How To Fix A Fuel Line.

How to fix the fuel line on a 2001 Buick LeSabre.

[@chelsea.simmons]

This is exactly what I need to do. You are a life saver for sure!!

[@stacysstunningmasterpieces1570]

I was waiting on mechanic but now i am goi g to do it myself. Thank you for showing me how

[@sirj0nes1]

VERY HELPFUL VIDEO...CANT WAIT TO TRY THIS ON MY 01 LESABRE IN THE MORNING!!

[@tchrisou812]

how did it work out? I have an 01 Lesabre myself.

[@seana.5269]

I tried with the same engine and it’s super hard, I gave up lmao

[@anthonyhfe6450]

@@seana.5269 Don't give up. Just dip the fuel line in warm water for a while. Then "screw" in the connector.

[@seana.5269]

@@anthonyhfe6450 my neighbors were trying to help, they ended up melting the line and it was too short to connect lol

[@anthonyhfe6450]

@@seana.5269 Oh boy. Sorry. You can get a Dorman part that has the connector and a length of fuel line preattached to it. Then it comes with a male - make stepped coupler. So now you just cut the fuel line to the length u need, and use the coupler between the fuel line of the car and the fuel line attached to the quick connector.

[@muftahkamour5474]

you have to use 90" connector ?thanks

[@JourneyToTheTruthandTR]

Didn't need replaced. Just the 2 o rings which are super easy to take out and replace. Less than 2.00 usd, less than 60 seconds to do vs whatever you paid for the replacement part and however long you've spent replacing the hose.

[@RobertoSantiagoRodriguez]

Great video, thanks so much! Hope my fuel line has enough slack cause mine has a pin hole about 3 inches from the conector. Thanks again!

[@Rustyjames667]

How do you put it in the hose mine is so tight ,,, I tried warming it,,,,, but it .... very hard

[@anthonyhfe6450]

Oh noo, go back and put the new plastic locking clip on the fuel rail first. That thing's gonna fly right off. Also, if you can find a right angle connector that would be better as the original was a right angle one. Great vid - helpful. I have an '02 LeSabre and my son has the '00 Park Ave. Both use these connectors. Have a great day good buddy! 👍

[@anthonyhfe6450]

Some replacement connectors have the nylon locking clip pre-installed. But I didn't see it in this vid. I ordered some right angle ones so I have them on hand just in case.

[@thegoodearth7]

He said the locking clip was integral to the new connector.

[@jerrellanderson1636]

Thank you sir you are a life saver

[@victorcordero1428]

Thanks u help me a lot.keep sharing...

[@mikeb2976]

How in the hell did u get that connector back in the line? Im stuck

[@anthonyhfe6450]

Some manufacturers state to dip the fuel line in warm water to soften it up a bit. Then it goes in easier. Make sure u have the right size. Mine uses 3/8" but some are 5/16".

[@58floridagirl]

Is this a return line by chance?

[@danielworden4695]

Any trouble starting it before you fix the leak?

[@RedPillLife1966]

Hint: Under the back seat there is a fuse panel. 2 fuel pump fuses are located there. Pull them out then start the car till it dies. Drains the pressure and the fuel. You wont make a mess.

[@carlocalarco6718]

Yes, but does the engine use a bypass to the fuel pump through the oil pressure switch like on older engines? If that’s the case, pulling both fuses won’t do anything… the fuel pump will still get a feed through oil pressure switch….

[@mobilecommunicationsnetwor5268]

Please list the part number and manufacture. Thanks.

[@VOOODOOO37]

another great video

[@swp217]

Should the fuel line retainer clip not be reinstalled?

[@stevenkeirstead6305]

I wondered the same thing. It looks like the replacement didn't need that part to latch properly. It looked like a Dorman replacement.

[@AntonioGutierrez-mf3bs]

what I can get in any auto parts??

[@Corvette1658]

What happened to the black 1998 Ford Taurus wagon that she had?

[@zephmont]

Rotted out, became to dangerous to drive.

[@sparkynm156]

A Pencil Sharpener to Bevel the Edge and a little WD40 .. done in under 5 minutes..

[@ohuamenacemetooo6471]

serious question.. Whats the name of the part you replaced? Is it fuel line connector?

[@AwakeDude911]

yup u got it..

[@DavidJohnson-sk7kz]

Which part store has it? & do you know the part #? AutoZone only sales the whole line for 22$ plus tax. Thanks

[@Rosefromtheconcrete]

thank you, you are amazing

[@ontarioman100]

Grat vlog Zeph!

[@lewisdavenport7342]

don't you hate it when the light spins around and want stay where you put it?

[@levonwitherspoon5596]

Good morning is that a plastic line or a rubber line

[@phiksit]

plastic

[@tailzgaming4230]

Thanks man

[@willrobertson826]

Heat up some boiling water in microwave dip fuel line in water for a few seconds and the fittings punch right line

[@cedricmitchell425]

Do that really work

[@Toniez0]

@@cedricmitchell425 do it

[@robertmullen2480]

cheap ass plastic connector under the hood over a hot engine unbelievable these cars arent catching on fire../?#$% nice repair job though you did good job showing it thank you

[@AntonioGutierrez-mf3bs]

Part number for Chevy impala 04 ls 3800 no super charger

[@tailzgaming4230]

Anybody knows where to buy the connector?

[@mikeb2976]

O'Reilly part number 800-086

[@johnroblesjr.7102]

A hands video?

[@stevenkeirstead6305]

I thought you would have had to warm the line to get it on. Hmmm.......🤔

[@randyroadz8697]

Mine is 90 degree

[@jdbuis6684]

What about the o rings

[@HS-mv1or]

New O rings and fuel line retainer come with the new connector

[@carlocalarco6718]

Ha ha haaa. Stupid video !! The fuel line has a 90 deg end connector on it and this guy uses a straight end connector.. Lol. The fuel line has a moulded bend on it... even though the fuel line may reach, there is a constant tension side ways on the new connector end... more strain on one side of the o ring inside the connector.... I love these videos, always a good laugh....

[@dwaynebreeden2984]

and where is your instructional video?

[@carlocalarco6718]

@@dwaynebreeden2984 No time..... Lol. It’s all about common sense..

[@carlocalarco6718]

@@waynewood6545 yes, I agree

[@americanpatriot2999]

We cant hear you!!!