How To Fix A Paint Run

[@melissahunt4645]

Love your videos. My house flooded last year and the contractor took off and never finished anything and left a lot of things either unfinished or just plain screwed up. We have had to do alot of things ourselves and your videos have taught me the right way to do things. So thanks!

[@Idahopainter]

Glad they have helped, thanks for watching!

[@melissahunt4645]

Home Improvement How To's We had a plumber install our bathtubs with 3 piece tub surrounds. One tub was caulked with clear caulking and it's separated and allowing water in it.... I'm taking that caulking out. Anybsuggwatikns/how to on caulking so water doesn't poor down side of tub and ruin /cause paint to peel off?

[@alexlaski3469]

I work in moulding and doors and seen a lot of pad painting/painters and you Chris are top notch as it gets. Thanks for all the great tips!

[@rickwashek478]

The master, puts out another great video. Nothing is a mistake when you know how to fix it.!!!

[@anthonyfranco7529]

thank you you've taught me a lot I came from nothing and manage to have a small 1 man company and painting is one of the services I can do thanks to you.

[@paint4you792]

Bro I wish I could find the balls to spray with only a few inches of paper protecting the overspray, you guys are freakin BOSS!

[@jsm99]

Looks great! How are you able to spray the door with it closed? Will definitely save time, though will you see a ridge of paint when it is opened?

[@WinterAurora77]

Thanks for the tip on wet sanding! Really never did understand the benefit of it before. Did so after i watched this and it made all the difference!

[@Idahopainter]

Glad it helped, thanks for watching!

[@chadrockman1762]

great video good tip, its nice to see john taking part in the videos

[@Idahopainter]

Yes, he is awesome!

[@mikeygrabon2159]

Does this method work on metal too?

[@turboflush]

Funny part.. most homeowners don't care. Most "cheap" diyers don't care for detail stuff. Imperfections drive me nuts. My wife and her family.. not so much. Runs, loss of texture around trim due to overpainting, cracks in drywall... They don't care. Love your vids and work.

[@Idahopainter]

Yes, most of the time homeowners wouldn't notice but we must fix it for the few that will! lol, thanks for watching!

[@turboflush]

Home Improvement How To's You take pride in your product.

[@stevegubala9429]

Nicely done, thanks for the tips, should you use a fine wet sponge after med.

[@osme03059]

Quick question... How do you get paint runs? I thought it was from over spray? Or is it due to the paint not sticking to the surface. Thanks love the videos.

[@Louielimardo2011]

Chris, why didn't you use the hand held sprayer?

[@NETWORKINGPROIFITS]

I was getting worried there for a moment like almost fell 1 to many passes thought another drip scan was going to happen lol. great job was on the edge of my seat lol

[@Idahopainter]

lol, thanks for watching

[@luluperezfacio9236]

Hi thanks so much for all your tips.. I need a recommendation, I hired a company to do my kitchen cabinets and the whole process has turned into total nightmare. The paint has been pealing and cracking. He has tried to fix it was but we are going on 3 times and everything seems to get worse as we retouch. I decided to go at it myself. What is a good quality spray gun that a DIY can purchase that doesn't cost an arm and a leg. Also would I need to sand and prime all over again.

[@Idahopainter]

Titan Capspray 115. You can either have a good gun or an inexpensive gun. You will have to sand or strip and start over

[@luluperezfacio9236]

Home Improvement How To's thanks 👍🏼

[@davidregan9872]

It probably cracked because it wasn't sanded. They could of used latex paint over oil paint also. My old boss and I had the same problem years ago. The woman didn't want oil paint because of the smell. It should of been primed before paint. How did it work out for you Lulu?

[@lindathibodeau9033]

I see you spray with the door shut. Doesn't that leave a ridge around the door face?

[@mikeryckman3120]

How can you spray the door properly when it's partially closed ,you can't all the hinge side

[@Idahopainter]

We were not painting the inside edges of the door it was masked off

[@a-aron1248]

Could also take a 3/8 microfiber nap for that type of fake wood finish. Takes away the need to remask since the glass frame should still look good from the initial spray

[@Idahopainter]

Thanks for sharing!

[@nathanhess3905]

Is the door partially open? How did you keep over spray from going inside?

[@Idahopainter]

It was not open

[@jonathanbutton1]

What type of paint should I be using for a fiberglass door?

[@Idahopainter]

We use superpaint from Sherwin Williams

[@danielmarquardt4341]

break out a 1/4" nap roller cover to spot touch-up after sanding no?

[@MrSmashbro13]

Thanks for all of the great tips!

[@andrewk8636]

how do you fix it in a fragile interior trim paint?

[@aepps7]

Does this process work for mistakes on spray painted furniture?

[@Idahopainter]

Yes

[@SuperWoodyboy]

Doesn't the door have to be open to spray??...or taken off the hinges ??

[@a-aron1248]

SuperWoodyboy no, just mask the frame and take out the weather stripping

[@hank10983]

Nice door looks great, chris

[@Idahopainter]

Thanks Henry!

[@dec1designs247]

Isn’t a 310 tip designed to spray on low pressure? Why so would 2800psi be necessary? I use a 210 fflp at 1200psi and get a flawless finish.

[@chrisj9008]

I was wondering. I wonder if it's a standard 310 not the FFLP 310.

[@luxpainting4545]

U don't mask any if the inside casing for over spray? We do put paper on te inside outside the door and around the wall ,and 1 piece of floor paper, rich people will see everything

[@totalproject23]

Nice, I love fine finish spray tips from Graco

[@garybraden7865]

Would you quote painting a house in Huntsville, AL?

