is an Australian beer made here in Queensland and I will share the fact that I found it so tasty that I am having another right now. Cheers, Steve.

[@StevesSmallEngineSaloon]

Right on

[@paulagee8477]

Thanks Steve for sharing your knowledge. It took me two rounds. Round 1 was a fail so I went back through the steps and realized I forgot the most important step. Round two I crack a Mickey's big mouth everything went smoothly and was more enjoyable, success. If you follow the steps exactly

[@MrRoscoj]

Very useful and great instructions. Thanks! I have two that leak and didn’t know that was so easy to repair

[@StevesSmallEngineSaloon]

Glad it helped

[@jgriff19861947]

A & W root beer and hours later I still remember what I was working on nice video

[@tacocin]

San Miguel .... It's a pale pilsen lager from the Philippines! Soooooooooo good!

[@don7406]

Great video. Thanks for showing the proper orientation of the rubber seat.

[@StevesSmallEngineSaloon]

No problem 👍

[@MikeDPlxztc]

Once you drink Beck's you'll never go back I learned that sinking carburetor trick many years ago working on outboard motors the solder joint breaks and leaks couldn't figure it out for a while but just accidentally shook it and heard the liquid inside problem solved. Steve one thousand thanks I saw your video about fixing a blower that would not rev up I have a Husqvarna blower that was almost new that was doing the exact same thing drove me nuts for a while but your video solve the problem thanks again

[@StevesSmallEngineSaloon]

Right on Mike...

[@Halenrocks5150]

Great explanation and camera work! I ordered the part from the description - very helpful. I’m drinking a Founder’s IPA while watching this video. Kudos to all who are drinking root beer or water! I’ve cut back from two-four beers down to one.

[@StevesSmallEngineSaloon]

Awesome, thank you!

[@robertpeterson2825]

Mmm Founders!

[@jjparrish]

You just saved me time and $ with that demonstration. Thank you!

[@StevesSmallEngineSaloon]

Great to hear!

[@jciamretired9767]

Steve, you're a bad ass when it comes to small engine mechanic. I tip my hat and salute to you. I've learned a lot from you by watching you on you tube beside learning drinking a good ol brewski :)

[@StevesSmallEngineSaloon]

Right on buddy! Thank You...

[@RustyNail5856]

I Watch your videos and really enjoy them , keep up the good work.

[@StevesSmallEngineSaloon]

Thanks, will do!

[@johnsmith-xi1ru]

Great description Steve! My Toro 675 is flooding bad from the carb. Took it apart 3 times, float off, valve out but no luck, still leaking bad. Got to get on ebay right away for the new bits, looks like it's a simple repair. Thanks Steve.

[@StevesSmallEngineSaloon]

Cool!

[@vruemmele]

Thanks. Very easy way to explain the principles of how it works.

[@StevesSmallEngineSaloon]

You're welcome!

[@sprinter144]

Thanks for helping me get my carburetor fixed. It was leaking when stopped and running lean while running causing it to run hot and die after a while. I replaced the seat and needle and it runs like a champ. I did have to push the seat harder than I thought to get the float to sit level so it took me a couple of tries.

[@StevesSmallEngineSaloon]

You're Welcome...

[@matthewdoyle3349]

Thanks, I was installing the float upside down, your videos are awesome 👌 thanks!

[@StevesSmallEngineSaloon]

You're Welcome...

[@HermitComics]

This fixed my problem. Drained the fuel out of the tank and carburetor before I stored it and when I pulled it out this spring filled it with fuel and it was non stop leaking. Took the bowl off and removed the float to inspect the needle and seat it all look fine. But it back together and it stopped the leak. I guess the float was just stuck in the down position. Thanks again for the video.

[@StevesSmallEngineSaloon]

You're Welcome...

[@ChuckD59]

You're a Master Demonstrator, Steve. From someone who got blue ribbons for 4-H demonstrations at our county fair! And yeah, Grolsch is always a good choice.

[@StevesSmallEngineSaloon]

Right on Chuck! Thank You...

[@libertyman3729]

Thanks for another class Steven.

[@StevesSmallEngineSaloon]

My pleasure!

[@BlitzBobby104]

Outstanding video. Thank you for this. Very thorough.

[@StevesSmallEngineSaloon]

Glad you enjoyed it!

