Excellent How-To....clear, precise, short.....all you need to know!
@FixitwithFowler7 ай бұрын
I'm glad you found the video helpful. Thanks for your great comment 👍
@AnnGostling2 ай бұрын
Thank you so much for this info. I’m a 71 year old lady and managed to replace a mitre joint on my bungalow. A bit of jiggling required due to overhanging tiles but great satisfaction when it clipped into place x
@FixitwithFowler2 ай бұрын
That's brilliant to hear. Thanks for your comment, and please consider subscribing for more great videos.
@neilfoster8148 ай бұрын
Good advice clearly explained. The Vaseline/Silicon grease tip was a real gem. Some people lather the joints in mastic or silicon sealant, but that will usually leak after a few weeks. Replacement rubber seals are the best option.
@FixitwithFowler8 ай бұрын
Thanks for your comment, I agree that if you can get the rubber seals, that's definitely the best option
@ronwhitehouse23 Жыл бұрын
What another fabulous simple, and efficient piece of commentary. And jargon free. Well done Steve. Thank you.
@FixitwithFowler Жыл бұрын
Hi, thanks for your great comment. Im glad you have enjoyed the video!
@alial-rashed85157 күн бұрын
Thank you for your valuable information and repairs
@FixitwithFowler7 күн бұрын
You are welcome, thanks for your comment and please consider subscribing to help me reach my 100k subscriber goal 😁
@peterkenworthy92198 ай бұрын
Just done mine before seeing this video Some good advice. The new joint was £3.99 which is excellent value for money. Attaching the rear part of the bracket was the hardest part. I put it in sideways then turn it around which helped . I also put in a little sealant membrane on the joint inside as I noticed the gutter had warped a little and wasn’t very flush . Everything become easy …. Once you have had the experience
@FixitwithFowler8 ай бұрын
Firstly, thanks for your comment 👍. You are right. Sometimes things are trial and error, and from that, you gain experience!
@peterkenworthy92198 ай бұрын
@@FixitwithFowlerthanks Have you any links to cutting a 3x 2 flag down a few inches with an angle grinder ?
@FixitwithFowler8 ай бұрын
I certainly have, I did a video on this a while ago! kzbin.info/www/bejne/gV7WmoGMrtKibbMsi=nodGtggVDDBPYVn4
@simonjenkins69882 ай бұрын
A great video! You have explained it really well and made the problem easy to understand. Thank you so much!
@FixitwithFowler2 ай бұрын
Glad it was helpful! Thanks for your comment!
@711honved8 ай бұрын
It is without doubt easier to work on guttering in warm weather! Those clips can be very difficult to work on otherwise.
@FixitwithFowler8 ай бұрын
Yes, they are a pain. However, someone suggested putting the in hot water for a few minutes before using them!
@DingleyDell10 ай бұрын
Had this exact problem today! Thanks for making this video.
@FixitwithFowler10 ай бұрын
No problem, I'm glad you liked the video 😊
@vkman34 Жыл бұрын
Don't use vaseline or any petroleum product as a lubricant with rubber - it will gradually eat away at the rubber. Use silicone grease instead.
@akaWooders8 ай бұрын
Anyone who's read the instructions for using a condom would know that. 😆
@akaWooders8 ай бұрын
However, I wouldn't recommend getting out the silicone grease when using a condom either, you might get a negative reaction in more ways than one! Other lubricants are available for that 'job'. 😉
@madhatter618 ай бұрын
Ky
@paulbailey76418 ай бұрын
What about washing up liquid?
@FixitwithFowler8 ай бұрын
That would work
@Listermintsluesh Жыл бұрын
Nicely explained. I've been tinkering with gutters. I've the old 100mm or 4 inch still. Impossible to get replacements I feel.
@FixitwithFowler Жыл бұрын
Thanks for your comment. Have you checked to see if there are any manufacturers details printed on it? I managed to get some unusual fittings via a google search but ended paying a lot more than standard guttering. Have you tried just replacing the seals if that's an option?