[@garybraden7865]

I got a local quote for 8500

[@Avital4414]

How do you not get awful blisters from sanding with the sponge?

[@Idahopainter]

Don’t over sand

[@chrissimon7083]

Looks perfect now!

[@Idahopainter]

Thanks !

[@jimbola77]

Awesome fix!!!! thank's for sharing!!!!

[@hank10983]

The guy who touched the door and messed it up did you can him?

[@Idahopainter]

lol, no

[@Paul-bk6jx]

I use denature alcohol ...rub with rag..dont rub to much... rub a little let denature evap...n repeat till mils are good

[@nestormejia2692]

I know not alot contractor painter used spray tips for stucco and finish- old tips

[@Dustpuuppy]

The annotation says "repray with an older 310 tip". "repray" ? Did you feel that you needed devine intervention for this?

[@comptegoogle511]

You need to wait about 48 hours for the paint to dry before sanding if you don't want to make boogers with the paint. If you live in a fast-changing climate it's also important to anticipate how much time you have before the rain and match it with the drying time of your paint. Benjamin Moores takes longer to dry so if you don't pay attention some of the paint will end up diluted on the doorstep. So one guy on the team needs to be on the weather alert.

[@elonmusk8667]

Why did he use wet sand paper?

[@buzzyboy89]

Wow this is good info thanks

[@erikhaw7313]

I wish I could pay you to do my house out here in Cali!

[@rychei5393]

Painting on wet caulking????

[@Idahopainter]

It is doable

[@JerryCalverley]

Great time to use the Graco ultimate battery powered sprayer. I bought one on your recommendations. It is awesome for small jobs.

[@Idahopainter]

Yes it is! Glad you like it too!

[@jacqjacq5920]

Great Too! Thanks for sharing! Of course this is after I already accepted my run work. Lol

[@supertrucker1356]

I would love to show my attempt to spray doors and how horrible it went for me. Im currently looking for professionals this time

[@nestormejia2692]

Paint run easy to fix it water with sand paper 180 or 220 decent how dry is the surface.... But had to be complete dry the surface that you’re going to be sending

[@fernandosalas8589]

Iam glad someone else made a mistake so I can fix it too. That music went well with the airless sprayer machine it gave it an extra beat 😁.

[@jragster]

thanks

[@Idahopainter]

You're welcome!

[@jameseffle8170]

your older tip set at a28oo of spray,should force plenty of that stippled paint through you door knob holes.why not just put some tape on the inside. of the door where the knobs are.also the way,he painted the bottem of the door style will leave a funky build up .shot the bottem,in a lazy way.btw,you really need a wand when your that,close?i know it aint for better control

[@kandacewoods6279]

awesome scripture brother! do u pray in holy spirit?

[@aaronberk1234]

Keep the Faith! Loved the scripture reference at the beginning.

[@Idahopainter]

Thanks for watching Aaron!

[@UnaffiliatedInd.g]

nice !

[@Idahopainter]

Thanks!

[@anacondasquezze4948]

New subscriber

[@johnnyfeathers2567]

Situations like that is where I bust out my Hvlp and call it a day..

[@montycash]

hey good tip when wet sanding add some soap to the water your using it keep it going without adding water and keep it lube

[@joaquinlopez997]

mr. Idaho cant i give you a 1 time sponsor for your gift of knowledge instead of subscribing to a monthly subscription ?

[@garettroberts4064]

The guy that touched it should've been the guy to sand and fix it, he wouldn't do that twice 😂

[@Idahopainter]

lol, true

[@mramanya]

Tools and products are... Need have work on the grammar now. :-) You may want to type what you want to type what you are going to say in MS Word and let that program correct the spelling and grammar for you. :-) Love the tips, keep them coming!!

[@Idahopainter]

lol, thanks for the correction and thanks for watching!

[@Seekndstroy627]

Why do you guys spray so much? Many things yall do can be done by brush or roller. Arent you concerned with wind carrying over spray past the masking?

[@Idahopainter]

We have ways to reduce overspray and spraying leaves a better finish and is more efficient

[@kevincantwell4454]

Wet sand

[@Idahopainter]

yep

[@supertrucker1356]

I think im looking at the guy who touched it

[@ifazey2446]

Shipping cost on the websight are outragest should at least be free after you spend 50 or 100 bucks or go down in cost instead it goes up

[@Idahopainter]

Interesting, we’ll have to look into that!

[@harrishpersad3643]

I wouldn't set up a spray gun just for a door would use a paint brush an if u cannot get a really good finish with a brush u have no business being a painter

[@Idahopainter]

Interesting, okay

[@dontblameme6328]

Oooohhhh.... I bet someone got fired.

[@Idahopainter]

lol, no

[@anthonyfranco7529]

thank you you've taught me a lot I came from nothing and manage to have a small 1 man company and painting is one of the services I can do thanks to you.

[@NETWORKINGPROIFITS]

I was getting worried there for a moment like almost fell 1 to many passes thought another drip scan was going to happen lol. great job was on the edge of my seat lol

[@Idahopainter]

lol, thanks for watching

[@NETWORKINGPROIFITS]

I was getting worried there for a moment like almost fell 1 to many passes thought another drip scan was going to happen lol. great job was on the edge of my seat lol.

[@Idahopainter]

lol, thanks for watching

[@NETWORKINGPROIFITS]

I was getting worried there for a moment like almost fell 1 to many passes thought another drip scan was going to happen lol. great job was on the edge of my seat lol.

[@Idahopainter]

lol, thanks for watching