[@mjg263]

Last summer was the first time I’ve ever seen a plastic float leak, it was on a newer Toro with a Loncin engine. Hey, it got me a 2 year old Toro for $25 and it was an easy fix so no complaints! Harp Lager for me, and plenty of it!!

[@StevesSmallEngineSaloon]

Right on

[@Gflore5]

Absolutely the BEST useful information ever! Very detailed! Thank you very much!!! 😉🤗

[@StevesSmallEngineSaloon]

You are so welcome!

[@BeanyHarnell]

Excellent clear advice Steve. 😊

[@StevesSmallEngineSaloon]

Thank You...

[@rikyjo8966]

Boom! Great information throughout. Great instruction and camera work. Thank you, sir.

[@StevesSmallEngineSaloon]

You're Welcome...

[@benmerlin9810]

Very clear video. Thanks a lot for your detailed work! Saved me some time

[@StevesSmallEngineSaloon]

You're welcome!

[@kgthesinger3152]

I think all instructional videos makers should take a cue from you. it was very clear and concise. I liked the tight camera shots.

[@StevesSmallEngineSaloon]

Awesome, thank you!

[@wildefox1478]

Great video Steve, another quick and easy way to remove the seat in a Briggs or Tecumseh carb is to screw a wood screw into the hole in the seat and pop it out.

[@johnthorp4546]

Just the video I needed! Working on that issue with a tv5002 2cycle Toro. Thanks Steve!👊👍

[@StevesSmallEngineSaloon]

You're Welcome...

[@lamle1220]

Very good lesson , Thanks Steve

[@StevesSmallEngineSaloon]

My pleasure!

[@crgmonroe]

That is my exact problem! Thank you!

[@StevesSmallEngineSaloon]

Happy to help!

[@armandocuevas7857]

Thanks to you I repair all of my gas tools . I would like to say that out there are many lake me wishing you the best

[@StevesSmallEngineSaloon]

Thanks, you too!

[@RileyNA]

My mower works fine but I'm gonna subscribe cause this guy is such a good teacher!

[@StevesSmallEngineSaloon]

Thank You...

[@ebonymusiclegends1]

Best description... I will try!!

[@StevesSmallEngineSaloon]

Best of luck

[@WilliamGregory30533]

My favorite beer for a carb rebuild is a fifth of vodka.

[@rharris7635]

Pure genius Dr. Steve!

[@StevesSmallEngineSaloon]

Thank You...

[@robertscroggins100]

knowledge is power,thanks for this process.

[@StevesSmallEngineSaloon]

My pleasure

[@rangerbandit911]

Great video Steve. Informative and helpful.

[@StevesSmallEngineSaloon]

Thank You...

[@jn7420]

Priceless video. Thank You. Going out to remove my carb!! Saving this !! :)

[@StevesSmallEngineSaloon]

Good luck!

[@user-ju3oj9ux5b]

I'm drinking a Carlton dry and my first time figuring out why soke is blowing out of my 4 stroke mower... I'm a single Mum and don't mind getting my hands dirty lol but enjoying your clips to help me fix it... 🍻

[@Freedom-ik2ij]

What an AMAZING explanation, you earned a subscriber out of me. I want to see what else I can learn from you. Thanks

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@thepragmatic6383]

Since I discovered your videos, I hardly have to visit the small engine repair shop anymore, except to buy parts. I just hope he doesn't go bankrupt because of your videos.

[@StevesSmallEngineSaloon]

LOL! Right on buddy...

[@apositivechannel5221]

Great info. Answered my question about the Honda carbs. Thank you. Keep em comin! Blessings to you sir and Prep On!

[@StevesSmallEngineSaloon]

Next video is actually on a honda carb...

[@apositivechannel5221]

Steve's Small Engine Saloon Hey thanks sooo much buddy. Now maybe I can use that to get my 125 going again...

[@kevinshea4776]

I just do a month blow test on the carb shut off, flip it over upside to shut down / flip back over and air should come out. If the O-ring gasket from the bowl is stretched, it could develop a leak! About a one beer job!. Just a Miller-Lite works for me. Nice to have a 36 pack of ML in case I run into trouble...I keep my 36 pack, next to my 740 pack of hand sanitizer now! great video Steve-O!