@Listermintsluesh Жыл бұрын
@@FixitwithFowler thanks. Yes I've modified lower guttering, so I can reuse the original part for the top guttering that's broke. It's all terrain stuff I believe. It's those little clips that clamp the fittings together. Unusual design but they lasted a long long time. Yeah I can see if I can't replace those seals. 🙏👋🤞
@shazreed23309 ай бұрын
Thank you for very helpful video. I feel confident to tackle this myself now. 👍🏻
@FixitwithFowler9 ай бұрын
That's brilliant, thanks for your comment 👍
@GordonStrefford9 ай бұрын
I was about to buy some sealant to cure a leaky gutter. After watching this video I realised that replacing seals or joints is the way to go! Thanks!
@FixitwithFowler9 ай бұрын
Hi, no problem! I'm glad the video has helped you out. Thanks for your comment 👍
@jenniferdoyle396926 күн бұрын
Thanks for this vid... We have 60 Yr old gutters at our apartment complex that have one leak at a joint that cannot be fixed. Three people have tried to fix it with sealant and nothing works. One told me that they are too old to find replacement seals or parts for. Can I ask your opinion please?
@FixitwithFowler25 күн бұрын
Without seeing the guttering, it's hard to tell. Normally, sealant doesn't work as it doesn't move enough like the plastic guttering.
@jenniferdoyle396925 күн бұрын
@FixitwithFowler They used silicone sealant for gutters , Tex 7 was used last time . One guy said he couldn't find seals suitable because the gutters are so old....
@FixitwithFowler25 күн бұрын
@jenniferdoyle3969 that maybe the case, are they plastic?
@jenniferdoyle396925 күн бұрын
@@FixitwithFowler Yes, plastic and quite shallow.
@FixitwithFowler25 күн бұрын
@jenniferdoyle3969 maybe you can't get them but i managed to find an older style. Maybe the style you have is no longer available in which case it would need replacing
@buvcakes5 ай бұрын
Fantastic Vaseline tip. Thanks so much.
@FixitwithFowler5 ай бұрын
Thanks for your comment. I'm glad you liked the tip.
@grahamknibbs54816 ай бұрын
Followed your tips inc the Vaseline and all went to plan, the end result was leak free👍
@FixitwithFowler6 ай бұрын
Brilliant, thanks for your comment!
@davescupper57898 ай бұрын
Good video Thanks😊 I think mine need new rubber seals 😊
@FixitwithFowler8 ай бұрын
At least they are easy to replace and cheap! Thanks for your comment 👍
@richardbarrett41042 ай бұрын
Thanks, buddy. But I cannot find the gutter brackets to fit my conservatory anywhere, in that case what can I do to fix a leaking gutter please?
@FixitwithFowler2 ай бұрын
Do not use a sealent as when the guttering moves with heat or cold it will just split. Have you tried looking for a local supplier like eurocell or a plastics place?
@monikapluta3676 ай бұрын
Hi. Can I only exchange guttery clips.My is broken and I want to fix it on my own.Can I do that?Thank you for any help.
@FixitwithFowler6 ай бұрын
Yes of course you can
@blade65339 ай бұрын
Hello, Is it possible to fix the leak of down spout connect to the gutter drain. The leak is at the top of the spout connecting to the gutter drain.
@FixitwithFowler9 ай бұрын
Hi, normally these joints just push together and habe no seals or mechanical fixings!
@bernardwarr41878 ай бұрын
Most likely the down pipe is blocked
@lawrencecollins73132 ай бұрын
Excellent ... I'll have a go.
@FixitwithFowler2 ай бұрын
It's really easy, just the clips that are really stiff, but someone suggested putting the in hot water before use
@Bluersilk5558 ай бұрын
Thanks 👍
@FixitwithFowler8 ай бұрын
I'm glad you found the video helpful!
@roachy69 Жыл бұрын
I had no idea Mats Sundin was such a handyman!
@FixitwithFowler Жыл бұрын
Lol, brilliant comment!!!
@suefowler8005 Жыл бұрын
Good advice steve keep up the good work xx
@FixitwithFowler Жыл бұрын
Thanks!!!
@michaelatkinson9461 Жыл бұрын
Very well explained
@FixitwithFowler Жыл бұрын
Hi, thanks for your comment!