[@stevetackett581]

Steve you have an awesome name by the way haha. I always enjoy your videos because when it’s finished I almost always learn something, and it’s usually both a time and money saving tip that a lot of us every day do-it-ourselfers can really use. Been watching you a long time now and have absolutely no plans of stopping! Thanks again and drink a cold one for me

[@StevesSmallEngineSaloon]

Awesome! Thank you!

[@sabengco]

Thanks for sharing. Well explained.

[@StevesSmallEngineSaloon]

My pleasure!

[@thomask4836]

Steve, there's another viewer down there who is a Root Beer fan for the same reason I am. BUT when I replace a needle and seat and discover the brass float is leaking I do replace it with the plastic one. I also add vanilla ice cream so I can have a Root Beer Float.

[@cathoare8935]

Thanks heaps for this. Learned heaps

[@StevesSmallEngineSaloon]

You're Welcome...

[@jbc1042]

Steve, thank you for your informative video...great job!

[@StevesSmallEngineSaloon]

My pleasure!

[@joesmo6962]

Thanks Steve, it's that time of year again, grass is growing here in MS. Bud Light!

[@StevesSmallEngineSaloon]

Right on Joe...

[@tonym6920]

Great video Steve, thanks!

[@StevesSmallEngineSaloon]

Very welcome

[@fldays6798]

Yuengling would be my choice of beer and I do have a leaky carburetor on my edger so thank you for sharing keep the cameras rolling from Florida.🏖🏖

[@StevesSmallEngineSaloon]

Right on

[@hmwr3k3r]

Good job Steve

[@StevesSmallEngineSaloon]

Thank You...

[@moparguy37]

Excellent!! I bet its the float and seat thats making the carb leak gas out the carb on my rider! Thanks for very well detail!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@CarlWinzil]

You're a champion, mate.

[@StevesSmallEngineSaloon]

Thank You...

[@jadignan]

Great video and explanation. Many thanks for sharing your knowledge, and for motivating me to get some Grolsch -- haven't had any in over 30 years.

[@StevesSmallEngineSaloon]

Right on James...

[@rickeycooley9139]

I have a carb problem, this is very helpful, thanks. RC

[@StevesSmallEngineSaloon]

No problem 👍

[@jensenwilliam5434]

Thank you Steve !!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@Bytor-kh2nu]

Didn't know about the easy starts. Good info.

[@StevesSmallEngineSaloon]

Thank You...

[@rbergevine]

Great tutorial Steve, thanks.

[@StevesSmallEngineSaloon]

Very welcome

[@ronomdalen3186]

It usually takes me a quart pint and another small bottle to replace a float in a carburetor. Good video Steve keep up the good work

[@StevesSmallEngineSaloon]

Thanks 👍

[@matthewsharp6597]

Thank you Steve

[@StevesSmallEngineSaloon]

You're Welcome...

[@johnmax4586]

Great beer choice

[@StevesSmallEngineSaloon]

Thank You...

[@tct9mm151]

GREAT VIDEO STEVE

[@StevesSmallEngineSaloon]

Glad you enjoyed it

[@bswins9648]

4:50 After mentioning how the rubber piece could really be stuck bad, it looked like you were going to grab the Grolsh! 😂

[@cannonsanders]

You are the best Steve !!!

[@StevesSmallEngineSaloon]

Thank You...

[@clyntonramsay9057]

Thank you Steve; great help.

[@StevesSmallEngineSaloon]

Glad to help

[@buckstaffvvile9064]

Beautifully presented. Thanks.

[@StevesSmallEngineSaloon]

So nice of you

[@Norgrove.]

Great video - ironically, I've got a plastic float thats split! Same carbie!

[@ds7193]

Hey my Brother, agree with everything you said. Just wondered if you noticed when you showed the seat before you removed it , it was installed upside down. Been doing this for along time. Just hit me real quick. Enjoy your channel , and keep the videos coming.

[@1811bruce]

Thanks Steve. Great stuff!

[@StevesSmallEngineSaloon]

My pleasure!

[@robertolivero2327]

Great explanation !

[@StevesSmallEngineSaloon]

Thank you!

[@canrooster4003]

Really enjoyed your video!!!

[@StevesSmallEngineSaloon]

Thank You...

[@bentullett6068]

I tend to have a old speckled hen ale as my beer. It's a British ale and is pretty refreshing when undertaking a repair.