@mikehopkins40403 ай бұрын
Nice and easy
@FixitwithFowler3 ай бұрын
Cheers
@michaeltravers6109 Жыл бұрын
Excellent!.
@FixitwithFowler Жыл бұрын
Thank you! Cheers!
@philiphoddell5549 Жыл бұрын
You Dont fit the gutter up to the stops, there is a line, about 1/4" short of the stops that you should be guided by...
@FixitwithFowler Жыл бұрын
It's only a short run, so it won't move too much.
@JohnFenwick-b7o5 ай бұрын
Not sure about using petroleum jelly as this attacks rubber
@westwonicАй бұрын
Agreed, should be silicone
@hosay29910 ай бұрын
what about the down pipe conection
@FixitwithFowler10 ай бұрын
They just push together so are easy to remove and replace
@hosay29910 ай бұрын
@@FixitwithFowler yes but it a drip issue>>>???
@bluestar.89385 ай бұрын
Thank you : )
@FixitwithFowler5 ай бұрын
No problem, I hope it was useful!
@jameshardy6277 Жыл бұрын
Great vid. Thanks.
@FixitwithFowler Жыл бұрын
Hi, im glad the guttering video was helpful!
@BLUEHORIZON-g2b7 ай бұрын
Nice Vid, thx !
@FixitwithFowler7 ай бұрын
Thanks for your comment 👍
@truckman41758 ай бұрын
Price of guttering now looking at that would have replaced the lot not just the joint
@FixitwithFowler8 ай бұрын
It was only £3 for the corner peice! Nit worth replacing the rest as it just needs cleaning!
@waynemoore99515 ай бұрын
Why no audio
@FixitwithFowler5 ай бұрын
There is, have you got it on mute?
@IncurablyCreative8 ай бұрын
Really helpful. Thank you. Succinct and clearly explained and a lot more useful information than the other couple of videos I watched - despite being shorter. Excellent stuff. Liked and subscribed. FYI - I did a google search for ‘how to fix a leaking gutter’ and your video was the number two recommendation. It also appeared in my suggested video list. 👍👏
@FixitwithFowler8 ай бұрын
Hi, thanks so much for your great comment, and I'm glad the video has helped you out!
@Blade1310 Жыл бұрын
The video was going so well until it missed out the vital part of getting the clips on the back side . Clearly a problematic area which probably entailed several attempts and copious amounts of strong language! I only comment as mine has exactly this problem (dripping rather than running though) and I can foresee the clips snapping at some point as they are currently refusing to budge when trying to remove them! 😂
@FixitwithFowler Жыл бұрын
If you look at about 5.40, it shows how to install the clips. However, they are a nightmare, and if the weather is cold, the guttering clips and guttering are less flexible and the guttering clips can break!
@Stan_55UK8 ай бұрын
@@FixitwithFowler Take some very hot water up with you in a flask, and tip over the clips.
@FixitwithFowler8 ай бұрын
That's a great idea, and yes, you're right about some strong language and breaking the clips. Good job, they are cheap!
@davidcaldwell49538 ай бұрын
The reason why we get so much trouble with plastic gutters. Is because they are poorly made and the rubber gaskets are also very poor.
@FixitwithFowler8 ай бұрын
Yes I agree, thanks for your comment 👍
@Mindersonagain8 ай бұрын
There is another material that can be used for guttering, a material thats use in most if not all other countries in the world which works well. It's called metal! Just a thought.😂😂
@FixitwithFowler8 ай бұрын
You can get metal in the UK normally formed on site in complete lengths. However, due to cost, most houses have this plastic guttering!
@Saint696Anger Жыл бұрын
The quality in Europe is so much better than American crap we use
@FixitwithFowler Жыл бұрын
Hi, im in the UK. These are standard guttering parts and really cheap. What do you use in America 🇺🇸?
@Saint696Anger Жыл бұрын
@@FixitwithFowler I was mainly focused on the building and roof in general. I have aluminum gutters on my house
@FixitwithFowler Жыл бұрын
Oh, right, yes, most of the houses are either rick or concrete blocks in construction. My house was built in the 1960s, and it's nearly all original.